5-axis Portal WALDRICH SIEGEN PF-F-150
WaldrichSiegen PF-F 150 530/400

Name: WaldrichSiegen PF-F 150 530/400
Brand: WaldrichSiegen
Availability: InStock

Condition

Used

Location

Babberich

5-axis Portal WALDRICH SIEGEN PF-F-150 WaldrichSiegen PF-F 150 530/400

Machine data

Machine type:: 5-axis Portal WALDRICH SIEGEN PF-F-150

Manufacturer:: WaldrichSiegen

Model:: PF-F 150 530/400

Condition:: good (used)

Price & Location

Location:: Transito 21, 6909 DA Babberich, Nederland

Call

Technical details

Travel distance X-axis:: 12,000 mm

Travel distance Y-axis:: 7,300 mm

Travel distance Z-axis:: 3,000 mm

Total length:: 30,000 mm

Table length:: 12,000 mm

Table width:: 4,730 mm

Total width:: 12,000 mm

Total height:: 10,475 mm

Table load:: 250,000 kg

Overall weight:: 400,000 kg

Details about the offer

Listing ID:: A21477992

Reference number:: 9456

Update:: 11.03.2026

Description

Make : Waldrich - Siegen
- Typ : PF-F-150(1)-530/400
- No. : 11.093/0
- Age : Overhault 2004 ( Euro 2.2 Mil)
X Travel : 12.000
- Y Travel : 7.300
- Z Travel : 3.000
Nljdpfx Asytrxkecmoc
- W Travel : 4.000
- Between column : 5.000
- Table width : 4.730
- Table length : 12.000
- Table load : 19 t / mtr. Ca. 250 ton
- Table feed : 10.000 mm/min.
- W axis : 3.000 mm/min.
- T axis : 6.000 mm/min.
- Cross adj. milling head :
- Vert. adj. cross rail :
- Horizontal hydrostatic spindle ram
- Milling spindle Ø : 560
- Milling tool taper : iso 60
- C axis feed : 5.000 mm/min.
- Milling motor : 90 kW
- Spindle speed : 2.500 R/pm
- Z axis stroke : 3.000
- Z axis feed : 2.000 mm/min.

- Milling Küma Angle head WF2 90 kw- 450
- Milling Küma Uni. UB1D 60 kw - 2400
- Milling Küma Fixed GB1D 90 kw- 2400
- Milling Küma Angle head WF1?
- Electric requirement : 3 x 400 V / 50 Hz
- Power requirement : 600 kVA / 630 Amp
- Capacity 4.000 L coolant true spindle 20/40 Bar
Machine is rebuild in 2004 by Schiess
Bed – Table assembly group:
* Renewal of sliding lining
* Grinding of guideway
* Renewal of table drive
* Direct linear measuring syst.
* Hydrostatic
Portal and cross rail:
* Modification of adjusting spindle trape
Zoidal spindle was recplaced with ball screw
* Direct linear measuring syst.
* New drive motors for relization of higer
speed on feed axes of milling support.
* New milling support with hydrostatic guideways
Electric system:
* Complet elctric cabinet switchgear
* Complet new wire
* Siemens Sinumrik 840 D in 6 axis !!
Equipment / parts :
* Complet new raumag janich covers
* Complet new double chip conveyor
* Complet with big tooling packet
* Complet with big mounting equipment
- Under power in Europe
- Free directly
- Controlled axis X / Y / Z / W / C / B axis
- Over all height : 10.475 mm
- Over all width : 11.934 mm
- Over all length : 30.000 mm
- Total weight : ca. 400.000 Kg

Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining.
Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Seller

Registered since: 2008

391 listings online

Call

Send inquiry

Telephone & Fax

+31 316 4... show

+31 316 2... show

Fax:

These listings may also fit your interest.

Listing

Mudersbach

1,141 km

Lathe
BernardoTitan 660 x 2000

€27,890

ONO plus VAT

Call

Condition: new, Bernardo Universal Lathe Titan 660 x 2000 Technical Specifications Distance between centers: 2000 mm Center height: 330 mm Swinging diameter over bed: 660 mm Swinging diameter over cross slide: 900 mm Swinging diameter over compound slide: 460 mm Bed width: 400 mm Spindle bore: 105 mm Spindle mounting: DIN 55029, D1-8 Speed range (16): 25 – 1600 rpm Range of longitudinal feeds (25): 0.044 – 1.48 mm/rev Range of cross feeds (25): 0.022 – 0.740 mm/rev Metric threads (54): 0.45 – 120 mm Inch threads (54): 7/16 – 80 TPI Tailstock diameter: 90 mm Tailstock travel: 235 mm Tailstock arbor: MK 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (W x D x H): 3630 x 1200 x 1520 mm Weight approx.: 2900 kg Features Versatile applications in general mechanical engineering, production, and individual part manufacturing… Central, easy-to-use control for feeds and threads with lead and driving screw Prismatic bed made of cast iron, inductively hardened and precision-ground Modern main spindle bearing with tapered roller bearing in a precision design Hardened and ground gears and shafts, including in the feed drive Standard with rapid traverse in longitudinal and cross directions to reduce idle times Large spindle bore (105 mm) for workpieces with a large diameter Soft start via the mechanical lamellar clutch Electromechanical foot brake to reduce idle times Excellent chip removal performance, even during facing operations The bed is provided with robust ribs to stiffen the bed guidance and minimize the influence of vibrations Scope of supply 3-axis digital display ES-12 V with LCD display Slip clutch Rapid traverse in longitudinal and cross directions LED machine light 3-jaw steel chuck PO3-315 mm / D8 Faceplate 450 mm Fixed steady rest – bore diam. max. 180 mm Traveling steady rest – bore diam. max. 120 mm 2 live centers Motor with magnetic brake according to CE standard Foot pedal with braking function according to CE Initial filling with Shell Tellus 46 Coolant system Nlsdofbbx Ropfx Acmec Quick-change tool holder with 4 inserts Protective device for quick-change tool holder Change gears Reducing sleeve Chip guard Cable routing via energy chain Operating tools

See details

Listing

Travelling column milling machine Mecof MASTERMILL

Torbole Casaglia

1,585 km

Travelling column milling machine
MecofMASTERMILL

Call

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, table length: 2,500 mm, table width: 2,000 mm, table load: 30,000 kg, spindle motor power: 38,000 W, rotary table diameter: 2,000 mm, feed length W-axis: 1,500 mm, Equipment: rotational speed infinitely variable, CNC travelling column milling machine MECOF EMCO mod. MASTERMILL-HPC3 Heidenhain iTNC 530 CNC control X axis 4,000 mm Z axis (vertical) 3,000 mm Y axis (cross) 1,600 mm Nledpfx Acjwzxiyjmsc Ram section 500 x 500 mm Rapid feeds 30,000 mm/min Rotary-translating table 2,000 x 2,500 mm Table load capacity 30,000 kg Translation 1,500 mm Continuous rotation and translation Automatic bi-rotary head with 360,000 positions A axis 0.001° B axis 3° Spindle taper ISO 50 Maximum speed 6,000 rpm Spindle power 38 kW Tool changer with 80 positions Complete with: - Renishaw tool measurement system - Internal high-pressure coolant 20 bar - Chip conveyor

See details

Listing

Travelling column milling machine PAMA SPEEDRAM 2000

Lontzen

1,021 km

Travelling column milling machine
PAMASPEEDRAM 2000

Call

Condition: good (used), Year of construction: 2005, travel distance X-axis: 12,000 mm, travel distance Y-axis: 3,500 mm, Technical Specification - X-axis (longitudinal travel - table): 12,000 mm - Programmable feed rate: 0.5 – 6,000 mm/min - Rapid traverse: 20,000 mm/min - Motor speed: 3,000 rpm Nlsdpfx Acsyuxd Nsmsc - Y-axis (vertical travel / column): 3,500 mm - Programmable feed rate: 0.5 – 6,000 mm/min - Rapid traverse: 20,000 mm/min - Motor speed: 3,000 rpm - Rated torque (motor): 42 Nm Z - W-axis (spindle head): - Boring spindle diameter: 150 mm - Axial stroke of boring spindle (Z): 1,200 mm - Rapid traverse Z-axis: 20,000 mm/min - Internal taper of boring spindle: DIN 69871, ISO 50 - Spindle diameter: 254 mm - Spindle front bearing inner diameter: 200 mm - RAM dimensions: 400 x 400 mm - Axial stroke of boring spindle (W): 1,000 mm - Rapid traverse W-axis: 15,000 mm/min - Total axial stroke (Z+W): 2,200 mm - Rated torque spindle motor W and Z-axis: 42 Nm - Number of spindle gearbox speeds: 2 - Spindle speed range: 6 – 3,500 rpm - Spindle motor power: 60 kW Clamping plate sections: - Dimensions: 2 units @ 1,500 x 4,500 mm, 1 unit 2,000 x 4,500 mm - Load capacity: 15,000 kg/m² Workpiece table (axes V1 - B1 / V2 - B2): - Table dimensions: 2,000 x 3,000 mm - T-slot size: 28 mm - T-slot pitch: 180 mm - Table top height from floor: 650 mm - Load capacity: 40 t Tool rack magazine ATC 13-150 R 147 - Maximum magazine capacity: 147 tools - Maximum tool weight: 35 kg - Maximum tool length: 700 mm - Tool taper: DIN 69871 - Tool change time: 28 sec Milling head with indexed vertical axes, model TTL 2 18 360 - Tool holder: ISO 50, DIN 69871 EQUIPMENT: - CNC control: Heidenhain iTNC 530 - Electronic handwheel - Chip conveyor (manufactured: 2023) - CE marking - Documentation

See details

Listing

Cycle controlled lathe Weisser Heinbronn HECKTOR CNC 295x2000

Fuldatal

1,225 km

Cycle controlled lathe
Weisser HeinbronnHECKTOR CNC 295x2000

Call

Year of construction: 1980, condition: good (used), A used, very well-maintained cycle-controlled lathe from Weisser Heilbronn with a SIEMENS control system. Distance between centers 2000 mm Center height 295 mm Swinging diameter over bed 600 mm Swinging diameter over cross slide 260 mm Swinging diameter in the crotch 800 mm Total length of the crotch 375 mm Nljdpegyy I Ajfx Acmec Bed width 450 mm Travel of X-axis 350 mm Travel of Z-axis 1850 mm Spindle nose DIN 55022, size 8 Spindle speed, number 18, 14 – 1400 rpm Spindle bore 71.5 mm Diameter of front bearing 110 mm Feed range 0.01 – 40.95 mm/rev Rapid traverse 8 m/min DC drive 15 kW 400V 50Hz Max. permissible torque on the spindle 2500 Nm Tailstock quill 80 mm Quill stroke 250 mm Internal taper in quill MK 5 Length x width x height Machine weight 5500 kg Accessories: Tailstock Pneumatic three-jaw chuck with replaceable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the center, size "C" Four-position turret behind the center Tool holder Coolant system Follow rest, pneumatically actuated Technical data and dimensions: Subject to change without notice. Video conference via WhatsApp possible after scheduling an appointment.

See details

Listing

Front-Loading Panel Saws BIESSE SELCO WN 2

Italy

2,009 km

Front-Loading Panel Saws
BIESSESELCO WN 2

Call

Listing

Band saw KASTO - KASTOtec A3 KASTO KASTOtec A3

Babberich

984 km

Band saw KASTO - KASTOtec A3
KASTOKASTOtec A3

Call

Condition: good (used), Year of construction: 2001, Cutting 90°: 330 Cutting flat 90°: 330 x 330mm Cutting speed Vario:12 - 120 Circle blade size: 6830 x 41 x 1,3mm Power: 7.5kW Length: 4600mm Width: 2150mm Height: 2310mm Weight: 4300kg Nsdpfx Aju R R Acocmslc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

VTL for railway wheels RAFAMET KOB-125 RAFAMET KOB-125 KOB-125

Mierzyce

1,842 km

VTL for railway wheels RAFAMET KOB-125
RAFAMET KOB-125KOB-125

Listing

Lathe Ø 2000 x 35,000 mm x 63 tons SKODA SUT 200 TD

Denmark

1,177 km

Lathe Ø 2000 x 35,000 mm x 63 tons
SKODASUT 200 TD

Call

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Nlsdpfx Acsynky Aomsc Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

See details

Listing

Glass cutting desk INTERMAC Genius 37 RSA

Belgium

906 km

Glass cutting desk
INTERMACGenius 37 RSA

Call

Listing

Mamer

1,073 km

Vertical lathe
SCHIESS40 DS 350

Call

Condition: good (used), functionality: fully functional, Original CNC (not a retrofit from conventional to CNC) Control: Siemens 8-M Faceplate diameter: 3500 mm Max. turning diameter: 4000 mm Max. turning height: 2500 mm Nljdpsxyh Hvofx Acmoc Vertical stroke of ram: 1600 mm Horizontal stroke of ram: 2200 mm Ram cross-section: 250 x 210 mm Min. internal diameter: 360 mm Vertical travel of cross-slide: 2000 mm/min Chuck motor power: 71 kW Chuck speed: up to 90 rpm (2-speed gearbox) Table load capacity: 40 tons Feed rate: 1000 mm/min Rapid traverse: 6000 mm/min

See details

Advertise here