Used Friction Feeder for sale (2,728)

Condition: ready for operation (used), Year of construction: 2002, A bar loading magazine FMB for long turning automatics is offered. Bar diameter (min./max.): 2mm-23mm, max. bar length: 4200mm, max. remnant length: 420mm, loading compartment length/magazine length: 235mm, compressed air connection: 0.6MPa (6bar). An on-site inspection is possible by appointment. Nwsdpexph Swofx Agwed

Condition: ready for operation (used), A total of four feeder trolleys are available for ASM/Siplace. Documentation available. On-site inspection is possible. Nwjdsv I U H Aepfx Agwjd

Year of construction: 1999, condition: excellent (used), functionality: fully functional, For sale here is a Foellmer OK 90 strip insertion unit - Subtramat - Machine is on castors - Weight: 35 kg - Height adjustable for low or high deliveries - Power connection: 230V - Coupled to the printing press via cable - Strip length: 10 cm, cutting time is adjustable - Lance: 21 cm from the front edge of the machine Nwodpfsgllp Hsx Agwsd - Lance height parallel to the ground approx. 70–140 cm (height can be easily adjusted using different tubes) - 5 rolls of insertion paper included

Condition: good (used), Year of construction: 2007, I will sell a feeder for salt, feed, etc. Nodsv A Rqmspfx Agwswd

Condition: used, functionality: fully functional, Work surface: 1,400 x 5,000 mm Stainless steel lining Nodpfxetpg A Eo Agwswd Drive with 2 x 2.2 kW unbalance motors

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, *complete with SKAKOTROL control-unit C 400* Nwedpfx Agjwhqkcowed volume: 700 Kg. loading capacity: max. 500 Kg.

Year of construction: 2016, condition: excellent (used), 1 used short bar loader make Breuning type ILS RBL 80/12 Year 2016 Nwjdpoht Rl Esfx Agwod clamping range 5-80 mm diameter Length 100-1200 mm

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder Nedpfsx I Icvjx Agwowd -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 600/500/H130 mm -Weight: 6 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin Njdpfex I H Rxex Agwowd -Transport dimensions: 590/500/H150 mm -Weight: 8.3 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder Nwjdpfxox I E U Ae Agwsd -Type: DIX MPZ 2-304 -Length: 8.5 m -Connector: 5-pin -Transport dimensions: 580/450/H130 mm -Weight: 7.1 kg

Condition: good (used), MIG/MAG hose package for robot -Hose package with: wire feeder for robots or welding machines -Length: 2.5 m -Water cooled -Number: 2 wire feeders available Nsdpfxefc T Tus Agwswd -Price: per piece -Weight: 5.5 kg

Condition: good (used), Wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder -Wire feeder case: with intermediate hose package, water-cooled Nwsdpfx Agjx I Ef Ijwed -Wire feed case: 4-roller drive, Ankarsrum motor -Hose package: Length 15 m -Transport dimensions: 920/630/H300 mm -Total weight: 41 kg

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 20161220, For sale: FS1000 friction washer in very good working condition, ideal for plastic recycling lines. Designed for intensive cleaning of flakes and films using mechanical friction and a water injection system. * High-speed rotor system (approx. 1000-1200 rpm) * Corrosion-resistant steel construction Nedpfx Aoymy Dnjgwjwd * Continuous in-line washing operation * 3 mm screen ensures efficient separation of impurities * Can be integrated with flotation tank and drying system * The machine is fully refurbished and in perfect working order

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm Nwodema Dkfopfx Agwed weight 3000 kg

Condition: used, Feed unit MAKA -used- Nwjdpfeu R S R Uex Agwed infinitely variable feed speed ----- Technical data ----- Rollers: 3 pieces

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Nedpfx Aei El Ucegwswd

Condition: like new (used), Machine ready for operation, hopper with roller inspection feeder. Njdpfx Aeytnf Tjgwswd

Condition: like new (used), Machine ready for operation, equipped with a drip tray conveyor with a perforated belt. Can be used as an inspection conveyor, made of acid-resistant stainless steel Inox. Nwsdpfoytm Ndjx Agwod

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder SORTIMAT Vibratory bowl, sorting device / screw feeding with vibratory feeder for screw assembly technology Feeding system, feeding unit Manufacturer: SORTIMAT Technology GmbH & Co. Model: SM 200 Njdpfx Aox N Ik Asgwjwd Year of manufacture: approx. 2000 Top bowl diameter: 270 mm Bottom bowl diameter: 180 mm Internal bowl height: approx. 75 mm Sorting track width: 13 mm Overall height (drive + bowl with sorting track): 250 mm Control voltage: 24 Volt DC (external power supply required) Power connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24VDC power unit). - REO controller type Reovib R6 / 439 for adjustable vibration speed Required space Ø x H: 270 x 250 mm Weight: 17 kg In good condition A bowl feeder always consists of two main components: 1) Sorting bowl, in which parts are oriented 2) Drive unit, which creates vibrations in the sorting bowl through mechanical oscillations, thus moving the parts.

Condition: like new (used), Year of construction: 2021, operating hours: 15 h, functionality: fully functional, input voltage: 230 V, Equipment: CE marking, Bin tipper with 130° rotation Maximum load 200kg at 350mm from the carriage Loading of 80, 120, 140, 240-litre wheelie bins at floor level Bin retention by the wheels Nedex Hq Avepfx Agwswd Discharge height 1284mm from ground level Cycle time: lifting 17s; lowering 12 seconds Power supply 230V Double control panel Up and down buttons with operator safety; Continuous contact and operation validation required

Condition: used, Year of construction: 2022, - FANUC 0i-TF CNC Control - 60° slant bed - Cross slide with linear guides - Part separator - Coolant unit - Chip conveyor - Power on time: 2775 h - Machining time: 743 h - Year of manufacture: 2022 LNS Sprint 552 - Bar feeder - Bar diameter: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar capacity diameter: 32 mm - Max. spindle speed: 5000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Working area: - Workpiece diameter/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Nsdpfx Agewrp Dpewewd Cross slide "Gang Type": - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank diameter: 20 mm - Tool holder (square): 12 x 12 mm Coolant system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Power 100%/40% DC: 3.7 / 4.4 kW - Torque: 20.2 Nm - Energy consumption: 5.4 kWh - Total power: 8.8 kW - Operating voltage: 400 V - Rated current: 16 A Dimensions & weight: - Footprint: 1900 x 1030 mm - Weight: 1230 kg

Condition: excellent (used), For sale: aluminium feeder with dimensions 1000 cm x 50 cm, several units available. The listed price is for one piece. Nedpfxoyr Sg So Agwowd

Condition: good (used), Year of construction: 2005, functionality: fully functional, Computer renewed Software WIN 7 Nwedpfjx Sd Icox Agwed Feeder package: Single feeders: 30 pcs 8mm tape 20 pcs 12mm tape 6 pcs 16mm tape 5 pcs 24mm tape Block feeders: 3 pcs 10x8mm tape Tube feeders (via compressed air): 1 pc 20-position 3 pcs 10-position various spare parts

Condition: new, Year of construction: 2025, High quality, solid construction, reliability and ease of use are the distinguishing features of POWER ROLL feeds. Speeds 3.5 / 5/7/10 / 12.5 / 16/25/32 m / min Feed rollers 4 pcs. Roll diameter 120 mm Roll width 60 mm Nwjdpfx Agjgykg Newjd Roller spring deflection 20 mm Engine power 0.75 KW (1.0 PS) Voltage 400 V / 50 Hz Weight 61 kg

Condition: new, Year of construction: 2025, High quality, solid construction, reliability and ease of use are the distinguishing features of POWER ROLL feeds. Speeds 3.5 / 5/7/10 / 12.5 / 16/25/32 m / min Feed rollers 3 pcs. Roll diameter 120 mm Roll width 60 mm Roller spring deflection 20 mm Motor power 0.75KW (1.0 PS) Voltage 400V / 50 Hz Weight approx. 57 kg Nwsdpfxsgykgzo Agwsd