Used Gbs 185 Eco Autocut for sale (19,412)

Condition: used, machine/vehicle number: 006385, Max. machining width: 1000 mm Godpfx Aaewcybgscouh Min. machining thickness: 3 mm Working Table: Fixed pass height No. Operating units: 2 Nr

Condition: good (used), Clamping cylinders, hydraulic clamping cylinders, hydraulic clamps, pneumatic clamps, air cylinders, clamping cylinders for power chucks -Manufacturer: Röhm Gamet, pneumatic clamping cylinder for power chucks -Mounting: Thread M60 -Bolt circle: Ø 88 mm / M8 -Dimensions: see photos -Dimensions: 267/185/H235 mm Godpfx Aov Twkzsaceuh -Weight: 18.2 kg

Year of construction: 2020, operating hours: 13 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 623, Almost unused Urschel Tanslicer machine. We used it for slicing bread chips, but it can also be used for slicing vegetables, cucumbers, etc. It looks brand new. Originally purchased from Urschel Switzerland. Blades can be exchanged. Gujdpfxow Afvcj Aacjh

Condition: new, machine/vehicle number: 22069, total height: 23,000 mm, total length: 36,600 mm, total width: 9,400 mm, working height: 420 mm, input frequency: 50 Hz, input voltage: 400 V, overall weight: 2,100 kg, The electro-mechanic case clamp VK011 allows a fast assembly of cabinets without having to make pre-adjustments on the clamp. The strong clamping plates of the VK011 enable all-over clamping of the cases to achieve the highest quality results. A clamping power of up to 2.300 kg can be generated in the press. - Vertical press plate (150 x 50 mm) - Horizontal press plate (150 x 50 mm) Guodpsgqfpfofx Aacsh - Preselection of pressing time - Max. pressing pressure 1,800 kg (horizontal), 2,300 kg (vertical) - Machine operation via joystick - 2-hand operation Advantages: - High flexibility:Pressing pressure is variably adjustable. Great variety of different cabinet dimensions possible - Maximum output due to positioning speed of up to 54 mm/sec (ECO up to 29 mm/sec) - Intuitive operation via joystick - High safety standards due to CE-conformity e.g. 2-hand-operation, security fence etc. - Sturdy design, linear guides and ball screws lead to the highest precision - Plug & Play

Year of construction: 1983, condition: refurbished (used), Baader 185 file + skin machine for whitefish is suitable for large & medium-sized cod, Haddock, Gråsej, Merluza etc. Capacity 24-32 fish / minute, Gsdpfx Aoifpz Ioacouh Year mod 1983. Dimensions 690 x 185 cm H 180 cm.

Year of construction: 2025, condition: new, Weed brush with protective shield for petrol brushcutters Innovative set for professional and safe weed removal, suitable for petrol brushcutters, manufactured in the Netherlands. Gujdpfow Rv Azex Aacoh The complete set consists of a brush (1) and a protective guard (2) – a description of the set components is provided below. When placing an order, please specify the exact model of your petrol brushcutter in order to select the appropriate adapter for mounting the guard. Retail price for the set (brush + guard + 1 selected adapter for your brushcutter model), including delivery within Poland, is €950 net. Full set description: (1) ECOBrush – Steel brush for petrol brushcutters, designed for professional applications. Rugged steel, durable construction, improved safety, and extended service life thanks to the changed brush angle and only three ultra-strong bundles. Easy and quick bundle replacement, compatible with all brands and types of brushcutters (can also be ordered as a standalone brush without guard). Weight: 1.4 kg. Delivered with 6 replaceable bundles (see video link below), bundle length: 16 cm. You may use 2, 3, 4, or 6 bundles on the head; under normal working conditions, 3 bundles are recommended. The brush operates with brushcutters from 2 HP – recommended to use 3 bundles; for models above 3 HP, 4 or 6 bundles can be used. The ECOBrush head is easy to install, eco-friendly, and efficient. Bundles are set at a slight angle, which makes operation ergonomically superior to conventional brush heads, where bundles are mounted at a 90° angle. (2) EASYPROTECT guard for protection against stone impact and debris for the ECOBRUSH brush head. Supplied complete with three support wheels. For efficient, economical, and safe weed removal, the EASYPROTECT guard provides optimal protection against stones and other ejected material. A part of the guard can be lifted and locked, enabling precise weeding along walls, curbs, or barriers. Using EASYPROTECT expands the operating possibilities while significantly reducing the risk of injuries, damage to vehicles, and potential compensation claims. The system ensures operator and bystander safety, making it suitable for work in busy and car park environments (protects cars from damage). The ideal solution for landscaping, agriculture, municipal services, companies, and individual customers. Quick installation in just a few steps! Weight: 11.5 kg, dimensions: 56 x 22 cm. Included in the price: the appropriate adapter for the following petrol brushcutter brands: HUSQVARNA 28 mm, 34 mm STIHL FS 260, 360, 410, 460, 490 and STIHL FS 550 as well as STIHL FS 130, 310, 350, 450, 480 Also for example: ECHO SMR 350, ESL / ESU, ES 410, 510, 580 Please always specify the make and model of your machine in your inquiry so that we can provide the correct adapter for mounting the guard to your brushcutter shaft. Set of 6 replacement steel bundles: 40 € net Set of 6 replacement PP or nylon weed-removal bundles for sensitive surfaces: 40 € net

Condition: excellent (used), Self-loading press for gluing Orma LS/ECO/CA 30/13 Working length 3000mm Working width 1300mm Automatic material loading Glue application system Shelves heated with oil to 130C Gjdpfov Nhx Usx Aacsuh Top pressure force 57t Side pressure force 9t Year of production 2001 CE certificate

Condition: used, Year of construction: 1996, total height: 2,730 mm, total length: 5,550 mm, total width: 1,600 mm, Weight: 1.000 kg Panel saw Elcon 185 RSXL Maximum cutting width 4150mm Maximum cutting height 1850mm Maximum cutting depth 80mm 3kW motor 4200 rpm Saw blade diameter 300mm Air pressure required 6 bar Machine dimensions: 5550 * 1600 * 2730mm (L * W * H) - Year: 1996 - Documentation available: Yes - Transport dimensions: 5550mm x 1600mm x 2730mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Gjdpfewnhmzjx Aacouh Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2025, operating hours: 50,000 h, functionality: fully functional, overall weight: 17,000 kg, rotor diameter: 640 mm, rotor length: 2,500 mm, power: 247 kW (335.83 HP), rotational speed (max.): 400 rpm, Shred & Granulation Line - Approximate Operating hours 50,000 hours per machine. Very good condition. - Average output is 3.5 tonnes per hour Godpsxg Thljfx Aacsuh - Used exclusively for clean plastics such as PP and HDPE - Includes zig zags, double bagging station - Includes chiller, control panel, and 2x units of Eriez metal removal system at bagging stations - Immaculately maintained and regularly serviced Zerma Granulator (2018) - 1600-800-3 ×7 model. 185KW. With double bagging station, zig zag and conveyor with built-in metal detection (Model K1058). Vecoplan Shredder (2009) - AZ 2500 ECO Drive. 247KW - Shredder with pre-feed conveyor and adjoining conveyor with overband ferrous removal system. Includes spare cutters and counter knife

Condition: used, overall weight: 33,000 kg, maximum load weight: 22,180 kg, axle configuration: 2 axles, loading space length: 11,500 mm, loading space width: 2,450 mm, loading space height: 2,410 mm, first registration: 01/2012, next inspection (TÜV): 06/2026, Year of construction: 2012, total width: 2,600 mm, total height: 3,750 mm, INTERNAL DIMENSIONS: LEFT SIDE (large section): 161 cm wide RIGHT SIDE (small section): 84 cm wide HEIGHT under partition: 220 cm Refrigeration unit brand: Carrier Further details: * Unladen weight: 10,820 kg * Tyre brand | First axle: Goodyear * Tyre size | First axle: 385/55 R22.5 * Tyre tread depth inner left | First axle: 30% * Tyre tread depth inner right | First axle: 30% * Maximum axle load | First axle: 9,000 kg * Tyre brand | Second axle: Goodyear * Tyre size | Second axle: 385/55 R22.5 * Tyre tread depth inner left | Second axle: 60% * Tyre tread depth inner right | Second axle: 60% Gusdpfxexnu Ngj Aaceh * Maximum axle load | Second axle: 9,000 kg * Position | First axle: Rear * Manufacturer | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Position | Second axle: Rear * Manufacturer | Second axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension Additional equipment: * Central lubrication system * Homepage * Tail lift * Steering axle * SemCollection Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inform yourself in advance regarding the costs and procedures applicable to your country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors. Specified prices are exclusive of BPM (Dutch road tax) and apply only for export.

Condition: excellent (used), Year of construction: 2016, LAMELLA – CASE CLAMP PRESS GANNOMAT “CONCEPT 70 ECO” Complete in standard configuration including: - Sturdy, torsion-resistant steel frame, constructed with welded and bolted assemblies - UPPER lamella pressure beam with 6 elements, SIDE lamella pressure beam with 5 elements - Lamella pressure beams feature the tried-and-tested tolerance compensation system (Ganner system) for tightly pressed carcass joints - Counter-pressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance lead nuts with grease reservoir - Clamping is electromotor-driven, with two separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is continuously adjustable electronically using two potentiometers and regulated via frequency inverters, providing a completely wear-free press force control - Pressing force for horizontal beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) Pressing force for vertical beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) Guodew Td A Ijpfx Aacoh - Press and adjustment speeds of the pressure beams with fine positioning, switchable via 3-stage selector: 5 / 10 / 25 mm/sec - Extremely user-friendly operation - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - Machine No. 563.624 - 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Overhauled by Ganner, with 6-month parts warranty Location: ex stock 54634 Bitburg - Immediately available -

Condition: new, power: 15 kW (20.39 HP), color: other, Year of construction: 2023, Technical information Chassis type: articulated Drive: Wheel Make of engine: Tractie batterij 48V/ 210 Ah Top speed: 12 km/h Guodpfxjpuw I Dj Aacsh Empty weight: 1.560 kg Functional Lifting capacity: 950 kg Other information Output of the auxiliary hydraulics: 25 l/min Emission level: Stage V / Tier V Transport dimensions (LxWxH): 2,565x1,2x2,05 Rental currency: EUR Production country: IT Additional information Please contact Jan De Lepeleer for more information

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Guedpew Nafkjfx Aacjh Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 1998, Vertical wall saw Elcon 185 RSL Max cutting height 1850mm Max cutting width 4150mm Built in 1998 Saw blade 250mm 380V 6 Amp 2.2kW Engine Saw horizontally and vertically Gjdpfx Aewng Udeaceuh Dimensions: 5050x1200x2540mm, 750kg - Year: 1998 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,265 h, General Data Measurements width 2530 mm Measurements depth 2050 mm Measurements height 2650 mm Machine weight 5500 kg Control Unit Brand Siemens Model Sinumerik 810D Powerline Main Drive Spindle speed range 10000 rpm Number of axis 3 Movement X-Axis Movement 635 mm X-Axis Rapid Traverse 25–30 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 25–30 m/min Z-Axis Movement 460 mm Z-Axis Rapid Traverse 25–30 m/min Table Table load 600 kg Tools Max tool diameter 80 mm Guodpfx Aasxnr Hiecsh Max tool length 300 mm Type of tool holder SK40 This 3-axis DMG DECKEL MAHO DMC 635V eco was manufactured in 2011. It features a Siemens Sinumerik 810D Powerline control system, a tool holder SK 40, and a tool magazine with 20 positions. The machine offers a spindle speed of up to 10,000 rpm and a rapid traverse speed of 25 to 30 m/min in X/Y/Z axes. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V eco vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2010, functionality: fully functional, Offer: 1 x Eco Tower 120 year of manufacture 2010 1 x handling system 1 x storage unit Guedjxlciispfx Aacoh

Condition: excellent (used), Year of construction: 2021, Automatic Panel Saw Putsch Meniconi Type: SVP 980 A ECO Automatic horizontal feed Automatic vertical feed Guodowy H Tdepfx Aaceh Horizontal positioning control Welded frame with extremely high rigidity Pneumatically retractable support grid Stable locking of saw carriage at top and bottom Retractable splitter for cutouts Control panel at eye level Digital readout at longitudinal stop Lift roller transport system Scoring unit Edging support Dust extraction system TRK ECO version with pneumatic extraction channel control Touch screen Dustproofed Technical Data Vertical cutting height: 2,200 mm Horizontal cutting height: 2,100 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade diameter: 300 mm Extraction connection: 160 mm Width: 1,500 mm Height: 3,150 mm Length: 7,300 mm Motor power: 7.5 HP (5.5 kW) Motor voltage: 3 x 400 V Year of manufacture: 2021 Location: in stock at 54634 Bitburg - immediately available -

Condition: good (used), functionality: fully functional, Sami Autochopper 185 TEC 440 Firewood Processor In good condition Operates automatically Electric drive Gujdsxiytyjpfx Aaceh Max diameter: 44 cm Logs: 20–50 cm Splitting force: 18.5 t Splitting wedge: 2/8

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 620, total height: 2,665 mm, total length: 3,250 mm, total width: 2,779 mm, table width: 560 mm, table length: 1,200 mm, table load: 720 kg, overall weight: 4,100 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 9,000 rpm, number of spindles: 1, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: documentation/manual, rotational speed infinitely variable, Used DMC 1035 V eco for sale – High-performance vertical machining center Upgrade your manufacturing processes with this robust and powerful DMC 1035 V eco from DMG MORI! This vertical machining center is ideal for a wide range of milling tasks and offers outstanding performance when machining a wide variety of materials. Key Features: High rigidity and stability: Ensures precise machining results and a long service life. Large work area: Provides sufficient space for machining large workpieces. High spindle speed: Enables fast and efficient machining processes. Robust construction: Guarantees a long service life and reliable performance. CNC control: Equipped with a user-friendly CNC control for easy programming and operation. Guedpjxm Slvjfx Aacsh Additional Information: Year of Manufacture: 2010 Condition: Good, Used Control: Heidenhain TNC 620 Travel Range: 1,035 x 560 x 510 mm Speeds: 20 - 9,000 rpm Ideal for: General Machining Tool and Mold Making Single-Part and Small-Batch Production Mechanical Engineering Why this DMC 1035 V eco? This machine has been regularly serviced and is in good used condition. It offers a cost-effective way to expand your manufacturing capacity and increase your productivity.

Condition: used, Year of construction: 2001, total height: 2,230 mm, total length: 4,850 mm, total width: 1,300 mm, Weight: 750 kg - Max. cutting height vertical [mm]: 1850 - Max. cutting width [mm]: 4150 - Max. cutting depth [mm]: 55 Gsdpewnik Iefx Aaceuh - Max. saw blade diameter [mm]: 250 - Vertical cutting: Yes - Year: 2001 - Documentation available: No - CE marking present: Yes - Serial number: 106152 - Voltage [V]: 380 - Current consumption [A]: 8 - Fuse [A]: 16 - Power [kW]: 3.0 - Transport dimensions: 4850mm x 1300mm x 2230mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2022, functionality: fully functional, The machine is a few years old, but has rarely been used. It can be inspected at our location in Weesp. Gujdpfsxg Hxwex Aacsh

Condition: used, mileage: 157,000 km, power: 118 kW (160.44 HP), first registration: 11/2010, overall weight: 5,300 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Equipment: ABS, air conditioning, Manufacturer Mercedes Model Sprinter 516 CDI Versalift ET-36-LF 13,7 m. Year 2010 Condition Good Serial Number WDB9066531S463602 Ref. nr. 1467883 Gusdpfx Aowuif Soacoh Reg. date: 04.11.2010 Engine: 2.1 Ltr. - 120 kW CDI CAT Hk: 160 Km: 157000 Gearbox: Manual Eurotype: Euro 5 Cabin heater: ? Air conditioning: ? Disc brake: ? ABS: ? Tire Size: 205/75R16 - 205/75R16 Cover% left 10% - 90% Front suspension: Parable Suspension rear: Parable Wheelbase: 3665mm Power take-off: ? Total weight: 5300 kg. Net weight: 4320 kg. Lift Brand: Versalift ET-36-LF ECO Lift capacity: 200 kg. Working height: 13.70 m.

Condition: as good as new (ex-display), Year of construction: 2024, Technical data: Slat carcass press from our showroom; Working range: width from 150 - 2.550mm, height from 150 - 1.400mm; depth from 150 - 700mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 dN(kg) of the lateral pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 dN(kg) of the upper pressing bar Simple operation via 6 separate push buttons, Freely adjustable pressing time preselection with automatic opening, Charging height 300 mm Machine is in our showroom and can be delivered immediately. Guodpeb Eln Dsfx Aacoh Location: ex stock 54634 Bitburg

Condition: excellent (used), Year of construction: 2013, LAMELLAR - CASE CLAMP GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Case joints. - Counter-pressure surfaces (side pressure wall, base) are 40 mm thick, coated, continuous support plates - Electrically operated adjustment of both press beams via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance running nuts with grease reservoir. - Clamping is performed electrically using two separate worm gear motors (2 x 0.75 kW) - Pressing force: 2000 daN (kg) per press beam. - The pressing force of the press beam is electronically regulated and set via frequency converter, thus torque transmission is completely wear-free. - Pressing and adjustment speed: 25 mm/sec. - Very simple operation via 6 separate push buttons; 6 movement operations can be selected via the controller. - Freely adjustable pressing time preselection with automatic opening: 0-30 min (switchable to seconds or hours). - Working height/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm; Height min: 150 mm, max: 1400 mm. Depth: 700 mm 1 selector switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) Machine No. 380.324 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Gjdpfxew Tdyms Aacsuh Machine used: Year of construction: 2013, fully overhauled by Ganner, 6-month parts warranty Special price: ex-stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Gsdpfx Aaoiidm Njceuh Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -