Lathe - cycle-controlled
GILDEMEISTER CTX 420

Name: GILDEMEISTER CTX 420
Brand: GILDEMEISTER
Availability: InStock

Year of construction

2008

Condition

Used

Location

Weitefeld

Lathe - cycle-controlled GILDEMEISTER CTX 420

Machine data

Machine type:: Lathe - cycle-controlled

Manufacturer:: GILDEMEISTER

Model:: CTX 420

Year of construction:: 2008

Condition:: used

Price & Location

Location:: Weitefeld

Call

Details about the offer

Listing ID:: A20998382

Reference number:: 2087-20053

Update:: 20.01.2026

Description

Working area
Circulation dia. above bed slide way cover: 680mm
Circulation dia. above cross guide cover: 565 mm
Facing traverse: 324 mm
Longitudinal path: 600 mm
Main spindle
Spindle nose dia: 170 h5 / 220 h5 mm
Bar dia. Max: 65 / 90 mm
Spindle nose dia. in front bearing: 120 / 150 mm
Spindle boring: 79 / 110 mm
Chuck dia: 200 / 250 / 315 mm
Drive rating S1 100% duty cycle: 25 / 33 kW
Rotational speed range: 5000 / 4000 r.p.m
Max. torque S1 100% duty cycle: 270 / 375 Nm
Salient rotational speed: 900 / 850 r.p.m
C axis (main spindle)
Rotational speed: 250 r.p.m
Stopping torque: 200 Nm
Division accuracy: 0,025 deg.
Compound slide X/Z/Y
Facing traverse X: 260 / 1852 mm
Longitudinal path Z: 635 / 6202 mm
Ball spindle Z (dxh): 40x15 mm
Vertical path Y: ±40 mm
Ball spindle Y (dxh): 40x5 mm
Rapid traverse speed X/Y/Z: 60/15/45 m/min
Feed force X/Y/Z: 3,5/7/7 kN
Tool holder
Number of tool stations: 12
Tool mounting cylinder shaft (DIN 69880): 40 mm
Tool disk, axial tool holder pitch circle dia: 370 mm
Number of driven tools: 12
Drive rating max. 100% duty cycle: 4,9 kW
Torque 100% duty cycle: 10,5 Nm
Rotational speed range: 4500 r.p.m
Tailstock
Tailstock traverse path: 580 mm
Tailstock force: 8 kN
Tailstock mounting: MT 5
Rapid traverse speed Z2: 6 m/min
Part accuracy for positioning: =/< 10 mm
Hydraulic
Contents: 40 l
Pump capacity: 2,2 kW
Max. pressure: 80 bar
Pressure for clamping unit, tailstock: 10-60 bar
Ijdpfjya Iirex Amisib
Coolant unit
Contents: 210 l
Pump capacity: 1,7 kW
Feed rate at 6 bar: 20 l/min
Electrical energy requirement
Connected rating: 50 kVA
Operating voltage: 400 V
Frequency: 50 Hz
Fuses (slow blow/VDE 0100) perm: 80 A
Voltage fluctuations at 400 V: 6% - 10%
Machine dimensions
Dimensions (LxWxH) with chip conveyor: 4350/2460/2080 mm
Weight without chip conveyor/chip bath: ca. 6.000 kg
Workplace based constant noise pressure level:
- (DIN 45635 part 1-04.85 (ISO 3740-1980), measured
as a chip removing cycle as per DIN 45635
part 1601-07.78): 77 db (A)
- in idle running as per DIN 45635 part 1601-07.78: 78 db (A)

Seller

Registered since: 2018

19 listings online

Call

Send inquiry

Telephone & Fax

+49 711 5... show

+49 7154 ... show

Fax:

These listings may also fit your interest.

Listing

Lüdenscheid

1,108 km

CNC lathe
GILDEMEISTERCTX 420 Linear

€21,500

Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2003, operating hours: 7,600 h, functionality: fully functional, turning length: 600 mm, turning diameter: 324 mm, Control: HEIDENHAIN CNC Pilot 4290 Max. spindle speed: 5,000 rpm C-axis Max. bar capacity: 65 mm Travel: X = 260 mm, Z = 630 mm Turret with 12 stations (all driven, max. 4,500 rpm) Tailstock Tailstock travel: 580 mm Ijdsy Ry Txepfx Amisib Chip conveyor Dimensions (LxWxH): 3,500 x 2,440 x 2,100 mm (without chip conveyor) Weight: 6,000 kg Power-on hours: 32,600 h Spindle hours: 7,600 h

See details

Listing

5-Axis CNC Machining Center Deckel Maho DMG DMU 70 eVolution

Germany

1,293 km

5-Axis CNC Machining Center
Deckel Maho DMGDMU 70 eVolution

Call

Year of construction: 2004, condition: ready for operation (used), X-axis: 750mm, y-axis: 600mm, z-axis: 520mm, C-axis: 360°, B-axis: 180°, max. spindle speed: 18,000/min, control: Siemens SINUMERIK 840D powerline, connected load: 55kVA, length: 4603mm, width: 5250mm, height: 2785mm, weight: approx. 9t, operating hours power on: approx. 65,000h, spindle hours: approx. 19,000h. No defects known, internally maintained, without maintenance reports, with documentation, rotary table, high-pressure internal cooling and Bluhm spindle probe. An inspection on site is possible. Isdsylbq Hjpfx Amisib

See details

Listing

Root

1,371 km

CNC lathe
GILDEMEISTERCTX 420 linear

Call

Listing

Germany

1,029 km

CNC Lathe
GILDEMEISTERCTX 420 linear

Call

Condition: used, Year of construction: 2007, Technical details: turning diameter: 325 mm Iiedpfsvgb Epsx Amijb turning length: 600 mm total power requirement: 35 kW spindle drive: 25 kW spindle turning speed range: 5000 U/min speeds of tool: 4500 U/min rapid traverse X-axis: 60 m/min diverse toolholders: VDI 40 rapid traverse Z-axis: 45 m/min weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,5 x 2,5 x 2,1 m Machine with SIEMENS 840 D control power line with shopturn - C and Y-axis, driven tools - bar loader IRCO ILS-RBK - coolant device with coolant throough revolving head - Revolver - counter spindle - chip conveyor - collet clamping - part catcher *

See details

Listing

Einöden

1,656 km

Milling machine
EmcoVMC 300

Call

Listing

Aach

1,354 km

CNC lathe
GILDEMEISTERCTX 420 linear

Call

Condition: reconditioned (used), Year of construction: 2006, CNC Lathe GILDEMEISTER CTX 420 linear Equipped with Siemens 840 D powerline control Year of manufacture: 2006 Max. turning diameter: 324 mm Max. turning length: 600 mm Max. swing diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4,500 rpm Including the following accessories: Sliding guard with interior lighting 12-position turret with 12 driven stations Y-axis, C-axis Tool measuring device Parts catcher 3-jaw hydraulic chuck 210 mm with foot switch Hainbuch hydraulic collet chuck IRCO Breuning RBK 10012 bar feeder Signal lamp Tailstock with quill Chip conveyor Iedjxzt Dcspfx Amieib Oil mist extraction Coolant system with high-pressure coolant (IKZ) and belt filter unit Operating manuals

See details

Listing

Ennepetal

1,084 km

CNC Lathe
GILDEMEISTERCTX 420 linear

Call

Condition: used, Year of construction: 2003, turning diameter 0324 mm turning length 600 mm control 840D shop turn turret head 12 pos. swing over bed 680 mm spindle turning speed - stepless 0 - 5000 rpm swing diameter over bed slide 565 mm spindle bore 79 mm drive capacity - workpiece 25 kW x-axis 260 mm y-axis +/- 40 mm z-axis 635 mm rapid traverse 60/15/45 m/min toolpiece turning speed range 4500 U/min total power requirement 50 KVA weight of the machine ca. 6,5 t dimensions of the machine ca. 4,5 x 2,4 x 2,1 m Iodpjyi Hpiofx Amieib Machine has C-axe, Y- axe and live tooling. Control: Siemens 840 D shop turn. Machine has tail stock and power chuck.

See details

Listing

Germany

1,414 km

Universal Milling Machine
MAHOMH 800 W

Call

Condition: used, Year of construction: 1992, Technical details: x-travel: 800 mm y-travel: 550 mm z-travel: 500 mm spindle taper ISO: SK 40 control: Philips 532 quill stroke vertical: 80 mm turning speed range: 0-600 und 600-4000 steples U/min feed:: 1 - 3000 mm/min. rapid traverse: 6 m/min table surface area: 1100 x 600 mm table feed: 1 - 3000 /stufenlos mm/min switched on hours: 82194 h total power requirement: 9,6 (12 kVA) kW weight approx.: 4200 kg Iodpsu Nda Eofx Amieib dimension machine xH: 2,9 x 2,2 x 2,5 m The machine is located in the technical department. further technical data: - vertical adjustment table (z-axis) 500mm - Headstock throat depth: min./max.: 200 / 750 mm Equipment: -coolant tank with pump -Manual control unit (hand operated) -linear measuring system Heidenhain *

See details

Listing

CNC Lathe GILDEMEISTER CTX 420 Liner V 6

Dorsten

1,046 km

CNC Lathe
GILDEMEISTERCTX 420 Liner V 6

Call

Condition: used, Year of construction: 2007, turning diameter 325 mm turning length 600 mm control Siemens type 840D turning speeds 5000 U/min power capacity 25 kW total power requirement 35 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,5x2,5x2,1 m Tool speed: 4500 rpm X-axis rapid traverse: 60 m/min Z-axis rapid traverse: 45 m/min Machine with Siemens 840 D powerline with Shopturn - C and Y axes, driven tools - IRCO ILS-RBK bar loader - Coolant system with internal coolant supply - Paper belt filter - Partial hollow clamping device - Oil mist separator - Counter spindle - Parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Iiedpfeyquwkjx Amiob If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

See details

Listing

CNC turn-mill center GILDEMEISTER CTX 420

Dieburg

1,240 km

CNC turn-mill center
GILDEMEISTERCTX 420

Call

Condition: excellent (used), Year of construction: 2007, CNC Lathe GILDEMEISTER CTX 420 Linear 2007 Siemens 840 D Technical specifications: * Turning length: 600 mm * Turning diameter: 680 mm * Spindle bore: 79 mm * Spindle speed: 5000 rpm * Spindle power: 25 kW * Chip conveyor: Yes * Variable spindle speed: 5000 rpm Iiodpfx Asw Slfbjmijb Main spindle with bar capacity: Ø 65 mm Self-centering Autoblock chuck: Ø 250 mm

See details

Listing

Vertical machining center MIKRON HAAS VCE 750

Root

1,371 km

Vertical machining center
MIKRON HAASVCE 750

Call

Listing

CNC lathe with Y axis Gildemeister CTX 420 Linear

Düsseldorf

1,048 km

CNC lathe with Y axis
GildemeisterCTX 420 Linear

Call

Listing

CNC Turning- and Milling Center GILDEMEISTER CTX 420 linear V6

Oelde

1,122 km

CNC Turning- and Milling Center
GILDEMEISTERCTX 420 linear V6

Call

Condition: used, Year of construction: 2004, turning diameter max. 560 mm turning length 600 mm control 840D powerline Siemens greates pass round over bed 680 mm Swing dia. over traverse guideway 565 mm centre distance 620 mm turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 25 / 37 kW max. Torque 390 Nm spindle nose 170H5 spindle bearing diameter 120 mm usable bar diameter 65 mm max. chucking diameter 250 mm C-Axis 0,025° / 360 ° Spindle speed range subspindle 20 - 7.000 min/-1 power capacity - Sub spindle 25 / 33 kW max. Torque 213 Nm spindle bearing diameter 90 mm spindle bore 57 mm spindle nose 140H5 C-Axis 0,025° / 360 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tools max. 4.500 min -1 power capacity - driven tools 12,2 kW tool taper VDI 40 DIN 69880 Tool dimensions with square shank 40 mm x-axis 185 mm y-axis 80 mm z-axis 620 mm rapid traverse X: 60 m/min rapid traverse Y: 15 m/min rapid traverse Z: 45 m/min total power requirement 50 kVA weight of the machine ca. 7 t dimensions of the machine ca. 6,0 x 3,0 x 2,5 m CNC Turning- and MillingCenter Iisdpfx Amewmf Tpjisb GILDEMEISTER - CTX 420 linear V6 - Main and sub spindle - Tool drive - C axis / Y axis - Partial hollow clamping device - ShopTurn - Surface - Package bar processing consisting of: - Hollow clamping device 66mm - Workpiece picking device - Incl. 2x driven tools - Incl. 4x double tool holders - Incl. 4x tool holders - Incl. 83x tools

See details

Listing

CNC-swiss type automatic lathe STAR Micronics SV-38R

Tiefenbronn

1,293 km

CNC-swiss type automatic lathe
STAR MicronicsSV-38R

Call

Condition: excellent (used), Year of construction: 2014, operating hours: 31,000 h, functionality: fully functional, CNC-swiss type automatic lathe brand: STAR type: SV-38R new in: 2014 equipped with: FANUC 31i control, turret with B, Y, X, and Z axis, driven tools, 2x C-axis, Y2 axis, subspindle, high pressure pump, oil mist, backworking, chip conveyor, parts conveyor, fire extinguishing system, Iodjytq Ahspfx Amioib useable for short and long parts automatic bar loader FMB TURBO 5-55

See details

Listing

Cnc turning and milling center DMG GILDEMEISTER CTX420 Linear V4

Czechowice-Dziedzice

1,910 km

Cnc turning and milling center
DMG GILDEMEISTERCTX420 Linear V4

€44,900

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Hello, I am offering for sale a renowned brand CNC lathe: DMG GILDEMEISTER CTX 420 Linear V4 with C-axis, Y-axis, and driven tools. The machine is in excellent technical and visual condition. _ Iijdpfx Amoxcupcsijb Type: CNC Lathe Manufacturer: DMG GILDEMEISTER Model: CTX 420 V4 Linear Control: HEIDENHAIN 4290 + DIN PLUS interface for program generation Country of manufacture: Germany Year of manufacture: 2004 _ Machine specifications: - Turret: 12 tools with VDI 40 holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Y-axis - Driven tools - Max turning length on Z-axis: 635 mm - Max turning diameter on X-axis: 325 mm - Spindle chuck BERG, diameter 200 mm - Max bar diameter: 66 mm - Coolant system - Hydraulic tailstock, programmable - Chip conveyor - Spindle drive power: 21 kW - LNS bar feeder - Documentation (DTR) - Machine weight: 6 tons _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We offer our own stationary and mobile service support - We have sold over 700 DMG machines - We can commission the machine at the customer's site - Operator training and delivery included in the price - All our machines undergo a professional technical inspection and are ready for operation - The machine can be purchased via installment plan or leasing.

See details

Advertise here