Used Edgebander for sale (798)

Condition: repair required (used), Motorized edge banding machine Hyllus mod. 300 Robur used to be overhauled working Pgedpfxowakguj Ahmor maximum edge banding thickness 3 mm. groove depth 450 mm. axis distance 100 mm.

Condition: used, Edge banding machine Brand: Brandt Model: Profiline KDF 670-C Hiflex Single-sided edge banding machine in right-hand design, for hot melt gluing. Quick-change gluing unit for hot melt glue. Processing with PU glue granulate possible in accordance with glue specifications. Leak-proof glue reservoir under the glue roller. Precise glue application to the workpiece with glue roller, no adjustment of workpiece thickness necessary. Glue roller with selectable rotation direction for counter or forward feed. Glue temperature monitoring via electronic thermostat. Automatic reduction of glue temperature during work breaks. Infrared heating for hot melt reactivation. Automatic edge banding magazine for roll material and fixed lengths, including roll plate with a diameter of 800 mm and reinforced cutting shears for thick PVC/ABS, max. 3 x 45 mm. Standard equipment with edge banding and workpiece – distance monitoring with optical display. Stable pressure zone with driven, compressed air-loaded main pressure roller and 3 free-running post-press rollers. Standard equipment with automatic central lubrication for the transport chain. Motor-driven adjustment of overpressure. Control panel at the machine infeed. Technical data Edge strip thickness: 0.4 – 12 mm Cutting tool: max. 3.0 x 45 mm or 0.8 x 65 mm Workpiece thickness: 8 – 60 mm Feed speed: 11 – 16 m/min (see below) When selecting edge banding thicker than 3 mm, the feed speed is automatically switched to 14 m/min. automatically to 14 m/min. When selecting form cutters, the feed rate is automatically switched to Podjynhwfopfx Ahmsgr 11 m/min. Electrical connection: 400 V, 3-phase, 50 Hz Compressed air connection: 6 bar Connected load approx. 17 kW Machine length: 6,860 mm Full information about the machine can be found on our webpage burbagemaskin.se

Condition: used, Year of construction: 2013, Numerical control PC Office with Widge Plus software Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3200 Panel width min - max mm 215 - 3200 Min - max panel height mm 10 - 60 Edge thickness in roll min - max PVC-ABS mm 0,3 - 3 Continuously variable feed speed 10 - 40 m\min Motorized pressure rubber belt Bearing track with retractable pin Pin height 12 - 18 - 25 mm Distance between the retractable pins mm 500 \ 400 Working groups mounted on NC motorized overtables Squaring part composed of (for each side): Anti-adhesive group Timed automatic anti-splinter group Double Hogger group Edging part composed of (for each side): Gluing unit with pre-melter for PUR glue and pre-melter for EVA glue Edge pressure rollers electronically controlled by N.C. Edge holder magazine with 6 positions End Cutting unit with two motors Rough trimming unit with 2 motors Fine trimming unit with 2 motors electronically controlled by NC Rounding unit with 4 motors 0-90° tilting grooving group electronically controlled by CN (movable shoulder 0-90° tilting grooving group + double superimposed grooving unit (fixed shoulder) Anti-adhesive groups Edge scraper unit Glue scraping unit Brush group Pgsdpfxok Egvdj Ahmjr Phon group

Year of construction: 2008, condition: used, Panel return system for use with a single edgebander The panel is transported towards the operator via a motorized belt and a roller\belt table. Moeller mini control Maximum panel dimensions 2500 x 1450 mm Maximum panel height 60 mm Working speed 8 - 25 m\min Podjrxzb Rspfx Ahmogr Working height from the ground 835 - 960 mm

Condition: used, Numerical Control with NC 410 Software Machine suitable for 1st pass of the panel Motorized mobile shoulder opening by C.N. 1500mm Panel height 60 mm PVC/Abs mm 3 Continuously variable feed speed Working height adjustable electronically by C.N. Motorized rubberized belt with superior pressure Squaring part composed of (for each side): * Double shredder group * Automatic timed anti-splinter unit Beading part composed of (for each side): * Gluing group for EVA hot melt glue with pre-melter * Edge pressure group on straight profiles with adjustable pressure rollers * 2-position reel magazine with automatic edge change * Overlapping trimming group with 2 motors * Gleaning unit with 2 tilting motors * Moulder group tiltable 0-90 ° * Edge scraper assembly * Glue scraper unit * Belt sander assembly Pgedpfx Ahjrxzb Uemjr * Brush group

Condition: used, Bimatic edge banding machine Pre-milling cutters Roller glue application Pgedpfxsy Uxv Hs Ahmjr Pneumatic pre-trimming cutter Pressure rollers Final trimming cutters R1-R2 top-bottom milling unit Max. part height 50mm Max. edge band thickness in roll 3mm Feed rate 9m/min Power consumption 9kW Machine length 295cm Machine inspected, ready for testing

Condition: used, Year of construction: 2003, functionality: fully functional, For Sale: OTT Unimatic 25.8F Edgebander with Ligmatech ZHR 15 Return System We are selling an OTT Unimatic 25.8F edgebanding machine combined with a Ligmatech ZHR 15 return conveyor table. The units are sold exclusively as a complete set (line). Key Features and Customizations: Custom Grooving Units: The machine has been upgraded with two additional milling units—one for lateral grooving from the front and one for vertical grooving from the top. It was primarily used for the production of interior door frames. Stability Upgrades: Custom-built stabilization rollers have been added to the interior side to ensure precision when processing narrow workpieces. Podpfsygl A Aex Ahmsgr Recent Maintenance: Last year, the glue application unit (including the roller) was completely replaced with a new one. The track pads (shoes) were also replaced. Condition and Dimensions: Condition: The machine is rarely used but has been regularly maintained and serviced by TIBO. It is currently in full working order and available for testing on-site. Dimensions: Total line length is 11m, width is 2m. Serious inquiries only, please.

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: HFF 08 Machine no: 08/379 Year model: 2005 Edge cutter for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radii. Tech data: Max edging thickness: approx. 3mm Max workpiece height: 50mm Inner radius min: 40mm Milling motor: 12000 Rpm Work table height: 865mm Max 6 bar Chipboard: 120mm Milling motor: 0.37Kw Podpjq H Spvofx Ahmogr Motor: 1.5Kw, 50Hz, 400V 3-phase Stock no: 2001922

Condition: used, Year of construction: 2008, machine/vehicle number: 50071, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 42 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, height adjustment type: electric, feed rate X-axis: 16 m/min, actuation type: pneumatic, total height: 1,600 mm, total length: 7,200 mm, total width: 1,600 mm, overall weight: 3,700 kg, Equipment: CE marking, documentation/manual, We offer this well maintained IMA Advantage 60 edgebander, year of manufacture 2008. Machine type: Advantage 60 Serial number: 50071 Year of manufacture: 2008 Voltage: 400 V Frequency: 50 Hz Electrical supply: 3 N PE Nominal power: 18 kW Nominal current: 42 A The machine has the following groups: Premilling Blow-off nozzle for removing loose particles Heating unit Gluing unit Pgsdpfx Aoy Um Tmjhmjr End trimming unit MFA unit for milling/corner rounding Profile scrapper Cleaning agent application unit Riepe Flat scrapper Brushes Grooving unit With two interchangeable glue pots If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2007, functionality: fully functional, For sale: an edge banding machine of the brand Brandt KDF 660. Pgsdpfxjyhqa Ne Ahmjr

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, feed rate X-axis: 35 m/min, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Polishing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure applied with rubber belt Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documentation. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 5321 Pgedpfxeyqybue Ahmsr

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Podeytr Hbepfx Ahmsgr Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Mill Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spray unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial data. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 6216

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Podpfxeqy Em Tj Ahmjgr Max feed speed: 11 m/min

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Press length without side pressing device: approx. 2,300 mm Press length with side pressing device: approx. 2,100 mm Press width, max.: approx. 1,400 mm Pgedpfx Ahozn Iwqsmsr 4 pcs. vertical pressing units, adjustable, each with 1 crank drive pressing unit, and 1 counter piece 1 pcs. horizontal pressing unit with 2 crank drive pressing units 1 pcs. counter pressure rail, fixedly mounted on the left side 1 pcs. lower support rail with crank drive

Condition: new, 0 0,4 - 3 mm Workingpiece thickness from to 9 - 60 mm Feed speed stufenlos 8 - 12 m/min. Pgedpfx Ahsy Ay Akjmjr total power requirement 15 kw Dimensions (L/W/H) 4.290 x 840 x 1.690 mm

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors Pjdpfxozuykvs Ahmogr mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Year of construction: 2009, Edge banding machine Manufacturer: IMA Type: Novimat/I/G80/650/R3 Pgodpfx Ahszuyi Ejmsr Year of manufacture: 2009 Technical data - Workpiece overhang from the chain conveyor: 38 mm - Feed width: min. 65 mm (with max. workpiece thickness of 25 mm) - Workpiece length in feed direction: 150 mm - Overall height (top edge of chain conveyor): 960 mm - Feed speed: approx. 6 - 30 m/min, electrically adjustable - Machine control system ICOS open compact Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65 mm - Workpiece thickness: 8 - 40 mm (with edge trimming function) / 60 mm (without edge trimming function) - Smallest workpiece: 150 x 150 mm or 65 x 300 mm - Edge material: paper, plastic and veneer - Height: 14 - 65 mm - Roller material thickness: 0.3 - 3.0 mm (veneer edges limited to max. 1.0 mm) - Max. upper edge overhang: 5 mm Units Infeed area - Release agent applicator mounted at the top and bottom, not adjustable Edge trimming - 2 motors 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - Motor 1 counter-rotating - Motor 2 co-rotating Gluing unit VTG 3-6 - with one preheating nozzle 300 mm for preheating the workpiece edge - 6-position edge magazine for roller material 0.3 - 3 mm thick. - 1 driven main pressure roller and 4 pressure rollers, with scraper, pneumatically adjustable Glue application - with pneumatic quick-lock system - Chem-Coat coating - electronic temperature control - Volume 0.8 l Pre-melting tank approx. 1 l - Heating power 3 x 400 W - with EVA glue, approx. 7.0 kg/h - with filler-free glue, approx. 5.0 kg/h Cutting unit - 2 motors 660 W, 200 Hz - incl. frequency inverter with braking function - pneumatic pivoting 0+25 for straight and bevel cutting Flush trimming - 2 motors each 1000 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function Multi-profile trimming unit - 2 motors each 660 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function - for trimming 4 profiles - with stepper motor axes for horizontal and vertical positioning Contour trimming unit KFA x30 - 1 motor 500 W, 400 V, 400 Hz, 18000 rpm - Program-controlled conversion for up to 4 profiles - incl. fine positioning for different edge thicknesses Multi-profile scraping blade - Stepper motor axes for horizontal and vertical positioning - Scanning from above and below (max. 4 profiles) - Scanning from the side via pneumatic pressure Spray nozzles at the top and bottom for applying cleaning agents - fixed, not adjustable Surface scraping blade - with height sensing skid - electronically controlled horizontal positioning Buffing unit - 2 lower and 2 upper motors, 180 W, 50 Hz, 1400 rpm - 1st motor pair with cloth-sisal discs 50x160x19 mm - 2nd motor pair with polishing discs 50x160x19 mm - The motors operate in the same direction and are both tilted and pivoted in the feed direction. - Each motor can be individually adjusted vertically 2x NC-controlled grooving - 2 milling motors each 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - one manual 90-degree pivoting device from 180 -270 with co- and counter-rotating function - Horizontal, stepless adjustment with AC servo motor for grooving unit Workpiece return Note: The technical data and descriptions are copies of the order confirmation at the time. The information is for informational purposes only and is non-binding.

Condition: ready for operation (used), Year of construction: 2005, total height: 2,300 mm, overall weight: 2,600 kg, product length (max.): 6,060 mm, This BRANDT OPTIMAT KDF 670 edgebander was manufactured in 2005. It features a comprehensive range of processing units including pre-milling, glue application, edge feeding and cutting, and polishing. Capable of handling workpiece thicknesses from 8 to 60 mm and edge bands up to 15 mm. Feed speed reaches up to 20 m/min, optimizing productivity. Consider the opportunity to buy this BRANDT OPTIMAT KDF 670 edgebander. Contact us for more information about this machine. • Processing units / aggregates: • Pre-milling unit • Glue application unit • Edge feeding and cutting (roll/strip) • Pressure zone • End trimming unit • Top and bottom trimming unit (pre-milling + profiling) • Corner rounding unit Pgjdpfx Ahszug E Tsmor • Scraper unit (profile scraper) • Glue joint scraper • Cleaning (solvent or spray system) • Polishing unit • Working capacity: • Workpiece thickness: 8–60 mm • Edge band thickness (rolls): 0.4–3 mm • Edge band thickness (strips): up to 12–15 mm • Feed speed: 8–18 m/min (up to 20 m/min depending on configuration) • Minimum workpiece width: • 70 mm (workpiece thickness 8–22 mm) • 120 mm (workpiece thickness 23–40 mm) • 150 mm (workpiece thickness 41–60 mm) • Maximum edge roll diameter: 830 mm • Electrical & power: • Total installed power: approx. 21 kW • Voltage: 400 V, 3-phase, 50 Hz

Year of construction: 2016, condition: good (used), For inquiries: Zoltán Utasi +36 30 205 7380 • Edging thickness coiled edging: 0,4 - 3 mm • Edging thickness of cut-length edging: o max. 3 mm with unit FF701 o max. 8 mm without unit FF701 o max. 15 mm possible through tool change at trimming unit • Edge height: max. 65 mm • Workpiece thickness: 8 - 60 mm Psdpfx Ajwkf Twohmegr • Workpiece width: min. 65 mm • Workpiece length: min. 160 mm • Feed speed: variable 10 - 18 m/min LUMINA 1380 Ltronic Motor-driven pressure bridge adjustment Automatic lubrication of the transport chain Preparation RETURN-connection Electric for variable feed 400 V / 50 Hz, 2.2 kW Operation Edge Control 19 with 18,5" Touchscreen ECO MODE power-saving mode Pre-milling unit 1802 with 2 milling units Edge feeder MG701 SYNCHRO automatic transport of roll and strip products Ltronic LT702 NIR+ Laser Edging Unit Glue application system Glu Jet GJ302 automatic motorized, automatic adjustment of gluing height (tracing nozzle) (EVA, PUR) Glu Jet rinse hopper Change carriage GJ302 Change carriage LT702 Pressure section 1913 MOT: first roller driven, 2 support pressure rollers Sprayer unit after pressure unit with use of antistatic coolant End trimming unit1918 (60 mm) pneumatic Form trimming unit FR701: Play-free mechanism and 6 fully digital NC servo-axes ensure Form trimming unit FF701: Play-free mechanism and 4 fully digital NC servo-axes ensure 100% repetition accuracy at the touch of a button. Scraper unit 1929 MOT4 with motor-driven adjustment for sensing rollers Surface glue scraper FK701 With pre and post tracing device for scraping out superfluous glue on the complete panel length for a clean glue line. Sprayer unit1856 for the in- and outfeed area Buffing unit 1940 For edge cleaning and polishing

Condition: ready for operation (used), Year of construction: 2016, overall weight: 1,870 kg, Edgebander manufactured in 2016. This BIESSE Akron 1440 A features a pre-milling unit, multifunction milling units, flat trimming, and a corner rounding unit. It also includes automatic glue application, motorized adjustment of units, and a touchscreen control for ease of use. It comes with the complete panel return system. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. Technical Data: • Model: BIESSE Akron 1440 A Pgsdpozug Smofx Ahmor • Year: 2016 • Working hours: approx. 4,200 h • Power: 13 kW • Power supply: 380 V, 50 Hz, 3 / N / PE • Full-load current: 24 A • Air pressure requirement: 7 bar • Weight: approx. 1,870 kgWorking Capacity: • Feed speed: 8 / 12 / 15 / 18 m/min • Workpiece thickness: 10–60 mm • Edge thickness: coil 0.4–3 mm, strip up to 12 mm • Edge height: 14–64 mm • Minimum panel length: 140 mm • Minimum panel width: 50 mmInstalled Units / Equipment: • Automatic glue application unit • Pre-milling unit • Multifunction milling units R1 + R2 • Flat trimming unit • Corner rounding unit (Rondomat) • Radius profile scrapers • Flat scrapers • Polishing brushes • Cleaning liquid application unit • Motorized adjustment of units • Touchscreen control • IntelliSet system • FAST setting technology • ECO modeAdditional Information:The transport chain / output conveyor for finished panels is included with the machine.Availability:The machine is currently in daily production and can be inspected under power. Inspection and testing are possible by prior appointment.Available for collection from the beginning of September 2026.

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm Pgsdpfx Aoc S Di Rshmjr max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Year of construction: 2005, condition: ready for operation (used), A single-sided IMA edge processing machine for sizing, edge bonding and post-processing of wood panels is available. Min. workpiece dimensions X/Y/Z: 150mm/130mm/16mm, max. workpiece dimensions X/Y/Z: 2350mm/800mm/40mm, max. workpiece weight: 50kg, workpiece angle: 90°, material: particleboard/MDF, working height: 960mm. This is a complete system with conveying and peripheral units. Documentation available. An on-site inspection is possible. Pgsdezidi Sjpfx Ahmsr

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Condition: Functionally tested Equipment: Base machine Pgjdozu T Sgepfx Ahmor Extendable boom Joint milling unit 1801 Edge feed system, fully automatic 1903 Glujet 201 adhesive application system, cartridge Printing unit 1912-3, pneumatic Cutting unit 1918 Combination milling unit FR201 Pulling blade unit 1929 Chip collection box Surface pulling blade 1964 Location: Flörsheim Availability: Short-term

Condition: as good as new (ex-display), Edge banding machine as demo unit 5 units (aggregates): Joint trimming unit incl. AIGNER diamond joint cutter heads, with Konstantin DIA interchangeable knife system and controlled edge air-blast nozzle behind the second joint cutter head. End trimming unit: 1 motor, 2 saw blades Radius milling unit with Easy Set adjustment system Radius scraper unit, retractable, incl. - Extraction device with chip collection box for scraper shavings - with Easy Set adjustment system - 2 digital readouts Flat scraper unit with 4-way usable scraper blades. The unit is retractable. General features: - High-gloss package: tracing rollers for the radius milling unit, radius scraper unit, and flat scraper unit - Large viewing, noise, and safety enclosure for all processing units and the glue pot - Teflon-coated glue pot with energy-saving mode in standby - Glue application roller with feed screw for long and tall workpieces - Pressure zone with motor-driven 1st steel pressure roller + 1 rubber roller - Reel shear for edging 44 x 2 mm Technical data: Edge thickness: 0.4 – 2 mm Min. panel width: 120 mm Min. panel length: 90 mm Min. panel thickness: 10 mm Max. panel thickness: 40 mm Pgodpfx Ahjw Rcmyomsr Feed speed: 7 m/min Extraction connections: 3 x 150 mm Connection: 8 kW - 400 V / pneumatic: 6 bar

Condition: used, machine/vehicle number: 007694, Position 1: Panel Feeding and Loading HOMAG-PROFI KAL330/7/A3/WZ Position 2: Single Edgebanders HOMAG-PROFI KAL330/7/A3/WZ Pgsdpjwuuf Rsfx Ahmsr Position 3: Panel Return Systems HOMAG-PROFI KAL330/7/A3/WZ