Steep screw conveyor, screw tube stainless steel
Factory new screw helix mild steel, factory new bearing with plug screw
With drainage area, screen approx. 2,5 mm perforation
Motor 4,00 kW, 53 rpm
Screw helix diameter 560 mm, length 7540 mm, clear length of screw tube 7570 mm
Inlet 900 long x 740 mm wide
Outlet 400 mm diameter
Ci39fxhz7g
Previously used for shredded plastic waste
Hinged belt conveyor with WAVE-BELT system
No hinge - low wear
With conventional hinged belts, chips and dirt can become
chips and dirt can get stuck in the hinges.
The WAVE-BELT system does not require hinges on the top
B3gvdb9q
on the top of the hinge and is smooth in this area.
smooth. Chips and dirt cannot get trapped.
jam. Due to the "WAVE-FORM" of the belt plates
there is hardly any gap between the plates.
This makes the hinged belts tighter, more durable
and requires less maintenance.
...
Second hand double screw conveyor
Make : MECADO
Type : D500 x 6000
Year of manufacture : 2018
Condition : as is where is
Screw diameter : 2 x 500 mm
Trough length : 6000 mm
Trough width : 1150 mm
Trough height : 6000 mm
Main motor size : 22 kW
Rdvjn
Main motor incl. : yes
Voltage : 230 / 400 V
Frequency : 50 HZ
Measurements approx. : 8400 x 1650 x 1000 mm
Infeed opening: 800 x 1150 mm
Outfeed opening: 800 x 1150 mm
A receiving conveyor with steel hinged plate belt.
Was last fed with wheel loader.
Total length of construction: 9.4m
Size of feeding hopper: 8,0 x 3,6m
Width of conveyor at the bottom: 1,85 m
width of conveyor belt: 1,3m
Total construction height: 5,3m
F33k28b
Gear motor SEW: 0,75 kW
speed: 0,2rpm
Torque: 18000 Nm
With steep conveyor belt
Long grass metering conveyor in industrial design,
Yzxiruwj
with stone separator, ideal as feeder belt for
silage chopper or for conveying hay.
Very stable and efficient, thanks to annual maintenance.
L/W/H = 12300 mm x 2500 mm x 4550 mm
1.5 kW from Bauknecht
3.0 KW from SEW Eurodrive
2.5 KW from Bockwoldt/Oldisloe
Chassis and lifting arms in stainless steel. This mobile unit can handle drums and similar containers with a maximum diameter of 500 mm and a maximum weight of 250 kg. Possible to fit other grippers for other devices. (not included) New battery required.
Cg3fg7wjge
Der landgestützte Eimerkettenbagger bewegt sich während des Abbaus gleichmäßig längs einer Böschung auf Raupen.
Die Baggertiefe wird von der Länge der Eimerleiter, dem Durchhang der Eimerkette, dem Eigengewicht des Baggerwagens sowie dem zulässigen Böschungswinkel vor dem Standplatz begrenzt.
Die nach unten geneigte Eimerleiter dient als Tragkonstruktion, um die sich eine endlose, durchhängende Kette mit aufmontierten Eimern bewegt.
Das Baggergut wird im frei durchhängenden, nicht geführten U...
Trough screw conveyor DN 400 x 13.000 mm
- Mechanical conveying
- Bulk materials such as powder, granules or short fibers (biomass)
- Ideal for bulk materials from free to normal flowing
- Trough screw conveyor made of welded structural steel
- Solid blade screw conveyor
- Ø 400 mm
- Pitch: approx. 420 mm
- inlet: approx. 400 x 600 mm
- center inlet to outlet: approx. 12,500 mm
- Outlet approx. 400 x 400 mm, with flange
- External bearings on both sides with shaft sealing
- no aspiration c...
Conveyor belt: hydraulic folding in and out
Scraper: front and rear scraper
Conveyor belt length: 25.000 mm
Engine: Caterpillar 4.4 Fixid Speed Engine 133 HP
Crawler track: floor plates 400 mm
Discharge height 22,5° / 27,5°: 8.8200 / 11.000 mm
Conveyor belt width: 1.200 mm
Qzthp
Feed hopper: Capacity 8 m³
Your contact person in our home:
Mr: André evening
Mr: Marcel Brahms
Mr: Simon blank
We offer a new climbing belt conveyor for sale here.
In stock: NL
Included in the scope of delivery:
01 x climbing belt conveyor, new
Discharge height: 2000 mm
Band width: 520 mm
Usable width: 320 mm
Drive: drum motor
Material color: Green
Band with studs & wave edge (height 40 mm)
-incl. stand works & wheels
-without E-connection
Our services at a glance:
(Prices on request)
Installation, construction
o...
Trough screw conveyor DN 400 x 11.400 mm
- Mechanical conveyance
- Bulk goods such as powder, granulate or short fibers (biomass)
- Ideal for bulk goods from free to normal flowing
- Trough screw conveyor made of welded carbon steel
- Full-leaf worm shaft
- Ø 400 mm
- Thread: approx. 420 mm
- Inlet dimension: approx. 400 x 600 mm
- Middle inlet to outlet: approx. 10.800 mm
- Spout approx. 400 x 400 mm, with flange
Jq29hna9
- External bearings on both sides with shaft seals
- Without exhaus...
Screw conveyor type SF D 160 with a diameter of 125 mm, a length of 5,000 mm and a power of 1.5 kW. Material: steel. For further information please contact the supplier.
Bixrlmc0sz
Trough screw conveyor Ottevanger DN 250 x 1.000 mm
- Mechanical conveyance
- Bulk goods such as powder, granulate or short fibers (biomass)
- Ideal for bulk goods from free to normal flowing
- Trough screw conveyor made of welded carbon steel
- Full-leaf worm shaft
- Ø 250 mm
- Thread: 150 - 220 mm
B3v70jd
- Inlet dimension: approx. 320 x 1.200 mm
- Middle inlet to outlet: approx. 1.000 mm
- Spout approx. 300 x 300 mm, with flange
- External bearings on both sides with shaft seals
- Exhaus...
For sale are 8 pieces of air cannons for silo loosening.
Caatbh0twg
Manufacturer: Martin Engineering
Capacity: 50 liters
Operating pressure: 8 bar
Year of manufacture: 2002
3 pieces
Capacity: 25 liters
Operating pressure: 10 bar
Year of manufacture: 2011
2 pcs travelling screws (l = je ~ 15 m) with counter bearings
Cbtj2p8upp
1 pcs motor 250 kW
racks
for 2 pcs rectangular silo: each 70,5 (l) x 14,53 (w) m - silos not included
Rotary blowers with OMEGA profile from KAESER impress with their enduring robustness. Thanks to their universal design, the blower systems are not only individually configurable and easily expandable, but are also characterized by easy maintainability and handling.
Bgbuyckv
Conveying screw with a diameter of 160 mm, a length of 3,043 mm and a motor with 2.2 kW. Material: steel. For further information please contact the supplier.
Bixrdbb7b7
Stainless steel pre-tank with progressive screw discharge
1. Stainless steel worm shaft and thread
- Worm thread completely refurbished
- Bearings are replaced
- Drive power is designed for the respective product and application
- Dimensions:
- Width under pre-tank: 500 mm
- Outlet: 320 mm
- Overall length: 4.300 mm
2. Reservoir
- Pre-container is blasted glass bead
Pryov
- Seals are replaced
Water-cooled trough screw for ash discharge from boiler.
1-shaft screw dryer
Screw heat exchanger
Trough width: 440 mm
Trough length: 5600 mm
Total length with gear motor: 9750 mm
Length to shaft end coupling: 8260 mm
Outlet: 200 x 300 mm
Delivery volume: 1m³/h
Grain size: 0-1mm and coarse pieces up to 50 mm
Product temp. on: 900°C
Product temp. off: 250°C
Material screw: 1.5415
Material trough: 1.5415
Operating pressure screw: 2 bar
Operating pressure trough: 2 bar
Total weight with gear motor ...
Screw conveyor type SF D 200 of the German manufacturer AMANDUS KAHL with a diameter of 200 mm, a length of 4,500 mm and left-hand thread. Offset geared motor with 3.0 kW. Material: structural steel. For further information please contact the supplier.
Nz2oh
Type of conveyor belt: belt with carrier
- Carrier shape: V-shape
Yt8uk8
- Effective working width: 700 mm
- Drive and return station
- Main switch
- Without supporting structure
- Conveyor speed: 1,6 m/s
- Motor:
- Brand Rulmeca, type 220 M
- 3 kW, 400 V, 50 Hz
- Isolationclass F
Rotary valve ZSV 320 - 21 - LU
Hole pattern inlet and outlet DN 300 PN 10,
Overall height 530 mm,
Housing made of material RSt 37-2 (1.0038),
with a large inspection opening in the cellular wheel area,
Nozzle 1" on empty side of the cellular wheel housing,
Inner surfaces of the housing with wear protection layer
Hardness > 52 HRC, intermediate layer (tungsten), hardness 70 HRC
produced by means of an application process, layer thickness approx. 2 mm
Cellular wheel Ø 320 made of material RSt 37-2...
Screw conveyor type SF 400 with a diameter of 400 mm, a length of 6,200 mm and a power of 2.2 kW. Screw shaft with right-hand thread. Pitch 350 mm, length (centre inlet to centre outlet) 6,200 mm. Material: steel. For further information please contact the supplier.
Bixpqci2as
Bucket Elevator - L_M_B
- Tension station with return pulley
S2mlzry
- Side sheet removeable for maintenance
- Chute dimensions:: 315 x 380 mm
- Inlet diameter: DN 200
1 piece bunker conveyor.
Were used for wood chips.
Content volume: 28 m³
Height upper edge hopper: 4800mm
Length hopper: 4000 mm
Width hopper: 4000 mm
Height hopper: 3200 mm
Sheet thickness hopper: 5 mm
Betepvczch
Hopper can be disassembled into 4 parts.
Disassembly and loading will be done by us.
!!! If necessary, the conveyor belt can be purchased with !!!
Belt width: 800 mm
Length belt: 34 meters
Drive via drum motor
Screw conveyor SF D 315 with a 4.0 kW offset geared motor. Capacity: 35 m³/h at 80 Hz, 22 m³/h at 50 Hz and 9 m³/h at 20 Hz. For further information please contact the supplier.
Nztlf
Trough Screw Conveyor - 4x DN 250 x 4000
- Mechanical conveyance
- Bulk solid materials such as powder, granulate or short fibers
(biomass)
- Ideal for bulk solid materials from free to normal flowing
- Trough screw conveyor made of welded carbon steel
- Full-leaf thread
- Ø 250mm
- Incline: 100 mm
- Shaft degressively towards the outlet
- Middle inlet to outlet: approx. 4.000 mm
- Spout 1.200 x 400 mm
- External bearing with shaft seal
- Without drive unit (motor and frequency conve...
Proportioning screw with a diameter of 200 mm, a length of 2,000 mm and a power of 2.2 kW (offset geared motor). Special feature: special inlet thread. Material: steel. For further information please contact the supplier.
Endeskj
Pre-bin with dosing screw
- Volume: approx. 1,5 m³
- Opening: 1.000 mm x 2.000 mm (can be closed with two lids)
Bzdbzuvqwv
- Agitator to keep the material in movement and to avoid material
bridges
- Dosing screw DN 160, length approx. 2.300 mm, suitable for
frequency converter
- function approved
- A general refurbishment is possible on request, consisting of:
- Check of bearings and seals, replacement if necessary
- Sandblasting
- Painting or powder coating
Screw conveyor of the German manufacturer AMANDUS KAHL with a diameter of 200 mm, a length of 2,650 mm and a power of 1.5 kW. Material: steel.
For further information please contact the supplier.
Tng0qae
Hammer mill trough screw conveyor DN 350 x 5.000 mm
- Mechanical conveyance
- Bulk solid materials such as powder, granulate or short fibers
(biomass)
- Ideal for bulk solid materials from free to normal flowing
- Trough screw conveyor made of welded carbon steel
- Full-leaf worm shaft
- Ø 350 mm
- Progressive thread from 155 to 295 mm
Smxxgezp
- Material feed on both sides
- Conveying length long side: approx. 3.400 mm
- Conveying length short side: approx. 1.300 mm
- Spout 56...
We make the search easier for you
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
10 valuable tricks for buying used machines online
Photo gallery: The World's 10 biggest excavators
Morlock Motors official partner of Machineseeker and Truckscout24
Photo gallery: the 10 strongest forklift trucks in the world
Olympic Games: Machineseeker sponsors Team Germany
How to receive 100% of our e-mails
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.