Used Friction Feeder for sale (2,796)

Condition: used, functionality: fully functional, Work surface: 1,400 x 5,000 mm Duodpfx Aetpg A Eefnjn Stainless steel lining Drive with 2 x 2.2 kW unbalance motors

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm Duedpfxsma Dkfo Afnen seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Year of construction: 2000, condition: excellent (used), For sale: Professional closed powder feeder Sulzer Metco / Oerlikon Metco – model 9MPE-DJ (Closed Loop Powder Feed Unit). The device is designed for precise and stable dosing of powders in thermal spray processes (HVOF, APS, plasma, etc.). Nameplate data: • Model / Type: 9MPE-DJ • Year of manufacture: 2000 • Power supply: 115 / 215 / 230 V • Frequency: 50 / 60 Hz • Power: 0.92 kW • Current: 4 A • Phase: single-phase Features and equipment: • Closed-loop powder feed control – excellent repeatability of dosing • Operator panel with display and membrane keypad • Precision carrier gas regulators (rotameters, pressure gauge) • Powder hopper/tank located at the bottom of the cabinet • Mobile housing on casters • Complete set as shown in the photos Technical condition: Duodpfxoyg U Rvo Afnen • Device is complete and well maintained • Normal signs of use consistent with age • Visible Oerlikon Metco service stickers (serviced in the past) • Was recently in use in an industrial installation Applications: • Thermal spray lines (HVOF, plasma, arc, flame) • R&D laboratories and industrial production • Precision dosing of metallic and ceramic powders

Year of construction: 2015, condition: used, functionality: fully functional, A used electric 4-step feed unit manufactured by Ingenjörsfirma Gösta Hedlund AB in very good condition. Duodpfx Afeyiaafjnjn

Condition: new, feeder 4 rollers roller DM 120 mm roller width 60 mm motor power 0,75 kW motor speed 1.400 U/ min feeder speed 3 - 18 m/min, variable weight approx. 37 kg Dujdpfeh Dikwjx Afnon without stand optional with stand ‘standard’ or ‘stand 1050’ Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2000, A receiving conveyor with steel hinged plate belt. It was most recently loaded using a wheel loader and a tipper truck. Overall length: 9.6 m Filling hopper dimensions: 8.0 x 3.6 m Conveyor width at bottom: 1.85 m Maximum width with drives: 3.2 m Conveyor belt width: 1.3 m Overall height: 5.3 m Belt speed: 0.05–0.29 m/min Dujdoiwxmbjpfx Afnsn Conveyor chain: FV 315 with bushing and protected roller Throughput: 3 to 14 m³/min Belt gear motor SEW: 0.75 kW Speed: 0.2 rpm Torque: 18,000 Nm Reel shaft speed: 64 rpm Reel gear motor Flender: 7.5 kW Total weight: approx. 20 tonnes With steep-angle conveyor belt

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, *complete with SKAKOTROL control-unit C 400* volume: 700 Kg. loading capacity: max. 500 Kg. Dujdpfx Aswhqkcofnjn

Condition: used, Vibratory parts feeder, vibratory finishing machine, circular vibratory bowl, tumbling drum, used machine Manufacturer: Rösler Oberflächentechnik Overall dimensions: Width: 1310 mm Duedpfx Aeyh En Ejfnjn Depth: 1185 mm Height: 1440 mm Weight: 690 kg Trough size : Ø 1090, depth to discharge height : 240 mm Electrical data: 400 V Applications: deburring, grinding, polishing, cleaning The Rösler R185 vibratory finishing machine is ideally suited for deburring, edge rounding, cleaning, and surface finishing of metal and other components. Reliable, industrial-grade German machine designed for continuous operation.

Condition: used, Friction press, flywheel press, forging press, screw press, used machine Manufacturer: ASJ Type: J53-160B Overall dimensions: Width: 1850 mm Depth: 1380 mm Height: 3140 mm Weight: 8190 kg Table size: 560 × 510 mm Dusdoxpf U Aopfx Afnon Clear opening without table: 560 × 560 mm Clear opening with table: 260 mm Nominal pressure: 160 tons Stroke length: 360 mm

Condition: used, Year of construction: 2022, - FANUC 0i-TF CNC Control - 60° slant bed - Cross slide with linear guides - Part separator - Coolant unit - Chip conveyor - Power on time: 2775 h - Machining time: 743 h - Year of manufacture: 2022 LNS Sprint 552 - Bar feeder - Bar diameter: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar capacity diameter: 32 mm - Max. spindle speed: 5000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Dujdpfewrp Dpjx Afnon Working area: - Workpiece diameter/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Cross slide "Gang Type": - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank diameter: 20 mm - Tool holder (square): 12 x 12 mm Coolant system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Power 100%/40% DC: 3.7 / 4.4 kW - Torque: 20.2 Nm - Energy consumption: 5.4 kWh - Total power: 8.8 kW - Operating voltage: 400 V - Rated current: 16 A Dimensions & weight: - Footprint: 1900 x 1030 mm - Weight: 1230 kg

Year of construction: 2016, condition: excellent (used), 1 used short bar loader make Breuning type ILS RBL 80/12 Duedeht Rl Eepfx Afnon Year 2016 clamping range 5-80 mm diameter Length 100-1200 mm

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Feature Details Rotor Diameter 500 mm Rotor Length 3000 mm Rotor Speed 1000 rpm Drive Power 18.5 kW Screen Hole Size Standard: 2.5 mm; Max: 3 mm Duedewm I S Ijpfx Afnsn Housing Material Stainless Steel Rotor Material Mild Steel Bearing Type Flange Bearing Throughput (HDPE) Up to 3.5 tonnes per hour Throughput (PET) Up to 3.5 tonnes per hour Throughput (LDPE) Up to 2 tonnes per hour • Inclined cylindrical trough design for efficient washing and transport • High-speed paddle rotor generates friction to clean contaminants • Replaceable screen with automatic rinsing/self-cleaning system • Water injection system for enhanced cleaning performance • Easy maintenance with accessible rotor and screen

Condition: used, Bar Feeder, Automatic Bar Feeder, Used Machine Manufacturer: IEMCA Model: Master 100 F/R Overall Dimensions: Width: 4900 mm Depth: 1115 mm Height: 1800 mm Weight: 2200 kg Duodsxab Adepfx Afnjn Year of Manufacture: 2012 Electrical Data: 400V; 8.4A Bar Diameter Range: 10–100 mm Bar Length: 1100–4200 mm Maximum Bar Weight: 180 kg Maximum Feeding Speed: 500 mm/sec Magazine Types: UP: 500 mm usable length MP: 290–330 mm F: 2.5-ton stacked magazine Changeover Time: 31 seconds Installed Power: 1.5–3 kW Pneumatic System Pressure: 6 bar

Condition: good (used), Year of construction: 2005, functionality: fully functional, Computer renewed Software WIN 7 Feeder package: Single feeders: 30 pcs 8mm tape 20 pcs 12mm tape 6 pcs 16mm tape 5 pcs 24mm tape Block feeders: Duedpfxex Sd Ico Afnjn 3 pcs 10x8mm tape Tube feeders (via compressed air): 1 pc 20-position 3 pcs 10-position various spare parts

Condition: used, functionality: fully functional, TECHNICAL SPECIFICATIONS: Djdpsxfgpgefx Afnsun - Min. workpiece length: 400 mm - Max. length: 6000 mm - Max. workpiece width: 200 mm - Max. workpiece thickness: 200 mm - Roller motor power: 0.75 kW - Chain motor power: 1.1 kW - Feed rate adjustable via geared motor - Roller speed: 19 - 118 m/min - Belt speed: 10 - 60 m/min - 8 guiding belts - 17 steel feed rollers - Roller diameter: 80 mm - Roller height from base: 900 mm - Pneumatic pressing - Dimensions (L/W/H): 565 / 175 / 120 cm - Weight: ~ 1500 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin Duedpox I Icvofx Afnsn -Transport dimensions: 600/500/H130 mm -Weight: 6 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ Dsdpsx I H Rxsfx Afnjun -Length: 8 m -Connector: 5-pin -Transport dimensions: 590/500/H150 mm -Weight: 8.3 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder Dedpfx Afsx I E U Asnjun -Type: DIX MPZ 2-304 -Length: 8.5 m -Connector: 5-pin -Transport dimensions: 580/450/H130 mm -Weight: 7.1 kg

Condition: good (used), MIG/MAG hose package for robot -Hose package with: wire feeder for robots or welding machines -Length: 2.5 m -Water cooled -Number: 2 wire feeders available Dsdofc T Tuopfx Afnjun -Price: per piece -Weight: 5.5 kg

Condition: good (used), Wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder -Wire feeder case: with intermediate hose package, water-cooled -Wire feed case: 4-roller drive, Ankarsrum motor Duedpfox I Ef Iox Afnsn -Hose package: Length 15 m -Transport dimensions: 920/630/H300 mm -Total weight: 41 kg

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder SORTIMAT Vibratory bowl, sorting device / screw feeding with vibratory feeder for screw assembly technology Dusdpox N Ik Asfx Afnsn Feeding system, feeding unit Manufacturer: SORTIMAT Technology GmbH & Co. Model: SM 200 Year of manufacture: approx. 2000 Top bowl diameter: 270 mm Bottom bowl diameter: 180 mm Internal bowl height: approx. 75 mm Sorting track width: 13 mm Overall height (drive + bowl with sorting track): 250 mm Control voltage: 24 Volt DC (external power supply required) Power connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24VDC power unit). - REO controller type Reovib R6 / 439 for adjustable vibration speed Required space Ø x H: 270 x 250 mm Weight: 17 kg In good condition A bowl feeder always consists of two main components: 1) Sorting bowl, in which parts are oriented 2) Drive unit, which creates vibrations in the sorting bowl through mechanical oscillations, thus moving the parts.

Condition: used, Year of construction: 2000, LNS Hydrobar bar feeder 6.65 HS-4.4 was mounted on a Traub TNA300 TX8H. Dusdpfxsyazmwo Afnsn

Condition: used, Year of construction: 1999, FMB Turbo bar feeder Turbo 10-65XT/3200, previously installed on a Traub TNC65 TX8H Djdpfsyazh Iex Afnoun

Condition: new, VSA 2048 L Holzkraft Feeder - Exhibition Machine - - Number of feed rollers: 4 - Feed speed: 2 - 33 m/min - Speed levels: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33 m/min - Maximum projection: 1050 mm - Roller diameter: 120 mm - Roller width: 60 mm - Roller spring travel: 20 mm Dimensions and weights: Duedpfx Afswfhg Nsnen - Length (product) approx.: 1665 mm - Width/depth (product) approx.: 220 mm - Height (product) approx.: 540 mm - Net weight approx.: 73.5 kg - Explanation of net weight approx.: including stand Electrical data: - Drive motor power: 0.75 kW - Supply voltage: 400 V - Mains frequency: 50 Hz - New exhibition machine -

Condition: used, Feed unit MAKA -used- infinitely variable feed speed ----- Technical data ----- Rollers: 3 pieces Dusdpju R S R Ujfx Afnon