Used Edgebander for sale (805)

Condition: used, machine/vehicle number: 008111, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Iodpfx Amsy Dq Iaeiotg Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: good (used), Brandt edge banding machine with AIRTEC + jointing unit Adhesive: EVA / PUR / Airtec Itodpfx Ameyz Sxboieg Roll material: 0.4-3 mm edge thickness Strip material: 0.4-15 mm (12 mm) edge thickness Workpiece thickness: 8-60 mm Recently serviced! Jointing unit OVERVIEW OF UNIT CONFIGURATION: JOINTING MILLING UNIT 2 x 2.2 kW 200 Hz GLUING UNIT A12 END TRIMMING UNIT CHAMFER/STRAIGHT 2 x 0.35 kW PNEUMATIC ADJUSTMENT END TRIMMING CHAMFER/STRAIGHT PNEUMATIC 2-POINT ADJUSTMENT END TRIMMING PRE-MILLING UNIT 2 x 0.55 kW 0 DEGREES PNEUMATIC 2-POINT ADJUSTMENT MULTIFUNCTION SHAPING MILLING UNIT 2 x 0.4 kW PROFILE SCRAPER WITH QUICK-CHANGE HEADS PNEUMATIC SCRAPER ADJUSTMENT GLUE JOINT SCRAPER BUFFING UNIT Feed speed: 8-18 m/min, with contour milling cutter 14 m/min Total length: 5760 mm Roll material: 0.3-3 mm Strip material: 3-15 mm (With VKNR 4845 exchangeable milling units, max. edge thickness is 12 mm!) GLUING UNIT A12 WORKPIECE PRE-HEATING QUICKMELT APPLICATION UNIT ADHESIVE REACTIVATION Infrared Workpiece return system BOOMERRANG TFU 140/R 20 Year of manufacture: 2016 As shown in illustrations Available from November 2026 All data taken from the data sheet, therefore subject to change Technical specifications available on request

Condition: new, Code: N0235 Brand: CASADEI INDUSTRIA Model: E 350 PM Automatic edge bander with hot melt (EVA) glue pot, chain panel feeding and pre-milling Maximum finishing quality Chain feeding system Pre-milling (E350PM) 3 free spaces for finishing units High performance 7 m/min feed speed 45 mm panel height 2 mm edge coils Minimum space occupied 2,30 m length Easy to use Unit settings with a piece of edge Easy and intuitive use of machine 3 position infeed fence 0-1-2 mm (according to edge thickness) Chain panel feeding Firm grip of panel guaranteed by special non-slip rubber on the pads. Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre. Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre. Pressure bar with locking levers Top pressure bar with a double row of rubber wheels mounted on bearings, with locking levers and position indicator Pre-milling INVISIBLE GLUEING LINE DIAMOND tools Ø= 60mm H= 54mm HF motors 200 Hz – 12.000 rpm – 0.75 kW (each) Dedicated suction system and blower for panel cleaning before glueing Glueing unit PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS 6 heating elements to guarantee uniform glue temperature. Motorized glue spreading roller with an internal electrical heating element. Inferior Teflon-coated glue pot to permit complete and rapid cleaning. Pneumatic shear, pressure rollers, edge feeding system DETAILS THAT MAKE THE DIFFERENCE Edge feeding synchronized with panel being processed Oscillatory movement of the cutting shear unit to guarantee perfect glueing Quick and precise positioning of the pressure rollers. The system “reads” the edge thickness, making mistakes impossible! Trimming cut-off PERFORMANCE AND VERSATILITY End trims front and rear excess edge Working cycle controlled by PLC Exclusion from control panel (PLC) Flush trimming unit Flush trimming unit with vertical disc copiers as standard Possibility of processing for edges from 0.4-2 mm Anti-adherence / release agent spraying unit (Opt.) INSTANT PERFECT CLEANING Spray function controlled by PLC 2 sprayers (lower and upper) and liquid tank Infrared lamp (Opt.) Iodpfxsyvt Exj Amiotg TO GUARANTEE THE BEST GLUEING CONDITION Creates the best conditions for perfect glueing Heats panels and removes all traces of dampness.

Year of construction: 2001, condition: used, functionality: unexamined, Edgebander for mouldings using hot stamping method MAKOR type DORA 7, year of manufacture 2001 Itsdeytc E Uepfx Amisg

Year of construction: 1989, condition: used, functionality: unexamined, Edgebander for mouldings by P.A.O. MACC model DC 4C Ijdpfx Amsytc Dkjistg

Condition: good (used), Code: 0338 Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge bander with a cartridge-based adhesive system for wood edges, pvc, abs, veneer, suitable for furniture, panels, custom-made furnishings, kitchens, bathroom cabinets, carpentry shops, and various - CE Standard Features: Quick glue replacement: patented cartridge system that allows for quick and efficient switching between EVA and PUR glue during operation, or for changing glue colors - Simply replace the cartridge, no complicated cleaning of the glue tank is required - Ready for use in 3,5 minutes Technical data: Min/max panel height mm 6/45 Applicable edge thickness mm 0,4 - 6 Max gluing height mm 51 Min panel width mm 60 Min panel length mm 180 Feed speed mt/min 8 Composition: Gluing unit: Automatic feed for roll and strip edging - Patented Holz Her cartridge system - Roller press unit Iedpfx Amsyvh Syeiotg Tilting front and rear end trimming unit - Motors 0,22 Kw Multifunction unit with controlled axis for trimming and chamfering - N° 2 motors 0,6 Kw Edge scraper unit Glue scraper unit for removing any glue residue Brush unit for perfect cleaning Holz Her control system: Rotatable and tiltable control panel - All units can be activated individually - Unit functions with text display and graphical support - Display for unit preselection - Program list with program names and numbers - Self-diagnosis Soundproof booth Compressed air 6-7 atm Overall dimensions mm 4300 x 1200 x 1675 h Weight kg 1700

Condition: used, Year of construction: 2001, functionality: fully functional, workpiece height (max.): 45 mm, workpiece width (max.): 60 mm, workpiece length (max.): 180 mm, edge thickness (max.): 8 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: pneumatic, total height: 1,640 mm, total length: 3,700 mm, total width: 1,940 mm, overall weight: 830 kg, Equipment: CE marking, documentation/manual, We offer this used HOLZ-HER 1310-1 edge banding machine, year of manufacture 2001. Type: 1310-1 Serial number: 126 / 0-106 Year of manufacture: 2001 Operating pressure: 6 bar Iodpfey Hfq Usx Amistg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Edgebander Artech Akron 435 Pre-milling, Glue application by roller, Pneumatic pre-cut guillotine, Pressure rollers, Finish trimming saws, Multi-cutter R1-R2 – top and bottom milling and corner processing, pneumatic adjustment, Profile scraper, Flat scraper, Itedpfx Ajy Dtw Demieg Polishing unit, Max. workpiece height: 60 mm Max. edge thickness in roll: 3 mm, Feed speed: 12 m/min Condition: very good.

Condition: used, functionality: unexamined, total height: 1,800 mm, total length: 9,500 mm, Edge thickness: 0.3 - 30 mm Maximum edge height: 66 mm Iodpoyzn Tbsfx Amistg Minimum workpiece width: 60 mm Minimum workpiece length: 140 mm Workpiece thickness: 6 - 60 mm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Edge Banding Machine Edge Bander EBM Model: KDP 112 SLK Year of manufacture: 2000 Edgebanding via hot-melt glue pot Plastic edges and veneers 0.4 to 1 mm PVC edges and thick veneers 1.0 - 3.0 mm Solid wood edges up to 5 mm Flush cutting with end trimming unit Flush milling top and bottom Dimensions approx. 2.86 x 1.32 x 1.3 m Weight approx. 550 kg Total power requirement approx. 10 kW Itodey Ahubspfx Amiog Condition as shown in the pictures and as described in the article description. Collection by the buyer is possible. All dimensions are approximate. All details provided to the best of our knowledge but without guarantee. Subject to prior sale. The items can be collected by the buyer or shipped at the buyer’s expense. Shipping costs listed are for reference only and may vary depending on distance. The offered item is subject to differential taxation. The stated sale price is a gross amount. An invoice with VAT shown separately will not be issued. You will receive an invoice according to §25 UStG (German VAT law). Warranty conditions: Due to wear and tear, used parts are generally sold as defective – for parts only – and only to business customers. By placing a bid, the buyer accepts this as the basis of the purchase agreement. For used items, warranty period is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur as defined by §14 BGB, any warranty is excluded. For new items, the warranty period is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: used, BRANDT Optimat KDF340 Edge Bander Pre-milling cutters Adhesive application by roller Pneumatic pre-cut guillotine Pressure rollers End-cutting saws Top-bottom milling unit R1-R2 Profile scraper Polishing unit Max. workpiece height: 45 mm Max. edge thickness from roll: 3 mm Feed speed: 10 m/min Machine length: 350 cm Machine inspected, ready for operation Itsdpfx Amjy Dc Uloiog

Condition: like new (used), Hebrock F4 Edge Bander Well-equipped, available for inspection before purchase. Note: The machine can be viewed and tested from May 11th. Pre-milling cutters, Glue application via roller, Equipped with glue drain, The glue pot is replaceable. Pneumatic pre-cut guillotine, Pressure rollers, Flush trim saw, Top and bottom milling unit, R1–R2, Profile scraper R1-R2, Interchangeable corner rounding unit for 1mm and 2mm, Flat scraper, Nesting capability, Itjdpfx Asy Dcmuemisg Pneumatic 3-point adjustment, LED lighting, Max edge tape thickness (in roll): 3mm, Feed speed: 7 and 10 m/min, Power requirement: 7.08 kW, Machine as new, ex-demo.

Condition: ready for operation (used), functionality: fully functional, working height: 60 mm, TECHNICAL DETAILS Max. panel height: 60 mm PVC/ABS edge height: 3 mm MACHINE DETAILS Power-Touch control: 21" full HD display EQUIPMENT - Anti-adhesive unit - Twin-motor corner copying unit - Roll holder plate - EVA glue application unit with pre-melter and glue pot - Edge pressure unit for straight profiles with pressure rollers - End trimming saw unit with automatic swivel adjustment - Double-motor beveling unit with adjustable setting - Double-motor multifunctional rounding unit (beveling + rounding) - Working height electronically adjustable via NC control - Workpiece support guide with idler rollers - Side roller conveyor with free-running wheels - Edge scraper unit Ijdpfeyzm R Sjx Amiotg - Glue scraper unit - Brushing unit External reference: MMG013

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-261-20-5976, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 20 m/min, controller model: POWER CONTROL PC 20+, TECHNICAL DETAILS Panel height: 60 mm PVC-ABS edge thickness: 3 mm Solid wood edge thickness: 12 mm Feed speed: 20 m/min MACHINE DETAILS Control: POWER CONTROL PC 20+ Operational current (full load): max. 33 A Largest motor: 9.7 A Largest heating circuit: 2.7 A Isdpfx Amoyzm E Nsistg Fuse: 35 A Frequency: 50 Hz EQUIPMENT Upper motorized rubberized belt Manual infeed guide Anti-adhesive unit Jointing unit Gluing with EVA adhesive Edge support plate End trimming unit with automatic tilt adjustment Offset trimming and corner rounding unit with two motors Linear contour rounding unit with two motors Edge scraper unit Glue scraper unit Buffing unit External reference: MMG014

Condition: used, machine/vehicle number: 008019, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Itjdpfx Aowvq E Nemieg Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm

Condition: good (used), Year of construction: 2023, For inquiries: Zoltán Utasi +36 30 205 7380 • Edgebander for the edging and post-machining of materials in panel Itedpsy I Sruefx Amiog • form (such as chipboard panels, MDF panels, tabletops, etc.) • Edging thickness of coiled edging: 0,4 - 3 mm • Edging thickness of cut-length edging: 0,4 - 5 mm • Edging height: max. 55 mm • Panel thickness: 8 - 50 mm • Edging cross section: max. 5 x 50 mm (depending on material) • Workpiece width: min. 70 mm • Workpiece length: min. 180 /210 mm • Feed speed: 9 m/min. • with manual pressure bridge adjustment • Pull-out workpiece support, distance 500 mm • Control unit Edge Control BC 15 with 15.6" touch screen • Vi.se. (VIsual SEtting mode) provides all setting values for the digital counters and pressure gauges as a digital logbook to set up the machine quickly and safely. • Pre-milling unit FG101 with 2 diamond cutter heads • Edge feeder MG101 • Glu Jet hybrid technology GJ101 (2,3 kW, 50 Hz): automatic adjustment of gluing height (tracing nozzle) • Hopper for 1,4 kg glue cartridges (4 cartridges) • Glu Jet rinse hopper • Automatic refill function • Pressure unit DW101 • End trimming unit KA101 (50 mm) pneumatic plunge in 1-motor 0.22 kW, 12000 rpm • Trimming unit FR101: multifunctional milling unit Flush, Radius 2 x 0,37 kW, 12000 rpm 2 x HW insert milling cutter Ø 75, Z4, R2 • Corner rounding unit FF101 on double linear guide • Scraper unit ZK101 R=2,0 mm • Chip collector • Surface scraper unit FK101 • Buffing unit SW101(2 x 0.13 kW, 1,400 min-1) For cleaning and edge polishing, with 2 textile discs Ø 120 mm pivotable 0 - 5° • Sprayer TR101 for the in- and outfeed area

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Mill Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Itodpfoytr Hbox Amiog Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spray unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial data. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 6216

Condition: used, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, feed rate X-axis: 7 m/min, The used FELDER G 460 is a compact and powerful edge banding machine designed for professional applications in crafts and small-scale industry. It enables precise edging and post-processing of edge materials, impressing with reliable technology, user-friendly operation, and high-quality workmanship results. Machine features: - Glue unit for hot-melt adhesive - End trimming unit (front/rear) - Flush milling unit Ijdpfx Aoyyk Sqemijtg - Fine milling/radius unit - Combined radius and surface scraper unit - Sturdy machine construction Further technical data: - Edge thickness: approx. 0.4 – 3 mm - Workpiece height: approx. 10 – 45 mm

Condition: refurbished (used), functionality: fully functional, edge thickness (max.): 15 mm, overall weight: 4,000 kg, OTT edge banding machine type Strom+ Optional with return system TransCompakt or TransLift. The machine is factory reconditioned and is sold with warranty in Germany. New tools, new chain plates and belts. For PUR glue and EVA glue. Alternatively, we also have access to a Tornado+ and StrongEdge, both factory reconditioned. Itodjyn Am Iopfx Amijg

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. Iedex I S R Depfx Amiotg Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Feed Speed: 7 m/min / Min. Panel Length: 80 mm / Min. Panel Width: 60 mm/ Max. Panel Height: 40 mm / Edge Thickness: Up to 3 mm / Glue Pot Capacity: 2 liters End Trimming: Dual vertical saws at 12000 rpm / Profile Trimming: Inclined unit at 15° with 12000 rpm This 6-axis Bi Matic CH 2.2 edgebander was manufactured in 2010, featuring a glue pot capacity of 2 liters and dual vertical saws for end trimming at 12,000 rpm. It supports edge thickness up to 3 mm and requires an air pressure of 6 bar. If you are looking to get high-quality edgebanding capabilities, consider the Bi Matic CH 2.2 machine we have for tact us for more information. Application Types Edge Banding Iodpfx Ajx R E Nfsmistg

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edgebander, year of manufacture 2021. The package includes a KOGI dual-bag chip extractor, 2.2 kW / 1650 Pa. The machine comes with an additional glue pot. An appraisal report is attached in the PDF. Type: EDGETEQ S-240 PROFI KDF 230 Machine number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum full-load current: 17.3 A Fuse: 20 A Short-circuit current: 5 kA Control voltage: 24 V Enclosure rating: NEMA 1 Largest motor: 4.6 A Largest heater current: 2.3 A Itedpfx Ajy Exwfsmieg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: good (used), Year of construction: 2008, Biesse STREAN B1/8.0 Single-Sided Edgebander, Year 2008 - Code 0000015: Y-axis CNC with infeed guide - Code 0000011: Right-angle panel inserter - Code 0000517: Automatic lubrication C1 - Code 0000017: Parallelogram workpiece support 5.5–8.5 - Code 0000439: B1 installation kit with panel return device - Code 0000136: Liquid jet application unit - Code 0000669: RT20 pre-milling unit, 2×3.5 kW, 9000 rpm - Code 0000336: Additional pair of diamond cutters, H=60 - Code 0000469: SP20 glue spreading unit - Edge thickness: 0.3–3 mm - Bswyjukh Tqjhhpkswt (term seems corrupted, clarification needed) - Wood thickness: 20 mm - Panel thickness: 10–60 mm - Code 0000244: Y-axis CNC for pressure zone - Code 0000682: Two-position edge magazine for SP10 and SP20 - Code 0000144: Additional glue pot - Code 0000367: IT90-S end trimming unit, 2×0.3 kW, 12000 rpm - Code 0000704: Solid wood edge kit up to 20 mm thickness for IT90 - Code 0000711: 3-position pneumatic kit for IT90 - Code 0000151: RS10 flush trimming/pre-milling unit – straight tool, L=20, 2×1.3 kW, 12000 rpm - Code 0000901: Increased straight tool (L+30, solid wood) for RS10 - Code 00000152: 2.4 kW motors for RS10 flush trimming unit – straight tool L=30 - Code 00000536: Automatic 2-position adjustment for RS10 - Code 00000158: RF=40 angle trimming unit, 25° bevel, R=1.5/2/3 mm, 2×0.65 kW, 12000 rpm - Code 0000651: Copying shoes for RF10-RF30-RF40 groups - Code 0000579: AR30 multifunction corner rounding unit, R=2 mm - FAST system with 2 pre-selection positions via control panel - 2×0.35 kW, 12000 rpm - Code 0001017: 4-position pneumatic system for AR30 - Code 0000165: RB10 edge scraper group, R=2 mm - Code 0000652: Copying shoes for RB10-RB30-RB40 groups Itsdpfx Amjxala Toieg - Code 0001004: RC20 glue scraper group - Code 0000171: SZ30 superimposed oscillating brush group, 2×0.18 kW, 1400 rpm - Code 0000989: Liquid jet application kit for SZ30, SZ60 - PH10 edge band pre-heater WITHOUT PANEL RETURN

Condition: good (used), Year of construction: 2007, machine/vehicle number: 1386, functionality: fully functional, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, height adjustment type: mechanical, year of last overhaul: 2025, Hebrock Edge Banding Machine AKV 3003 DK F Edge banding machine with hot melt adhesive application to the workpiece for edge material up to 8 mm and joint trimming including DIA tools - ergonomically positioned control panel - easy adjustment options from the operator’s side (digital displays) - maintenance-free quick heat-up glue pot - robust chain drive - high-frequency crosscut saw (300 Hz) - high-frequency flush milling station incl. tool fitting and fine adjustment from the operator’s side - automatic edge feed - safety and noise protection hood - extendable workpiece support - electronic temperature controller - pneumatic end trimming for up to 3 mm edge thickness and 60 mm edge height - double roller upper pressure Isdpfx Asyud Sfjmiotg - signal lamp for workpiece tracking - aggregate viewing window from operator and rear side - CE-compliant safety standard complete with: - surface scraping unit - corner rounding cutter - 8 mm edge thickness Workpiece height approx. 10 - 40 mm, Feed rate approx. 10 m/min, Power consumption 11 kW (31 A) 400 Volt, 50 Hz, Length approx. 4300 mm Weight approx. 1250 kg Sold in current condition as inspected, ex location Seevetal, excluding freight and packaging, sale subject to prior sale.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Used edge banding machine SCM - Model: Olimpic K360 T-ER1 Itedpfx Ajyrr Najmiog - Very good condition. - Immediately available - Video on request - Year of manufacture: 2016 - High-end configuration (2 extra glue pots)