Complete brewing plant

Diverse

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Fpodpfxoztpxme Aa Eek

Condition: like new (used), Year of construction: 2019, operating hours: 24 h, functionality: fully functional, type of input current: AC, working width: 1,500 mm, total width: 1,787 mm, total height: 1,953 mm, Equipment: compressor, Optical sorter with 5 different channels, sort by colours and size, for sorting grains, coffee, seeds, rice, nuts, plastic. Hi-resolution MultiVision inspection system - targets subtlest colour variations as well as light and dark colour defects Fpedpfx Ajwlk Ivsa Ejk Proprietary PROsize technology - sorts products and foreign material which are the same colour as the good product using size characteristics. Machine run time is only 24 hours, we buy the machine for a project that doesn't start, the machine is like new.

Condition: used, lot (ca. 25 Stück) verschiedener cutters und Fräskombinationen vorwiegend für MEC Vorschub oder ohne Markierung. Technical data: - Markierung: Ohne oder MEC - Bore: 40 mm - Weight: ~100 kg Fedpjzryn Aefx Aa Ejpk

Condition: used, Lot of 10 Used Industrial Pumps – Various Brands & Sizes We offer a complete lot of 10 used industrial centrifugal pumps, available from our warehouse in Rotterdam, The Netherlands. The lot consists of various pump configurations and sizes, including several pumps with stainless steel pump housings, large flange connections, and heavy-duty electric motors. The pumps come from an industrial environment and are offered as one complete lot. Lot details: Quantity: 10 pumps Condition: Used Various sizes and capacities Various electric motor sizes Several stainless steel pump housings Flanged inlet/outlet connections Complete pump/motor assemblies mounted on base frames Suitable for industrial applications The pumps have not been individually tested by us and are therefore offered in their current condition. Location: Rotterdam, The Netherlands Delivery: Ex Works Rotterdam, loaded onto buyer’s truck Payment: 100% payment in advance Terms of sale: The complete lot is sold “as is, where is”, without warranty or guarantee. No claims or returns will be accepted. Fpodpfx Aajztraas Esk Additional photographs and individual pump/nameplate information can be provided upon request. Preferably sold as one complete lot.

Condition: ready for operation (used), A Seitz filter machine including a Schenk dosing device for beer production is available. 1) Kieselguhr frame filter Seitz Orion 60, max. throughput capacity: 70hl-80hl/h, effective throughput capacity: approx. 45hl/h, max. total filtration capacity: approx. 600hl, pressing device: 2-stage planetary gear, number of plates: 36, number of end plates: 2, plate dimensions X/Y: 600mm/600mm, pipe diameter: 50mm, nominal width: NW50, machine dimensions X/Y/Z: approx. 3800mm/1100mm/1400mm. 2) Dosing device Schenk DO-S120, year of construction: 1971, capacity: approx. 160l/h, high-speed capacity: approx. 320l/h, nominal width: NW50, pipe diameter: 50mm. Documentation available. On-site inspection is possible. Fpjdpfjwd Talox Aa Eek

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Complete container system consisting of 24 units (20ft), manufactured in 2023 and in very good, well-maintained condition. The system was purchased in 2023 and is ideally suited for construction sites, accommodation, office, or social spaces. Composition of the 24 containers: • 1 × sanitary container • 1 × utility container with 2 showers and 2 partitions Fodpfx Asza Ahvja Espk • 7 × living double containers (total of 14 units) each with its own wet room • 10 × office containers, most recently used as an open-plan office Dimensions per container: 6,063 × 2,450 mm, interior height 2,500 mm. Location: Bad Dietzenbach. Collection or transport from the location. We will gladly provide you with further photos and detailed information – a sale in smaller quantities is also possible upon request. Technical data: Number of containers: 24 units (20ft) Sanitary container: 1 unit Utility container: 1 unit (2 showers, 2 partitions) Living containers: 7 double containers (14 units) with wet room Office containers: 10 units (most recently used as an open-plan office) External dimensions (per container): 6,063 × 2,450 mm Interior height: 2,500 mm Year of manufacture: 2023 Condition: very well maintained Location: Bad Dietzenbach

Condition: good (used), Various suction manifolds, suction distributors Only suction bell C is currently available; details can be found in the photos. Suction bell C: 140 euros The parts can be viewed on-site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse; see "other offers from this seller." Fpedpfxotp Hpbe Aa Eok

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device Fodpju Idbyofx Aa Espk -machine ilumination *

Condition: good (used), Our Services: - Repair factory for transformers to 63 MVA / 110 kV - New transformers Oil / cast resin - Newly reconditioned warehouse transformers / - Rental of transformers and stations - 24 h emergency service - Recycling / Disposal of Transformers - Accessories for transformers - Training / Expertise - Conversion of Oeltrafos on environmentally compatible Esterfilled Fpjdpfx Aas Swr Ee Esk - Certification: ISO 9001, OHSAS

Condition: used, Reusable bottle line for filling beverages into 0.5 l and 0.33 l glass bottles. The filling line comprises the following components: - Uncorker (Rink, 1995) with 2 uncorking heads - Unpacker (Albert Frey) with 2 unpacking heads - Crate washer (Göbel, 1971) for cleaning using spray nozzles - Bottle washing machine (GM Gera, 2007), single-end machine - Empty bottle inspector (Krones, 2016) for checking the base, side walls, neck and residual liquid - Glass bottle filler and capper (Krones), short-tube counter-pressure filler with 40 filling valves and capper for crown caps - Labelling machine (Krones, 1995) for wet glue labelling - Date coding (Domino, approx. 2010 – 2017), inkjet printer - Fill level, label and cap inspector (Syscona, 1997 – 2008) - Packer (Albert Frey, 2002) with two packing heads - Palletising system (ABB, 2014) with articulated arm robot - Conveyor belt systems for bottles and crates Additional title: Reusable bottles; manufactured between approx. 1971 and 2016 Nominal capacity appr.: 12000 Fl/h Formats: 0.5 l Euro and NRW, 0.33 l Giesinger; crown caps Features: Uncorker; Unpacker; Crate washer; Bottle washing machine; Empty bottle inspector; Filler and capper; Labelling machine; Date coding; Fill level/label/cap inspector; Packer; Palletising system Fpodpfx Aezhl Hpea Eok

Condition: used, Additional title: Brewing vessels with copper hoods and hop dispenser, whirlpool and wort cooling Capacity: 150 hl/brew Operation / Control: ProLeit / Siemens S7 Material: brew house vessels copper-covered Features: mash/wort kettle, mash/lauter tun, hop addition, vapor condenser system, whirlpool, wort cooler, various pumps and fittings Fpedjvcqufepfx Aa Esk

Condition: used, Bolts, hex bolts, flange nuts, hex nuts, collar nuts, washers, washers Fodpfjirnwxjx Aa Ejpk -Washers: Washers, various sizes 276 kg -Sizes/number: Ø10.5 to Ø31.5 mm see photo parts list -Price: complete -Total weight: 276 kg

Condition: used, Hydraulic filter, filter element, oil filter, filter cartridge, hydraulic oil filter, fuel filter, screw-on filter Fpodpfx Aaon R Tnaj Esk -Filter elements: hydraulic oil filter, fuel filter 478 pcs. -Type: Different types from different manufacturers -Price/tax: complete -Transport dimensions: 1200/800/H780 mm -Total weight: 236 kg

Year of construction: 2000, condition: used, Drais Mannheim / Lödige CoriMix® CM Continuous Ringlayer Mixer Type: K-TT 700 Motor: 55 kW 1500rpm Fpjdpfx Aaeh H S Hdj Esk Fully Stainless execution

Condition: used, Air filter, filter element, filter cartridge, screw-on filter, engine air filter, compressor filter, air filter element, air filter insert Fpjdpfx Aaepbig Ae Ejk -Filter elements: air filter 120 pieces -Type: Different types from different manufacturers -Price/tax: complete -Transport dimensions: 1200/800/H900 mm -Total weight: 151 kg