Used Fermenter for sale (196)

Condition: used, Second-hand New eco-tec ALLin DRYer belt dryer for drying wood chips for the production of briquettes. Possible products: Separated fermentation substrate (fine-textured, air-permeable, frost-free, free from foreign matter, fully fermented; base material: maize silage, slurry, cereals, ≥30% dry matter) Hsdpjzzk H Uefx Akiew Wood chips G30 (free-flowing, air-permeable, frost-free, > 0°C, low in resin, free of coarse material, free of foreign matter) Technical data: - Heating medium: Hot water 90°C flow / 70°C return - Heating capacity: ~ 400 kW - Drying temperature: approx. 80 °C at 90° flow - Weight: ~ 12 t

Condition: used, Small brewing system with 3 stainless steel brewing vessels with wort cooling and tanks for fermentation and storage. The system consists of the following components: - Mash tun (Inox Behälter GmbH, 2019) with a gross volume of 152 litres and adjustable agitator. Indirectly heated with timer and temperature control - Lauter tun (Inox Behälter GmbH, 2019) with a gross volume of 171 litres and false bottom. - Wort pan (Inox Behälter GmbH, 2023) with a gross volume of 250 litres. Indirectly heated with timer and temperature control. - Mash pump (Zuwa, 2019) with a power output of 0.37 kW. - Wort cooler (Kelvion, 2016). - 4 single-walled storage tanks (Eurolux) standing on 4 feet, 3 of which have a gross capacity of 250 litres and 1 of which has a gross capacity of 200 litres. The tanks are each equipped with a immersion sleeve for temperature measurement and can be opened via a screw-on manhole cover. Each with a drain pipe and manual valve as well as a sampling tap. Additional title: 3-unit stainless steel brewhouse with fermentation and storage tanks; built in 2 Cast wort capacity: 230 l Operation / Control: Temperatursteuerung und Timer and Sudgefäßen Material: All vessels from stainless steel 1.4301 (AISI 304) Base construction: Mobile brewing vessels on wheels Features: Mashing tun, lauter tun, wort pan, mash pump, wort cooler, 4 storage tanks Hjdpfxoztyaue Akijw

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, warranty duration: 3 months, year of last overhaul: 2026, type of input current: three-phase, overall weight: 195 kg, Fat recovery unit Jufeba WW-GW 05 2 rotating baskets for a maximum of 36 pieces each Temperature controller with safety thermostat Hsdpfszpg I Dox Akijw Steam cover, drip tray with fermentation cart and aluminum tilting trough DGUV V3 electrical safety inspection available only from us Connection 400V, 16A-CEE plug Used unit with warranty Visit our large showroom!

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Hjdpjzk Eqmofx Akijw Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Hodoztpxmspfx Akisw

Condition: good (used), Containers, storage containers, ceramic containers, stoneware containers, ceramic storage vessels, earthenware containers, acid-resistant stoneware, fermentation crocks, sauerkraut crocks, ceramic barrels, earthenware pots -Manufacturer: VEB Crinitz N/L, Ceramic containers, acid-resistant stoneware -Capacity: 100 liters -Material: KER 515 acid-resistant stoneware ceramic GDR TGL standard 7838 -Opening: Ø 205 mm -Number: 3 containers available -Price: per piece Hodpoz Epb Nofx Akisw -Dimensions: 490/450/H810 mm -Weight: 84 kg/unit

Condition: used, Year of construction: 2017, machine/vehicle number: LC694, Used PRO-PAK small dairy processing line 2000 LPHTechnical Specifications & Performance DataThis used bottling line is a complete dairy processing and industrial packaging installation designed for milk, yogurt, cheese, cream and cream-based food production. Manufactured by PRO-PAK, the installation combines milk reception, pasteurization, separation, fermentation, cheese processing, packaging, utilities and laboratory equipment.Milk processing capacity: 2000 L/hPotential daily processing capacity: 15000 L of milk per day with additional vesselsPasteurizer capacity: 2000 L/hWestfalia separator capacity: 3000 L/hMilk packaging format: 1.0L bagsYogurt cup diameters: 75 mm and 95 mmAutomatic yogurt packer output: 1800 cups/hInstalled electrical power: 18 kWAdvanced Automation & Control SystemsThe line includes automatic and semi-automatic packaging equipment for dairy production. Pasteurized milk is filled by a semi-automatic bag filler, while the yogurt packaging section uses an automatic cup packer. A Videojet 1220 date coding machine with belt conveyor is included for product date marking and batch identification.The Westfalia separator is equipped with a three-phase motor rated at 380 V, 50 Hz, 4.5 kW and 10.5 A. The motor is rated IP 44 with insulation class B and operates at 965 rpm.Production Line Integration CapabilitiesThis second hand dairy processing line provides an integrated process route from raw milk reception through thermal treatment, separation, fermentation, cheese production and final packaging. It is suitable for dairy beverage production and food processing applications requiring milk bags and yogurt cups.Machine typeManufacturer / modelYearVarious EquipmentLactofriz receiving tanksPasteurizerPlate flow pasteurizerVarious EquipmentWestfalia separator2017Various EquipmentFermentation vesselsVarious EquipmentCheese production equipmentFilling MachineSemi-automatic milk bag fillerVarious EquipmentAutomatic yogurt cup packer Hjdpfj Adtyasx Akiow

Condition: used, water tank capacity: 20,350 l, Stainless steel tank made of V2A, upright, wine tank/fruit juice tank Rieger - used - Volume approx. 20,350 liters Diameter approx. 2,000 mm Hedpfx Akswlg Hnoiow Cylindrical height approx. 6,000 mm Overall height approx. 7,400 mm Outer surface: marbled Inner surface: 2B = IIIC polished Top: Dished end 2 lifting lugs Threaded welding boss, central, DN 100 to DN 40 with threaded socket DN 50 with fermentation lock valve DN 50 and check valve DN 50 Sprinkler ring Tank cylinder: Level indicator with bar, scale, and standpipe valve DN 15 Manhole 420x320 mm Sampling tap DN 15 1 ladder hook at the top Immersion sleeve for temperature indicator CIP line drawn downwards with venting line DN 40 with connecting thread DN 50 Clear drain with angled seat valve DN 50 Cooling line 3 x cooling plates (horizontal in the tank) CIP ball Bottom: Dished end Bottom rib drawn forward with angled seat valve DN 50, flush with the tank wall Outlet drawn forward with disc valve/ball valve/angled seat valve, outlet pipe DN 50 with flange 4 dome feet, height-adjustable, with washers If desired, the cooling plates in the tanks can also be removed. Otherwise, as per the photos.

Condition: used, Brewing plant with a wort output of 20 hl, consisting of the following components: 1. grist plant (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hull, floor scales, grist conveyor and control cabinet 2. 3-device compact brewhouse with insulated stainless steel vessels with copper bonnets, spindle station and control cabinet 3. fermentation and storage cellar with 4 x fermentation vats (Joh. Albrecht, 1999, 25 hl), 1 x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 x storage tank (Joh. Albrecht, 1999, 44 hl, 0.99 bar) and 6 x storage tank (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4th pressurised tank cellar with 2 x pressurised tank (Speidel, 2021, 86 hl, 3 bar), 1 x pressurised tank (INOX, 2018, 67 hl, 3 bar) and 4 x pressurised tank (Joh. Albrecht, 1999, 12 hl, 2.5 bar). All tanks with jacket cooling. 5. keg cleaning and filling system (BTB. Multimat MT/2, 1997, 17-20 kegs/h) 6. refrigeration system as ice water generator (Joh. Albrecht, 1999, cooling capacity 14.5 kW) 7. steam generator with soft water system (Jumag, 2000, 224 kg/h steam, oil-heated) 8. 40 hl hot water tank (Joh. Albrecht, 1999), heatable, with switch cabinet Interested in only part of the system? The system is offered as a consignment sale. A partial sale might be possible – feel free to contact us and submit your offer. Additional title: cast wort volume 20 hl, years of manufacture 1997-2001 Hsdewgc Udopfx Akiew Cast wort capacity: 20 hl Features: Grist system; 3-device compact brewhouse; fermentation vats; fermentation, storage and pressurised tanks; keg system; refrigeration system; steam generator, warm water tank, CO2 liquid gas tank

Condition: used, Year of construction: 2016, Overview This brew house was built in 2016 by Spanish manufacturer Prominox Villarobledo and has a wort volume of 30 hectoliters. Fermentation and storage cellars and various accessories are included. All the equipment has already been dismantled and stored. Scope of delivery  - Electrical panels for tanks and pumps - Stainless steel tank | model DFF99 | 2000 | 25,000 liters - Labeler | model MC-220 | 2016 | 1300 bph (up to 1.5 liters) - Filler | model AM DPS 811G | 2016 | 1200 bph (0.33 liters) - Sealer | model SK2 | 2016 | Semi-automatic box sealer, motor speed: 20 m/min, power: 0.13 hp - 2x Horizontal tank | model AD MERKBLATTER | 2016 | Isobaric 3,000 liters - 2x Fermentation tank | 3,000 liters - 2x Fermentation tank | model PROMINOX | 2016 | 5,000 liters - Open tank - Low tank | model STORK TGSW - Filter | model PSF JB | 2017 - Grinder | model OOEHLER OL 6000 | 2016 Hedpfotzg H Dsx Akisw - Silo and feeder - Resistance tank | model PROMINOX | 2016 | 3,000 liters - 2x Brewing/mashing tank | model PROMINOX | vertical | 2016 | 3,265 liters - Filter tank | model PROMINOX | 2016 | 4,500 liters - 2x Pump | model MIM GRUP FL31Cl - Pump | model CALPEDA MXH 204/A - Industrial scale | model GRAM MISSIL F2-60 - Pump | model LOWARA HTB 32-125/30 - Pump | model ABB INOX MIM GRUO FLUID-102 - Industrial sink - Refrigeration chamber - Pump | model PYD SH2-40 - Osmosis system | model HIDROTEC - Water treatment system - Cooling system | model AIRWELL AQVH,125BLN,R410A,BFC,1P | 2010 - Compressor | model INGERSOLL-RAND 11BAR | 2001 - Boiler | model ATTSU RL-400/12 - Forklift | model NICHIYU FB18PN-55-450 PS PL | 1999

Condition: used, Steam-heated 4-vessel brewhouse with stainless steel brewing vessels. The system is suitable for infusion and decoction methods as well as high-gravity brewing and comprises the following components: - Mash tun (Huppmann, 2004) with a capacity of 150 hl, steam-heated, insulated, with a bottom-entry agitator and pre-mash screen - Lauter tun (Huppmann, 2004), insulated, with a drop floor, grist cutter and spent grain discharge screw - First run-off vessel for wort (Steinecker, 2003), insulated tank - Wort kettle (Steinecker ‘Merlin’, 2003), steam-heated, insulated - Wort condenser - Whirlpool, insulated, with hop dosing vessel (manual flap) and top-entry spent grain discharge - Spent grain tank with a capacity of 15 hl, conical - Hop dosing unit with 3 stainless steel vessels and hop chutes on a shared stainless steel frame - Wort cooler (API, 2006), two-stage plate heat exchanger for cooling 180 hl/h of hot wort to fermentation temperature - 3 centrifugal pumps for wort transfer - Various pipework, valves, fittings and sensors Additional title: Brewing system with steam-heated stainless steel vessels; built between 2003 and Cast wort capacity up to: 18000 l ; 15,500–16,000 litres for full beer, 12,000 for bock beer Malt bill: 2500 kg/batch Operation / Control: Simatic S7-400 Material: Stainless steel Hodpfx Akozizb Sjiew Features: Mash tun; lauter tun; wort transfer tank; hop dosing; wort kettle (Merlin); whirlpool; spent grain tank; wort cooling; 3 x wort pumps

Condition: used, This listing is for 1 of 6 Parker SciLog SciPres Pressure Monitor with Pressure Sensors The unit is in full working condition and is ready for immediate release. This Unit is Supplied with Scilog Scipress pressure sensorsand cables. The Parker SciLog SciPres Pressure Monitor is an advanced monitoring solution tailored for biopharmaceutical applications. Designed to work seamlessly with single-use pressure sensors, this device enables real-time pressure monitoring and comprehensive data documentation, ensuring your processes run smoothly and efficiently. Key Features: Hsdpsxxx Tqjfx Akiow - Pre-Calibrated Sensors: The SciPres pressure sensors are pre-calibrated for immediate use upon installation, eliminating setup time and ensuring accurate readings right out of the box. - Gamma-Stable Technology: Engineered to withstand gamma radiation sterilization, these sensors are perfect for environments requiring stringent sterilization protocols. - Robust Data Storage: Each sensor is equipped with a dedicated chip that stores crucial calibration and sensor-specific information, supporting traceability and data integrity. - Versatile Size Options: Available in five sizes to accommodate various tubing configurations, including Luer, 3/8" barb, 1/2" barb, 3/4" Tri-Clover, and 1" Tri-Clover Ladish, ensuring compatibility with your existing systems. - Real-Time Monitoring: The SciPres pressure monitor supports up to three pressure sensor inputs simultaneously, displaying transmembrane pressure (TMP) and differential pressure (dP) for comprehensive monitoring. - Max Pressure Watchdog: This safety feature records the maximum pressure detected, along with sensor ID and calibration info, providing critical data for overpressure prevention. - Software Integration: Connect the monitor to a PC using SciDoc software for automated real-time documentation of sensor data, enhancing data management and compliance. - Comprehensive Support: Enjoy extensive customer support to assist with any issues or queries you may encounter. Applications: - Ideal for critical biopharmaceutical processes such as filtration, chromatography, reverse osmosis, fermentation, and use with bags and manifolds. The SciLog SciPres Pressure Monitor is your reliable partner for precise pressure management in a variety of settings. Specifications: - Display: Backlit, user-friendly interface - Outputs: Analog and digital signals - Power Supply: Universal wall adapter included - Calibration Points: Supports multiple calibration configurations

Condition: used, water tank capacity: 30,250 l, Upright stainless steel container made of V2A, wine/fruit juice tank with 3 cooling plates, partly with digital temperature measurement - used - Volume approx. 30,250 liters Diameter approx. 2,500 mm Cylindrical Height approx. 5,600 mm Total height approx. 7,200 mm Outer surface: marbled Inner surface: 2B=IIIC ground Top end: Torispherical head 2 crane eyes Threaded weld-on socket DN 100 centrally connected to DN 40 with threaded socket DN 50 with fermentation lock valve DN 50 with check valve DN 50 Sprinkling ring Tank cylinder: Level indicator with bar and scale and standpipe valve DN 15 Manhole 420x320 mm Test tap DN 15 Ladder hook at top Immersion stem sleeve for temperature display Downwardly drawn CIP line with vent line DN 40 with connecting thread DN 50 Clear drain with angled seat valve DN 50 Cooling line CIP ball Bottom end: Torispherical head to Front-drawn floor sill with DN 50 angled seat valve and DN 50 outlet pipe with flange 4 spherical feet, height-adjustable, with washers Available quantity: 24 Hedpfx Aowlg E Rekijw Otherwise, see photos

Condition: good (used), Nova BioProfile Flex Automated Cell Culture Analyzer BioProfile is an automated cell culture analyzer that measures up to 15 key cell culture attributes. By combining up to five separate instruments into one user-friendly instrument, BioProfile FLEX simplifies workflow and saves time, labor, and operating costs compared to multiple instruments. The FLEX autosampler collects samples from its two fermenters and transmits them to the FLEX analyzer's measurement unit. The data obtained by the FLEX autosampler was compared with data manually collected from the reactor, and statistical analysis was performed. Specifications Sample analysis time: 2.5 minutes (gases only – PO2 + PCO2), 4.0 minutes (chemistry/gas and osmolality), 6.25 minutes (all 15 tests), Operating temperature range: 15–30°C (59–86°F), Relative operating humidity range: 20–85% Sample size: 1 mL (for all modules) Sampling options: Single via syringe/beaker Automated batch with 20-position sample tray Online, automated from up to ten bioreactors Electrical requirements: 90–264 VAC, 50 to 60 Hz (universal power supply) System size: Height: 20 in (50 cm) Width: 26 in (66 cm) Depth: 20 in (50 cm) System weight: Analyzer: 94 lbs (42.6 kg) without Reagents Modular test menu options Chemistry/Gases Cell Density/Viability Osmolality IgG System integration options Online autosampler Hedpfeq Tp Tdox Akiew Sample collection system OPC connectivity Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2006, functionality: fully functional, Modular and scalable design Probable working width 600 mm Electrical supply 400 V Rated current 16 A Frequency 50 Hz – to be confirmed Output up to 7,500 pieces/hour Programmable control with touchscreen 50 memorizable programs Rex head according to configuration Weight range 35 to 85 g with Basic Rex Weight range 50 to 110 g with Basic Rex Pre-lamination before fermentation Resting pre-fermenter Optional pre-fermenter air conditioning Interchangeable stamping station Optional longitudinal cutting station RR forming station according to configuration WK-RR forming station according to configuration Hsdpfx Aozp H Epokijw Seeding unit according to configuration Automatic depositing onto trays or belts Drive power 3.5 to 5.3 kW Fermenter air conditioning 4.4 kW Fermenter water 15 l/h maximum at 2 bar Seeding water 40 l/h at 2 bar Maximum height approximately 2,640 mm Used industrial line for rolls – König Combi Line The used König Combi Line is a modular line designed to automate the dividing, rounding, resting, shaping, and depositing of rolls. Its scalable design allows different modules to be combined according to the desired products, required output, and organization of the bakery. The nameplate identifies this equipment as a Combi Line manufactured by König Maschinen Kft. The visible machine number is 06.6.0070. The beginning of the configuration code appears to correspond to a 600 mm width version, but the complete composition of the line must be confirmed by an inventory of the modules present. Why this line stands out The Combi Line is based on a modular architecture, allowing the production of numerous formats from a single installation. Depending on its configuration, it can integrate a Rex dividing-rounding head, pre-lamination, a pre-fermenter, a stamping station, a forming station, a seeding unit, and an automatic depositing unit. This modularity facilitates the adaptation of the line to changes in production. Additional equipment can be added later without replacing the entire installation. Key advantages Modular and scalable design Automated production of many types of rolls Output of up to 9,000 pieces per hour Gentle dough handling with Rex heads Memorizable settings for different productions Quick tool changes for stamping Automatic depositing onto trays, belts, or boards Wide choice of shaping and finishing modules Seed recovery, limiting waste Easy access for cleaning and maintenance Products achievable depending on the configuration The Combi Line range allows the production of round, oval, flattened, laminated, stamped, cut, rolled, or seeded dough pieces. It is particularly suitable for hamburger buns, hot dog buns, milk bread rolls, Kaiser rolls, Kornspitz, decorated rolls, donuts, bocadillos, and long products such as half-baguettes. It can process wheat doughs, mixed doughs, cereal doughs, and various leavened doughs, provided they are compatible with the dividing head and installed tools.

Condition: used, Year of construction: 2023, Overview This Braumanufaktur Werk II Fillmaster R18 is a compact isobaric rinsing, filling and crown-capping monoblock for glass bottles, built in 2023 by Braumanufaktur Werk II (Großalmerode, Germany). It is sold as a complete craft-scale bottling set for carbonated beverages together with a 750 L fermentation and carbonation tank (SM Inox, 2021) and a 330 L pressure loading tank (SM Inox, 2023). The monoblock combines 6 rinsing stations, 6 isobaric filling valves and 6 crown-capping heads in a single compact unit. CO₂ pre-saturation of the bottles before filling reduces oxygen pickup and product oxidation. Mechanical movements are driven by a pneumatic system (6 - 8 bar); filling parameters, production data and bottle counters are managed via the Siemens SIMATIC HMI touch panel. The line is still installed and under power, and basic functionality can be demonstrated on site. Technical data - Manufacturer: Braumanufaktur Werk II GmbH (Großalmerode, Germany) - Model: Fillmaster R18 - Year of manufacture: 2023 - Machine type: isobaric rinser - filler - crown capper monoblock, glass bottles - Rinsing stations: 6 / filling valves: 6 / capping heads: 6 - Capacity: approx. 500 - 650 bph (semi-automatic, operator-dependent) - Filling system: isobaric, with CO₂ cylinder connection for bottle pre-saturation - Bottle formats: currently set up for 0.375 L glass; adaptable to other crown-cap formats - Crown caps: 26 or 29 mm, all sizes configurable - Control: Siemens SIMATIC HMI touch panel (filling parameters, production data, bottle counter) - Compressed air: 6 - 8 bar - Power: 230 V, 5 A - Dimensions: approx. 870 x 930 x H 1,910 mm Equipment - SM Inox FBTB 750 L PED fermentation and carbonation tank (2021): domed bottom, pressure lid, double insulated jacket with glycol circuit fed by an external heat pump, dedicated control panel for temperature, agitator and CO₂ injection (automatic / manual), carbonation stone fed via solenoid valve; PED Cat. III, approx. Ø 955 mm - SM Inox FCTC 330 L loading tank (2023): pressure lid with CO₂ inlet for pump-free liquid transfer between tanks, approx. Ø 640 mm - Mobile transfer / washing pump on stainless trolley - OEM technical documentation (operating manual, PLC instructions, quick guide) and declarations of conformity Hodpeziuazefx Akijw Condition Used - very good condition with light use: the PLC production counter reads approx. 58,600 bottles / 12,000 litres in total. Still installed and under power; the sale takes place because the owner has discontinued production. Availability Immediately. Location: Italy. Preparation, dismantling and truck loading by the seller (EXW loaded). The machine can be visited and demonstrated on request.

Condition: used, Year of construction: 2017, machine/vehicle number: LC560, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line. Hsdpfx Akew Ahg Reiow Laboratory and Accessories Alongside processing units, the Used Processing Line for Small Dairy Products 2000 L/h features a dedicated laboratory. Specifically, it houses analytical tools for quality control and milk analysis. Additionally, the line includes 300 plastic crates for storing and transporting yogurt cups. System Shutdown and Storage Finally, operators shut down the line in September 2023. Before dismantling, they cleaned ...

Condition: used, This item is unused and in the original packaging We have a quantity available The InPro 3253SG 120/PT1000 is an in-line industrial pH electrode (probe) intended for continuous process measurement rather than simple lab spot checks. It integrates both the pH sensing element and temperature compensation in a single unit, allowing accurate, real-time pH measurement in process lines, tanks, fermenters and reactors Physical & Mechanical - Sensor shaft length: ~120 mm — relatively short, good for installations with limited insertion depth. - Process connection: Pg 13.5 threaded connection. - Connector type: VP industrial connector for secure integration. - Pressure rating: Up to ~4 bar gauge. Hjdpfsy Iw Etjx Akisw Temperature & Compensation - Built-in PT1000 temperature sensor — provides temperature compensation for accurate pH reading. - Operating range: ~0 °C to ~100 °C. Sensing & Reference System - Glass pH sensing membrane with a pre-pressurized liquid electrolyte system — lowers maintenance and improves stability. - Ceramic diaphragm — stable reference junction. - Argenthal silver-ion trap cartridge — improves reference performance, especially in environments containing sulfides. - Sterilisation & Hygiene - Sterilisable/autoclavable — built to withstand repeated steam sterilization or autoclave cycles without losing calibration or performance. Certifications & Approvals - Typically supplied with industrial and safety certifications (e.g., ATEX, IECEx and CE) for use in hazardous zones and hygienic processing. pH Range - Suitable for pH measurement typically within 0 to 12 (depending on membrane type). Summary In essence, the Mettler Toledo InPro 3253/120/PT1000 is a high-performance industrial pH electrode designed for robust, low-maintenance in-line monitoring with integrated temperature compensation, suitable for sterilizable and process‐critical environments. Its pre-pressurized reference and rugged build help deliver stable pH measurements in demanding applications.

Condition: excellent (used), functionality: fully functional, warranty duration: 3 months, usable tank capacity: 100 l, cooling capacity: 4 kW (5.44 HP), input voltage: 400 V, tank capacity: 100 l, total width: 640 mm, total length: 700 mm, total height: 1,250 mm, input frequency: 50 Hz, DGUV certified until: 09/2027, type of input current: three-phase, Sourdough – Quick – Fermenter Model: Hema BRSSF 100 with external LED control approx. 20 – 100 kg total rye flour with timer Stainless steel design Hjdpovdkt Rjfx Akiew Connection: 400V, 16A-CEE plug Dimensions: 640 x 700 x 1250 mm Used machine, cleaned with warranty + spare parts service Optional: Delivery service Maintenance contract Service package Instruction and commissioning Many other bakery machines in stock!

Condition: new, -Dimensions (A x B x C): 1610 x 1272 x 1392 mm -Max. dough piece weight: 700 g -Number of compartments: 31 -Part No.: 7309535 -Ball capacity per compartment: 8 -Total ball capacity: 248 -Power: 0.37 kW -Voltage: 400 V -Frequency: 50 Hz - 1.06 A -Weight: 380 kg The RP manual intermediate prover is a resting chamber for dough, loaded and unloaded manually, which allows the dough to relax for the necessary time after dividing and before final shaping. During resting time in the RP manual chamber, the dough balls ferment gently and gain some volume, which enables them to become more supple and easier to shape. This chamber is specially designed for artisan bakers who want to optimally preserve their dough’s quality. Standard baskets can hold pieces up to 650 g. Optional germicidal treatment available for enhanced hygiene. DURABILITY: -Painted steel frame provides great rigidity to the chamber. An oversized chain is used for the 'large wheel' of the proving nests to extend the service life of the chamber. -Smooth gear operation ensures extremely quiet machine performance. VERSATILITY: -Equipped with electrical sockets for a moulder and divider, allowing for integrated workflows. -Manual left/right control button available, with a highly ergonomic hands-free control option. HYGIENE: -Proving nests made from polyester to prevent moisture buildup. Iedcvyqoxv R Rcsi Aobd Hedpfjxv R Rcjx Akijw -Optional integration of a germicidal lamp. The listing was translated automatically. Translation errors are possible.

Year of construction: 2026, condition: new, functionality: fully functional, Liquid fertilizer / AHL / ASL - Tank, container, storage tank 100,000 liters capacity - factory new - above ground, made of steel sheet. Hsdpfxji A Hxve Akiew The container complies with DIN-EN 12285-2 (formerly DIN 6616-D), has 2 saddle supports, an access ladder, and is primed on the outside - on untreated sheets. D = 2.90 m - L = approx. 16.00 m. The container will receive a factory-new plastic inner liner, including a leak detection device mounted in a protective box - see sample photo. The plastic inner liner has a "general building authority approval" and is therefore suitable and approved for the storage of liquid fertilizer AHL as well as NOx reduction agent AUS 32 (AdBlue). The price is ex works - free loading. (Delivery can be offered at a low cost for an additional charge.) We recommend: Sandblasting the above container on the outside, priming it, and completely repainting it - traffic gray / RAL color. (Other RAL colors are also possible upon request!) ASL (ammonium sulfate solution) is a popular liquid fertilizer that is produced in drying plants during the drying of liquid fermentation residues and in exhaust gas purification. ASL containers require a plastic inner liner due to the corrosive properties of the stored medium. Important: The tank shown (sample photo) is a revised 100,000-liter tank that has already been delivered to a customer. The plastic pipelines (PVC connection) are not included in the scope of delivery and can be purchased for an extra charge. In general: You will receive an invoice with VAT shown. The purchase is made according to our general terms and conditions. Other tank systems (new and used) as well as rental systems are also available! In addition, we purchase existing tank systems and can, with certified specialist company qualifications according to WHG (Water Resources Act), professionally empty, clean, dismantle, and transport them. ===== If you have any questions, please contact: ===== Alfred Schneider GmbH & Co. Tankbau KG Mr. Heß / Mr. Jakob Tiefenrod 2 34320 Söhrewald near Kassel / Hesse =====

Year of construction: 1999, condition: used, Ice water generator for cooling supply of wort cooler (2nd stage), fermentation cellar (= 100 hl capacity), storage cellar (= 320 hl capacity) and pressure tanks (= 260 hl capacity) in a microbrewery with 20 hl output. Additional title: ice water generator Cooling capacitry: 14 kW Power: 6,2 kW Length: 1600 mm Width: 1600 mm Hjdpfxoxwy Sfj Akiow Height: 1800 mm Position: free standing Base construction: cylindrical tank with refrigeration unit on top, on square tube frame with domes Features: insulated stainless steel tank with side cover, semi-hermetic reciprocating piston compressor, copper tube coil exchanger, control box, cooling water pump

Condition: used, This listing is for the Broadley James Flow Controller S/601. The unit is in full working condition and ready for immediate use. This precision gas flow controller is designed for demanding bioprocessing environments. It features a clear digital interface for accurate monitoring and control of flow rates, ensuring optimal conditions for cell culture and fermentation. Robust and dependable, it integrates seamlessly into existing laboratory workflows Hedpfx Akeyw Iwfeiow

Condition: used, Professional bakery oven Miwe with fermentation chamber is an ideal solution for simultaneous baking and dough proofing under controlled conditions. This unit ensures optimal baking results thanks to even heat distribution and precise process control. The fermentation chamber provides ideal conditions for dough rising, resulting in improved product quality, texture and volume. The oven is suitable for preparing various bakery products such as bread, pastries and other dough-based items. Robust construction and professional build guarantee reliable operation, long service life and easy maintenance, making this oven an excellent choice for daily use. Technical specifications: Manufacturer: Miwe Machine type: Bakery oven with fermentation chamber Hedpfx Aoy Nap Dokijw External dimensions: 90 x 83 x 210 cm Internal dimensions: 60 x 40 cm Capacity: 8 trays (60 x 40 cm) Power: 14 kW Voltage: 400 V / 50 Hz / 3 N PE

Year of construction: 2025, condition: new, The IPW 100 tank pasteurizer is ideal for pasteurizing packaged fruit preparations (such as jams and preserves), fermented products (such as vinegar and beer), and pickled fruits and vegetables. The packaging must be heat-resistant, for example, made of glass or a heat-resistant plastic bag. The exact temperature and duration of the heat treatment depend on the specific product. It is operated manually. The tank is not insulated. • Very user-friendly • Includes baskets for bottles and jars • Automatic temperature control • Made entirely of stainless steel (WNr. 1.4301) Technical information Capacity: 100 L/h Power requirement: 9 kW, 400 V, 16 A Material: WNr. 1.4301, AISI 304 stainless steel IP65 electrical control box Thermometers: 1 pc. Hsdpfxov Srabe Akijw Dimensions: Length: 1170 mm Width: 530 mm Height: 870 mm Weight: 75 kg