Used Felder G 560 for sale (120)

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Location: Supplier Bsdoxta Dyopfx Adxoww

Condition: good (used), Year of construction: 2013, Panel saw Felder K 975 Cutting length: 3200 mm Cutting width: 1350 mm Max. cutting height: 130 mm (saw blade diameter: 400 mm) Saw blade and scorer tilting: 0-45° digital Saw blade and scorer height adjustment: digital Manual adjustable rip fence Activation of main saw blade and scorer from control panel and/or machine table Main motor for panel saw: 5.5 kW (7.5 HP) (adjustable 3500/4500/5500 rpm) Bedpexl Dw Uefx Adxeww Scorer motor for panel saw

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 80-03/224-02, power: 4 kW (5.44 HP), pivoting range: 45 °, Tilting spindle moulder milling machine Bedpfx Aoxp Rmkjdxsww

Condition: good (used), Year of construction: 2010, Fully functional Bwsdsxqgr Sspfx Adxew Year of manufacture: 2010 Radius scraper blade Flat scraper blade Cleaning unit Jointing cutter up to 3 mm Nesting milling unit Pneumatic feed stop Polishing Machine no.: 200.07.011.10

Condition: excellent (used), Year of construction: 2023, Single-sided edge banding machine Make: Felder / Format 4 Model: Tempora 45.03 L Year of manufacture: 2023 Edge bander with pre-milling unit Edge thickness: 0.4 - 3 mm Workpiece thickness: 8 - 45 mm Pre-milling unit Gluing station for PUR/EVA End trimming saw unit Flush/radius milling unit Corner rounding unit Cleaning spray unit Buffing unit Bodpsxrbkfefx Adxjww Control unit: Smarttouch 15" touchscreen Set-up length approx. 4300 mm Total connected load: 14.5 kW Voltage: 400 V, 50 Hz, 3-phase, 22.8 A

Condition: excellent (used), Year of construction: 1997, operating hours: 18,546 h, functionality: fully functional, machine/vehicle number: BF6-31, For sale: Combined woodworking machine Felder BF6-31 from 1997 (three-phase). Bodpexr A H Isfx Adxoww The machine is designed to integrate a table saw, spindle moulder, planer, and thicknesser. It features a sliding table for the table saw. The arrangement of the tools can be adjusted according to the type of operation. The machine is in good condition, has been cleaned, and partially lubricated. The internal duct of the dust extraction system has been replaced. There is some surface rust, mostly around the saw blade. The thicknesser knives have been replaced with discontinued Felder knives. Both the table saw and the spindle moulder/planer are working properly. Watch the video for more information!

Condition: used, Year of construction: 2016, Sliding table 2800 mm, cutting width 1250 mm, controlled parallel fence, kappa 400 X, tilting saw unit 45°, saw blade diameter: 250 - 400 mm, max. cutting height: 133 mm, electric height adjustment, motor 5.5 kW, 3 speeds: 3500/4500/7500 rpm. X Motion screen control (touch function) at eye level, additional scoring function, easy-lock quick-change system for main saw blade. Location: Supplier Bwsdpfx Ajxta Dmedxow

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Bwjdpexlt Shefx Adxsw Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Diamond cutter and glue roller newly installed. Bodpfjxnd Ilex Adxsww This FELDER MG580 edgebander was manufactured in 2010. Ideal for precise edge banding applications, it represents a reliable choice for enhancing your woodworking operations. Contact us for more information. Application Types Edge Banding

Condition: good (used), Year of construction: 1992, Vertical bandsaw Manufacturer: verm. fields Year of manufacture: 1992 Type / Model: FBV 400 (?) Machine number: 62 Table: 780 x 600 mm Table inclination: Projection: 430 mm Roller diameter: 420 mm passage height: 260 mm Saw band: mm Band speed: 0 to 180 m/min Bodpfjh S Dmfsx Adxoww Connection: Accessories/equipment: Band welder Condition: good Weight: 0,7 t Footprint: 830 x 930 mm Dimensions: 1.100 x 1.100 x 2.100 mm Unfortunately, the exact specifications are not recognizable and there is no documentation included.

Condition: used, Used machine Data to follow Bsdoxllw Nopfx Adxoww

Condition: as good as new (ex-display), functionality: fully functional, table length: 2,200 mm, table width: 800 mm, height adjustment type: electric, table height adjustment: 300 mm, grinding belt length: 5,750 mm, grinding belt width: 150 mm, overall weight: 650 kg, input frequency: 50 Hz, power: 2.94 kW (4.00 HP), input voltage: 400 V, grinding belt speed: 25,000 mm/s, grinding height: 600 mm, Further technical data Extraction connection: 160 / 140 mm Feed speed: 4 - 16 m/min With the FS 722 belt sanding machine from Felder, you can process workpieces up to 4300 mm in length effortlessly. Aluminum belt rollers, the professional sanding pad, and the frame sanding device are already included in the standard version at no extra cost. Bodoxtpplepfx Adxsww Standard equipment: - Frame sanding device - Professional sanding pad - Aluminum belt rollers - Thickness table adjustment precise to tenths of a millimeter with handwheel and integrated digital display - Steel infeed roller - Steel outfeed roller, micro-serrated - Spring-loaded segmented pressure beam on infeed side

Condition: used, Year of construction: 2017, Fw 1102 Perform Year of manufacture: 2017 5 operating hours Bsdpoxrwn Tjfx Adxsww 15 kW motor with brake Electric table height adjustment Continuously variable feed 2.5 – 18 m/min Sanding height: 3 – 170 mm Abrasive belt dimensions: 1120 x 1900 mm Belt blowing, timer-controlled Sanding width: 1100 mm Extraction connection: 2 x 160 mm and 1 x 120 mm Vacuum carpet with integrated blower in the machine frame 1st unit: rubber-coated profiled contact roller 2nd unit: electro-pneumatic segmented sanding pad, 25 mm segment width, for veneer sanding work With lacquer sanding, digital grit compensation Pneumatic sanding belt oscillation Roller table extension on both sides Scotch-Brite brush unit at the machine outlet, 150 mm diameter Electronic sanding belt run monitoring Includes 30 sanding belts

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW 5 spindle speeds 3500-10000 rpm Milling spindle tilting 0-45° Sliding table length 1300 mm Electric height and tilt adjustment Electrically adjustable milling fence Milling fence completely foldable Max. tool diameter 250 mm Fence jaws aluminium 550 mm Bedpfxsxbq Ule Adxeww Centrex milling guard Weight approx. 700 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total length: 2,800 mm, workpiece height (max.): 45 mm, edge thickness (max.): 5 mm, input voltage: 400 V, working height: 900 mm, chip removal: 2 mm, Special Price!! Felder Edge Bander – As New, Exceptionally Maintained, Year of Manufacture 2022, Commissioned 2023 We are selling our Felder edge banding machine from 2023, which is in like-new, exceptionally well-maintained condition. The machine was delivered new and put into operation in May 2023 and has since operated reliably, precisely, and without faults. It is single-owner and has been serviced exclusively by Felder’s own technicians. Sale only due to upgrading to a larger model. ⸻ Technical Details & Condition • Year of manufacture / delivery: May 2023 • Single-owner – purchased directly from Felder • Regular service by Felder • Exceptionally maintained, immediately ready for use • Can be inspected and tested under power ⸻ ⚙️ Features & Upgrades • Fence extension installed → allows single-person edging of long workpieces • Additional brush rows before the unit → perfectly remove dust and edge trimmings • Result: Clean, precise edges with a perfect radius on every workpiece Bjdpfexq Tkzsx Adxeww • Runs quietly, precisely, and reliably – ready for immediate use ⸻ ✅ Key Advantages at a Glance • Machine has seen very little use, therefore nearly as new • No investment required – ready to operate immediately • Exceptionally well-maintained condition, directly from a woodworking shop • Ideal for small to medium-sized companies that value quality and precision 2 x Glue Pots: one for transparent glue and one for white, but can also be filled with other colors. ⸻ Location: 73650 Winterbach Price: €14,900 net, VAT can be shown separately. Contact: mRube Montage und Bauservice Viewing and test run available at any time by arrangement. Machine must be collected – just set it up and start working!

Condition: used, Year of construction: 2012, functionality: fully functional, Felder clean air extraction system Type: RL 200 - Suction nozzle: 200 mm - Motor power: 4.0 kW - Double container Max. air volume flow: 4000 m³/h Rated air volume flow: 20 m/s, 2262 m³/h Negative pressure: 2680 Pa Filter surface area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Bjdpfoxuir Aex Adxjww

Condition: used, Felder FS-2200 Long Belt Sander Long belt sander with professional sanding shoe Table size: 2200 mm x 800 mm Table height adjustment: 300 mm Offset machine stand Work area lighting Removable center section in sanding table for frame parts and drawers Bedjxtbg Aopfx Adxeww Frame sanding: 500 x 700 mm Frame sanding height: 600 mm Sanding belt: 6300 x 150 mm Motor power: 3 kW Extraction connection: Ø160 mm Machine length: 3200 mm Year of manufacture: 1994 Machine is FULLY OPERATIONAL and in GOOD CONDITION Price ex-site, net: €1,800.00

Condition: excellent (used), Year of construction: 2022, Tilting spindle moulder with sliding table FELDER Model F 700 Z Sliding table length: 1000 mm Motor power: 5.5 kW Bwedpfxjwu D A Es Adxjw Motor voltage: 3 x 400 V, 50 Hz Spindle tilting range: 90 - 45 degrees Spindle diameter: 30 mm Spindle speed: 3500/6500/8000/10000 rpm Table opening: 230 mm Extraction port diameter: 120/80 mm CE Note for used machines: • Errors in technical specifications and prior sale excepted. • Listed prices are ex-location – free loading! • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty. Buyers are welcome to inspect the machines at the location. • Special agreements only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: used, Year of construction: 2022, functionality: fully functional, Dual 51 Bwjdpsxrwntofx Adxsw Year of manufacture: 2022 Silent Power spiral cutterhead 7.35 kW motor with brake Planing width: 505 mm Thickness planing capacity min. 3 mm, max. 255 mm Surface planer table length: 2250 mm Electric table height adjustment Infinitely variable feed: 4 – 16 m/min Max. cutting depth: 8 mm Extraction connection: 140 mm Tilting fence adjustable from 90 to 45 degrees Recess for pallet jack Operating manual Dimensions: 230 x 100 x 120 cm Weight: 900 kg

Condition: used, Year of construction: 2013, max. workpiece length 5.130 mm profile spindle 1 Stück main drive 18 kW Format 4 profit H30L e-motion CNC machining center ----- - Includes window tools and existing units - Includes Felder window design software "Flash Frame" and existing programming - Machine from a small business, in very good condition, only a few operating hours Machine can be viewed in operation until the beginning of December 2025! Technical description: ----- Working dimensions: X: 5,130 mm Y: 1,360 mm Z: 130 mm Travel paths: X: 6,050 mm Y: 1,790 mm Z: 280 mm - 4-axis milling spindle: 18 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Drilling head DH 20 6H1S: Vertical drilling unit with 14 spindles (9 spindles in X direction, 5 spindles in Y direction, grooving saw in X direction) - Disc changer with 24 tool positions. Max. work diameter 240 mm max. Tool height 370 mm - Side pick-up space for 2 tools/units Bwodpfx Ajxgu N Djdxjw Max. tool diameter 270 mm max. Tool height 270 mm - Mobile pick-up with space for chip deflector slide - Automatic table: 8 workpiece supports with e-motion position control - Vacuum pump 90 m³/h - 6 double x-motion or e-motion insertion aids - Chip conveyor belt - Double straight line laser, line laser for round-arch processing - Handheld terminal for remote control of the axes - Including all existing solid wood clamps and vacuum suction cups as well as horizontal clamps - Automatic central lubrication - CE safety device - Software: "Flash Frame", software for window and frame planning "WOODFLASH" Program editor with CAD function 3D simulator with collision check for Woodflash on the machine - Tools: Wooden windows IV 68, IV 78, IV 92 Front door IV 68, IV 78 Lift-sliding doors IV 68, IV 78, IV 92 Balcony doors IV 68, IV 78 Sale of tools in the condition, scope and with accessories as available in our warehouse. Note on window cuts, tool drawings, tool system listings: Engelfried does not guarantee that the tools actually available correspond to the systems mentioned and drawn. (Technical specifications according to the manufacturer - no guarantee!)

Condition: excellent (used), Catalogue number: 7531 TECHNICAL DATA Equipment: - Disc - Tape feeder - Guillotine - Glue tank (granulate) - 3 pressure rollers - Trimming unit with final saws - 2 milling units for edge shaping (radius cutters) - 2 polishers Minimum length of workpiece: 140mm Minimum width of workpiece: 60mm Thickness of the edged workpiece: 10-55mm Edgebanding tape thickness: 0.4-3mm Extendable support from the table Motor power: 5.6kW Bwodpfxsvtl Tqo Adxew Extraction port diameter: 120mm Dimensions (L/W/H): 3480x1050x1020mm Weight approx.: 900kg - Not repainted - Austrian manufacture - Year of production: 2007 - Condition: very good - Used edgebander Net price: 18,900 PLN Net price: 4,500 EUR Net price calculated with an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2023, functionality: fully functional, total length: 2,500 mm, total width: 1,060 mm, total height: 1,180 mm, filter area: 2 m², negative pressure: 550 Pa, volume flow: 3,600 m³/h, FELDER FSW 2000 mobile spray wall Bsdpfxsw Hcp Uj Adxeww 3x400V 50Hz, 1.1 kW, air flow rate 3600 m³/h, pressure increase 550 Pa, exhaust diameter 300 mm, outlet throttle valve D-300 mm to smooth exhaust airflow, dimensions 2500x1060x1180 mm Suitable only for water-based paints NEW including accessories as shown in the picture

Condition: used, Felder Format 4 Kappa 450 sliding table saw Heavy-duty precision sliding table saw Scoring unit 5.5 kW motor Saw blade tiltable from 90° to 46° Electric angle and height adjustment Saw blade diameter up to 450 mm Bwedpjxrl R Nofx Adxjw Trimming length 3200 mm Cutting width with parallel stop 1200 mm Year of manufacture 2005 CE-certified version Machine from carpentry liquidation/retirement in VERY GOOD CONDITION from carpentry shop

Condition: like new (used), Year of construction: 2022, functionality: fully functional, For sale is a Felder RL-160 clean air extraction unit with a maximum air flow rate of 3,200 m³/h. The extraction unit is in excellent condition and has been inspected and serviced by our specialists. (Fully functional) Technical data: Bwjdswp Rgmopfx Adxsw - Max. air flow rate: 3,200 m³/h - Filter surface: 10 m² - Extraction connection Ø: 160 mm - Manual filter cleaning - H3 dust tested - Year of manufacture: 2020 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: good (used), Year of construction: 2023, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. The extraction unit is in excellent condition and has been inspected and refurbished by our professional staff. (Fully functional) Technical data: - Max. airflow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Automatic filter cleaning - Antistatic filter - H3 dust tested Bwedpfxexnxm Ne Adxew - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: clean air unit, extraction unit, dust extraction, clean air, RL Reference: R-A0117