Used Pasteurizer for sale (183)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, PASTEURIZER machine for sale. Manufacturer: Tomo Varga d.o.o. Pjdpfjwp E Hnox Aicjgr Year of manufacture: 2016. The machine is in working condition and ready for operation after reassembly. Detailed information about the machine: The pasteurization chamber reaches an operating temperature of 85 to 100°C. Batch filling in carts 850x900x1350 mm, which can be carried into the chamber with a forklift and stacked on top of each other. Pasteurization is done with direct steam. The flow of steam inside the chamber is directed by a 5 KW fan. Regulation of temperature and pasteurization time from 60 to 100°C. Wall and door insulation 150 mm thick. The chamber is made of stainless-steel sheet AIS I304. Capacity 1056 polypropylene bottles of 1.5 l. The dimension of the whole machine is 270 x 300 cm It also has a smaller electrical cabinet but that can stand separate (see picture called external electric cabinet) Included with the device: 4X carts for inserting products into the chamber and an electrical cabinet with control panel (Touch screen) The device is disassembled for transport and can be viewed in this condition at the following location: Posavska ulica 59, 10372 Oborovo (Glazir d.o.o.). Working hours: Monday - Friday (from 08:00 to 14:00). For additional information, please contact via phone number listed or email for company GLAZIR d.o.o.

Condition: used, Year of construction: 2013, Overview This KHS Innopro KZE 72 is a flash pasteurizer (short-time heating system) for beer, cider and other carbonated beverages, built in 2013 by KHS GmbH (Dortmund, Germany). Working with a plate heat exchanger, it gently pasteurizes at a nominal capacity of 72 hl/h and is designed for a product flow between 24 and 72 hl/h with a maximum CO₂ content of 6.5 g/l. The system comes complete with its 50.8 hl buffer tank and the control cabinet with touchscreen HMI. The unit comes out of a large brewery, is still installed and can be visited on request. Technical data - Manufacturer: KHS GmbH (Dortmund, Germany) - Model: Innopro KZE 72/T4-72-12/PT45A - Year of manufacture: 2013 - Machine type: flash pasteurizer with plate heat exchanger - Nominal capacity: 72 hl/h - Minimum adjustable capacity: 24 hl/h - Capacity during CIP cleaning: 85 hl/h - Maximum CO₂ content in the product: 6.5 g/l - Pasteurization temperature: 72 °C (beer) / 85 °C (cider) - Holding time: 30 s - Product inlet temperature: 4 °C; product outlet temperature: max. 4 °C Pedozvfbcopfx Aicjgr - Supply pressures: product 3.5 bar(g), steam 3 - 6 bar(g), coolant 1.5 - 2 bar(g), CIP 4 bar(g) - Electrical connection: 400 V, 50 Hz, 3-phase - Dimensions pasteurizer skid: approx. 4,600 x 3,500 x H 2,900 mm - Weight pasteurizer skid: approx. 3,100 kg (frame incl. plate heat exchanger) Equipment - Pasteurizer skid with plate heat exchanger type PT45A, pumps and valve manifold - Buffer tank: 50.8 hl gross / 45.5 hl working volume, inner Ø 1,600 mm, H 3,420 mm, approx. 1,120 kg, operating pressure up to 5 bar(g), CO₂ and sterile air connections 6 - 8 bar(g) - Control cabinet with touchscreen HMI - OEM technical documentation (operating manual) Condition Used - good working condition. The system was in production in a large brewery until recently, is still installed and can be inspected. Availability Immediately. Location: Netherlands. Dismantling and loading by arrangement.

Condition: used, Year of construction: 1996, Overview This KHS Innopas P II SG 30-200 is a tunnel pasteurizer for bottled beverages in glass bottles, built in 1996 by KHS (Klöckner Holstein Seitz, Germany). With a treatment area of 113.5 m² across 8 treatment zones (3 of them recuperative), it pasteurizes at approx. 24,000 - 25,000 bottles per hour depending on bottle format, at a maximum pasteurization temperature of 75 °C. For 0.7 l glass bottles the total treatment time is approx. 48.6 minutes (21.2 min heating, 12.3 min pasteurization, 15.0 min cooling) at approx. 5 pasteurization units. The main control is a Siemens SIMATIC S5 PLC; the pasteurization unit setting (temperature diagram) was later upgraded to a Siemens S7 with touch panel. Danfoss frequency drives are fitted. The machine ran at a German mineral water bottling plant until mid-2024 and is now completely dismantled and professionally stored, with the conveyor belt sections and components palletized - ready for immediate collection. Technical data - Manufacturer: KHS (Klöckner Holstein Seitz) - Model: Innopas P II SG 30-200 - Year of manufacture: 1996 - Machine type: tunnel pasteurizer - Capacity: approx. 24,000 - 25,000 bottles/hour (depending on bottle format) - Treatment area: 113.5 m² - Treatment zones: 8 (H1-H3, S, P, C1-C3 plus cooling tower zone), 3 recuperative - Max. pasteurization temperature: 75.0 °C (0.7 l) / 72.5 °C (0.33 l) - Inlet temperature: 15.0 °C; outlet temperature: approx. 32 - 38 °C depending on format - Total treatment time: approx. 48.6 min (0.7 l) / 77.1 min (0.33 l) - Pasteurization units: approx. 5 PE - Machine water content: approx. 14.4 m³ - Water consumption at nominal capacity: approx. 1.5 m³/h - Heat consumption at nominal capacity (0.7 l): approx. 3,672 MJ/h - Installed power: approx. 66.2 kW - Electrical connection: 400 V, 50 Hz - Dimensions (L x W x H): approx. 21,000 x 4,210 x 2,750 mm - Required entry opening: approx. 2.7 x 3.0 m - Net weight: approx. 27,500 kg - Noise level: ≤ 85 dB(A) according to ISO 3744 Equipment - Siemens SIMATIC S5 PLC (main control) - Pasteurization unit setting (temperature diagram) upgraded to Siemens S7 with touch panel - Danfoss frequency drives - Modular plastic conveyor belt with drainage openings, belt sections palletized - External pump assemblies and inspection windows - Electrical cabinets with main disconnect switch - Original KHS documentation (datasheets and drawings) Condition Used. The machine is completely dismantled and stored; belt sections, piping and components are palletized for transport. The machine can be visited on request. Psdozwxu Sepfx Aicegr Availability Immediately. Location: Germany. Loading by the seller is possible.

Year of construction: 2021, operating hours: 8 h, condition: like new (used), functionality: fully functional, Tunnel pasteurizer-cooler Tecninox T.P.N. 4x1.2-3P — as new For sale: professional tunnel pasteurizer-cooler, brand Tecninox (Felino, Parma), model T.P.N. 4x1.2-3P, serial number 317/21, year of manufacture 2021. The machine has only been used once for testing and has never been put into production. It is in excellent condition and comes complete with the original operation and maintenance manual. Key features: - Useful length 4,000 mm, width 1,200 mm - Structure in AISI 304 stainless steel - Polypropylene conveyor belt driven by inverter - 3 Lowara pumps for water circulation - Steam heating with coil and automatic condensate discharge - Multi-stage cooling with spray water - PIXSYS electronic temperature control - Data recorder with USB output (CSV files) - AISI 304 electrical panel with Danfoss inverter - Power supply 380V/50Hz — Installed power 5.5 kW - Steam consumption 200 kg/h at 3-4 bar - Adjustable cycle time from 55 to 240 minutes If you have any questions or require further information, please do not hesitate to send us a message or call us. Pgsdpfx Aioywuzwocor

Year of construction: 2018, condition: good (used), functionality: fully functional, For sale is a high-quality and compact pasteurization unit (HTST) from the specialist fruittech, built in 2018. This system is ideal for medium-sized breweries or beverage producers seeking a reliable solution for thermal preservation. The entire unit is mounted on a sturdy stainless steel base frame (skid), making it plug-and-play: it is easy to transport, quick to install, and simple to integrate into existing processes. Podpfsy Hgt Dex Aicogr Key features: - Efficient heat transfer: The installed API Schmidt-Bretten SIGMA plate heat exchanger offers maximum thermal efficiency with minimal footprint. According to the nameplate, the system is designed for multiple beer zones, hot water, and cooling (ice water). - Hygienic design: Equipped with two high-performance CSF Inox stainless steel centrifugal pumps (each 5.5 kW), specifically developed for the food and beverage industry. - Modern controls: Operation is intuitive via a central touch display on the stainless steel control cabinet, enabling precise monitoring of the pasteurization units (PU). - Compact design: All piping, valves, and sensors are neatly arranged on the frame. The unit is professionally manufactured and is in excellent visual condition.

Condition: used, Year of construction: 2019, Pasteuriser Profi PA SH: Capacity: 600 l/h 48 kW heated with gas Automatic temperature controller Stainless steel tank, V4A Dimensions: 2,100 x 880 x 1,300 mm Bag-In-Box dosing unit Profi: Capacity: 600 l/h including weighing unit with automatic stop when the specified filling quantity or weight is reached. Bags with up to 10 litres Pgjdpfeztyyuex Aicer Additional title: bag-in-box filling Capacity: 600 l/h Max. bag volume: 10 l Power: 48 kW Material: vessel from V4A stainless steel Features: gas burner, automatic temperature controller, weighing unit with automatic stop

Condition: used, Year of construction: 2025, OVERVIEW This Hermis TP-HRW 20 stainless steel tunnel pasteurizer is a new and unused machine, manufactured in 2025, designed for the pasteurization of beer in 500 ml bottles. The pasteurizer has a capacity of approx. 20,000 bottles per hour and is configured as a 10-zone tunnel pasteurizer with heating, pasteurization and cooling sections. Psdpfoy Ul Dwjx Aicegr The machine is fully made of stainless steel AISI 304 and is equipped with an external plate heat exchanger for the heating system. The process is controlled by a Siemens S7-1200 PLC with a Siemens Simatic 12" HMI touch panel, allowing automatic control of the pasteurization process. The system is designed for a product inlet temperature of approx. +4°C, a pasteurization temperature of approx. +62°C to +64°C, and an outlet temperature of approx. +34°C to +35°C. The pasteurizer provides a total treatment area of approx. 74 m², with a treatment length of approx. 13.5 m and a total machine length of approx. 15.3 m. The complete process cycle is approx. 45 minutes, achieving approx. 24 PU based on the given 500 ml beer bottle configuration. TECHNICAL DATA - Manufacturer: Hermis - Model: TP-HRW 20 - Machine Type: Stainless steel tunnel pasteurizer - Condition: New, never used - Year of Manufacture: 2025 - Product: Beer - Container Format: 500 ml bottles - Capacity: approx. 20,000 bottles/hour - Treatment Area: approx. 74 m² - Number of Modules: 7 pcs - Total Number of Zones: 10 zones - Zone Configuration: heating, pasteurization and cooling zones - Treatment Length: approx. 13,500 mm - Dimensions: approx. 15,300 x 5,900 x 2,200 mm - Total Length incl. infeed / discharge conveyor: approx. 15,000 mm - Main Construction: Stainless steel AISI 304 - Heating System: Plate heat exchanger outside the pasteurizer - Steam Pressure: approx. 3 bar - Pasteurization Temperature: approx. +62°C to +64°C - Product Inlet Temperature: approx. +4°C - Product Outlet Temperature: approx. +34°C to +35°C - Pasteurization Time: approx. 10–11 minutes - Total Cycle Time: approx. 45 minutes - Pasteurization Units: approx. 24 PU - Water Consumption: approx. 2.2 – 3.0 m³/h during stable operation - Water Volume in Pasteurizer: approx. 6,600 l - Steam Consumption: approx. 790 kg/h during stable operation; approx. 1,250 kg / 30 min during start-up - Steam Temperature: approx. +143°C at 4 bar - Power Supply: 400 V AC, 3/N/PE, 50 Hz - Control System: Siemens S7-1200 - HMI: Siemens Simatic 12" touch panel - Main Conveyor: Plastic conveyor by Movex - Active Transfer: Rexnord - Plate Heat Exchanger: Funke - Pumps: Stainless steel pumps by Lowara - Spray Nozzles: Lechler - Steam Valve: Bürkert - Air Supply System: SMC - Level Sensors: Endress+Hauser / Negele - Temperature Registration: Endress+Hauser - Temperature Sensors: Negele - Included Features: Automatic pasteurization control, ECO graph / data logger, stainless steel electrical cabinet, air conditioner for electrical cabinet

Condition: used, machine/vehicle number: PST37, Used pasteurizer for tomato juice 400 CPMTechnical Specifications & Performance DataThis BOND four-module tunnel pasteurizer-cooler is designed for the thermal treatment and controlled cooling of tomato juice containers. Built primarily in stainless steel, the machine combines pasteurization and cooling stages on a continuous Intralox plastic mesh conveyor, providing a robust solution for industrial packaging and beverage production applications requiring extended thermal processing.Maximum production speed: For tomato juice 400 containers per minute (24.000 unit per hour) for beer 600 container per minut (36.000 unit per hour).Alternative operating condition: 300 containers per minute ( overhauled, in excellent condition )Thermal length: 27,400 mmUsable width: 3,200 mmUseful processing area: 80 m²Total internal capacity: 22,000 piecesProduct weight used for the thermal calculation: 450 gContainer format indicated: 2.0LAdvanced Automation & Control SystemsThe pasteurizer is supplied with an electrical control panel for management of the thermal treatment and conveyor process. Water tanks, recirculation pumps, heat-exchange equipment and the continuous conveyor are integrated into a coordinated operating system. The design includes recirculating-water circuits serving the pasteurization and cooling sections.Thermal performance data indicate pasteurization water at 95°C, with a cooling-tower temperature difference of 10°C. The documented recirculating-water volume is 80 m³/h, with additional pump references of 65 m³/h and 165 m³/h.Production Line Integration CapabilitiesThis tunnel pasteurizer is suitable for installation in a used bottling line or industrial packaging line where filled containers require pasteurization before downstream handling, labeling or secondary packaging. Its continuous mesh conveyor configuration supports inline product flow between upstream filling equipment and downstream cooling, inspection or packaging machinery.The machine was originally engineered for tomato juice, a product requiring longer pasteurization times and higher pasteurization temperatures than beer. The system can therefore be evaluated for beverage production and food-processing applications with comparable thermal-treatment requirements. The cooling section includes a 20 m² buffer conveyor to support controlled product discharge and line balancing.Machine Condition & Maintenance HistoryPresented as like new and fully operational, the machine is complete with the accessories required for operation. The all-stainless-steel construction supports durability and hygiene in demanding production environments, while the Intralox mesh belt provides continuous container transport through the thermal and cooling zones.Operational Performance & VersatilityAt 400 containers per minute, the maximum documented thermal cycle lasts 55 minutes. Pasteurization represents 25% of the cycle, with 14 minutes at 95°C water temperature, followed by 41 minutes of cooling using cooling-tower water. At 300 containers per minute, a revised 60-minute cycle is indic... Psdpfxezvl S Ie Aicegr

Condition: excellent (used), functionality: fully functional, Alfa Laval / Tetra Pak Cream Pasteurization Line Alfa Laval / Tetra Pak Cream Pasteurization Line | Piston Pump, Buffer Tank, Flowmeter, Pasteurizer Complete cream pasteurization line from renowned manufacturers Alfa Laval and Tetra Pak, equipped with high-quality pumps, valves, flowmeters, and control cabinets. The line is designed for hygienic and efficient cream pasteurization in the dairy industry. Capacity: 35,000 liters/hour Main components of the line: 1. Circumferential Piston Pump Manufacturer: Alfa Laval Type: DURACIRC 73 Serial Number: E256143 Year of Manufacture: 2021 Dimensions: 1600 × 600 × 800 mm Included: various valves and stainless steel filter housing 2. Stainless Steel Buffer Tank Tank dimensions: Ø 1100 × 1700 mm Total dimensions: Ø 1200 × 2900 mm 3. Alfa Laval Valves, Type: Unique SSV (6 pcs.) High-quality single seat valves for food applications 4. Flowmeter Manufacturer: Endress + Hauser Model: Promag P / Promag P Dimensions: 200 × 200 × 350 mm High-precision flow measurement for food-grade liquids 5. Centrifugal Pump Manufacturer: LKM Type: LKH 20/155 Power: 5.5 kW Production Number: 20-02319 Dimensions: 700 × 380 × 400 mm Stainless steel construction, suitable for CIP operation 6. Valve Manufacturer: Armaturen AG Type: MA9.31A6 5S Po Dimensions: 600 × 400 × 400 mm 7. Cream Pasteurizer Manufacturer: Alfa Laval / Tetra Pak Type: C10-SH Serial Number: 30104-38526 Year of Manufacture: 2003 Capacity: 1311 liters Operating parameters: Operating pressure (PS): 0 / 20.0 bar Test pressure (PT): 28.6 bar Temperature range (TS): 0 / 130 °C Dimensions: 5000 × 800 × 2200 mm High-efficiency heat exchanger system ensuring stable pasteurization 8. Centrifugal Pump Manufacturer: Pomac Type: CP29068/230 X 15 Serial Number: 22 818 Year of Manufacture: 12/2011 Capacity: 45 m³/h Power: 15.0 kW Dimensions: 950 × 400 × 500 mm 9. Nocado Valves (5 pcs.) Process valves for food applications 10. Control Cabinets Manufacturer: Eldon and IPBE Dimensions: 400 × 230 × 770 mm 1000 × 300 × 1000 mm Pgodpjxtu Ugefx Aicer The Alfa Laval / Tetra Pak Cream Pasteurization Line is a complete industrial solution with a capacity of up to 35,000 l/h, designed for high hygiene, precise process parameter control, and maximum reliability. Ideal for dairies, cream and milk fat producers.

Condition: excellent (used), functionality: fully functional, Alfa Laval / Tetra Pak Buttermilk Pasteurization Line Complete buttermilk pasteurization line from renowned manufacturers Alfa Laval and Tetra Pak, equipped with a buffer tank, circulation pumps, process valves, flowmeter, and control cabinet. The system is designed for hygienic thermal processing of buttermilk in dairy plants. Capacity: 25,000 liters/hour Main components of the line: 1. Siersma Scheffers Stainless Steel Buffer Tank Serial number: Karnemelk Year of manufacture: 1995 Capacity: 1,000 liters Overall dimensions: Ø 1100 × 3000 mm Material: stainless steel (s/s) 2. APV Valves (4 units) High-quality process valves for food applications 3. Pomac Centrifugal Pump, type: CP19555 / 165 x 10 Serial number: 20080 Year of manufacture: 2007 Capacity: 30 m³/h Power: 5.5 kW Dimensions: 700 × 350 × 450 mm 4. Endress + Hauser Flowmeter, model: Promag H / Promag 300 Dimensions: 350 × 200 × 200 mm Provides precise measurement of liquid food products Pjdpfx Aisxtvftocogr 5. Samson Valve Dimensions: 560 × 300 × 300 mm Application: flow and pressure regulation in process systems 6. Alfa Laval / Tetra Pak Buttermilk Pasteurizer, type: C8-K8M Serial number: 30107-33855 Year of manufacture: 2012 Capacity: 559 liters Operating parameters: PS: 16.0 bar PT: 22.9 bar TS: 120 °C Dimensions: 3200 × 550 × 1850 mm High-performance heat exchanger system optimized for buttermilk processing 7. Hovap Centrifugal Pump, type: HP-5032/170 Serial number: 33740 Capacity: 35 m³/h Power: 7.5 kW Dimensions: 700 × 320 × 550 mm 8. IPBE Control Cabinet (s/s) Purpose: control and supervision of the buttermilk pasteurization line Dimensions: 620 × 230 × 770 mm The Alfa Laval / Tetra Pak buttermilk pasteurization line with a throughput of up to 25,000 l/h is a complete, integrated system for the thermal processing of dairy products. Use of components from Alfa Laval, Tetra Pak, Pomac, Hovap, Endress + Hauser, and APV ensures high reliability, durability, and process quality.

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, Cheese vat / Pasteuriser / Process tank 350 liters. Custom engineered for a German Goat Cheese Dairy Used - Untested - Please read The Vat: - Manufacturer: Edmund Erdmann (Germany) - Year: 2004 - Completely stainless steel 1.4301 / AISI 304 - Inside: polished / outside: Glass bead blasted - Diameter inside / outside: 100 cm / 117 cm Depth inside: 49 cm - Empty weight: 850 kg (according to manual) - Double jacket (no insulation) - Hot water circulation system with built-in heating elements (8 x 4,5 kW = 36 kW) - Volume: 350 liters - Butterfly valve, DN 65 - 2-part cover - Gate-Agitator (removable) mounted on a bridge. Can be raised with a lever (see photo';s). - Agitator motor: 0,37 kW / 20 RPM - Brand: KEB - in working condition (tested) - Circulation pump: Brand: Wilo - Several (safety) sensors (cover - butterfly valve) - Magnetic valves - Temperature sensor PT100 - Custom engineered / Very solid tank and construction. Control Cabinet - 2 thermostats - Temperature recorder - Several switches for: - Agitator - Heating - Incubation - Circulation pump - Magnetic valve - cooling water - Heating elements (on/off) Please take a look a the photo's A German user-manual is included. IMPORTANT: This machine is sold "Untested" - "as is" This machine came from a business closure and was already disassembled when purchased. Pedey N Dagepfx Aicsgr We have never assembled and tested this machine. It is very likely that several parts need to be replaced. The machine is sold as NOT Running. You will have extra costs. We did test the agitator motor and it runs. Price is based on the value of the jacketed tank. With some adjustments this tank can be heated with an external heating. The vat comes with a lot of cable. Some of these cables are damaged. The control cabinet used to be "built in" a wall. The vat comes with a manual and parts-list.

Year of construction: 2022, condition: ready for operation (used), An unused and still originally packaged continuous pasteurizer Pietribiasi Michelangelo Srl is available. Throughput capacity milk: 1500l/h, throughput capacity cream max. 40% fat: 750l/h, inlet temperature: 6°C, pasteurization at 68/74/88°C, outlet temperature: 6°C, capacity foreflow tank-balance tank: 100l. With centrifugal pump for product and cleaning, additional section and hot water group, plate heat exchanger with stable internal construction in AISI304, special heat exchanger plates Sondex Denmark in AISI316, surface area per plate: 0.08m², flow volume per plate: 0.21dm³, special gaskets made of nitrile snap-on without glue, hydraulic test pressure: 8.0bar, test temperature: 110°C, heat recovery: 85%, temperature profile 6-68/74/88-6/33/45°C - 4 sections, final heating outlet cheese/yogurt: 33/45°C, media: approx. 3000+3000l/h hot water 92°C, approx. 3000l/h cooling water 2°C, holding tube for 15s, design stainless steel AISI304, switching system for product to the foreflow tank by means of pneumatic changeover valve as soon as the heating temperature is approx. 2°C below the setpoint, 2x hot water generators for pasteurization and final heating, closed circuit, assembly for automatic water supply, automatic system for hot water supply, expansion vessel, pump, brazed plate heat exchanger. Documentation available. An inspection on site is possible. Podpjyln D Tjfx Aicsgr

Year of construction: 1996, condition: ready for operation (used), A complete liquid egg and egg product pasteurization plant by Südmo/KMA is available. Main processes: egg breaking, filtration, pasteurization, cooling, homogenization. 1) Sanovo Type 3000 egg breaking machine, year of manufacture: 1991. 2) Südmo/KMA K21-FS/4235 pasteurization plant, year of manufacture: 1996, medium: liquid egg, throughput: 1500l/h, temperature profile: 15°C/64°C/6°C, cooling medium: ice water, ice water temperature: 1°C, ice water demand: 7500l/h, heating medium: hot water, hot water temperature: 65°C, hot water demand: 5000l/h, heat recovery: 70%, holding time: 360s. 3) APV Gaulin homogenizer. 4) Terlet process tank, volume: 10m³. 5) Clivet WSAT-XIN 30.2 water chiller, year of manufacture: 2018, refrigerant: R-410A, refrigerant charge: 9kg. Including pumps, agitators, tanks and additional accessories. Documentation available. An on-site inspection is possible. Pgodpfx Aozidh Isicsr

Condition: used, Year of construction: 2020, HTST ARSOPI 500 Litres Pasteuriser built in 2020 by Dairy Machinery UK and Arsopi, This machine is self heated by heating element of 9kw , It is mounted on a stainless steel frame and comes with a control panel, balance tank, auto valves, product and water pump, 1" inlet and outlet pipes which also act as a CIP loop. The complete process is run automatecly with a divert valve to ensure pasteurisation temperatures and milk flow . The machine has hardly had any use and is in perfect condition. We can support this Pasteuriser in full starting from the controls all down to the gaskets of the PHE . Machines that Can Be added with on extra sale are the below : 1) SEPARATOR Specifications Manufacturer :Seital/SPX Model :SE05 Condition : Used Stock Number:834 Manufacture:Seital Capacity : 1200 L/h Cleaning : Manual Cleaning Tools : Included Manual Book : Included Base Frame : Included 2) HOMOGENISER Specifications Manufacturer : GEA Model: NS20002H Year : 2009 Condition : Used Psdpfsy Ry Hrjx Aicegr Serial Number : 7818 Stock Number 110613074 Capacity : 30 L/H on 600 Bar Capacity : 500 L/H on 200 Bar Working Pressure: 200 to 600 bar Max No. Stages: 2 condition : Very Good condition Available: Immediately SOLD AS A COMPLETE PACKAGE OR SEPARATE Volume capabilities (litres): 500 Balance Tank: Included PHE Temperatures: 4-45-55-65-72-4 Outlets: Separator and Homogeniser Outlets Divert Valve: Included Dimensions in cm : 160 x 80 x 200 Product Pump: Included Hot Water Pump: Included Comtrols: HMI Touch Screen CIP: Program included for self Clean in Place Specifications Manufacturer: Seital/SPX Model: SE05 Condition: Used Stock Number: 834 Manufacture: Seital Capacity: 1200 L/h Cleaning: Manual Cleaning Tools: Included Manual Book: Included Base Frame: Included Manufacturer: GEA Model Homogeniser: NS20002H Year: 2009 Serial Number: 7818 No. Stages: 2 Condition Homogensier: Very Good condition Available: Immediately

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 10038587, Pasteurizer PA500-RWT-Gas Used Subject to prior sale! Pgjdpotpcm Iofx Aicsr

Condition: used, Year of construction: 2004, machine/vehicle number: AT31, Used APV N35 Plate pasteurizer 10000LhTechnical Specifications & Performance DataThe APV Products N35 is a plate pasteurizer engineered for high-efficiency thermal treatment of liquid food and beverage products. Built in 2004, this second hand system offers a compact, hygienic solution for beverage production and industrial packaging processes where consistent heat transfer and reliable performance are essential. Previously operated on whey in a dairy environment, it is now dismantled and ready for integration into a used bottling line or processing plant.Manufacturer: APV ProductsModel: N35Year: 2004Type: Plate pasteurizer (plate heat exchanger design)Nominal capacity: 10,000 l/hHeat transfer surface: 56.35 m²Working pressure: 10.0 barPrevious application: Whey (dairy processing)Advanced Automation & Control SystemsThe N35 plate pasteurizer architecture supports modern automation strategies. Typical configurations include temperature control loops, flow regulation, and safety interlocks to maintain stable pasteurization temperatures and hold times. The system layout facilitates integration with common PLC/HMI platforms used in beverage production, enabling recipe control, trend logging, and alarm management. Operator-friendly interfaces allow fast start-up, monitoring, and shutdown routines, while sanitary design supports rigorous hygiene requirements.Production Line Integration CapabilitiesThis flash-style thermal unit fits upstream of filling and packaging operations across a wide range of process layouts. It can be paired with balance tanks, deaeration, homogenization, and inline filtration, and can feed fillers serving PET or glass bottling operations in a used bottling line. Its compact footprint makes it suitable for both standalone processing cells and fully integrated beverage production lines. Format changes are process-driven (flow/temperature parameters) rather than container-driven, enabling multi-product flexibility for water-based and dairy-derived liquids.Machine Condition & Maintenance HistoryThe unit was previously operating on whey in a dairy plant. It has been professionally dismantled and is ready for collection and installation at a new site. Its condition supports recommissioning after standard installation, utility connection, and validation procedures typical for second hand processing equipment.Operational Performance & VersatilityThe APV Products N35 plate pasteurizer provides efficient heat recovery and stable thermal profiles for continuous processing. The plate heat exchanger design is well-suited for clear and low-to-medium viscosity liquids found in beverage and dairy processing. It aligns with industrial packaging requirements where consistent microbiological stability, product quality, and throughput are priorities. The 10,000 l/h nominal capacity makes it a solid choice for mid-scale beverage production environments seeking reliable performance.Installation Requirements & Site PreparationSite readiness typically includes utilities for heating and cooling media, process water, and drain connection... Pgsdpfx Ajzndtboicjr

Condition: used, Year of construction: 2004, machine/vehicle number: PST35, Used APV N35 Plate pasteurizer 10000LhTechnical Specifications & Performance DataThe APV Products N35 is a plate pasteurizer engineered for high-efficiency thermal treatment of liquid food and beverage products. Built in 2004, this second hand system offers a compact, hygienic solution for beverage production and industrial packaging processes where consistent heat transfer and reliable performance are essential. Previously operated on whey in a dairy environment, it is now dismantled and ready for integration into a used bottling line or processing plant.Manufacturer: APV ProductsModel: N35Year: 2004Type: Plate pasteurizer (plate heat exchanger design)Nominal capacity: 10,000 l/hHeat transfer surface: 56.35 m²Working pressure: 10.0 barPrevious application: Whey (dairy processing)Advanced Automation & Control SystemsThe N35 plate pasteurizer architecture supports modern automation strategies. Typical configurations include temperature control loops, flow regulation, and safety interlocks to maintain stable pasteurization temperatures and hold times. The system layout facilitates integration with common PLC/HMI platforms used in beverage production, enabling recipe control, trend logging, and alarm management. Operator-friendly interfaces allow fast start-up, monitoring, and shutdown routines, while sanitary design supports rigorous hygiene requirements.Production Line Integration CapabilitiesThis flash-style thermal unit fits upstream of filling and packaging operations across a wide range of process layouts. It can be paired with balance tanks, deaeration, homogenization, and inline filtration, and can feed fillers serving PET or glass bottling operations in a used bottling line. Its compact footprint makes it suitable for both standalone processing cells and fully integrated beverage production lines. Format changes are process-driven (flow/temperature parameters) rather than container-driven, enabling multi-product flexibility for water-based and dairy-derived liquids.Machine Condition & Maintenance HistoryThe unit was previously operating on whey in a dairy plant. It has been professionally dismantled and is ready for collection and installation at a new site. Its condition supports recommissioning after standard installation, utility connection, and validation procedures typical for second hand processing equipment.Operational Performance & VersatilityThe APV Products N35 plate pasteurizer provides efficient heat recovery and stable thermal profiles for continuous processing. The plate heat exchanger design is well-suited for clear and low-to-medium viscosity liquids found in beverage and dairy processing. It aligns with industrial packaging requirements where consistent microbiological stability, product quality, and throughput are priorities. The 10,000 l/h nominal capacity makes it a solid choice for mid-scale beverage production environments seeking reliable performance.Installation Requirements & Site PreparationSite readiness typically includes utilities for heating and cooling media, process water, and drain connection... Psdpfx Aijznvdrecegr

Year of construction: 2020, operating hours: 10 h, condition: like new (used), functionality: fully functional, Automatic line for rinsing, filling, pasteurizing, drying and packaging of glass juice bottles consisting of following modules: 1. SEMI AUTOMATIC DEPALLETIZER (model: Depal 512 – mini) for unpacking glass bottles from pallets, 1 operator required to put the pallet into the machine and remove the cardboard that is inserted in between the glass bottle layers 2. UNIVERSAL RINSING MACHINE (model: IND-Wash 56 S2) for steam sanitizing and hot water rinsing of the bottles before filling 3. ROTARY FILLING MACHINE (model: IND-Dose 46 PO-12) for filling of the hot product into the glass cylinder shape bottles 4. CLOSING MACHINE FOR TWIST OFF CAPS (model: IND-Close 12E) for vacuum closing of the filled bottles using steam injection induced vacuum system 5. PASTEURIZATION AND COOLING TUNEL (model: PT 42-9) for further continuous pasteurization of the product 6. VACUUM TESTING MACHINE (model: IND-Test 61) for selection and eviction of the improperly closed bottles 7. DRYING MACHINE (model: IND-Blow 86) for drying the residual moisture on the battle surface before applying labels Pgjdpfxezdr Ile Aicsr 8. LINEAR LABELLING MACHINE FOR APPLICATION OF SELF-ADHESIVE LABELS (model: IND-Lab 32B) with top (over the cap) and side application of the labels on cylindrical bottles 9. AUTOMATIC GROUPING AND SHRINK-WRAPPING MACHINE WITH TRAY AND FILM (model: IND-pack 29 T) for packing the bottles onto cardboard trays in various configurations per different bottle sizes 10. SET OF FLAT TOP CHAIN CONVEYORS (model: IND-Trans 71) connecting the various modules of the line (conveyors between rinsing, filling and closing sections with top covers)

Condition: used, Year of construction: 2004, operating hours: 2,000 h, machine/vehicle number: PST17, Used Pasteurizer brand PG Completely Overhauled Used Pasteurizer Completely Overhauled for jars or cans in d.b. PG brand, all stainless steel with squared stainless steel mesh, complete with 4 water recycling tanks with relative pumps. Pasteurizer equipment for sale with inlet and outlet belt, blower for drying jars or boxes at the outlet, steam modulating group, shell and tube heat exchanger, various pipes connections, and all its accessories for operation. The pasteurizer equipment for sale is totally overhauled Pasteurizer equipment is made up of two sectors of 9500 mm each Overall dimensions of the Used Pasteurizer PG: Total length 19.00 m Useful belt length axis by axis: 18.60 ms Useful net width 2.50 m. Overall width 2.70 m machine body Overall width including trays 3.30 m Total useful area of the Used Pasteurizer Completely Overhauled sq.m. 46 Features by section: Sterilization length: mm. 8,600 Pre-cooling length: mm. 2,500 Length of warm water cooling: mm. 5,000 Cooling length: mm 1900 Single track entry belt width: mm 150 Length: mm 3800 Outfeed belt with 4 lanes width: mm 350 Pasteurizer equipment for sell length: mm 3500 Services for pasteurizer equipment for sell: We also offer the machinery reinstallation service at your company if you need it. We will create a dedicated offer if you wish, only after receiving all the necessary information. Upon request, we can also modulate the control panel and intervene on the machine’s PLC. Pgodsvguhwepfx Aicjr This is used to customize the functionality of the used pasteurizer for sale. If requested, we also provide the packing service if the goods are destined abroad and with transport by ship. One of our team of technicians will be at your service and will create a tailor-made project for your company. We have many solutions available for this pasteurizer equipment for sell, contact us at the numbers on the site for more information and to receive a quote for one of our used bottling machines. Additional information: For this pasteurizer equipment for sell it is necessary to build the electrical panel, this is missing in this equipment. Its construction is therefore carried out and created with the customer’s specifications, adapting the pasteurization areas to the production needs. Its speed on the 65 diameter is approximately 18,000 pieces per hour, speaking of cylindrical containers. This used tunnel pasteurizer is ideal for both tomato preserve jars and for tinplate and aluminum cans. Both fruit juices and soft drinks and even tomato puree can be pasteurized. The used tunnel pasteurizer has already been overhauled and is ready to be purchased and delivered to the end customer, we will follow all the issues related to its loading on trucks or containers included in the price.

Condition: used, Year of construction: 2004, machine/vehicle number: PST31, Used FISCHER Complete Skid-Mounted Pasteurization & Cooling LineTechnical Specifications & Performance DataThis skid-mounted plate heat exchanger pasteurizer is engineered for high-throughput thermal processing with integrated cooling and CIP functionality. Manufactured by FISCHER engineering and built on a stainless steel skid, it offers rapid deployment and reliable performance for beverage production and industrial packaging environments.Type: Plate heat exchanger pasteurizer (EUROCAL series)Model: EUROCAL 18CFGThroughput: 6,000 L/hSections: 4-section plate pack for heating, regeneration, and coolingDesign pressure (PS): 6 barManufacturing year: 2004Construction: High-grade stainless steel skid and process contact partsChiller module: Air-cooled heat-pump type (Cooling 30.0 kW; Heating 32.0 kW; Refrigerant R407C)Advanced Automation & Control SystemsThe pasteurizer features centralized automation for precise thermal profiles and repeatable product quality across shifts.Control panel: Central stainless steel electrical cabinet with PLC and touchscreen HMIInstrumentation: Pressure gauges, flow control, and temperature sensors for closed-loop regulationProcess analytics: Inline quality monitoring to supervise key product parameters in real timeCIP automation: Pneumatic valve islands and control heads orchestrating automated cleaning cyclesProduction Line Integration CapabilitiesDesigned to integrate seamlessly upstream of filling, this second hand thermal processing unit connects easily to existing utilities and can be paired with a used bottling line or new production line layouts.Inline/standalone: Operates as a standalone pasteurization and cooling skid or inline within a complete packaging machinery lineFormat flexibility: Suitable for multiple liquid products prior to filling in PET, glass, or other containersQuick connection: Skid piping and utility stubs facilitate fast commissioning and changeoversMachine Condition & Maintenance HistoryProfessionally maintained and presented in ready-for-operation condition, this equipment supports immediate relocation and rapid start-up for beverage production or food processing facilities.Status: Ready for immediate operationUpkeep: Well-maintained, industrial-grade components designed for continuous dutyOperational Performance & VersatilityIdeal for high-quality thermal treatment with efficient energy recovery, ensuring consistent pasteurization while protecting sensory attributes.Applications: Milk pasteurization, fruit juice processing, syrup handling, and brewery wort coolingEnergy efficiency: Regeneration section increases thermal efficiency and reduces utility loadQuality assurance: I... Pgedpfxoy Ai Hlj Aicjr

Condition: used, Year of construction: 2005, machine/vehicle number: PST36, Used APV N35 Plate pasteurizer 10246 KghTechnical Specifications & Performance DataThis plate pasteurizer is engineered for continuous high-efficiency thermal treatment in beverage and dairy processing. Manufactured by APV Products, the N35 model provides reliable heat exchange performance with a compact footprint, making it ideal for integration into a used bottling line or broader industrial packaging and beverage production setup.Manufacturer: APV ProductsModel: N35Nominal capacity: 10,246 kg/hHeat transfer surface: 54.6 m²Working pressure: 10 barWorking temperature range: 0.9 to 100 °COverall width: 1300 mmOverall height (max): 2500 mmOverall length: 2700 mm (approx. 3000 mm with control cabinet)Configuration: Plate heat exchanger pasteurizer (HTST/flash process)Previous application: Milk processingAdvanced Automation & Control SystemsThe APV N35 plate pasteurizer supports modern automation architectures for precise thermal treatment. Typical configurations include PID control of product and heating media with temperature, flow, and pressure instrumentation, as well as interlocks for safe operation. Integration with a plant PLC/HMI enables recipe management, trend logging, and alarm handling to stabilize outlet temperature and holding-time compliance. Operator safeguards and clear access points facilitate routine checks and adjustments while maintaining hygienic conditions. Quick disconnects and service-friendly plate pack design help minimize downtime during maintenance or format changes.Production Line Integration CapabilitiesDesigned for seamless integration upstream of filling and downstream of raw product reception or blending, the N35 aligns with beverage and dairy workflows in second hand and new industrial packaging environments. It pairs effectively with homogenizers, balance tanks, deaerators, and CIP systems, and can feed fillers handling PET, glass, or carton packaging in beverage production lines.Machine Condition & Maintenance HistoryThis unit is offered as a second hand plate pasteurizer formerly used in milk production. Its robust stainless-steel design and APV engineering support reliable recommissioning in a new beverage production or food-processing facility. Routine service of seals, gaskets, and instrumentation is recommended to align with site-specific quality protocols before startup.Operational Performance & VersatilityThe APV N35 delivers stable outlet temperatures and consistent holding times suitable for HTST pasteurization. The plate pack enables efficient heat recovery, optimizing energy use and reducing thermal load on utilities. The unit’s performance characteristics make it a strong fit for dairy applications such as milk, with potential adaptability to other heat-treatable liquid foods or beverages when configured with appropriate elastomers, plate patterns, and thermal profiles.Installation Requirements & Site PreparationPlan installation with the stated dimensions and allow service clearance for... Pgedpfx Aieznvfcjcjr

Condition: used, Year of construction: 1999, Capacity: 350 hl/h Operating over pressure: 24 bar Pgjdpfxezty Tus Aicjr Desing temperature: 104 °C Length: 1,6 m Width: 0,85 m Height: 2,2 m Weight: 5000 kg Features: product pump H: 9,8 bar (Hygiana CN II, GEA, 350 hl/h), booster pump H: 4,7 bar (EURO Hygia CN II, GEA, 350 hl/h), hot water pump H: 1,3 bar (Maxa -DIN 80-2ßß 4/4, GEA, 700 hl/h)

Condition: used, Year of construction: 2005, machine/vehicle number: AT32, Used APV N35 Plate pasteurizer 10246 KghTechnical Specifications & Performance DataThis plate pasteurizer is engineered for continuous high-efficiency thermal treatment in beverage and dairy processing. Manufactured by APV Products, the N35 model provides reliable heat exchange performance with a compact footprint, making it ideal for integration into a used bottling line or broader industrial packaging and beverage production setup.Manufacturer: APV ProductsModel: N35Nominal capacity: 10,246 kg/hHeat transfer surface: 54.6 m²Working pressure: 10 barWorking temperature range: 0.9 to 100 °COverall width: 1300 mmOverall height (max): 2500 mmOverall length: 2700 mm (approx. 3000 mm with control cabinet)Configuration: Plate heat exchanger pasteurizer (HTST/flash process)Previous application: Milk processingAdvanced Automation & Control SystemsThe APV N35 plate pasteurizer supports modern automation architectures for precise thermal treatment. Typical configurations include PID control of product and heating media with temperature, flow, and pressure instrumentation, as well as interlocks for safe operation. Integration with a plant PLC/HMI enables recipe management, trend logging, and alarm handling to stabilize outlet temperature and holding-time compliance. Operator safeguards and clear access points facilitate routine checks and adjustments while maintaining hygienic conditions. Quick disconnects and service-friendly plate pack design help minimize downtime during maintenance or format changes.Production Line Integration CapabilitiesDesigned for seamless integration upstream of filling and downstream of raw product reception or blending, the N35 aligns with beverage and dairy workflows in second hand and new industrial packaging environments. It pairs effectively with homogenizers, balance tanks, deaerators, and CIP systems, and can feed fillers handling PET, glass, or carton packaging in beverage production lines.Machine Condition & Maintenance HistoryThis unit is offered as a second hand plate pasteurizer formerly used in milk production. Its robust stainless-steel design and APV engineering support reliable recommissioning in a new beverage production or food-processing facility. Routine service of seals, gaskets, and instrumentation is recommended to align with site-specific quality protocols before startup.Operational Performance & VersatilityThe APV N35 delivers stable outlet temperatures and consistent holding times suitable for HTST pasteurization. The plate pack enables efficient heat recovery, optimizing energy use and reducing thermal load on utilities. The unit’s performance characteristics make it a strong fit for dairy applications such as milk, with potential adaptability to other heat-treatable liquid foods or beverages when configured with appropriate elastomers, plate patterns, and thermal profiles.Installation Requirements & Site PreparationPlan installation with the stated dimensions and allow service clearance for... Pgjdpfszndr Rox Aicjr

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 30107-34551, production capacity: 12,000 unit/h, TECHNICAL DETAILS Heating method: Steam Maximum temperature: 125 °C Flow rate: 6,000 - 12,000 liters/h MACHINE DETAILS Maximum pressure: 6 bar Psdpfx Aiozia D Eocsgr EQUIPMENT Integrated deaerator

Condition: used, Year of construction: 2006, machine/vehicle number: PST18, Tecnoindustria Used Pasteurizer Completely Overhauled Tecnoindustria brand mesh pasteurizer all stainless steel with squared stainless steel mesh complete with water recycling tanks with relative pumps, infeed and outfeed belt for jars or boxes, blower for drying jars or boxes, steam modulating group, heat exchanger, various connecting pipes and all its accessories for operation. The machine is totally overhauled It is made up of two sectors of which: first sector useful length 11450 mm second sector useful length 7350 mm overall dimensions: Total length 18.70 meters without ribbons Useful belt length axis by axis: 18.45 m Useful net width 2.00 m. Overall width of the machine body 2.36 m Overall width including trays 2.36 m + 0.65 m total 3.01 m Total useful area of the machine sq.m. 36.90 Height 1400 Features by section Sterilization length: mm. 7,700 useful Pre-cooling length: mm. 3,300 useful Length of warm water cooling + cooling: mm. 7,000 useful Height mm 1400 Single track entry belt width: mm 200 Length: mm 3200 Single lane outfeed belt with Intralox belt width: mm 400 length: mm 3700 useful Tecnoindustria Used Pasteurizer Completely Overhauled, The machine is totally overhauled, in excellent condition. It is necessary to build the electrical panel, this is missing in this equipment. Its construction is therefore carried out and created with the customer’s specifications, adapting the pasteurization areas to the production needs. Its speed on the 65 diameter is approximately 18,000 pieces per hour, speaking of cylindrical containers. Podpovguhkjfx Aicjgr This used tunnel pasteurizer is ideal for both tomato preserve jars and for tinplate and aluminum cans. Both fruit juices and soft drinks and even tomato puree can be pasteurized. The used tunnel pasteurizer has already been overhauled and is ready to be purchased and delivered to the end customer, we will follow all the issues related to its loading on trucks or containers included in the price.