Used Galion 150 for sale (9,946)

Condition: excellent (used), - Dough capacity: 150 kg - Flour capacity: 95 kg Dsdewxvkcjpfx Aa Hjcl - Dimensions: 920x1340x2140 mm - Stainless steel bowl - 2 electromechanical timers - Power: 3.1 kW - Voltage: 400 V / 50 Hz - Serial number: 124075 - Year of manufacture: 02/2001

Condition: excellent (used), -Dough capacity: 250 kg -Flour capacity: 150 kg -Bowl capacity: 320 L -Model: scsx banco 250 -Discharge table and divider -Discharge on the left -2 speeds -2 timers -Voltage: 380V -Power: 9 kW Dedswxvlgopfx Aa Hscl

Condition: good (used), Year of construction: 2014, functionality: fully functional, For sale is a used Siat L36-150 TC-CE adhesive tape printing machine, manufactured in 2014. Djdpfsza Synjx Aa Hjcl The machine is in good condition and fully functional. This machine was operated in our facility together with a dust extraction system, which is also to be sold: Manufacturer / Model: Siat L36 150 TC CE Year of manufacture: 2014 Condition: used, good Function: functional Application: printing adhesive tape CE marking: present Dust extraction system: FILTERBLOC CARBO-2000 ATEX (new, from 2023) We prefer to sell the machine as a complete package including the dust extraction system. The machine can be inspected by arrangement. Further technical data and photos are available upon request.

Condition: reconditioned (used), Year of construction: 2016, Technical specifications: Product number V-VC 150 Year of manufacture 2016 Engine power 3 kW Capacity 150 m3/h Maximum vacuum 1.1 mbar Noise level 74 dB Dsdpfozvrniox Aa Hocl Rotational speed 1500 rpm Weight 90 kg Dimensions [h x l x w] 7011 x 281 x 310 mm The pump achieves a vacuum of 1.1 mbar, as confirmed by the measurement on the sensor in the video attached below. After oil service New oil New exhaust separators Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are divided according to their operating principle into: volumetric, flow, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with a given pump), pumping speed and its dependence on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: used, Year of construction: 2004, functionality: fully functional, CNC gear hobbing machine Dodpfxszkwvns Aa Hjcl Control: Siemens 840 D Power Line Technical data: Max. workpiece diameter: 150 mm Table diameter: 145 mm Max. table speed: 800 rpm Distance between centers: 10 – 200 mm Max. axial travel: 250 mm Swivel angle of milling head: +/- 45° Max. tailstock travel: 300 mm Max. rapid traverse rate: 17,000 mm/min Drive power of milling head: 19 kW Max. module: 3 mm Max. speed of milling spindle / tool speed: 4,500 rpm Max. diameter of hobbing cutter: 80 mm Max. length of hobbing cutter: 200 mm Dimensions approx.: 5.5 x 3.7 x 3.1 m Weight approx.: 9,500 kg Equipment: Chip conveyor Oil mist extraction / oil extraction Oil cooler Steady rest with lowering device and vertical adjustment Rotary ring loader with two workpiece grippers Loading belt system for automatic feeding 5 milling arbors / hobbing cutter holders: 1 x Ø 22 mm 2 x Ø 27 mm 1 x Ø 32 mm 1 x Ø 40 mm Other: Video recordings via WhatsApp

Condition: used, Year of construction: 2013, Operational unit. Djdpfx Aozkg Nwea Hscl Ask for additional information!

Condition: used, Year of construction: 2012, functionality: fully functional, operating hours: 9,750 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 150 t, stroke length: 215 mm, ram plate length: 4,100 mm, overall weight: 11,600 kg, We offer a high-quality Bystronic XPERT 150/4100 CNC hydraulic press brake, built in 2012, designed for the precise bending of medium to large sheet metal parts. The machine is supplied including tooling, making it immediately ready for operation. ✅ Excellent technical condition ✅ High bending precision Dsdpjzfpnfjfx Aa Hjcl ✅ Includes tooling Availability: Q3 2026 Inspection: The machine can be inspected under power by appointment.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 400 V, empty load weight: 50 kg, input frequency: 50 Hz, Tool tempering heating: 9 kW. Temperature: 150°C. Djdpfx Aaozab A Eo Hecl

Condition: excellent (used), 4 kW motor, feed unit, cutting height 9 cm, passage height 125 cm, table length 157 cm. Dedpfxsy S U D Uo Aa Hjcl

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Dsdpfxjy Hki Ae Aa Hscl Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Condition: excellent (used), Year of construction: 2014, operating hours: 271 h, functionality: fully functional, machine/vehicle number: 639074, overall weight: 1,111 kg, load capacity: 150 kg, arm reach: 2,696 mm, This is a KUKA KR 150 R2700 extra F industrial robot with KRC4 control system, manufactured in 2014. We would also be happy to offer this robot as a fully refurbished unit! The control system includes the following options: BoardPackage EthernetKRL LoadDataDetermination Profinet KRC-Nexxt Dcsdpezl Aqtofx Aa Hel RemoteService SafeOperation UserTech

Condition: good (used), Year of construction: 1990, Kemper SPA 150 spiral mixer - used - year of manufacture approx. 1990 - capacity 240 kg of dough - 3 removable bowls - machine from production - cleaned and inspected Dodpfxezp D Rvo Aa Hocl - collection from warehouse / shipping option available - price upon request

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 001, Equipment: CE marking, DEKCEL 150 W Industrial CO₂ Laser – Usable Area: 2,650 x 1,450 mm – Complete equipment ready for production Price: €7,500 + VAT For sale: a DEKCEL 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before disassembly. The machine is being sold exclusively due to a technological upgrade following the introduction of new, state-of-the-art RF laser equipment. Equipped with a Ruida DSP industrial controller, RDWorks software, and a fully configured computer, it is ready to start working from day one. It features a large usable working area of 2,650 x 1,450 mm, ideal for machining entire sheets of MDF, HDF, plywood, acrylic, cardboard, leather, foam, rubber, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube and also comes with a second, brand-new 150 W RECI laser tube, providing the buyer with significant savings on future maintenance costs. The price includes: • DEKCEL 150 W industrial laser machine. • Usable working area: 2,650 x 1,450 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • CW-5200 industrial chiller. Djdpfjzmqaxex Aa Hocl • Installed and operational RECI 150 W laser tube. • New spare RECI 150 W laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. The machine can be seen in operation before disassembly, allowing you to verify its performance, precision, and cutting quality. An excellent opportunity to acquire a large-format industrial machine that is fully operational and comes with a significant set of accessories and spare parts, ready to continue production from day one. _____ This is not just a used machine; it is delivered as a complete industrial system with strategic spare parts included, which minimizes maintenance costs and ensures quick start-up.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, ABB Robotics IRB 6400R 2.5-150 M99 robot, complete, with Profibus Controller: S4C M99 Number of axes: 6 Max. payload: 150 kg Max. working range: approx. 2500 mm Year of manufacture: 2002 Dcjdpozmtiisfx Aa Hel Serial number: 64-17912 Scope of delivery: Robot, controller, cables, teach pendant, operating manual, wiring diagrams Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city and postal code. Freight costs upon request – please specify delivery address.

Condition: good (used), Vise, bench vise, locksmith's vise, parallel vise, heavy-duty vise -Manufacturer: ZS, solid vise -Clamping jaws: 150 x 25 mm -Wingspan: 215 mm Dcsdpfxoycftte Aa Hjl -Dimensions: 440/170/H245 mm -Weight: 31.8 kg

Condition: excellent (used), Year of construction: 2009, drilling depth: 350 mm, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, Deep hole drilling machine Mollart - LD8 - 150 Pellet Die Number of Spindles 8 Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Pellet Die Diameter 500mm-1550mm B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Gun Drill Speed Range 0-14,000 RPM Max. drill Ø steel 1.5 - 10 mm Djdsyilgdspfx Aa Hecl Drilling depth 350 mm Table load 1600 Speeds / ranges 14000 Rpm Dimensions (Estimate) Length 4500 mm Width 4500 mm Height 2300 mm Weight 12000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2024, neu 2024 5546 prompt, Zwischenverkauf v Polen 1730 € 1 150 mm 2.000 x 150 mm 200 x 150 x 42 ø mm 605 mm 3000 1/min Dcedpfx Aajynmw Ds Hjl 3.5 kW 1025 mm 600 mm 1000 mm 100 kg Industrial belt grinder with following features: - Separate emergency stop - Motor brake - Standard - Reliable - Simple and practical operation - Easy to adjust - Quick belt change without tools - 5-year guarantee on the motor - Optimal safety

Condition: good (used), travel distance X-axis: 12,000 mm, travel distance Y-axis: 7,300 mm, travel distance Z-axis: 3,000 mm, total length: 30,000 mm, table length: 12,000 mm, table width: 4,730 mm, total width: 12,000 mm, total height: 10,475 mm, table load: 250,000 kg, overall weight: 400,000 kg, Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp Dcedpoytrxksfx Aa Hel - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 400.000 Kg Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1990, spindle diameter 150 mm x-travel 4000 mm y-travel 3000 mm z-travel 1000 mm w-travel 1500 mm Table area 2000x2000 mm Table load 30 t Feed 3-3500 mm/min Rapid movement 5000 mm/min transmission ratio 2 spindle power 37 kW voltage 380 V frequency 50 Hz Control Heidenhain type ITNC mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale Djdpfx Aaeyqtf Ts Hocl apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2006, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, grinding height: 150 mm, input frequency: 50 Hz, - Year of manufacture: 2006 - In stock - After technical inspection - CE certified TECHNICAL SPECIFICATIONS: - Working height: 150 mm - Sanding belt dimensions: 150 x 2150 mm - Two sanding belt speeds - Table dimensions: 22 x 144 cm - Both tables adjustable at an angle within the range of 0-30 degrees - Motor power: 3.5 kW / 4.5 HP - Pneumatic belt tensioning and oscillation - Adjustable platen for sanding veneer on one side and a "back" of 15x75 cm on the other Dcedpszinpcsfx Aa Hsl - Attachment, protractor for angle sanding - Additional table for profile sanding - Dust extraction port: diameter 140 mm - Overall dimensions: 144 x 71 x 130 cm (length x width x height) - Weight: approx. 450 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 71400, For sale is a RÖSLER Rotomatic R 150/15 SE, including a separation station, conveying technology, control cabinet, and control system. This unit comes from our ongoing production facility and was dismantled solely due to a plant upgrade. The unit is fully functional, ready for immediate use, and can be inspected and demonstrated in operational condition by appointment. Technical data Manufacturer: RÖSLER Oberflächentechnik GmbH Model: Rotomatic R 150/15 SE Machine type: Continuous belt grinding machine Year of manufacture: 2016 Serial number: 71400 Working channel length: 15 m Total power: 17 kW Main drive: 12.5 kW Equipment Complete system including: Rotomatic R 150/15 SE Separation station Workpiece conveyor belt Grinding media return system Control cabinet with PLC control Pneumatic and process water technology Automatic continuous operation Integrated workpiece/grinding media separation Dcjdpszizu Esfx Aa Hol Variable processing time Designed for continuous industrial operation Application areas Ideally suited for: Deburring Rounding Smoothing Cleaning Surface finishing Belt grinding of mass-produced parts Suitable for workpieces made of: Steel Stainless steel Aluminum Brass Zinc die casting Sintered and stamped parts The Rotomatic is particularly suitable for the continuous processing of large quantities and can be easily integrated into automated production lines. The Rotomatic principle ensures that sensitive workpieces are processed particularly gently and according to the first-in-first-out principle.

Condition: used, 1 cylindrical, vertical stainless steel tank, used Capacity: 150 cbm Order number: 4326 Material: V2A Internal weld seams ground smooth for food contact Dimensions: 3,400 mm internal diameter 3,600 mm external diameter 16,500 mm cylindrical height Dcodpjy Atvqefx Aa Hol 800 mm upper bottom Approx. 17,300 mm overall height Design: Cylindrical, vertical with a lower, inwardly curved conical bottom, supported by concrete with an upper conical bottom Propeller agitator in the cylinder at the bottom, installed at an angle, 15 kW, 960/min Insulation around the cylinder and upper bottom Cover completely welded Connections: 1 manhole 320 x 420 in the cylinder Vent Ø600 mm with hood in the upper bottom with a spray head, removable Condensate line drawn down laterally CIP line DN 65 drawn down laterally to operating height, tapering to DN 40 1 cable duct Ø25 drawn down to operating height as well as a measuring connection in the upper bottom 1 x measuring connection 1 x DRD flange 1 x sampling point in the cover Outlet at the lowest point DN 100

Condition: ready for operation (used), functionality: fully functional, CNC FLOOR TYPE BORING MACHINE MAKE TITAN MOD. AF 150 SPINDLE SIZE 150MM, ISO 50 X TRAVEL 3000MM Dedpeztq Ayefx Aa Hocl Y TRAVEL 2000MM W TRAVEL 800MM ROTARY TABLE 2000 X 1700 MM ROTRARY TABLE TRAVEL 1000MM LOADING CAPACITY ON TABLE 15 TON CNC NUM

Condition: excellent (used), RS Simulators Djdpfxjzd Sfqs Aa Hjcl Here we offer a temperature test chamber. Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Time deviation: ±1 K according to DIN 50011 in an empty test chamber Average heating time: approx. 3 K/min (according to DIN 50011 Part 12) Average cooling time: approx. 3 K/min (according to DIN 50011 Part 12) Test chamber dimensions: Width 530 mm x Height 530 mm x Depth 530 mm External dimensions: Width approx. 900 mm x Height approx. 1800 mm x Depth approx. 1400 mm Total power: approx. 6 kVA Current consumption: 12 A Main fuse: 3 x 16 A, slow-blow Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 600 kg Type: TS 150/75 Refrigerant: R404A / R23 Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), functionality: fully functional, Used Maguire plastic drying units are for sale. This listing includes a total of 13 units, with the option to purchase individual units or a larger package. Available are Low Pressure Dryer and Vacuum Batch Dryer / vertical dryer models. Condition as shown in the photos. Price depends on the selected unit and quantity. These dryers are designed for drying plastic granules. The units are used, and their technical and visual condition corresponds to the photos. Additional photos of a specific dryer can be provided upon request. Available units: No. Designation Type / model as shown in the photos 1 D067 Maguire Low Pressure Dryer, model LPD2HE4 Dcsdpfx Aaezc D Ebj Hsl 2 D049 Maguire Low Pressure Dryer, model LPD1HE4 3 D084 Maguire Low Pressure Dryer 4 D099 Maguire Low Pressure Dryer, model LPD1HE4 5 D054 Maguire Low Pressure Dryer, model LPD1HE4 6 D051 Maguire Low Pressure Dryer, model LPD1HE4 7 D065 Maguire Low Pressure Dryer, model LPD1HE4 8 D071 Maguire Low Pressure Dryer, model LPD1HE4 9 D068 Maguire Low Pressure Dryer, model LPD2HE4 10 D076 Maguire Vacuum Batch Dryer, model VBD-150 11 D081 Maguire Vacuum Batch Dryer, model VB-150 12 D089 Maguire Vacuum Batch Dryer, model VB-150 13 D091 Maguire Vacuum Batch Dryer, model VB-150