Used Feeder for sale (2,577)

Condition: refurbished (used), Year of construction: 2007, Looking to expand your existing Buhrs ITM (Winkler+Dunnebier) W+D envelope inserter with more feeders? We have all Buhrs ITM feeders available! The Buhrs / Winkler and Dunnebier AT25rotary and HF3 friction feeder are developed to be installed on the Buhrs-ITM BB300 envelope inserting systems The Buhrs / Winkler and Dunnebier HF2 friction and the RF2 vacuum rotary feeder are developed for the Buhrs-ITM BB600 and the Buhrs BB700 envelope inserting systems. The Buhrs RF2 vacuum rotary feeder can be retrofitted on most BB600 and all BB700 LL envelope inserting systems in the market The RF2 vacuum rotary will seperate the material with three suction cups and has bottom fed. This feeder is capable to feed material with high speeds. We have the following feeders available! Kjdpeq Ec Rgefx Amrslu AT25 Vakuum rotary feeder (BB300) AS25 Shuttle feeder (BB300) HF3 vakuum friction feeder (BB300) RF2 Servo vacuum rotary feeder (BB600 and BB700) AS2 Shuttle feeder (BB600 and BB700) HF2 Vacuum friction feeder (BB600 and BB700) All feeders we offer for sale are completely checked and tested. All parts which need to be replaced are new. We have multiple of the Buhrs ITM / Winkler & Dunnebier feeders available. Contact us for a quote.

Condition: refurbished (used), Year of construction: 2005, We have a Buhrs ITM CS400 servo gathreing section available. Is your current machine to short? With this gathering section you will get 6 stations extra directly. Year of built 2005 but not used that often. We do selll this gahering section after complete maintenance and with maintained feeder. You have the choice between rotary and fiction feeders which you can place on the base. Kjdpfx Aeq T Nvcsmrjlu

Year of construction: 2005, condition: like new (used), We have a Buhrs ITM CS400 servo gathreing section available. Is your current machine to short? With this gathering section you will get 6 stations extra directly. Year of built 2005 but not used that often. We do selll this gahering section after complete maintenance and with maintained feeder. You have the choice between rotary and fiction feeders which you can place on the base. Klsdjmuzuajpfx Amreu

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 122, Cover folder feeder, Minimum case size: 140 x 308 mm, Maximum case size: 485 x 1002 mm, Maximum mechanical speed: 1,000 - 6,000 cycles/h, Minimum case weight: 200 g/m², Maximum case weight: 400 g/m² Kledpfxjx Apfro Amrou

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 72.250/01, saw blade diameter: 125 mm, saw drive: 1,500 W, PLC control: MAGELIiS 125 mm saw blade Motor power: 1.5 kW Saw feed rate: 0-20 mm/min Cutting speed: 15 - 170 m/min (steel) 630 - 1885 m/min (non-ferrous metals) Max. working area: 70x40 mm (steel) Max. working area: 60x40 mm (non-ferrous metals) Circular working range: 5 - 70 mm (steel) Circular working range: 5 - 50 mm (non-ferrous metal) Feed length: 5 - 500 mm 5-9999 (multi-step) Max. feed speed: 500 mm/s Weight (saw): approx. 610 kg Klsdpoy U Na Ajfx Amrju Dimensions (length x width x height) (saw): approx. 2500 mm x 1000 mm x 2000 mm Automatic bar feeder. NOTE If the Buyer decides to purchase this machine, the Seller will disassemble the machine and load it onto the provided transport vehicle free of charge!

Condition: good (used), Machine type: Vibratory bowl feeder / Parts feeding systems Design: Bowl feeders and linear tracks Version: Multiple feeding systems available Conveying system: Vibratory bowl feeder with linear track Feeding unit material: Stainless steel / Metal construction Function: Automatic feeding and orientation of plastic parts Application area: Injection molding automation / Assembly systems / Packaging lines Buffering system: Bowl container for parts storage Integration: Component of automated production lines CE marking: Available Further information, technical specifications, and quantity upon request. Kjdpfxeytqgmj Amrslu

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: foot pedal Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct Kljdsx R Dh Hspfx Amrou   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules Klodpfjx R Df Ssx Amrou   Manual electric screwdriver Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right Klsdpfxshlnzkj Amrsu space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Kodpfxox Tdpio Amrolu Description: - Horizontal signature feeders: 1 - Incl chain track - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 - Incl chain track Kodpfex Tdn Sox Amrslu - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Kodpfxsx Tdn Ej Amrjlu Year: 2004 Description: - Horizontal signature feeders: 1 - Incl chain track - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Kedpfxex Tdnxj Amrolu Year: 2004 Description: - Horizontal signature feeders: 1 - Incl chain track - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 - Incl chain track Kedpfx Aex Tdmusmrelu - Excl. chain - Excluding pump(s)

Condition: excellent (used), Year of construction: 2000, A feed conveyor with steel hinge plate belt. It was last loaded using a wheel loader and tipper truck. Overall structural length: 9.6 m Hopper size: 8.0 x 3.6 m Conveyor width at the bottom: 1.85 m Maximum width with drives: 3.2 m Conveyor belt width: 1.3 m Overall height: 5.3 m Belt speed: 0.05–0.29 m/min Conveyor chain: FV 315 with bushing and wear-resistant roller Throughput capacity: 3 to 14 m³/hour Belt geared motor SEW: 0.75 kW Speed: 0.2 rpm Torque: 18,000 Nm Klsdsiwxmbopfx Amreu Reel shaft speed: 64 rpm Reel geared motor Flender: 7.5 kW Total weight: approx. 20 tonnes With steep conveyor belt included.

Condition: used, URANIA DSK Ksdpfx Amow R Eqborjlu Maximum paper size: 80 × 112 cm Minimum paper size: 30 × 42 cm • Frame opening (normal): 78.5 × 108.5

Condition: good (used), Year of construction: 2003, for bar diameter 5 - 65 mm Feed force: max. 550 N was installed on Index G 200 Kledpfeyrgv Ujx Amrju

Condition: refurbished (used), Scraper for chips/wood chips Carrier width: 640 mm Straight section: 4 m Inclined section: 4 m Completely overhauled Kodpfjy R Ugyex Amrelu

Condition: used, Year of construction: 1996, Victor Vturn-20 CNC turning centre, 10 station tool holder, Fanuc Series 0-T CNC, swarf conveyor, fitted air bench, with Hydrafeed Multifeed MLI bar feeder, serial no. 2766 (1996) Kjdpfeyhw U Dox Amrslu

Condition: good (used), functionality: fully functional, “4 Pcs. AEG OA 1750 / 900 – AS – GY” for Sale Manufacturer: AEG Type: OA 1750 / 900 – AS – GY Size: 1.750 x 900 (750)mm Klsdpou Tkrasfx Amreu Magnetic Vibrator: MV G (8 kW) / MV 400 (7 kW) Thyristor controller: Included Frame: With/Without With Stainless steel wear plate.

Condition: like new (used), 100 Pcs. Feeders with Magnetic Vibrators and Unbalance Motors. Find our complete stock on our website. Different widths and lengths. Ksdpfx Amsggfizsrelu With different vibrators from quality manufacturers like Aviteq / AEG, Jöst, Friedrich, UHDE, Vibra, Honert, Herweg. Also in stainless steel or for example covered with ceramic or rubber. Please contact us to find a suitable feeder for you.

Condition: like new (used), functionality: fully functional, Used Brabender twin-screw feeder type DDW-H21-M-DDS20-50R • Year of manufacture: 1993 Kodpfxsyfm Sps Amrelu • Throughput range: 5 – 50 kg/h • Integrated agitator / paddle system in the hopper (as shown in the photos) • Stainless steel hopper • Twin-screw design The feeder is in good condition, complete, and ready for immediate use. Ideal for powders, granulates, and poorly flowing bulk materials.

Condition: like new (used), functionality: fully functional, As-new twin-screw volumetric feeder As shown in the photos, the unit features: • Twin screws with approx. 45 mm diameter • Integrated paddle mechanism (agitator) inside the hopper Klsdpfxeyfm Epe Amrsu • Rectangular hopper with stainless steel liner • Driven by a 0.55 kW electric motor The feeder is in as-new condition and fully functional. Ideal for powders, granulates, or difficult-to-flow bulk materials.

Condition: excellent (used), functionality: fully functional, Brand: Nawi / Newtec Scale type: Newtec 2012 Number of weighing channels: 12 lines Weighing range: up to 2000 grams Component specifications: Kedpfx Aoyku I Aomrolu - Bucket tipper: with chain feed conveyor (track width 850 mm, length 2000 mm) - Screw conveyor with discharge conveyor: screw diameter Ø 400 mm, length 4500 mm, discharge height 1500 mm - Infeed hopper: opening approx. 1100 x 1300 mm Floor passage is not included. The professional weighing and packing line by Nawi / Newtec is an advanced stainless steel system dedicated to precise portioning and transportation of products in the food processing industry. The heart of the set is a 12-channel Newtec scale, enabling fast and accurate weighing of portions up to 2 kg. The system is designed for full automation – from raw material loading with the bucket tipper, through efficient screw conveying, up to final weighing.

Condition: used, The device is in working order and ready for use. Feed width: 1500 mm Height: 1000 - 1300 mm Kedpfjy Ua Hmsx Amrjlu Length: 1500 mm Discharge height: 950 mm Belt width: 250 mm Height of scrapers: 10 mm Depth: 900 mm Please check my other listings.