Used Felder G 560 for sale (109)

Condition: excellent (used), Year of construction: 2011, It is in perfect working condition, looks very good and has few operating hours. It has pre-milling, circular saw cutting, up and down milling, radius tickling, surface tickling, and polish. Bjdpfjxwqmasx Af Eelc

Condition: new, Year of construction: 2008, functionality: fully functional, feed rate X-axis: 9 m/min, workpiece height (max.): 60 mm, overall weight: 750 kg, rotational speed (max.): 12,000 rpm, Dismantling and loading can be handled by the seller! Auction of an unused Felder G 500! TECHNICAL DETAILS Edge thickness: 0.4-5 mm Workpiece height: 8-60 mm Feed speed: 9 m/min Spindle speed of milling unit: 12,000 rpm Minimum workpiece width: 70 mm Minimum workpiece length: 140 mm Radius scraper unit: R = 2 mm Polishing unit: 2 motors at 1,400 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,100 x 1,550 mm Weight: 750 kg FEATURES High-performance chain feed Support for coiled edge material Bodpfeyddgzex Af Eelc Guillotine blades for cutting coiled edges up to 3 mm Glue roller for EVA granulate from the Teflon-coated glue pot Spring-loaded pressure unit with 1 rubber pressure roller and 2 drive rollers Milling unit 0.27 kW, 100-tooth 24-tooth saw blade

Condition: new, functionality: fully functional, total length: 2,100 mm, total width: 900 mm, edge thickness (max.): 2 mm, total height: 1,250 mm, plate height: 45 mm, Dismantling and loading can be handled by the seller! Auction of an unused Felder G 200! TECHNICAL DETAILS Edge thickness: 0.4 - 2.0 mm Panel height: 10 - 45 mm Feed speed: 5 m/min MACHINE DETAILS Dimensions (L x W x H): 2,100 x 900 x 1,250 mm Required compressed air: 6 bar EQUIPMENT Pneumatic end-cutting guillotine Flush and radius trimming module (a = 15°, R = 2 mm) Teflon glue pot Electric temperature control (20 - 250 °C) Bsdjydc Uwepfx Af Ejlc

Condition: used, Year of construction: 2022, 0,4 - 5 mm Workingpiece thickness from to 10 - 45 mm Bjdoxpn Ufepfx Af Eolc Feed speed 8 m/min.

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Blodpfx Aeyf I T Uef Eoc Edge feed for coil and strip material Scraper knife

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total length: 3,350 mm, workpiece height (max.): 45 mm, total width: 1,510 mm, edge thickness (max.): 45 mm, total height: 1,640 mm, overall weight: 770 kg, extraction nozzle diameter: 60 mm, We offer for sale a professional edge banding machine with pre-milling unit of the company FELDER model G480. Below you will find some useful information about the machine: Bodpfx Astp T Dtjf Eslc * Year of production - 2017 * Equipped with the Schugoma hot-air system for zero joints * Connected load - 7 kW * Edge thickness - 0.4-350 mm * Thickness of the sheets - 8-45 mm * Minimum width/length of the sheet - 70/210 mm * feed speed - 9 m/min * has a pre-milling and corner rounding unit * Automatic feeding of edges from a roll * Impact shears for PVC and ABS edges up to a thickness of 3 mm. * Teflon glue tank with a capacity of 1.2 kg. * Saw blade cutting unit with 12,000 rpm. * Rotating control panel with LCD display. * Suction nozzle - 7 x 60 mm * Weight approx. 770 kg * Overall dimensions 335 x 151 x 164 cm (Wx Lx H) * Perfect technical and visual condition

Condition: used, Year of construction: 2015, height adjustment type: mechanical, - Year of manufacture: 2015 - Single owner. EQUIPMENT: Electrical Equipment - Supply voltage: 3x 400 V - Supply frequency: 50 Hz Workpiece Dimensions - Edgeband thickness: 0.4 - 3.0 mm - Workpiece thickness: 10 - 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units - Edgeband feeding from a reel via a feed plate - Edgeband feeding thickness from 0.4–3 mm, manual feeding of single strips - Guillotine shears for trimming edgeband from the reel up to 3 mm thickness - Gluing unit for granulated hot-melt adhesive, Teflon-coated glue pot Bjdpfx Aoya Ethsf Eslc - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing/fixing roller - Saw trimming unit, 9,000 rpm, 0.18 kW, HW saw blades Z= 16, Ø 80 mm - Multifunctional milling unit, 12,000 rpm, 0.22 kW, radius machining, straight milling, chamfering - Radius scraper unit, mechanically engaged, for R= 2 mm - Flat scraper unit, mechanically engaged Operation: - Control panel with LCD display and keyboard - Quick, tool-free unit adjustment system (Quick system) Feed: - Edged workpiece transport by chain with track - Feed speed: 8 m/min - Extendable support General data: - Extraction connection Ø 120 mm Overall dimensions: - Length: 2000 mm - Width: 800 mm - Height: 1500 mm - Weight: 360 kg On customer request: - The machine is suitable for processing PVC and ABS edgebanding 0.5 - 3 mm - Edgebanding speed approx. 7 m/min - Milling top and bottom with chamfer or R2 radius - Flat scraper - 1.2 kg Teflon glue tank - Pre-cut guillotine - Edgeband trimming with two saw units - Quick machine calibration system by placing a piece of edgeband in the dedicated clamp - The machine has been regularly serviced, lubricated, and cleaned, ensuring its excellent technical condition. - An ideal solution for demanding carpentry workshops and manufacturing plants.

Condition: used, Year of construction: 2010, functionality: fully functional, – Very good condition – Year of manufacture: 2010 – Operating and maintenance documentation (DTR) available TECHNICAL PARAMETERS: – Edge thickness min. - max.: 0.4 – 3.0 mm – Workpiece thickness min. - max.: 10 – 45 mm – Saw trimming unit – Milling unit for trimming excess edge tape flush or with a profile – Designed to remove excess edge tape at the top and bottom edges of the panel – Flush milling Bjdpfx Asw H Rzxsf Eelc – Milling of the edge tape at an angle or radius in a single work cycle – Edge overhang milling: Ø 70 mm, Z 6, a=15°, R=2 mm – INSPECTIONS CARRIED OUT BY FELDER SERVICE – COMPACT DIMENSIONS – PRECISE AND VERY EASY TO USE – Table dimensions: 2000 x 300 mm – Air supply requirement: 6 Bar – Power supply: 400 V – Power: 3.2 kW – Glue application roller and glue tank – Grooved glue application roller ensures uniform glue coverage on the edge of the workpiece – Feed speed: 9 m/min – Overall dimensions (L/W/H): 2000 x 1260 x 650 mm – Net weight: 360 kg

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper Bledpfx Afjw I H Rks Esc With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: good (used), Year of construction: 2022, operating hours: 167 h, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Further technical data 5,964 linear meters total 167 operating hours High-precision cross-cut saw unit with radius milling up to 2 mm edge materials Jointing unit incl. diamond cutters 5 mm package for bonding solid wood edges "Quick-Set System" for rapid adjustment to various materials Control panel with LCD display and keypad Exchangeable glue pot Ball-bearing turntable for roll edge material Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Turntable diameter: 740 mm Edge thickness: 0.4–5 mm Extendable workpiece support, extendable up to 450 mm Additional equipment Blsdpfx Asyfv Ugsf Esc 21 Surface scraper instead of polishing unit 42 Application of release agent by spraying

Condition: good (used), Year of construction: 2017, operating hours: 130 h, functionality: fully functional, input voltage: 400 V, power: 6.5 kW (8.84 HP), input frequency: 50 Hz, Further technical data Edge thickness: 0.4–3 mm Workpiece height: 10–45 mm Chain feed with 8 m/min Total running length: 5,864 linear meters Jointing unit with max. 2 mm material removal Strip edgebander in single-feed operation Guillotine for hard PVC/ABS up to 3 mm thickness Teflon-coated glue pot, 1.2 kg capacity, with glue roller Bjdoyfvhaepfx Af Ejlc End trimming unit, 0.18 kW Extraction connections: 2x 80 mm, 1x 120 mm 2x HW saw blades, D-80 mm, Z16 Multi-milling unit with 12,000 rpm and 0.22 kW, 'Quickset' system for radius, flush and chamfer milling Control panel with LCD display and keypad Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Rotary table for edge banding rolls Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Additional equipment: Surface scraper, mechanically engageable Radius scraper knife

Condition: excellent (used), Felder G360 Edgebander, Pre-milling unit, Glue application by roller, Pneumatic pre-cut guillotine, Pressure rollers, Finishing saws, Top and bottom milling unit R1 – R2, Profile scraper, Flat scraper, Edge thickness 0.4–3mm, Max. panel height 45mm, Blodsygv Ivspfx Af Eoc Feed speed 7m/min, Total power requirement 7KW, Machine length with table 290cm, without table 240cm, Leasing purchase option available. Very good condition

Condition: excellent (used), Edge banding machine Felder G480, Pre-milling cutters, Glue application with roller, Bedpfeygkl Nex Af Eelc Pneumatic pre-cut guillotine, Pressure rollers, Trimming saws for finish cut, Top-bottom milling unit R1 – R2, Corner rounding unit, Profile scraper, Flat scraper, Edge thickness 0.4-3mm, Max panel height 50mm, Feed speed 9m/min, Total power requirement 7KW, Machine length without extension table 340cm, Condition very good

Condition: excellent (used), Year of construction: 2018, Edgebander Manufacturer: Felder Blodpfox Niuvex Af Ejc Model: G360 Year of manufacture: 2018 Operating hours: approx. 813 h Edge thickness: 0.4 - 3 mm Workpiece thickness: 10 - 45 mm Feed speed: 8 m/min Total power: 5.5 kW Overall length: approx. 3,200 mm Pre-milling unit: Yes End trimming unit: Yes Flush trimming unit: Yes Radius scraper: Yes Surface scraper: Yes

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Diamond cutter and glue roller newly installed. This FELDER MG580 edgebander was manufactured in 2010. Ideal for precise edge banding applications, it represents a reliable choice for enhancing your woodworking operations. Contact us for more information. Application Types Edge Banding Blsdpfx Afjx D Rklo Esc

Condition: ready for operation (used), Year of construction: 2012, operating hours: 1,555 h, machine/vehicle number: CA.03.013.12, Edge banding machine FELDER G400, used machine / condition as coming in from customer. Bljdpfxsng H Uvo Af Eec Machine is functional tested and OK. Without service / warranty for this price. Free loaded into your truck/trailer. Directly available ex works Barneveld (NL)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, FELDER G330 Edge Bander Used edge bander, post-service inspection. - Machine in excellent technical condition. - Year of manufacture: 2013. - One-owner machine. - Recently serviced. EQUIPMENT: Electrical equipment: - Supply voltage: 3x 400 V - Power frequency: 50 Hz Workpiece dimensions: - Edge thickness: 0.4 – 3.0 mm - Workpiece thickness: 10 – 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units: - Edge feeding from coil via feed plate - Edge feeding for thicknesses 0.4–3 mm, manual feed for individual edging strips - Guillotine shear for trimming coil edges up to 3 mm thick Bodexly I Aopfx Af Eslc - Gluing unit for hot-melt granulate adhesive, Teflon-coated glue pot - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing roller - Saw trimming unit: 9,000 rpm, 0.18 kW, HW saw blades Z=16, Ø 80 mm - Multifunctional milling unit: 12,000 rpm, 0.22 kW, for rounding, straight milling, and chamfering - Mechanically-activated corner scraper unit for R=2 mm - Mechanically-activated flat scraper unit Operation: - Control panel with LCD display and keypad - Quick, tool-free unit adjustment system Feed: - Workpiece feed with chain-type conveyor - Feed speed: 8 m/min - Extendable support General data: - Extraction port Ø 120 mm Overall dimensions: - Length: 2,000 mm - Width: 800 mm - Height: 1,500 mm - Weight: 360 kg Machine financing available via leasing or installments. Just visit our website: jbsmaszyny.pl We invite you to test the machine. Where to see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE, Poland Nationwide machine transport! Phone: 663 495 647 (German) Phone: 664 335 475 (English) Phone: 530 632 386 (English)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,265 mm, travel distance Z-axis: 120 mm, saw blade diameter: 120 mm, Equipment: CE marking, Dismantling and loading can be handled by the seller! TECHNICAL DETAILS Working area X: 3,250 mm Working area Y: 1,265 mm Working area Z: 120 mm Tool holder: HSK-F63 Tool changer: 10 positions, mounted on the milling head Drilling and sawing units Vertical drilling spindles: 12 Blsdpfx Afjyddqmj Esc Horizontal drilling spindles X-axis: 4 Horizontal drilling spindles Y-axis: 2 Groove milling unit X-direction: 1 Saw blade diameter: 120 mm Table system Pod and rail table: available Consoles: 6 MACHINE DETAILS Drive data Main motor power: 9.2 kW Total connected load: 15 kW Vacuum pump capacity: 100 m³/h EQUIPMENT Positioning aid Safety mat Digital LED display on the consoles Auxiliary device for tool change Two rows of stops Workpiece supports Handheld control device Pendulum processing CE marking

Condition: new, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0711ST0619, feed rate X-axis: 13 m/min, rotational speed (max.): 12,000 rpm, Dismantling and loading can be handled by the seller! Auction of an unused Format 4 Felder Perfect 40! TECHNICAL DETAILS Feed rate: 13 m/min Bljdsyddmnjpfx Af Ejc Maximum material thickness: 3 mm Main trim saw motor power: 0.5 kW Main trim saw motor speed: 12,000 rpm Trimming and profile unit motor power: 0.68 kW Trimming and profile unit motor speed: 12,000 rpm Polishing unit motor speed: 1,400 rpm MACHINE DETAILS Electrical data Voltage: 400 V Phases: 3N Frequency: 50 Hz Power: 8 kW EQUIPMENT Guillotine for edging material up to 3 mm Teflon-coated glue pot for 3 kg EVA granulate Audio generator Glue roller with quick-change system Pneumatic pressure unit, 1 driven and 2 conical pressure rollers End trim saws with carbide-tipped blades Z = 24, d-100 x 20 x 3.2 mm Trimming and profiling unit with foldable option up to 15° Edge scraper for R = 2 mm Polishing unit with 2 motors

Condition: used, Year of construction: 2022, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes Blsdpfx Ajx Tt Unef Eec - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Bodoxg Igijpfx Af Eslc

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale: FORMAT-4 Profil 45 Z spindle moulder with x-motion control, year of manufacture 2017. The machine is in excellent condition, as it has seen very little use. Equipment / Features: Model: FORMAT-4 Profil 45 Z Version: Spindle moulder with x-motion control Year: 2017 Bedpfxsyfgbds Af Eelc Precision and robust industrial design Suitable for professional use Condition: Very good condition Technically flawless Hardly any signs of use If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Location: Supplier Bsdpfx Aexta Dysf Eolc

Condition: used, Year of construction: 2016, Sliding table 2800 mm, cutting width 1250 mm, controlled parallel fence, kappa 400 X, tilting saw unit 45°, saw blade diameter: 250 - 400 mm, max. cutting height: 133 mm, electric height adjustment, motor 5.5 kW, 3 speeds: 3500/4500/7500 rpm. X Motion screen control (touch function) at eye level, additional scoring function, easy-lock quick-change system for main saw blade. Location: Supplier Bedpfx Aoxta Dmsf Ejlc

Condition: used, Year of construction: 2013, total length: 4,800 mm, total height: 1,700 mm, total width: 900 mm, Weight: 1.250 kg Price: On request Edgebander Serial number: 200.04.007.13 400V 11kW 3PH 50HZ 28A multifunction trimming unit Glue unit Workpiece height 8-60mm - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: 200.04.007.13 - Transport dimensions: 4800mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Blodjwlv D Nopfx Af Esc VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels