Used Edgebander for sale (784)

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: H/32059, functionality: fully functional, workpiece height (max.): 50 mm, feed rate X-axis: 22 m/min, TECHNICAL DETAILS Panel height: 10 mm to 50 mm Solid wood: 12 mm PVC/ABS: 0.4 mm to 3 mm Fpsdpfx Aoydibweikop Max. feed speed: 22 m/min Min. panel length: 150 mm Min. panel width: 70 mm MACHINE DETAILS Rectifier group motors: 1.5 kW (2 motors) EQUIPMENT Touchscreen control for adjusting working units Panel support guide Side roller conveyor with idler wheels for panel support Anti-adhesive unit Roll holder plate COMBIMELT glue unit for hotmelt adhesive with automatic VarioMelt dosing and pre-melter Patented edge pressing unit with segmented pads Trimming unit with 2 motors Cleaning unit with 2 motors Rounding unit Edge scraper unit Working height adjustable electronically via C.N. Powered rubberized conveyor with top pressure

Condition: ready for operation (used), machine/vehicle number: 0-200-03-8334, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 24 m/min, controller model: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Feed speed: 24 m/min MACHINE DETAILS Control system: Power Control PC 22 Fedpsydiymsfx Aikspp Supply voltage: 480 V Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Fusing: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Electronically adjustable working height via CNC Powered, rubberized conveyor belt with increased pressure Panel support guide Lateral roller conveyor with idler rollers for panel support Sanding unit Infrared lamps for panel edge preheating Six-position coil holder magazine with automatic edge change via CNC EVA hot-melt gluing unit with premelter and glue pot Edge pressing unit for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with two motors and automatic tilt adjustment Overlapping cut-off / milling unit with two motors Glue / milling unit with two tiltable motors, electronically adjustable via CNC Multifunctional 4-motor corner rounding unit (smoothing + rounding) with CNC control, automatic adaptation Provision for integrating an additional working station Edge scraping unit Oscillating brush unit

Condition: good (used), Year of construction: 2006, - Infeed fence: manually adjustable - Jointing milling unit with 2 motors, each 2.2 kW: both motors pneumatically controlled - Hot-melt adhesive application - Pressure zone: with 1 main pressure roller and 3 follow-up pressure rollers - End trimming unit with 2 motors, each 0.35 kW: automatically adjustable via program from chamfer cuts to straight cuts - Edge milling unit with 2 motors, each 0.55 kW: for flush milling, bevel milling, or radius milling with 4-point fixed position adjustment for side tracing - Groove milling unit: with horizontal spindle Fpsdsy Av A Hspfx Aiksp - Copy milling unit with 2 motors, each 0.35 kW: with pneumatic infeed and outfeed control - Profile scraper unit: with pneumatic infeed and outfeed control - Flat scraper unit - Buffing unit

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, ASSEMBLY UNIT PROGRAMMABLE ASSEMBLY FENCE 0-5MM AUTOMATIC MAGAZINE FOR EDGE BANDING ROLLS AUTOMATIC MAGAZINE FOR SOLID EDGES CUT-OFF KNIFE FOR EDGE BANDING ROLLS PROGRAMMABLE PRESSURE ZONE WITH 1 PRE-PRESSURE AND 5 POST-PRESSURE ROLLERS GLUING UNIT, FLUSHABLE FOR PU ADHESIVE LINEAR CUTTING UNIT, SWIVELABLE FLUSH MILLING UNIT 2X1.9 KW RADIUS MILLING UNIT RADIUS SCRAPER COPY MILLING UNIT WITH 2 MOTORS SURFACE SCRAPERS TOUCHSCREEN CONTROL PANEL Fpjdsv I Sayjpfx Aikep EDGE THICKNESS UP TO 20MM MACHINE LENGTH 7.90 M

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Fsdowlbxlepfx Aikepp Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: excellent (used), functionality: fully functional, AUTOMATIC EDGE BANDER machine model STEFANI MONOBETA 4000 second hand machine with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , thin solid wood strips for furniture, furnishings, kitchens, bathrooms, doors, panels and various XILIA positioner system Fpedpfxjwlzz Ts Aiksp technical data : tiltable gluing group: 0° / 7° min. height of gluing panel mm.10 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.25 min. panel width mm.60 min. panel length mm.110 adjustable feed speed: from 8 to 22 mt./min. electric press lift telescopic support for large panels soundproof cabin composition : 1. gluing group with glue tank 2. pressure rollers 3. edge feeder 4. end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors 0,44 Kw at 12000 rpm 5. trimming unit with overlapping motors for trimming the upper and lower part of the excess edge - n.2 motors of 0.55 Kw at 12000 rpm supplied, in addition, n.02 tilting trimming and cornering groups. n.2 motors Kw 1,15 at 12000 rpm 6. glue scraper group for cleaning glue residues supplied with 2 glue scraper groups, as spare parts 7. overlapping brush group for brushing and polishing the applied edges - n.2 motors at 1400 rpm , tiltable 8. dryer unit 0-600° - 1400 watt 9. contour trimming unit model STEFANI TRIM/60 . external unit HF high frequency converter volt. 380/50

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine BRANDT Optimat KDF 440 C, year 2015: Configuration: Entry fence servomotorical adjustable Premilling manual adjustable Edge banding EVA glue / Airtec System Schugoma Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers pneumatic adjustable Fpsdpfxowun Iro Aikjp Polishing brushes Cleaning fluid spraying front and back. Control panel Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 11m/min. Total length including feeding plate 5573mm Total weight 1860kg Only 592.198 Meters edgebanded. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Edgebanding, flush sawing, flush milling, chamfer milling, radius milling - Scraper, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection port: 140 mm Ø - Workpiece width: min. 60 mm - Feed speed: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for coil material - WITHOUT pre-milling unit Fpsdpfjwv Uq Aox Aikop - Pneumatic cylinder new Shipping possible at additional cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: HFF 08 Machine no: 08/379 Year model: 2005 Edge cutter for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radii. Tech data: Max edging thickness: approx. 3mm Max workpiece height: 50mm Inner radius min: 40mm Milling motor: 12000 Rpm Work table height: 865mm Max 6 bar Chipboard: 120mm Milling motor: 0.37Kw Fpsdpfxsq H Spvj Aikep Motor: 1.5Kw, 50Hz, 400V 3-phase Stock no: 2001922

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, Hot Air Fedpfjqy Em Tex Aikjpp Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Fsdpfx Aislht Hzokspp F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: used, Imatronic Numerical Control with ImaWop 8.0 Software (software updated in 2020) Working range on X axis mm 7000 Working range on Y axis mm 1400 Full table with support panel for positioning the suction cups Suction cups can be manually positioned on the work surface using a laser indicator No. 2 vertical electrospindles with C axis with automatic tool change Automatic tool changer with 18 positions on the back of the machine Drilling head with 21 spindles arranged as follows: * N° 11 verticals on X axis * N° 10 verticals in Y axis Edgebanding unit with glue pot and pre-melter for EVA glue (glue pot new in 2023) Nordson pre-melter for PUR bonding on Folding panels No. 1 blade aggregate (end cutter) No. 1 trimming aggregate No. 1 cross-shaped aggregate with 4 horizontal drilling lines No. 1 blower aggregate 2-position edge storage unit Front protection and safety system with carpets Full protection cabin (not original IMA) TECHNICAL DETAILS TO BE CHECKED Fpsdpow El Nhjfx Aikop

Condition: new, Year of construction: 2023, New machine Fpjdsw I U Drepfx Aikep Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Min. workpiece width: approx. 75 mm Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Surcharge for buffing unit EVA/PUR glue pot with emptying function Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Location: Hochheim

Year of construction: 2024, condition: new, Return System Year of manufacture: 2024 The RTS Compact is a standalone system that can be connected to any edgebanding machine (KAM), regardless of the manufacturer. The feed speed is continuously adjustable to match the speed of the edgebander. The RTS Compact is supplied complete with a control cabinet and is ready for operation immediately after installation. Optional: "RTS Compact Conveyor Extension" for easy rotation of parts during cross-edge banding. Fjdpfxsw Nadmo Aikepp Optional: "RTS Compact Ergonomics Package" available. A lift table and air cushion table are used at the end of the return conveyor. This option enables ergonomic operation. - Compatible with edgebanders from all manufacturers - Allows single-operator control of the edgebander - Maximum ergonomics - Reduced personnel costs - Gentle material handling - Installation time approx. 0.5 day - Turning device for small parts - With conveyor belt L 4500 x W 800 mm Single-track roller rail RTS Compact control, optional control box Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2008, Used machine Year of construction: 2008 Edge thickness PVC: 0.4 - 2.0 mm Panel thickness: 10-45 mm Edge banding from roll automatic cross-cutting unit Flush trimming unit for flush and radius milling, r = 2 mm Fpsdpfxsxppwbe Aikjp Motor 0.37 kW - 9000 rpm Extraction connection: 2 x 60 mm Heating capacity approx. 1150 W Total power 2 kW Weight approx. 240 kg Dimensions 2040 x 1240 x 1260 mm Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 220 V, NEXUS: Trusted by Professionals Proven Performance in Contour Edge Banding Fodpfx Ajzphlwjikepp A proven contour edge banding machine designed for easy operation by users of all experience levels. Continuously improved through real customer feedback, NEXUS incorporates innovative features that significantly increase the speed and efficiency of your production process. Key innovations include a 3D laser scanning system that accurately copies the panel contour and measures the required edge band length with millimetric precision, a chassis-integrated edge band roll feeding table, and convenient automatic or manual operating modes selected through the touchscreen control panel.

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Fpsdpfozpzy Uox Aiksp Used machine Year of manufacture: 2017 Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026

Condition: used, Year of construction: 2010, Technical details: • Edge material thickness for strip material: 0.4–6 mm • Edge material thickness for coil material (depending on material): 0.4–3 mm • Edge material height: max. 65 mm Fodpfozxww Uox Aikopp • Workpiece thickness: 6–60 mm • Minimum workpiece width: 65 mm • Minimum workpiece length: 160 mm • Feed speed: 10 m/min • Integrated control panel on the front side, in the infeed area • Control system: PPC 221 – Power PC • Pull-out workpiece support table, extension: 600 mm • 1801 Pre-milling unit with diamond milling cutter (1 × 0.8 kW, 1 × 1.2 kW, 200 Hz, 12,000 rpm) • 1903 Edge band magazine, pre-cutting up to 3 mm • 1906 MG combined glue application unit (cartridge and granulate) • Pressure regulator for cartridge glue application with pneumatic control • 1912-3 Pressure roller unit • 1918 Pneumatic end-trimming unit • 1827 Multifunctional milling unit (pneumatic control) • 1832 Corner rounding/milling unit • 1929 Scraper unit, R = 2 mm • 1964 Flat scraper Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Fodpszyy Avefx Aikepp Equipment and technical data:

Condition: used, Year of construction: 2009, 0,4-6 mm Workingpiece thickness from to 6-60 mm Fjdpozy Sfcofx Aikspp Total length 3516 mm Feed speed 10 m/min. Weight 850 kg

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Fpedjzku Rpspfx Aikop Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space

Condition: used, Year of construction: 2000, machine/vehicle number: C/62702, functionality: fully functional, operating hours: 1,660 h, workpiece height (max.): 42 mm, edge thickness (max.): 8 mm, height adjustment type: electric, actuation type: electric, total height: 1,550 mm, total length: 5,750 mm, total width: 1,050 mm, overall weight: 2,200 kg, Equipment: CE marking, OTT Pacific is a series of industrial edge banding machines (machines for applying and processing edge strips) from the Austrian manufacturer Paul OTT GmbH. Fpodpezi E Szjfx Aikep Key features and specifications: Purpose: Precise processing and bonding of ABS, PVC, wood, or veneer edge strips onto wood panels. Compact design: The total length of the machine is approximately 5.5–5.7 meters, allowing it to be installed in smaller workshops. Edge strip thickness: Processes edge strips with a thickness of 0.3 mm to 15 mm (in classic V6 models, up to 6 mm). Workpiece thickness: Panels with a thickness of 8 mm to 42 mm. Feed rate: Between 12 m/min and 18 m/min. Popular models in the series: OTT Pacific V6 / V6-F: A classic and widely used model with grooving cutters (the F designation) and processing of edge strip thicknesses up to 6 mm.

Condition: excellent (used), HOLZ-HER Auriga 1308 XL edge banding machine - used PC control with screen, Touchscreen, Swiveling control panel, Program memory, Automatic adjustment of pressure beams, Feed via transport chain, Workpiece support can be extended, Diamond flush trimming cutter in both forward and reverse rotation, Strip magazine, Standby function, Glu Jet cartridge system, Cartridge system with sensing nozzle, Use of PUR adhesives possible, Gluing unit with driven roller, Pneumatic control of the gluing unit, Miter saw with 2 high-frequency motors, Miter saw pneumatically swiveling, Flush/radius milling unit, Motorized positioning control for milling unit, Milling tools with diamond coating, Air nozzle on the milling unit, Corner copying unit with diamond-coated cutter, Radius draw blade with motorized positioning, Air nozzle on the radius draw blade, Process-controlled surface draw blade, Air nozzle on the surface draw blade, Spray device for release agents, Spray device for cleaning agents, Edge trimming unit ----- Technical data ----- Edge thickness, roll material: 3 mm, Edge thickness, strip material: 5 mm, Workpiece thickness: 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min, Distance workpiece support: 480 mm, Support plate Ø for edge material: 800 mm, Cutting blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of flush trimming cutter: 0.8/1.2 kW, Power of miter saw: 2x0.45 kW, Power of milling station: 2x0.65 kW, Power of corner copying: 0.3 kW, Power of edge trimming: 2x0.09 kW, Extraction port Ø flush trimming unit: 2x80 mm, Extraction port Ø miter saw: 2x70 mm, Extraction port Ø milling unit: 100 mm, Extraction port Ø draw blade unit: 120 mm, Compressed air connection: 6 bar, Overall length: 5,000 mm, Dimensions (LxWxH): 5,000x1,250x1,720 mm, Fpodey T D N Ajpfx Aiksp Weight: 1,300 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - New heater - Cartridge system checked for leaks - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Ready for immediate use

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 1000023212, functionality: fully functional, power: 13 kW (17.68 HP), input voltage: 400 V, input current: 24 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 12 mm, height adjustment type: electric, feed rate X-axis: 18 m/min, actuation type: electric, total length: 5,900 mm, overall weight: 1,870 kg, Equipment: CE marking, Biesse Akron 1440 A – single-sided automatic edgebander (2018) Fpsdpfxsy U T Azs Aikop Single-sided automatic edgebander in excellent, near-new condition. Regularly serviced, fully functional and currently in full daily production. Inspection under power / live demonstration possible. Gluing system – dual EVA + PUR: the machine is equipped with both a polyurethane (PUR) glue roller and an EVA glue roller, each with its own glue pot, plus a PUR pre-melter. This allows the full range of edgebanding work, from standard EVA to high-quality, water- and heat-resistant PUR bonding. Feed & pressure: automatic coil edge feeder with separate, automatic feeding; pressure-roller conveyor (steel, rubber and edge-pressing rollers) for a clean, consistent glue line. New touch-screen control panel; rear cleaning brushes replaced; scraper inserts/blades replaced. Working capacity: panel thickness 8–60 mm · edging material height 14–64 mm · edge thickness 0.4–3 mm (coil) / up to 12 mm (strips) · panel length 100–3200 mm · multi-speed feed 8/12/15/18 m/min. Technical data: power 13 kW · 400 V / 50 Hz / 3-phase · weight approx. 1870 kg · air supply 7 bar · year of construction 2018.

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges Fpsdpfezuyhhox Aikop With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.