Used Giben Smart 65 for sale (9)

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Iodpfx Asvvkqgoaletd Storage location: Nattheim

Condition: used, Hard drive: Empty Technical data: on request Itodpfxot N Ag Ne Aaled Condition: Functional

Condition: used, Complete factory for the production of furniture cabinets, composed by: Itsdpscr U Urefx Aalsd SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: ready for operation (used), Year of construction: 2002, Giben rip saw Itsdpfxjx Huhio Aaled Year of manufacture: 2002 New computer installed in 2024 Rits Gripper 7 pcs Transport dimensions: 4 packages 7.5 cubic meters approx. 5000 kg total Technical data Total saw length 665 cm Saw length 3700 mm Pusher 3300 mm Saw height 90 mm

Condition: good (used), Code: 0188 Brand: GIBEN Model: ONIX SP 90 CHALLENGE LINE - CE Standard Automatic horizontal panel saw with clamps for cutting wood panels, multilayer panels, furniture, composite materials, sandwich panels and various materials - CE Standard Cutting dimensions mm 4400 x 4300 Blade projection mm 90 Blade carriage: feed speed 5/100 mt/min - return speed 100 mt/min Main blade diameter mm 350 - Motor Hp 12,5 Scoring blade diameter 180 mm - Motor Hp 2 Pusher: feed speed 1/25 mt/min - return speed 60 mt/min Frontal loading of panel stack and pusher with clamps N° 3 front air cushion tables Automatic pusher with side upper guides equipped with 7 pneumatic clamps. The steel clamps keep the stack blocked throughout the panel sizing cycle up to the last trim cut. Automatic lateral aligner Automatic adjustment of the blade projection in relation to the height of the pack to be sawn. Electronic control of the speed and position of the saw carriage Easy access to the saw carriage Itedpfx Ajw Ec Riealsd Pneumatic unit for rapid tool removal G-VISION control: Giben machine control software installed on a PC. Multi-tasking Microsoft Windows XP/2000/NT operating system for easy networking Advantages: Sequential control of cutting patterns, number of panels, and pattern sequence change. Parametric control of the feed speed of the saw carriage according to the stack height and trim width. Direct control of machine functions. Setting of cutting patterns. Suction: diameter suction inlets 200 mm Compressed air 6-7 bar Overall dimensions of assembled machine: mm 6400 x 7500 x 1800 h Overall dimensions for transport: machine mm 6500 x 1500 x 1800 h - pusher mm 5200 x 1200 x 1200 h Total weight kg 3200

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 70 mm, cutting width (max.): 1,200 mm, saw blade diameter: 125 mm, rotational speed (max.): 3,800 rpm, total length: 6,000 mm, total height: 1,300 mm, overall weight: 3,500 kg, year of last overhaul: 2024, cutting length (max.): 4,200 mm, collet bore: 75 mm, cutting height with scoring (max.): 2 mm, extraction nozzle diameter: 250 mm, feed length X-axis: 4,500 mm, feed rate X-axis: 7 m/min, main saw diameter: 350 mm, saw blade speed: 3,800 rpm, saw drive: 7,500 W, space requirement length: 6,500 mm, space requirement width: 3,000 mm, Saw for rip cutting but also for sawing. It is very well suited for longitudinal edging of lumber flanks and then cutting to width before planing. With this machine, sawing lumber is incomparably lighter than on classic saws even with a carriage. It can work in automatic and semi-automatic cycle . It has 4 ranges of aggregate position as far as the length of the element is concerned, which means that the aggregate does not have to return all the way to the end of the machine, which shortens the time of cutting the raw material. It significantly facilitates and accelerates the manipulation of with the preparation of lumber for planing, and the even cut makes the alignment saves time on planing the element. Working on it is relatively safe because during the cutting itself, the operator does not have direct contact with the material being cut, and the workpiece is pressed from above with a pressure beam using compressed air. Activation of the pressure beam and the feed of the cutting unit, is carried out using a foot pedal .It is also suitable for cutting boards with a jigsaw .Also equipped with components for various applications. It is ideal for small and medium-sized carpentry shops that process thick massive lumber. The machine is massive and durable. Itsdpfxeuyvnio Aaled

Condition: excellent (used), Year of construction: 2011, Panel saw with cutting length 4500mm Pusher depth 5580mm Lift table width 2200mm Number 7 clamps Feed speed 170m/min Blade 450mm Itjdewq Iqxjpfx Aaljd Blade projection 125mm

Condition: like new (used), Spindle diameter: 40 mm Lenz roller feed for curved elements Smooth speed adjustment Itedpfxsv Uz S So Aaled Feed motor power: 0.25 kW Feed rotation: left/right Safety switch Manual spindle height adjustment Table width: 104 cm Table length: 98 cm Machine construction: cast iron

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 021.06.440, functionality: fully functional, controller model: G-DRIVEAXS BASIC, cutting length (max.): 4,400 mm, main saw diameter: 380 mm, working height: 1,050 mm, Equipment: scorer, TECHNICAL DETAILS Cutting length: 4,400 mm Cross-cutting machine width: 1,525 mm Saw blade protrusion: 105 mm Main blade diameter: 380 mm Scoring blade diameter: 180 mm Lift table dimensions: 4,400 mm × 1,600 mm Working height: 1,050 mm Minimum book height: 10 mm Minimum thickness when loading: 10 mm Minimum panel size when loading: 2,440 mm × 1,220 mm Maximum panel size when loading: 4,200 mm × 1,600 mm Maximum gripper opening: 110 mm Number of grippers for longitudinal stop: 5 Number of grippers for cross stop: 8 Feed speed of saw carriage: 5 to 100 m/min Feed speed of pushers: 1 to 40 m/min Return speed of pushers: 60 m/min MACHINE DETAILS Control system: G-DRIVEAXS BASIC Main motor output: 18 Hp 13.2 kW Itodpfjxf Eg Dsx Aalsd Number of front aligners (longitudinal area): 3 Number of side aligners (crosswise, lower): 2 Number of side aligners on pressure beam: 2 EQUIPMENT Left-hand configuration Side conveyor belt for loading