Used Feeder for sale (2,587)

Condition: good (used), UDA 150 S - carton feeder or sleeve feeder suitable for mounting a printer or label applicator - widely used in the pharma industry - appears to be in good condition - some spares with the machine and basic wiring details. Cpjdpfx Afsxyyz Esnju READY TO SHIP WORLDWIDE Export documentation and shipping available

Year of construction: 1999, condition: excellent (used), functionality: fully functional, For sale here is a Foellmer OK 90 strip insertion unit - Subtramat Cedegllp Hopfx Afnspu - Machine is on castors - Weight: 35 kg - Height adjustable for low or high deliveries - Power connection: 230V - Coupled to the printing press via cable - Strip length: 10 cm, cutting time is adjustable - Lance: 21 cm from the front edge of the machine - Lance height parallel to the ground approx. 70–140 cm (height can be easily adjusted using different tubes) - 5 rolls of insertion paper included

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 122, Cover folder feeder, Minimum case size: 140 x 308 mm, Maximum case size: 485 x 1002 mm, Maximum mechanical speed: 1,000 - 6,000 cycles/h, Minimum case weight: 200 g/m², Maximum case weight: 400 g/m² Cjdsx Apfrspfx Afnepu

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Cpjdjhlnzkopfx Afnou Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, roles: 3 speeds: stepless Cjdpjyffyfsfx Afnjpu

Condition: good (used), Year of construction: 2000, - Guide channel (oil-damped) - max. bar length 3,700 mm - included guide channel: D 36 mm - material pusher length L - centering device - last mounted on Gildemeister Twin 32 - weight approx. 1,000 kg - dimensions LxWxH 4,500x700x1,200 mm Accessories: Cjdpfxox Syn Se Afnopu various centering jaws various clamping sleeves

Condition: used, Year of construction: 2002, functionality: fully functional, Used Kora Packmat friction feeder. Originally supplied by Nodema to the only customer who used this feeder. Taken back in working condition and ready for use again. Cpodpjx Tuiaofx Afneu

Condition: excellent (used), Year of construction: 2011, Machine for dosing dry or liquid ingredients into liquid products such as ice cream or butter, consisting of a dosing unit, lamella transfer pump, horizontal mixer (for butter applications), and control cabinet. The hopper is fitted with a stainless-steel auger feeding the ingredients to the lamella pump; products may be dry or liquid provided sufficient viscosity. Capacity ranges from 200–4,000 l/h for liquid products and 20–400 l/h for dry products. The 70-liter hopper is mounted on three weighing/load cells. The system includes an inline horizontal mixer, is installed on a stainless-steel frame with adjustable feet, and all relevant components are suitable for CIP cleaning. The unit is equipped with two DN100 tri-clamp connections, supplied with documentation in French, and has no local operator panel as operation is centralized. Cpedpfx Afox Ttdcsnsu

Condition: used, Combination conveyor, fan with connection to the hopper, fan conveyor, combination conveyor, AirMove - components, injector conveyor, injection conveyor -Injector conveyor: injection conveyor with distributor, without fan -Inlet funnel: 175 x 180 mm -Distribution radius: 200 mm Cjdpjhg Rg Rofx Afnjpu -Discharge pipe: Ø 60 m -Drive motor: Euronorm 0.09 kW -Number: 3x conveyors available -Price per piece -Dimensions total: 1630/500 / H1230 mm -Weight: 57 kg

Condition: used, MIG/MAG hose package for robots -Hose package with: wire feed for robots or automatic welding machines Cpjdofdd A Dspfx Afnju -Length: 3.4 m -Water cooled -Weight: 5.5 kg

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones Cedpfx Afjma Dkfsnepu feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Condition: used, functionality: fully functional, Work surface: 1,400 x 5,000 mm Stainless steel lining Cjdpfx Afstpg A Eenspu Drive with 2 x 2.2 kW unbalance motors

Year of construction: 2000, condition: excellent (used), For sale: Professional closed powder feeder Sulzer Metco / Oerlikon Metco – model 9MPE-DJ (Closed Loop Powder Feed Unit). Cpjdpfsyg U Rvjx Afnsu The device is designed for precise and stable dosing of powders in thermal spray processes (HVOF, APS, plasma, etc.). Nameplate data: • Model / Type: 9MPE-DJ • Year of manufacture: 2000 • Power supply: 115 / 215 / 230 V • Frequency: 50 / 60 Hz • Power: 0.92 kW • Current: 4 A • Phase: single-phase Features and equipment: • Closed-loop powder feed control – excellent repeatability of dosing • Operator panel with display and membrane keypad • Precision carrier gas regulators (rotameters, pressure gauge) • Powder hopper/tank located at the bottom of the cabinet • Mobile housing on casters • Complete set as shown in the photos Technical condition: • Device is complete and well maintained • Normal signs of use consistent with age • Visible Oerlikon Metco service stickers (serviced in the past) • Was recently in use in an industrial installation Applications: • Thermal spray lines (HVOF, plasma, arc, flame) • R&D laboratories and industrial production • Precision dosing of metallic and ceramic powders

Condition: new, feeder 4 rollers roller DM 120 mm roller width 60 mm motor power 0,75 kW motor speed 1.400 U/ min feeder speed 3 - 18 m/min, variable weight approx. 37 kg without stand optional with stand ‘standard’ or ‘stand 1050’ Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Cpjdpsh Dikwefx Afnju

Condition: excellent (used), Year of construction: 2000, A receiving conveyor with steel hinged plate belt. It was most recently loaded using a wheel loader and a tipper truck. Overall length: 9.6 m Cpjdsiwxmbopfx Afnou Filling hopper dimensions: 8.0 x 3.6 m Conveyor width at bottom: 1.85 m Maximum width with drives: 3.2 m Conveyor belt width: 1.3 m Overall height: 5.3 m Belt speed: 0.05–0.29 m/min Conveyor chain: FV 315 with bushing and protected roller Throughput: 3 to 14 m³/min Belt gear motor SEW: 0.75 kW Speed: 0.2 rpm Torque: 18,000 Nm Reel shaft speed: 64 rpm Reel gear motor Flender: 7.5 kW Total weight: approx. 20 tonnes With steep-angle conveyor belt

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, *complete with SKAKOTROL control-unit C 400* volume: 700 Kg. loading capacity: max. 500 Kg. Cpjdpfx Ajwhqkcjfnou

Condition: used, Year of construction: 2022, - FANUC 0i-TF CNC Control - 60° slant bed - Cross slide with linear guides - Part separator - Coolant unit - Chip conveyor - Power on time: 2775 h - Machining time: 743 h - Year of manufacture: 2022 LNS Sprint 552 - Bar feeder - Bar diameter: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar capacity diameter: 32 mm - Max. spindle speed: 5000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Working area: - Workpiece diameter/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Cross slide "Gang Type": - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank diameter: 20 mm - Tool holder (square): 12 x 12 mm Coolant system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Power 100%/40% DC: 3.7 / 4.4 kW - Torque: 20.2 Nm - Energy consumption: 5.4 kWh - Total power: 8.8 kW Cpedpfswrp Dpsx Afnou - Operating voltage: 400 V - Rated current: 16 A Dimensions & weight: - Footprint: 1900 x 1030 mm - Weight: 1230 kg

Year of construction: 2016, condition: excellent (used), 1 used short bar loader make Breuning type ILS RBL 80/12 Year 2016 clamping range 5-80 mm diameter Length 100-1200 mm Cjdpfx Afsht Rl Eenjpu

Condition: used, Bar Feeder, Automatic Bar Feeder, Used Machine Manufacturer: IEMCA Model: Master 100 F/R Overall Dimensions: Width: 4900 mm Depth: 1115 mm Height: 1800 mm Weight: 2200 kg Year of Manufacture: 2012 Electrical Data: 400V; 8.4A Bar Diameter Range: 10–100 mm Bar Length: 1100–4200 mm Maximum Bar Weight: 180 kg Maximum Feeding Speed: 500 mm/sec Magazine Types: UP: 500 mm usable length Cpsdpexab Adsfx Afnju MP: 290–330 mm F: 2.5-ton stacked magazine Changeover Time: 31 seconds Installed Power: 1.5–3 kW Pneumatic System Pressure: 6 bar

Condition: good (used), Year of construction: 2005, functionality: fully functional, Computer renewed Software WIN 7 Feeder package: Single feeders: 30 pcs 8mm tape 20 pcs 12mm tape 6 pcs 16mm tape 5 pcs 24mm tape Block feeders: 3 pcs 10x8mm tape Cpodsx Sd Icspfx Afnju Tube feeders (via compressed air): 1 pc 20-position 3 pcs 10-position various spare parts

Condition: used, functionality: fully functional, TECHNICAL SPECIFICATIONS: - Min. workpiece length: 400 mm - Max. length: 6000 mm - Max. workpiece width: 200 mm - Max. workpiece thickness: 200 mm - Roller motor power: 0.75 kW - Chain motor power: 1.1 kW - Feed rate adjustable via geared motor - Roller speed: 19 - 118 m/min - Belt speed: 10 - 60 m/min - 8 guiding belts - 17 steel feed rollers - Roller diameter: 80 mm - Roller height from base: 900 mm - Pneumatic pressing Cedpfxexfgpgo Afnopu - Dimensions (L/W/H): 565 / 175 / 120 cm - Weight: ~ 1500 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch Cpjdpfx Afjx I Icvsnou -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 600/500/H130 mm -Weight: 6 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 590/500/H150 mm Cpodpjx I H Rxjfx Afneu -Weight: 8.3 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ 2-304 -Length: 8.5 m Cpodpfx Aox I E U Aofnsu -Connector: 5-pin -Transport dimensions: 580/450/H130 mm -Weight: 7.1 kg

Condition: good (used), MIG/MAG hose package for robot Csdpfx Asfc T Tujfnepu -Hose package with: wire feeder for robots or welding machines -Length: 2.5 m -Water cooled -Number: 2 wire feeders available -Price: per piece -Weight: 5.5 kg