Used Felder Af 10 for sale (130)

Condition: used, Mobile Extraction Unit AF 14 - Year of manufacture: 2013 - 400 Volt - 1.85 kW - 2350 m³/h air flow rate Ijdex Htbnepfx Aa Eoik - 140 mm Ø suction port - 200 liter chip collection bag - Steel impeller - Dimensions (L x W x H): 965 x 570 x 2030 mm - Weight: approx. 50 kg

Condition: excellent (used), Year of construction: 2024, For sale is a Felder AF-22 extraction unit with a maximum air volume flow of 3100 m³/h. The extraction unit is in very good condition and has been checked and serviced by our specialist staff. Technical specifications: - Extraction capacity: 3100 m³/h - Max. negative pressure: 2510 Pa Iiedoxxiy Uopfx Aa Esk - Extraction connection Ø 160 mm - Chip container volume: 2 x 200 liters - Incl. dust filter cartridge + shaker device - Year of manufacture: 2024 - Motor power: 3 kW The extraction unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: extraction unit, dust extraction, filter, cartridge filter Reference: R-E28WO

Condition: new, Year of construction: 2025, operating hours: 380 h, functionality: fully functional, machine/vehicle number: 220.02.004.25, The machine was purchased in January 2025 / delivered in April / used from April to July 2025. For sale due to redundancy following a merger with another joinery. The machine is like new. It features an infeed table with an air cushion, Edgebanding width up to 60 mm and solid edging up to 6 mm thick. Edge thickness milling unit Hot melt granule gluing station Edge trimming unit: ABS 2 mm / solid 6 mm Curve trimming unit for doors Iiedpfx Aaox Itpzj Esk Surface scraper unit and edge scraper unit Cleaning unit 3 spray stations: antistatic / anti-scratch for edges / cleaning. Full details of all tools are listed on the attached purchase invoice.

Condition: used, Edgebanding machine Tempora F 60.06 - Year of manufacture: 2018 - Jointing cutter, radius cutter, scraper for radii and surfaces - Cleaning and release agents - Spray device - Edge thickness: 0.4-6 mm - Installation length: 3220 mm Iodpfx Aaex Ha I Ue Eoik - Sawing/trimming unit

Condition: used, Year of construction: 2010, Machine operates perfectly, the front cleaning unit requires cleaning. Fully functional Year of manufacture: 2010 Radius scraper blade Flat scraper blade Cleaning unit Jointing cutter up to 3 mm Nesting milling unit Pneumatic insertion lock Iiodpsx Hqdmefx Aa Ejk Polishing Machine no.: 200.07.011.10

Condition: ready for operation (used), Year of construction: 2021, This Felder FW 1102 P was manufactured in 2021. A used wide belt sander featuring a contact roller unit and a fine sanding with segmented electro-pneumatic sanding shoe. It includes a 7" touch color screen, digital grain compensation, and a vacuum table. The feed speed is variable from 2.5 to 18 m/min, sanding width of 1100 mm, and height range from 3 to 170 mm. Consider the opportunity to buy this Felder FW 1102 P belt sander. Contact us for more information. Iisdpox D Eyhefx Aa Eek Application Types Sanding

Condition: used, Year of construction: 2022, Direction of plate feed: from operator to the left Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Ijdpfxsx H Tmkj Aa Eoik Maximum workpiece thickness: 45 mm Minimum workpiece length: 140 mm Feed speed: 9 m/min Jointing unit: Yes, with 2 milling units Jointing tool: DIA indexable insert cutter Diameter: 80 mm Height: 49 mm Infeed fence adjustment: manual Cross-cut shear up to: 3 mm Single-edge feeding: possible Gluing: glue contact roller Glue pot design: replaceable + additional glue pot PU gluing: possible Cross-cut saw: yes Combination unit for flush/chamfer/radius trim: pneumatically adjustable Profile scraper: pneumatically adjustable Flat scraper: yes Buffing unit: yes Spraying device: release agent/cleaning agent Unit display: on the display Control type: PLC line control Operation: touch screen Motor power: 14.5 kW Transport device: no Extendable roller support: yes Protective hood: yes Storage location: customer

Condition: excellent (used), Wide Belt Sander Felder FW 1102 C Sanding width: 1100 mm Sanding height: 3–170 mm 1st unit with rubber calibrating roller, hardness 85 2nd combination unit with rubber roller and sanding pad with stepless pressure adjustment for delicate sanding of veneered components 15 kW motor with automatic star/delta starter Feed speed adjustable via frequency inverter Electric table adjustment Ijdpox A Dqijfx Aa Eeik Electronic table position display Workpiece thickness gauge Machine in very good condition, barely distinguishable from new

Condition: used, Year of construction: 2017, Fw 1102 Perform Year of manufacture: 2017 5 operating hours 15 kW motor with brake Electric table height adjustment Continuously variable feed 2.5 – 18 m/min Sanding height: 3 – 170 mm Abrasive belt dimensions: 1120 x 1900 mm Belt blowing, timer-controlled Sanding width: 1100 mm Iisdpsxrwn Tjfx Aa Ejk Extraction connection: 2 x 160 mm and 1 x 120 mm Vacuum carpet with integrated blower in the machine frame 1st unit: rubber-coated profiled contact roller 2nd unit: electro-pneumatic segmented sanding pad, 25 mm segment width, for veneer sanding work With lacquer sanding, digital grit compensation Pneumatic sanding belt oscillation Roller table extension on both sides Scotch-Brite brush unit at the machine outlet, 150 mm diameter Electronic sanding belt run monitoring Includes 30 sanding belts

Condition: as good as new (ex-display), functionality: fully functional, grinding width: 1,100 mm, grinding height: 170 mm, power: 14.71 kW (20.00 HP), grinding belt length: 1,900 mm, grinding belt width: 1,100 mm, input frequency: 50 Hz, input voltage: 400 V, Further technical data: Sanding height: 3 - 170 mm Extraction connection: 200 / 120 mm Iiodpjvf D S Aefx Aa Ejk Standard equipment: - Star-delta starter - CE safety standards - Electrically controlled height adjustment of the feed table including fine adjustment from the control panel - Stepless feed speed from 2.5-18 m/min adjustable via inverter from the control panel - Hand guard and workpiece thickness safety device - Endless belt conveyor with honeycomb structure - Automatic feed belt centering - Control unit with 7" touch color display - 1st unit with rubberized, profiled contact roller, 85° Shore hardness - 2nd unit (sanding pad unit): The electro-pneumatic segmented sanding shoe with 25 mm segment width enables the independent processing of multiple workpieces for perfect veneer sanding. The standard time-controlled cleaning blower ensures maximum sanding belt service life, especially for lacquer sanding or very fine grit. - Digital grit compensation - Mechanically preloaded rubber pressure rollers - Sanding belt oscillation, electronic-pneumatic - Electronic sanding belt run-off protection - 1 motor with 15 kW (20 HP) including automatic star-delta start - Min. air pressure (bar): 6 Optional equipment: - Vacuum table with integrated blower in the machine frame - 15 kW (20 HP) motor including variable cutting speed from 2.4 to 19 m/sec - Double-sided roller table extension, 200 mm - Scotch Brite brush unit at the machine outfeed, D=150 mm - Switching contact for slide valve control; shut-off valves for extraction can thus be actuated. Including delivery and installation in postcode areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 320.03.003.13, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 3,120 mm, feed length Y-axis: 2,160 mm, feed length Z-axis: 105 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 11 kVA, torque: 4 Nm, controller manufacturer: WoodFlash CAD, H10 CNC Control, controller model: H10 CNC Control, Windows 10, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, total height: 2,510 mm, total length: 7,760 mm, total width: 4,860 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 24,000 rpm, overall weight: 3,800 kg, spindle motor power: 10,000 W, number of spindles: 1, number of slots in tool magazine: 8, tool length: 300 mm, tool diameter: 180 mm, tool weight: 1,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Engine power: 13.59 PS/HP (10 kW) Year of manufacture: 2013 Motor voltage: 3x 400 V Iedsw Tkm Topfx Aa Eoik Motor frequency: 50 Hz Weight (kg): 3800 Dimensions (L x W x H mm): 8768x4864x2510

Condition: like new (used), Year of construction: 2023, For sale is a demonstration Felder FB-710 bandsaw with a cutting width of 690 mm. The machine was only briefly used at our premises for demonstration purposes. It is therefore considered as new and is offered with full warranty / guarantee. Technical specifications: - Table size: 840 x 700 mm - Cutting height: 460 mm - Cutting width: 690 mm - Table tilt: -5° to +45° - Saw blade length: 5120 mm - Weight: approx. 400 kg Iedpfsww Hhvox Aa Esik - Motor power: 7.5 HP - Exhibition machine - Year of manufacture: 2023 The bandsaw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: bandsaw, saws, saw, band Reference: R-A0117-67

Condition: used, AD planer Felder AD741, very good condition, year of manufacture 2003, 4 kW S6, 400 V, 410 mm table length, 2000 mm table width, 4 knives, approx. 400 kg Iiodpfx Aovrvkdea Esk Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Felder K700 panel saw, year of manufacture 2006, good condition, 880 mm table width, 100 mm cutting height, 1300 mm panel table length, approx. 300 kg Prices subject to change, errors, printing and typesetting errors reserved Isdpfx Aaevrvluo Esik

Condition: used, Band saw Felder FB510, year of manufacture 2019, very good condition, standard equipment Iodpfx Aevr I I Iea Ejik Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Iiedpfexlt Shox Aa Esk Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Isdpfsrubg Hex Aa Esik

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Milling unit spindle height adjustable via handwheel 0 - 125 mm Milling spindle tiltable up to 45° via handwheel Angle display for tilting with digital clock Tenoning and slotting table Z Ijdpfx Aex Hll Sja Eeik Anodized table length 1000 mm Milling fence 240 Milling fence rails 450 ALU anodized With 3-roller power feeder Availability: approx. end of January 2026 Location: NRW

Condition: excellent (used), Year of construction: 2024, operating hours: 279 h, functionality: fully functional, cutting length (max.): 3,200 mm, Well-maintained Format 4 Kappa 550 panel saw, acquired in 2024 as a refurbished demonstration unit. The machine’s actual year of manufacture is 2017. Equipped with a high-quality feature set. Iijdox H Tydjpfx Aa Ejk The main saw unit has only 279 operating hours (the scoring unit 22 h). Power: 10 kW Sliding table with X-Roll technology: 3,200 mm Electronically controlled height and tilt adjustment 0°–46° Saw blade diameter 250–550 mm, max. cutting height 202 mm Overhead guard, hood for 90° and hood for angled cuts E-motion control 15” color touchscreen display Electronically positioned rip fence with digital readout, cutting width 1250 mm Tools and replacement saw blades (main and scorer) included. #8455

Year of construction: 2008, condition: ready for operation (used), General Data Measurements height 250 mm Measurements depth 1700 mm Dimensions Machine Length 3530 mm Main Drive Spindle Speed 24000 RPM This 3-axis CNC processing center manufactured in 2008 features a robust Felder Format4 Profit 2.s with a working area of X=3530 mm, Y=1700 mm, and Z=250 mm. It achieves speeds up to 60 m/min in X and Y, and 15 m/min in Z. Includes a mobile dust extractor Felder RL200, enhancing operational cleanliness and efficiency. Consider the opportunity to buy this Felder Format4 Profit 2.s CNC processing center. Contact us for more information about this machine. Application Types CNC Wood Machining Iijdpfxex D Hqnj Aa Eok

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Equipment and technical data: - Maximum volume flow: approx. 3,200 m³/h - Nominal volume flow: 1,750 m³/h - Negative pressure: approx. 1,120 Pa - Filter area: approx. 10 m² - Collection container: total volume approx. 400 liters - Extraction connection diameter: 160 mm - Motor power: 3.0 kW - Voltage: 3 × 400 V, 50 Hz - Phases: 3N - CE marking Dimensions: approx. 1,775 × 898 × 2,005 mm Weight: approx. 320 kg Availability: short-term Ijdpfjx Enr Eex Aa Esik Location: 63934 Röllbach

Year of construction: 2021, condition: ready for operation (used), This Felder RL 300 was manufactured in 2021. It features a new extraction system, never used, with a maximum volume flow of 6000 m3/h and a nominal volume flow at 20 m/s of 5090 m3/h. The machine includes a filter area of 50 m2 and dual 250-liter chip collection containers. Sound pressure level is at 75 dB. For more information about this machine, please reach out to us. Application Types Other Woodworking Machinery Iodpox D Ex Refx Aa Esik

Year of construction: 2021, condition: ready for operation (used), Main Drive Iodpfxsx D D Hmj Aa Eoik Number of axis 4 Movement X-Axis Movement 4000 mm Z-Axis Movement 500 mm Y-Axis Movement 1670 mm This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. Application Types CNC Wood Machining

Year of construction: 2020, condition: ready for operation (used), Technical Specification Iisdpfox D D Scox Aa Eek Max. Cutting Length 5300 mm Max. Cutting Depth 80 mm This Felder Format 4 Kappa V80 panel saw was manufactured in 2020. It features a powerful 5.5 kW motor, a saw blade diameter of 300 mm, and can handle cutting lengths up to 5300 mm and heights up to 2200 mm. Ideal for precise large-scale panel cutting. Contact us for more information about this machine. Application Types Sawing (Wood)

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Diamond cutter and glue roller newly installed. Isdex D Rklspfx Aa Esik This FELDER MG580 edgebander was manufactured in 2010. Ideal for precise edge banding applications, it represents a reliable choice for enhancing your woodworking operations. Contact us for more information. Application Types Edge Banding