Used Galion 118 for sale (368)

Condition: excellent (used), I sell the pump FEZER 016-118 94213 - Pump in bdb condition. Gedpfxoud Ryro Amujub - Capacity 16m3/H

Condition: refurbished (used), Year of construction: 2014, operating hours: 2,187 h, load capacity: 1,800 kg, lifting height: 122 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,350 mm, fork length: 1,150 mm, empty load weight: 334 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically overhauled according to FEM-4.004 and the latest safety standards—for maximum quality and your safety. From the frame to the battery, including drive, brakes, steering, and electrics—every vehicle is thoroughly inspected and refurbished. ✔ Made in Germany—with responsibility and precision ✔ Strict technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support—even after purchase Test on site and get individual advice—we’ll find the right solution for you. Industrial truck data: Manufacturer: Jungheinrich Guodpoy Rpbxofx Amusb Model: Low lift pallet truck EJE 118 Drive type: Electric Load capacity: 1,800 kg Year of manufacture: 2014 Operating hours: 2,187 Lift height: 122 mm Mast type: None Initial lift: Yes Length: 1,800 mm Width: 800 mm Height: 1,350 mm Fork length: 1,150 mm Unladen weight: 334 kg Load center: 600 mm Tyres: Polyurethane Model type: EJE 118 Battery type: PzS Battery weight: 222 kg

Condition: refurbished (used), Year of construction: 2014, operating hours: 2,187 h, load capacity: 1,800 kg, lifting height: 122 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,350 mm, fork length: 1,150 mm, empty load weight: 334 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically overhauled according to FEM-4.004 and the latest safety standards—for maximum quality and your safety. From the frame to the battery, including drive, brakes, steering, and electrics—every vehicle is thoroughly inspected and refurbished. Guodpfoy Rpbrsx Amueb ✔ Made in Germany—with responsibility and precision ✔ Strict technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support—even after purchase Test on site and get individual advice—we’ll find the right solution for you. Industrial truck data: Manufacturer: Jungheinrich Model: Low lift pallet truck EJE 118 Drive type: Electric Load capacity: 1,800 kg Year of manufacture: 2014 Operating hours: 2,187 Lift height: 122 mm Mast type: None Initial lift: Yes Length: 1,800 mm Width: 800 mm Height: 1,350 mm Fork length: 1,150 mm Unladen weight: 334 kg Load center: 600 mm Tyres: Polyurethane Model type: EJE 118 Battery type: PzS Battery weight: 222 kg

Year of construction: 2008, condition: like new (used), functionality: fully functional, Elumatec SLK 118 3-axis CNC profile machining center. Bar processing center with 3 controlled axes; designed for machining aluminum and thin-walled steel profiles and extrusions, as well as aluminum, PVC, and lightly alloyed steel. Especially suitable for companies processing Neher insect screen profiles or those looking to automate their door production. Machining from above; workpiece rotation for processing the opposite side. Guedpsyr Ai Defx Amusb Technical Data: Travel range X-axis: 2450 mm / max. speed 36 m/min Travel range Y-axis: 350 mm / max. speed 15 m/min Travel range Z-axis: 280 mm / max. speed 15 m/min Spindle speed: 18,000 rpm. 6.5 HP (4.5 kW) motor-driven spindle Minimum quantity cooling system Dimensions: 3100 x 1850 x 2250 mm (122" x 73" x 89"). Weight: 1,400 kg (3,087 lbs). Equipment: PC touchscreen control with Windows software, 4 material clamps The machine is in exceptionally good condition.

Condition: ready for operation (used), Year of construction: 2007, Nilfisk CFM 118 industrial vacuum cleaner Vacuum cleaner Vacuum cleaner Year of construction: 2007 1 kW Weight: approx. 28 kg Air flow rate: approx. 45 l/sec Tank capacity: 25l You are welcome to come by for a viewing. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Gedpoqy Ezgjfx Amusub Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201011556, empty load weight: 3,300 kg, maximum load weight: 8,200 kg, overall weight: 11,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, suspension: steel, tire size: 235/75 r17,5, color: red, The images are archive images; the vehicle may still be in use! Further information Steel welded construction, continuous tilt shaft at the rear with 80 mm ball bearings Front transmission support leg, folding rear support, 2 wheel chocks with brackets, steel underride guard, full-width rear mud flaps, quarter-shell fenders, spare wheel, same make as base tire, steel rim, loose, 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note! The side panel touches the storage compartment when folded down. ``` Lockable storage space for loading ramps beneath the loading area, 1 pair of aluminum ramps, 3,000 mm long, 360 mm wide, load capacity per pair: 8,000 kg (rear ramp attachment bar). Towbar with tested 40 mm towing eye, towbar height adjustable via spindle, max. adjustment range: 300 mm. BPW drum brake axles, laser-measured axle/chassis to reduce tire wear and fuel consumption. Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation). Dual-line pneumatic brake system. Color-coded cable routing for easy servicing. Manual spindle parking brake, integral air reservoir, ABS and ALB, with ABS connector at the front, with connecting cable. Caution: The trailer may only be towed by towing vehicles that ensure the ABS is effective. 2 interchangeable coupling heads at the front, with connecting cables to the towing vehicle. Gujdpfjlhpzvex Amuob 24-volt multi-chamber lights, yellow LED side lighting, 2 white position lights at the front. 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable connectors at the front, with connecting cable. Three-way tipping system, hydraulic multi-piston press with stroke limiter and safety cable. Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this can be retrofitted to the truck. Hydraulic connection with SVK connector NW 10/3, including connecting hose. Hydraulic operation via the truck's PTO. Sturdy tipping body with 4 mm sheet steel floor, steel side wall construction, continuous side walls, foldable and pivoting with central locking at the bottom. Rear corner stanchions are pluggable. The rear wall is foldable and pivots, with central locking at the bottom. Bedside length approx. 5,000 mm, side walls with 6 hinges at the bottom, bed width 2,420 mm 5 pairs of lashing eyes in the floor, each 5 tons Country of registration: Germany, with DEKRA approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for a single-line license plate holder, contour markings with reflective stripes according to ECE R 048, white on the sides and red on the rear

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201012268, empty load weight: 3,240 kg, maximum load weight: 8,560 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 5,000 mm, loading space width: 2,420 mm, tire size: 235/75 r17,5, color: green, operation weight: 3,240 kg, Further information Welded steel construction, continuous tilting shaft at the rear with 80 mm ball tilting bearing, gear support foot at the front, folding rear support, wheel chocks with holder, steel underride guard, rear spray flaps across the entire width (not in conjunction with forklift bracket), quarter-shell mudguards, spare wheel, same make as basic tires, steel rim, loose, plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery)Note! Dropside touches storage box when folded down, lockable storage space for access ramps underneath the loading area, pair of aluminum ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg, (suspension bar for ramps at the rear) Drawbar with tested 40 mm towing eye, height-adjustable drawbar via spindle, max. adjustment range 300 mm BPW drum brake axles, laser-measured axle/chassis Reduction in tire wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle load compensation (rocker compensation) 2-line compressed air brake systemColor-coded cable routing for easy servicing, hand spindle parking brake Integral air reservoir, ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS, Duomatic connection at the front, with connecting cable to the motor vehicle 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin plug at the front, with connecting cable Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck, hydraulic connection with SVK plug NW 10/3, incl. connecting hose, hydraulic actuation via truck power take-off Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and pivoting with central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Dropside retraction springs (not possible with split side walls), platform width 2420 mm, pair of lashing eyes in the floor, 5 tons each. Operating instructions: The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and castering behavior possible due to incorrect load distribution) Gjdpfxek E Tdaj Amueub Country of registration: Germany, with Dekra approval and expert opinion (according to §13 EG - FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3 kg, maximum load weight: 8 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, The images shown are archive photos. Further Information Chassis Center Axle Trailer Fine-grain steel welded construction Outer frame slightly slanted with Load-Lock profile for lashing strap attachment. Note: To attach the straps in combination with side walls, the side walls must be opened! Gear support leg at the front Folding rear support 2 wheel chocks with holders Steel underrun protection, galvanized Gedpji Ri H Dsfx Amuoub Quarter shell mudguards 1 plastic toolbox with shelf, dimensions: w=620/h=360/d=440 mm, lockable with a padlock (padlock not included) 1 open storage compartment for insert stakes, located under the loading area 4 pairs of stake pockets integrated into the outer frame, 83 x 83 mm internal dimensions 4 stake pockets centered in the floor with reinforcements to the main frame, 83 x 83 mm internal dimensions 6 pairs of insertable stakes, B=80/ D=80/ L=2000 mm, hot-dip galvanized Note: Stake pockets/insert stakes are not designed for securing long loads, pipes, etc. by themselves without additional lashing Tandem trailer coupling Drawbar with certified 40 mm towing eye Drawbar mechanically adjustable in length 4 x 500 mm, from 1800 to 3800 mm, set to 1800 mm (Note: Observe load distribution and drawbar load) Axles & Suspension GFA axles with tapered roller bearings and S-cam brakes Laser-measured axles/running gear to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker balance) Wheels and Tires 235/75 R 17.5 Manufacturer’s choice Steel rims, factory silver Brake System 2-line air brake system Spring-loaded parking brake Integral air tanks 2 non-interchangeable trailer couplings at the front with connecting lines to the truck ABS and ALB, with ABS plug at the front with connecting cable Caution: This trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red outline marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable Floor About 30 mm thick phenolic plywood, designed for high point loads Note: Warping of the floor possible due to weather conditions! Platform length approx. 6,200 mm Operating Notes The specified gross weight is technically feasible; depending on the type of cargo, the gross weight may not be achievable in compliance with permissible axle, support, and saddle loads. Approval / Plates Country of registration: Germany With Dekra inspection and report 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Paintwork Frame color: DB 7350 Nova Grey Attention: Archive photos!

Condition: excellent (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 800 x 8 mm Gsdjvy Umtjpfx Amuoub -Inside: Ø: 80 mm -Hole circle: Ø 120 x 22 mm / Ø 160 x 26 mm -Number of teeth: 118 teeth -Weight: 20 kg

Condition: good (used), Geared motor, electric motor, electric geared motor, bevel geared motor Gedpfx Asik Adcsmueub -Manufacturer: SEW-Eurodrive, geared motor with brake -Type: RF07 DR63M4/BR -Speed: 118 rpm -Power: 0.18 kW -Hollow shaft: Ø 35 x 180 mm -Protection rating: IP54 -Brake: 3.2 Nm -Dimensions: 395/118/H165 mm -Weight: 8.4 kg

Year of construction: 2007, condition: used, fuel type: electric, Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from picking truck type ECE 118 -Hydraulic pump: type 50125677 -Motor: Type AU3480 AMJ5729 24 V 1.5 kW -with: tank and control valve -Number: 4x unit available -Price per piece Gedpfxeiz Dtvo Amujub -Dimensions: 200/180/H370 mm -Weight: 10 kg/pc.

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Gujdpfevxp Ddex Amueb -Manufacturer: KED Kurt Ehemann, grinding drum drum width 250 mm -Drum: Ø 118 mm -Hole: Ø 30 mm -Number: 2x drum available -Price: per piece -Dimensions: Ø 118 x 310 mm -Weight: 9.7 kg/piece

Condition: used, adjustable gear motor, variable speed gear motor, electric motor Gusdpechbv Hjfx Amueb -Manufacturer variable speed gear Lenze type: 155-ZNA0-80-4 -Manufacturer Motor Dietz type: D48L -Motor power: 0.75 kW -Speed range: 21-118 rpm -Motor: adjustable -height of the shaft axis: 120 mm -Number: 1 motors available -Price: per piece -Drive shaft: Ø 25 mm -Dimensions: 390/400/H250 mm -Weight: 31 kg

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Gedpfxevxp Hxo Amusub -Manufacturer: KED Kurt Ehemann, grinding drum drum width 330 mm -Drum: Ø 118 mm -Hole: Ø 30 mm -Number: 2x drum available -Price: per piece -Dimensions: Ø 118 x 385 mm -Weight: 11.3 kg/piece

Condition: good (used), Year of construction: 2007, Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Jungheinrich, drawbar complete with drive from electric pallet truck ECE 118 -Drive motor: 24 VDC / 1.6 kW -Individual components: see photos -Number: 4x drawbars available Gusdpfx Asiz Dr Ajmuob -Sale/Price: per piece -Dimensions: 1530/480/H290 mm -Weight: 87 kg/unit

Condition: used, Gear motor, electric motor -Speed: 118 rpm -Power: 0.15 kW Gsdpsc R R Anefx Amujub -Construction: B3 angle -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 400/200/H200 mm -Weight: 12.5 kg

Condition: used, Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, sorting belt, sorting conveyor belt, readout conveyor belt -Side walls made of: stainless steel -Speed: 118 m/min Guedpfxeffukro Amueb -Drive: 0.75 kW -Belt width: 590 mm -Length: 2000 mm -Transport dimensions: 4360/1170/H1170 mm -Weight: 684 kg

Condition: used, mileage: 113,000 km, power: 110 kW (149.56 HP), first registration: 08/2020, fuel type: diesel, color: black, gearing type: mechanical, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, second-hand vehicle warranty, soot filter, Special equipment: Business package, through-loading system (rear center armrest), metallic paint finish, smoker package Other equipment: Gedpoykc T Hsfx Amujub Storage package, Advantage, deactivatable front passenger airbag, driver and front passenger airbags, trailer stability program (ASL), equipment package: Connected, equipment package: ConnectedDrive Services, electrically adjustable and heated exterior mirrors, BMW Live Cockpit, onboard computer, DAB tuner (digital radio reception), wheel theft protection (wheel locks), Dynamic Stability Control (DSC) with extended features, Dynamic Traction Control (DTC), electronic locking differential, driver assistance system: Active Guard Plus (lane departure warning, front collision warning), driver assistance system: attention assistant, driver assistance system: Driving Experience switch, driver assistance system: Performance Control, power windows front and rear, Bluetooth hands-free kit with USB/audio interface, velour floor mats, urea tank (SCR): 20.5 liters, interior trim: quartz silver matte textured, ISOFIX child seat mounts on rear seat, body: 5-door, rear head airbag system, front head airbag system, mechanically adjustable steering column (steering wheel), headlight range control, alloy wheels, engine 2.0 liter - 110 kW 16V turbodiesel, Park Distance Control (PDC) front and rear, electric parking brake, personalization system (Personal Profile), tire pressure monitoring system, low emissions according to Euro 6d, heated windshield washer nozzles, front side airbag, service system: ConnectedDrive Services, service system: Intelligent Emergency Call incl. TeleServices, seat upholstery: fabric Grid, start/stop button, start/stop system (function), warning triangle, heat-insulating tinted glass.

Condition: good (used), Position computer, position scanner Godpfob S Hr Djx Amujub -Voltage: 220 V 50 Hz -Dimensions: 310/340/H210 mm -Weight: 12 kg

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, center height: 130 mm, grinding length: 575 mm, grinding diameter: 125 mm, pivoting range: -90 °, spindle bore: 38 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Largest grinding diameter with set blocks: 125 mm Largest grinding diameter without set blocks: 250 mm Maximum grinding length: 575 mm Centre height: 130 mm Spindle speed (grinding spindle): 1,150/1,460 rpm (2 levels) Workpiece spindle Spindle bore: 38 mm Head swivel: -90° Workpiece weight: 75 kg Table Table swivel: ±12° (total 24°) Longitudinal table movement: 4 - 710 mm Grinding wheels Maximum grinding wheel diameter: 500 mm Maximum grinding wheel width: 60 mm Grinding wheel bore: 127 mm Holder diameter: 127 mm Flange diameter: 190 mm Cone diameter: 60 mm MACHINE DETAILS Area required: 3.28 x 3.0 x 1.5 m Godpfx Amjvt S Diousub Weight: 2,700 kg Main drive: AEG AM 134 MV4 W1 Workpiece spindle drive: AEG AM 90 S6 W1 Coolant pump: AEG TP 44/270 Voltage: 220/380 V Frequency: 50 Hz EQUIPMENT - Grinding headstock with fixed disk - Workpiece headstock for internal and external grinding - Coolant pump and lubricating oil pump - V-belt drive - Extensive documentation

Condition: excellent (used), Year of construction: 2016, Debus DDS 118 / 5/ 23 chip industrial vacuum cleaner 6 bar 4,6 m³/min 278 Manufacturer: Debus Model: DDS 118 full name: DDS 118 / 5/ 23 chips Year of manufacture: 2016 Make No.: 278 operating pressure: 6 bar suction capacity: 4,6 m³/min Air requirement: 1,3 m³/min weight: approx. 30 kg Capacity: approx. 40 liters Dimensions: 55 cm long, 60 cm wide and 150 cm high Condition: used Scope of delivery: see pictures Complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines More items - new and used - you will find in our store! International shipping costs on request! Guedpeivd A Uefx Amujb

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,177 h, machine/vehicle number: 10067745, empty load weight: 205 kg, construction height: 1,400 mm, fuel type: electric, drive type: Elektro, working height: 2,997 mm, Vertical lift Godpfx Ajuhwm Hjmuoub Chassis number: 10067745 Condition: Ready for use and fully functional Technical condition: good Battery Volt: 24V Battery Ah: 219Ah Description: Crown WAV 60-118 No.: C Year of construction: 2018 Operating hours: 2,177 The device is visually and technically in good condition. Charger on request Fast and uncomplicated transport possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All used goods are sold without warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site.

Condition: used, empty load weight: 3,500 kg, maximum load weight: 8,300 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 10/2009, loading space length: 6,200 mm, loading space width: 2,440 mm, loading space height: 3,000 mm, suspension: air, tire size: 235/75R17,5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, tarpaulin and bows, 2-axle, tandem, air-suspended, lifting+lowering, ABS (anti-lock braking system), Edscha, lashing eyes, U-protection, front support, rear support, height-adjustable drawbar Body: Flatbed + tarpaulin Trailer for glass transport with Edscha canopy Tires approx. 50% ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Guodpfx Aji Rpx Nsmueb - .

Condition: new, Tanos Systainer Gusdpfow Upnlsx Amujb - 118 pieces - printed with Festo lettering - approx. dimensions - External dimensions H 112 x W 396 x D 296 mm - Internal dimensions H 71 x W 389.5 x D 275 mm - Shipping available at extra cost

Condition: repair required (used), Year of construction: 2008, machine/vehicle number: 118009950, functionality: not functional, feed length X-axis: 2,450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 280 mm, spindle speed (max.): 18,000 rpm, No reserve price – guaranteed sale to the highest bidder! Condition: The machine has always been maintained but now has a software error. TECHNICAL DETAILS X-axis travel: 2,450 mm Y-axis travel: 350 mm Z-axis travel: 280 mm Feed rate: 30 / 15 / 15 m/min Spindle Spindle speed: 18,000 rpm Spindle power: 3 kW Working area Max. machining length: 2,400 mm Compressed air Compressed air connection: 7 bar MACHINE DETAILS Length: 3,100 mm Gsdpfx Aowu Ekqsmuoub Depth: 1,650 mm Height: 2,250 mm Weight: 1,227 kg Voltage: 400 V, 3~, 50 Hz Connected load: 8 kW