Used Gildemeister Gds 65 for sale (247)

Condition: ready for operation (used), Gildemeister 9.635.839 High Board 25-355 , serial no. according to photo, used, normal signs of wear, 100% functional Bwedpfx Aei D U Tgsdxsw

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Gildemeister NEF 320 K lathe cycle-controlled Siemens Sinumerik 810 DL control built in 2001, very good original condition Technical data: >> Built in 2001 >> Swing diameter over bed: 320 mm >> Swing diameter over slide: 150 mm >> Distance between centers: 750 mm >> Plane travel: 185 mm >> Feed X: 4 m/min >> Feed Y: 4 m/min Bwjdpfx Aov Aix Asdxew >> X rapid traverse: 8 m/min >> Y rapid traverse: 10 m/min >> Spindle head DIN 55027 size 6 >> Spindle bore: 52 mm >> Drive power 100%: 7 kW >> Speed range: 14-3550 (2 levels) rpm >> Tailstock quill diameter: 70 mm >> Tailstock quill stroke: 120 mm >> Tailstock quill taper: ISO MK 5 >> Dimensions: 2600 X 1440 X 1440 mm >> Weight of the machine approx.: 2.0 t Accessories and equipment: >> 1 three-jaw chuck Röhm 200mm with 2 sets of jaws >> Mulifix size B with 4 steel holders >> Operating instructions, electrical plans >> Machine feet About the machine: Offered is a Gildemeister NEF 320 K lathe with automatic cycles, built in 2001, in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Gildemeister runs very quietly even at high speeds. This newer generation of lathes is very user-friendly and surfaces can be produced as if they were ground. The machine comes from a training workshop of a large company. Take the opportunity to inspect this machine on site under power and convince yourself of its condition.

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Gildemeister lathe -Tip height: 270 mm -Quill: electrically driven -Foot switch -Recording: MK5 -Number: 1x tailstocks available -Price: per piece -Dimensions: 820/250/H400 mm Bodsdkru Hopfx Adxeww -Weight: 136 kg

Condition: used, Year of construction: 2019, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.666h spindle hours. Bwsdpjwgi D Esfx Adxew The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: used, Year of construction: 1985, core drilling diameter max. 18 mm bore depth 320 mm swing diameter mm total power requirement 33 kW weight of the machine ca. 6 t dimensions of the machine ca. m Bjdpfx Ajt Hwvaedxjww

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, turning length: 600 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 635 mm, Machine with C-axis and driven tool positions TECHNICAL DETAILS Swing diameter: max. 505 mm Turning diameter: max. 320 mm Turning length: max. 600 mm Control: Siemens Sinumerik Powerline 840D Spindle Speed range: max. 5,000 rpm Bar capacity: 65 mm Travel paths x-axis: 250 mm Bedpevprmvjfx Adxsww z-axis: 635 mm Tool Number of positions in the tool changer: 12 Tool holder: VDI 30 MACHINE DETAILS Dimensions (L x W x H): 4,296 mm x 1,715 mm x 1,770 mm Machine weight: 4,500 kg Incl. chip conveyor

Condition: ready for operation (used), Dataram DR-717 32K x 17 card (Gildemeister) , serial no. according to photo ,used, normal signs of wear, 100% functional Bodpoi D Un Rjfx Adxoww

Condition: excellent (used), Year of construction: 2011, CNC twin-spindle turning center Control: CNC path control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and with ShopTurn 3 G TECHNICAL DATA Max. turning diameter 340 mm Spindle distance 1470 mm Turning length 1135 mm Swing over bed 700 mm Swing to tool carrier 2540 mm Travel paths: X1 – Tool carrier I 270 mm Y1 – Tool carrier I 120 mm Z1 – Tool carrier I 1200 mm X2 – Tool carrier II 195 mm Y2 – Tool carrier II 80 mm Z2 – Tool carrier II 1200 mm X3 – Counter spindle slide 180 mm Z3 – Counter spindle slide 1200 mm Main spindle Integrated spindle motor ISM 102 Drive power (100/40% duty cycle) 40/48 kW Torque (100/40% duty cycle) 570/680 Nm Speed range 0-4000 rpm Bar diameter 102 mm Draw tube inner diameter 104 mm C-axis and spindle brake (angular resolution) 0.001° Counter spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle) 25/32 kW Torque (100/40% duty cycle) 280/380 Nm Speed range 0-5000 rpm Bar diameter 65/75 mm C-axis (angular resolution) 0.001° Slide 1 Tool carrier (direct drive) Number of tools 12 Tool holder diameter VDI (DIN 69880) 40 mm Maximum power (100/40% duty cycle) 10.9/14.2 kW Maximum torque (100/40% duty cycle) 26/34 Nm Speed range 40 – 10,000 rpm Slide 2 Tool carrier (direct drive) Number of tools 12 Tool holder diameter VDI (DIN 69880) 40 mm Maximum power (100/40% duty cycle) 10.9/14.2 kW Bwsdewcd S Njpfx Adxjw Maximum torque (100/40% duty cycle) 26/34 Nm Speed range 40 – 10,000 rpm Slide 3 Rapid traverse speed X/Z axis 30/45 m/min Tool resolution Z axis 0.001° Feed force (40% duty cycle) X/Z axis 16/13 kN EQUIPMENT/ACCESSORIES  IRCO ILS-RBK 100/16 short-bar loader  Various main spindle reducers  NC-controlled workpiece retrieval device from both the main and counter spindles The device consists of an NC-controlled *Horizontal axis *Swivel unit *Vertical axis *2-jaw gripper for interchangeable gripper jaws  Conveyor belt for removing workpieces from the machine  8/20 bar coolant system with immersion cooler  Chip conveyor  Oil mist extraction  Control cabinet cooling unit (up to 40°)  Counter spindle slide  Easy-Tool monitor  1 collet chuck for quick-change clamping head size 100 for the main spindle  1 collet chuck for quick-change clamping head size 100, Nova Achsfix for the counter spindle  Approx. 40 various quick-change clamping heads size 100 (complete inventory)  Pneumatic tool changer, ø 100 mm  Approx. 50 various tool holders, fixed and driven (complete inventory)  Mounting elements  Documentation

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump Bodpfx Adjb Uht Esxsww -Hydraulic unit comes from a Gildemeister lathe -Drive: 1.1 kw -Speed: 1410 rpm -Max. Pressure: 25 bar -Liter output: l/min -Filter -Hydraulic tank -Dimensions: 500/680/H660 mm -Weight: 98 kg

Condition: used, Year of construction: 2019, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.650h spindle hours. The machine is in a well-maintained condition and can be inspected under power. Bjdpfxowf D S Is Adxsww For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: used, Year of construction: 1991, turning diameter 42 mm turning length 250 mm control total power requirement kW weight of the machine ca. t dimensions of the machine ca. m CNC-lathe with bar feed with Sameca bar feed Bjdpfxjt Hwz Aj Adxsww

Condition: used, Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Diameter of rotation: max. 465 mm Length of rotation: 1050 mm Diameter when turning: 680 mm Bwsdov Epzvopfx Adxsw Diameter of the chuck: 325 mm Travel x: 300 mm Travel z: 1050 mm Control: Fanuk Series 21I-TB Speed range: Max 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Diameter of the bearing in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Pin stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40

Condition: ready for operation (used), Gildemeister VAP4 / VAP 4 AES 1 / 0.881.051-2 card SN 5899090, used, normal signs of use, 100% functional, scope of delivery as per photos Bwjdpfjtztfgox Adxew

Condition: good (used), Year of construction: 2000, Lot of boring tools for boring mills Manufactured by Gildemeister-Microbore - Komet Spindle mount ISO-BT 50 MK 5 Bwsdewd Tkkepfx Adxew In good condition.

Condition: used, Tool holder, milling holder, milling tool Bwjdpfx Aofnbynodxew -Intake: SK50 5 pieces -Sizes: see pictures -Price: complete -Dimensions box: 400/300/H270 mm -Weight: 42.1 kg

Condition: used, Year of construction: 2021, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 6.944h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. The machine video from the production plant will be shared on request. Bwsdswf D Szopfx Adxjw - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Z-axis: 300 mm, TECHNICAL DETAILS Chuck diameter: 250 mm X-axis: 800 mm Z-axis: 300 mm Spindle Spindle head: 170 h5 Spindle diameter at front bearing: 120 mm Spindle bore: 79 mm C-Axis Bwsdpfx Adjwrr T Tsxsw Number of tool stations: 12

Condition: reconditioned (used), functionality: fully functional, GILDEMEISTER GS20 LATHE VARIANT 25 MM ELECTRICALLY AND MECHANICALLY REFURBISHED -REFURBISHED PNEUMATIC SECONDARY CHUCK -NEW AIR TREATMENT UNIT AND SOLENOID VALVES -RADIAL AND AXIAL SLIDES IN POS. 1-2-4-5 -WORKPIECE PICK-UP AT POS. 6 MECHANICAL OVERHAUL: 1. TURNTABLE OVERHAUL Bwedpfxow Sxptj Adxjw 2. SLIDE OVERHAUL 3. FRONT AND LEVER OVERHAUL 4. SPINDLE OVERHAUL 5. COLLET OPENING/CLOSING SYSTEM OVERHAUL 6. THREAD CUTTING UNIT OVERHAUL ELECTRICAL OVERHAUL: 1. NEW SIEMENS S71200 PLC AND SIEMENS KTP700 PANEL 2. CAM ENCODERS 3. RELAY REPLACEMENT

Condition: good (used), Year of construction: 2007, functionality: fully functional, Heidenhain control system Main and counter spindle Main spindle bar capacity: 90 mm Capto C6 milling spindle 36 tool positions Lower turret, 12x VDI 40 80 bar internal coolant supply Bsdowax A Rjpfx Adxeww Many accessories 1.5 m Breuning bar loader

Condition: used, Year of construction: 1995, Machine in parts for sale spare parts ..... CNC lathe, make GILDEMEISTER Type: CTX 600, year 1995 Forkardt chuck 315 mm, tool turret Bwodpenximuofx Adxow Tailstock, steady rest Headstock Guide covers and sheets Motors Machine in individual parts for sale ..... Please ask what you need and we will send you an offer.

Condition: used, Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool Bedpjb A Hvaofx Adxoww -Adjustment: SK50 -Tool holder: M20 -Price: for both recordings -Weight: 16 kg

Condition: good (used), Year of construction: 1970, Gildemeister 6 spindle automatic lathe AS 32-6 - Spindle stop device - Pick-up device pneum. Accessories against surcharge - Cross hole drilling device - Thread cutting gear - Thread cutting device - optional milling device, cross-cutting device - Saving conveyor Bodsrrgr Aopfx Adxsww Machine was overhauled at the end of the 80s

Condition: excellent (used), Year of construction: 2008, DMG CTX 510 Sinumerik 840D Machine in perfect condition, equipped with bar feeder and C axis Bwsdpfsr Ak S Nsx Adxsw Spindle operating hours: 6720 Spindle bore: 95 mm Collet chuck Forkardt D=100 mm max; I also have a brand new Hainbuch SK100 collet chuck for this machine Tool holder VDI 40

Condition: excellent (used), CNC vertical lathe Gildemeister CTV 250 Working area: Chuck diameter: 250mm X-axis: 800mm Z-axis: 300m Spindle head: 170 h5 Spindle diameter in the front bearing: 120mm Bwodevuqm Sjpfx Adxew Spindle bore: 79mm C-axis Number of work stations: 12 Videos available!!

Condition: good (used), Year of construction: 1985, CNC Lathe GILDEMEISTER Type: N.E.F. 1020 Year 1985 Control EPL 2 Turning diameter over bed : 1020 mm Turning diameter over face plates : 600 mm Bwedpfx Ajqc Ul Ajdxsw Turning length : 3000 mm Spindle speed : 5 - 1120 rpm Motorl.30 KW Spindle bore : 128 mm Tool turret Parat size : 4 with 10 holders Faceplate : 900 mm, steady rest, drill stand, chip conveyor, complete machine documentation and parameters available. Machine disassembled in stock. Complete weight approx. 12 000 KG. Further data see data sheets .