Used Felder A 951 for sale (110)

Condition: excellent (used), Year of construction: 2014, Motor power: 7.5 HP (5.5 kW) Motor voltage: 400 V (50Hz) Planing width: 410 mm Planing shaft: 4-blade field system planing shaft No. of planing knives: 4 Planer table length: 2,200 mm Planer fence: 1,300 x 170 mm Chip removal: 5 mm Suction connection: 120 mm Weight: 510 kg Dressing guard EURO Standard Standard equipment - Planing shaft with 410 mm planing width - Infeed planer table with table length 1080 mm - Jointer fence with ruler 1300 x 170 mm - EURO Standard planer guard - 4-blade field system planing shaft Location: ex stock 54634 Bitburg Rsdpfsh Hp Hyex Acvor - immediately available -

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, operating hours: 443 h, Format 4 Panel Saw Kappa 550 e-motion - 10 kW, 3 speeds: 3000/4000/5000 rpm - Year of manufacture: 2017 - Scoring unit operation indicator - Crosscut fence 3200 mm, swivels 90°–45°, with 2 flip stops - Outrigger table 1250 x 650 mm - “X-Roll” sliding table, cutting length 3200 mm, mitre fence shoe Rsdpfx Acjw Tfahevjr - Electrically positioned rip fence with digital readout in the operator panel at eye level, cutting width 1250 mm - Overhead guard, hood for 90° cuts and hood for angle cuts, both height adjustable and can be swung out of the working area - e-motion control system with 15" color touchscreen, operating panel at eye level. USB interface and network connection prepared, adjustable & swing-away from the working area - Saw blade diameter 250–550 mm, max. cutting height 202 mm - Electrically positioned height & angle adjustment 0°–46° - Circular saw with table extension up to 1200 mm behind the saw axis, powder-coated steel - Weight: 1300 kg - Scoring unit operation indicator (duplicate in original) - Total operating hours: 443.47 h - Including many as-new saw blades and groove cutter blade Price ex location Transport available at additional cost!

Condition: used, Year of construction: 2016, Central pneumatic valve manifold, bus-controlled. Optimized maintenance unit with pressure sensor. Additional control air supply and pressure build-up valve. Chain feed with 2 feed speeds: 12 and 20 m/min. Drive motor 2.2kW (S6). Minimum workpiece length 140mm. Minimum workpiece width varies depending on workpiece length, height, and surface condition. 20 m/min feed is only possible up to a maximum edge thickness of 3mm and a maximum workpiece height of 25mm. When the corner rounding unit is selected, the speed automatically decreases to 12 m/min. Segmented, rubberized support pads with quick-change system. Minimum workpiece width varies depending on workpiece length, height, and surface condition. Electrically: 3x400V 50Hz. If a residual current circuit breaker (RCD) is upstream of the machine, it must be an all-current sensitive residual current device, type B, suitable for frequency inverter operation, with a tripping current of 300mA. End position damping for cross-cut saw unit. Jointing unit with plunge-controlled diamond cutters; speed 12,000 rpm, 4.4kW, max. cutting depth 3mm. Jointing cutter with diamond blades Z2+2, D-60 x 64 mm. e-Motion control. Extension frame for tempora 60.12. Machine base of the tempora 60.12 edgebander is made of thick-walled, electrowelded steel construction, featuring ribbing for high stability. Pneumatic-mechanical infeed lock for workpiece distance monitoring: a pneumatically controlled steel bolt prevents infeed of workpieces before the minimum distance is met. Prepared for retrofitting a pre-melter. Operating tools for tempora series. Workpiece feed and feed fence: the feeding support surface is designed as a roller bed for sensitive surfaces. The robust feed fence has a length of 1100mm. The jointing removal for the jointing unit is electrically position-controlled from 0-3mm at the feed fence and displayed via e-motion control. Upper pressure beam tempora 60.12E: made of welded, torsion-resistant steel construction. Motorized, controlled adjustable workpiece height from 8-60mm via e-motion control. Smooth, staggered, double-row upper pressure rollers ensure uniform pressure distribution on the workpiece. Workpiece distance monitoring with traffic light indicator. Spray application of separator agent. Cutter configuration 60mm Z3+3 'whispercut' tempora series. Glue application roller with reverse function. 50Hz rotary table — edge magazine for coil edge material 0.4-3mm. Ball bearing rotary table, diameter 800mm, for coil edge material. Strip magazine for 12 pieces of 10mm edges. Perfect 608: max. edge thickness 8mm. Edge feeding for coil and strip material, tempora series. Corner processing unit with motorized adjustment for post- and softforming profiles. Application-controlled profiling unit for machining end edges; edge thickness/workpiece height 10-60mm; min. workpiece length 270mm. Wood edges are possible only to a limited extent, depending on edge material. Restrictions apply for loose core layers on post-/softforming parts and extremely thin melamine/foil edges and surface materials. Pneumatically controlled, Teflon-coated glue unit for 1.5kg EVA granulate with synchronized glue roller and quick-change system. Suitable for processing PUR adhesive, taking adhesive processing guidelines into account. Rodpfx Acjyx Iwbevor

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depends on clamping system) • Operating terminal on left side of machine • Hand terminal with axis speed control and emergency stop • Software: Woodflash (CNC board, tool database, program editor) • Positioning display for workpiece support and vacuum suction cups • Vacuum connection for template milling (left side), connection diameter 12 mm Rodpfx Acex D D Hmjvsr • Vacuum pump: 1x, total suction power 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-station linear on left side of machine stand, incl. pickup space for aggregates; max tool diameter 250 mm; max tool length 240 mm • Drill head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling length 70 mm; shank Ø 10 mm • Groove saws: 2 (one X, one Y); max blade Ø 120 mm; max thickness 5 mm; continuously variable speed up to 7,500 rpm • Safety: front light barrier system

Condition: ready for operation (used), Year of construction: 2020, cutting length (max.): 5,300 mm, cutting depth: 80 mm, Technical Specification Max. Cutting Length 5300 mm Max. Cutting Depth 80 mm This Felder Format 4 Kappa V80 panel saw was manufactured in 2020. It features a powerful 5.5 kW motor, a saw blade diameter of 300 mm, and can handle cutting lengths up to 5300 mm and heights up to 2200 mm. Ideal for precise large-scale panel cutting. Contact us for more information about this machine. Application Types Sawing (Wood) Rsdpfjx D D Scsx Acvjr

Condition: ready for operation (used), Year of construction: 2019, This Felder FORMAT 4 Tempora60.06LX edgebander was manufactured in 2019. It features an x-motion PLUS control system, chain feed with a speed of 10 m/min, and a Teflon-coated gluing unit for EVA or PUR granulate. The machine supports edge thicknesses from 0.4 to 3 mm and includes a multifunctional milling unit. Consider the opportunity to buy this Felder FORMAT 4 Tempora60.06LX edgebander. Contact us for more information about this machine. Redpfxsx D D R So Acvsr Application Types Edge Banding

Year of construction: 2021, condition: ready for operation (used), This Felder FORMAT 4 KAPPA 550 panel saw was manufactured in 2021. It features a sliding table saw with a saw blade diameter range of 250-550 mm, offering cutting heights of 202 mm at 90° and 140 mm at 45°. It supports three speeds: 3000, 4000, and 5000 rpm, and includes a cutting width of 1250 mm and length of 2800 mm. The machine also boasts e-motion control and a telescopic stop for crosscuts up to 3200 mm. Contact us for more information. Application Types Rjdpfx Acox D Exqovor Sawing (Wood)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Edgebanding Machine Tempora F 60.06 - Year of manufacture: 2018 - Interchangeable glue pot - Units for pre-milling, end trimming, flush cutting, milling, radius scraping knives, flat scraping knives, buffing - Includes separation agent and cleaning agent application - Spray unit - Edge thickness: 0.4–6 mm Rjdsx Ha I Ujpfx Acvsr - Installation length: 3220 mm - Saw trimming

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Rodpfxexg Igio Acvor

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 850 kg, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, grinding width: 650 mm, Further technical data Grinding height: 3 mm - 200 mm (250 mm) Grinding width: 650 mm Extraction connection: 2 x 120 mm Feed speed: infinitely adjustable 2.5 - 10 m/min Standard equipment - Maintenance interval control - Plain text error messages - Constant infeed height – fixed table, 900 mm - Electric height adjustment incl. fine adjustment from the control panel - Feed speed steplessly adjustable from 2.5 to 10 m/min via inverter at the control panel - Endless belt conveyor - Automatic feed mat centering - 1st brush unit with selectable steel brush, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - 2nd brush unit with Tynex brush K60 D=200mm, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - Dimensions: 1455 x 1070 x 1250 mm - Required air pressure: 6 bar Optional equipment Rsdpfx Acew Axi Aovsr 022 7.5 HP (5.5 kW) motor power, 1st unit 024 7.5 HP (5.5 kW) motor power, 2nd unit 027 Oscillation control for 1st and 2nd brush units 028 Opening height 250 mm instead of 200 mm

Condition: excellent (used), Panel saw Felder kappa 550 format 4 Sliding table 320 cm, Blade tilt and height adjustment motorized, Right-side fence motorized adjustable up to 1250 mm, Main motor 5.5 kW, Scoring unit, Rodpfjyvrqyex Acvor Maximum blade diameter 500 mm, Used machine, in very good condition.

Condition: used, Year of construction: 2016, cutting height 133 mm tiltable sawblade 0-45° cutting width with rip fence 1250 mm motor 5,5 kw scorring unit Redpoymcpmefx Acvjr cutting length 2500 mm machine avaiable from medio April

Condition: used, Year of construction: 2007, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, – Year of production: 2007 – Austrian manufacture TECHNICAL SPECIFICATIONS: – Total power: 7.35 kW – Max. saw blade diameter: 450 mm – Min. saw blade diameter: 250 mm – Scoring blade diameter: 125 mm – Pro Gline carriage guides – Carriage length: 2,800 mm – Fence with two stops – Cutting width to the right: 1,250 mm – Three spindle speeds: 3,500 / 4,500 / 5,500 RPM – Main motor power: 5.5 kW – Electric height adjustment of cut – Electric angle adjustment of cut Redpfxsymz Ube Acvsr – Electric setting of cutting width on the right side – Automatic scoring unit advance – Extraction port diameters: 100 mm and 120 mm Transport dimensions: – Length: 290 cm – Width: 230 cm – Height: 180 cm – Weight: approx. 1,000 kg

Condition: used, Year of construction: 2018, Working width: 410 mm Cutterhead: reversible knives Number of knives: 4 Jointer table length: 2000 mm Jointer fence angle adjustable: yes Jointer tables fold up: manual Maximum thicknessing capacity: 240 mm Thicknessing table height adjustment: handwheel Display for planing thickness: mechanical counter Redjyhgh Njpfx Acvsr Feed speed: 6/12 m/min Infeed roller: steel Outfeed roller: steel Table rollers: no Motor power: 3 kW Motor brake: yes, automatic Extraction port: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 450 kg

Condition: used, Year of construction: 1991, machine/vehicle number: 78-08/093-91, functionality: fully functional, planing width: 400 mm, Combined Planer Thicknesser Felder AD 6-41 Year of manufacture: 1991 S/N 78-08/093-91 In good condition Rodeywfbuopfx Acvsr Planing specifications Planing width: 410 mm Thicknessing width: 404 mm Thicknessing height: approx. 4 – 220 mm Maximum chip removal: 5 mm Cutter block / cutting data Cutter block diameter: approx. 86 mm Number of knives: 2 Cutter block speed: approx. 4,700 rpm Table / Construction Total length of planing tables (standard): approx. 1,680 mm Feed Feed speed: stepless, approx. 6.5 m/min with digital height adjustment Electrical data Motor power: 4.0 kW (5.5 HP) Voltage: 400 V three-phase (typical for this series) Extraction connection approx. 120 mm Weight approx. 800 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale: FORMAT-4 Profil 45 Z spindle moulder with x-motion control, year of manufacture 2017. The machine is in excellent condition, as it has seen very little use. Equipment / Features: Model: FORMAT-4 Profil 45 Z Version: Spindle moulder with x-motion control Year: 2017 Precision and robust industrial design Suitable for professional use Condition: Very good condition Technically flawless Hardly any signs of use If you have any questions or require further information, please send us a message or call us. Rodpfxoyfgbdo Acvsr

Condition: new, Year of construction: 2025, For sale is a Felder K500 P panel saw with an 800 mm cutting width. This is a brand-new machine (originally packaged) with full warranty/guarantee. Technical data: - 2050 mm X-Roll sliding table Rodsyk T H Dopfx Acver - 1300 mm outrigger table with 2600 mm crosscut fence - Angle index system - 800 mm cutting width across the entire table width - Rip fence with fine adjustment - Extraction pipe holder for saw blade guard - Additional crosscut stop 1300 mm - 5.5 HP (4 kW) motor, 400 Volt - Machine No. 441.11.031.25 The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, format Reference: R-D1618

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, type of input current: AC, cutting height (max.): 133 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, rotational speed (min.): 3,500 rpm, total length: 4,500 mm, Equipment: documentation/manual, saw blade guard, scorer, We are offering this very well-maintained Felder Format-4 Kappa 450 x-motion panel saw, year of manufacture 2023. Redpfx Ajytpzpscvsr Manufacturer: Felder Model: Format-4 Kappa 450 x-motion Year of manufacture: 2023 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Panel saw Format4 kappa 550 CNC Sliding table 320 cm, Max. blade diameter 550 mm Blade tilt and height are motorized, Rodpfx Acoylxbcevsr Right-side rip fence motorized, adjustable up to 1599 mm, Fence on sliding table motorized – simply enter the dimension and it sets automatically Fence can be set at an angle 3-axis scoring unit electrically adjustable with parking function Main motor 7.35 kW, 3 cutting speeds Used machine, condition as new

Condition: used, Felder AD 741 Surface and Thickness Planer Rjdpsxxavmefx Acver Spiral cutter block Main motor 4 kW, Surface planer table length 2000 mm, Planing width 410 mm, Thicknessing capacity height 230 mm, 1 feed speed, Manual thickness table adjustment with digital height indicator Machine ready for operation, quiet

Condition: excellent (used), Felder kappa 550 panel saw, format 4 Sliding table 320 cm, Blade tilt and height adjustment motorized, Right-hand fence motorized adjustable up to 1600 mm, Main motor 7.35 kW, Rjdpfjx Swzvex Acver Max blade diameter 500 mm Used machine, in very good condition.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Edge band thickness from 0.4 to 5 mm Panel height from 8 to 50 mm Max table thickness: 60 mm Premilling Glue with interchangeable Teflon-coated tank Multifunction finishing unit Corner rounding Spray systems for release agents or lubricants Sanding unit End trimming unit Radius/corner scraper unit Glue scraper Brushing unit Control: Touchscreen panel Total power: 8.4 kW Rodpfx Acoyplmyjvsr

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Carriage length: 3800 mm Scoring unit Electric adjustment of blade and scorer height and angle Electric positioning of right fence Touchscreen digital control panel Table equipped with additional blade switches Maximum blade diameter: 550 mm Total power: 7.35 kW Year of manufacture: 2014 Power supply: 380 V Rsdpsymwy Tefx Acver

Condition: excellent (used), Year of construction: 2008, working width 510mm 4-knives shaft tables length 2250mm motor power 7,35kW angle regulated fence year 2008 iron cast tables Redpfx Aew Ad Iwscvjr

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor Redpfxjxrahco Acvsr External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders