Used Edge Breaker for sale (5,224)

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 3670-09-020, overall weight: 1,080 kg, total length: 1,493 mm, total width: 835 mm, total height: 1,719 mm, input voltage: 230 V, type of input current: DC, input frequency: 50 Hz, protection type (IP code): IP65, year of last overhaul: 2021, warranty duration: 36 months, SM-200-SA fabric bonding machine with fixed welding head. Hfodpfx Aowlhnmjacon

Condition: new, Year of construction: 2024, functionality: fully functional, working width: 14,000 mm, total length: 17,420 mm, total width: 14,000 mm, total height: 4,850 mm, overall weight: 37,000 kg, New scalping screen available from stock. Edge S18 Dual Power. Hsdpfx Aaov A S Nkscofn See brochure with all (technical) details. Shaking sieve, scalping screen, vorsieb

Condition: excellent (used), Year of construction: 2019, operating hours: 4,733 h, functionality: fully functional, fuel: diesel, Three fraction air separator + additional suction fan for midfraction. One owner machine. Hodjv Aailspfx Aacefn

Year of construction: 2023, operating hours: 1,200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 23TRT620048, EDGE TRT 620 demo machine - Immediately available Year of construction: 2023 Hours: 1050 Equipped with the following options: Hsdev Ewz Rspfx Aacefn - Remote control - Magnetic belt on the fine fraction - Load control on the bunker belt - Fine fraction belt 180 degrees rotatable - Reversing fan Drum screen / drum screen / drum sieve

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 1,500 kg, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, Low lift truck Condition: As good as new Technical condition: New Front tires type: Polyurethane Hsdpevzzl Eofx Aacefn Rear tires type: Polyurethane Support rollers, lithium-ion battery, 12 month guarantee

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm Hjdpexg Ix Sefx Aacofn - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: C-261-04-2523, feed rate X-axis: 9,000 m/min, saw blade diameter: 100 mm, rotational speed (max.): 12,000 rpm, Submitting a bid obliges you to collect the item by the deadline of 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, lip cuts, coil material Feed speed: 9 m/min Edge material thickness: 0.4–3.0 mm Hfjdjxhgk Aopfx Aacen Lip thickness: 0.4–3.0 mm Edge material height: 55 mm Coil diameter: 800 mm Rotation speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction port Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Coil material Max. tape cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Glue Applicator Rotation speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Edge material cross-section: 135 mm² Flush Trim Unit Rotation speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination tools r = 3 mm: 2 × Trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Control voltage: 24 V

Condition: used, Year of construction: 2010, total length: 5,250 mm, total height: 1,780 mm, total width: 1,060 mm, Weight: 1.500 kg Price: On request - Year: 2010 - Documentation available: No Hfjdpfx Aaewp D Udecsn - CE marking present: Yes - Serial number: 1969 - Transport dimensions: 5250mm x 1060mm x 1780mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Available now: a high-performance Holz-Her 1308XL Edge Bander, manufactured in 2020 and maintained to a very high standard. This compact, powerful machine is perfect for shops looking for professional edgebanding results with maximum efficiency and precision. Machine Details: Make/Model: Holz-Her 1308XL Year: 2020 Hfsdpfxjxlcfqo Aacsn Condition: Excellent – low hours, clean, and well-maintained Usage: Light commercial – ideal for joinery and cabinetry work Location: [Insert location] Availability: Immediate Key Features: Glu Jet system for PUR & EVA application Pre-milling unit for perfect edge prep Corner rounding for seamless finishes Touchscreen control panel with intuitive interface Fast heat-up time and energy-efficient operation Compact footprint with high-end capabilities This model offers professional-grade edge quality, ideal for kitchens, furniture, and interior fit-out production. Holz-Her’s build quality and user-friendly controls make this a standout choice for serious workshops.

Condition: refurbished (used), Year of construction: 2017, EDGEBANDER WITH NUMERICAL SETTINGS WITH EDGE DRESSER (ROUTER) & ROUNDING UNIT Brand: SCM Type (Model): K 360 HP-T-ER1 Serial no.: AH/120944 Ref: 123304 Year: 2017 (Photos taken before overhaul, before functional tests & before cleaning) MACHINING CAPACITIES : - Height of panel to be machined: 8 - 58 mm Thickness 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum width of panel to be machined: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - StarTouch control - Predisposition for barcode reading - Ø800 mm unwind tray - Front extension - Easy size: digital positioning of infeed guide and feed height - Non-stick spray unit - Edge straightener (RT-V) 12000 rpm - Infrared panel preheating at infeed - Gluing unit (VC-VM) with interchangeable glue container for 1 kg granules. Heating time 12 minutes Pneumatic pre-cutter Digitized positioning (pressing) with 3 rollers including 1 motorized and timed roller - Tilting butt-cutting aggregate 0-20° 12000 rpm - Digitized positionning top/bottom trimming unit with copying. Milling cutter 1/4 round 2 mm (or chamfer) 12000 rpm - R2mm rounding aggregate 12000 rpm with digitized positionn. Hfjdpfx Aaorx S Ipjcen - Scrapers R1&2 mm top/bottom with digitized positions - Straight scrapers top/bottom - Edge finishing spray device (Nebulization) OTHER FEATURES : - Grinder motors: 2x2 kW - Cutting motors: 2x 0.19kW - Up/down motor: 0.30 kW - Drive motor: 1.1 kW - Milling motor group: 2x 0.65kW - CE marking - Lockable contactor, Mushroom stops - Power supply: 380v. Three-phase 50 Hz - Pneumatic supply: 8-10 bars (max), dry air - Suction: 1x Ø100 and 5x Ø80 mm Heads: 780 m3/h Trimming 360 m3/h Scrapers 2x360m3/h Max. foreseeable footprint in running order : 10.80 x 2.40 m Transport dimensions (WxDxH) : 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with assembled tools, manual, spare parts list and drawings. On order, the machine will be overhauled and brought up to standard, with inspection and dynamic functional testing.

Year of construction: 2006, condition: excellent (used), Swing angle 135 Motor 1.1 kW table height 860 mm table surface 800×1000 mm spindle dimension 28 x 90 mm spindle speed 1500 rpm with feed unit: Fields S/308, year 2011 Hfjdjhr D Ayjpfx Aacsn and accessories

Condition: good (used), Circuit breaker, electrical circuit breaker, electronic circuit breaker -Manufacturer: Block, Electronic circuit breaker 24 V -Type: PCInput: DC 24 V / 70 A -Output: DC 24V / 8x 2-10A -Number: 2x circuit breakers available -Price: per piece -Dimensions: 125/40/H130 mm -Weight: 0.4 kg/piece Hfjdoxn Ik Depfx Aacon

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) Hodpfxelht Hwe Aacsfn F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Condition: used, Year of construction: 2008, total length: 7,500 mm, total height: 1,800 mm, total width: 970 mm, Weight: 5.500 kg - Number of units [pcs]: 8 - 1st unit type: Pre-milling unit - 2nd unit type: Glue unit - 3rd unit type: Cap unit - 4th unit type: Rough milling unit - 5th unit type: Rough milling unit - 6th unit type: Radius scraping unit - 7th unit type: Flat scraping unit - 8th unit type: Brushing unit - Tools available: Yes - Year: 2008 - Documentation available: No - CE marking present: Yes - Serial number: - Voltage [V]: 400 - Current consumption [A]: 43 - Fuse [A]: 50 - Transport dimensions: 7500mm x 970mm x 1800mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Hjdpjxakluefx Aacjfn Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1984, Technical data: Longitudinal travel (x-axis) 15,900 mm Horizontal feed path (z-axis) 790 mm Vertical feed path (y-axis) 500 mm Swivel range of the milling spindle 45°F +/- Milling spindle drive power of the DC motor 50 kW Milling spindle diameter in the front bearing 160 mm Inside tool holder ISO No. 50 DIN 2079 Outside tool holder ISO No. 60 Tool feed - manual via threaded rod M24 Spindle speeds continuously adjustable in 2 ranges from 50-500 rpm. Speed range in the 1st stage 50-250 rpm. Speed range in the 2nd stage 100-500 rpm. Step step 1:2 Range of constant power 160 rpm. Max. torque on the milling spindle 2,000 Nm Milling feed in the x-direction continuously adjustable from 40-4,000 mm/min. Rapid traverse 8,000 mm/min. Hfedpevvll Ssfx Aacsn Adjustment speed in the y and z-direction continuously adjustable from 20-500 mm/min. Rapid traverse for the y and z-axis 1,000 mm/min. Max. swivel speed for the milling spindle 2°/sec. Display resolution of the 3 axes (positioning accuracy) 0.1 mm Operating voltage 380 volts 50 Hz Control voltage 220 volts Distance from the clamping table to the retracted, horizontally positioned milling spindle nose 500 mm Distance from the cheek support (floor) to the middle of the milling spindle in the vertical middle position 1,300 mm Distance from the clamping table to the middle of the support guide 2,300 mm Length of the cheek and support guide 16,800 mm Weight approx. 23,000 kg Defects: some leaks on the clamping cylinders

Condition: good (used), Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, shunt releases -Manufacturer: Siemens, Sirius motor protection switch type 3VA1180-4EE36-OAAO -Device adapter: Rittal SV 9342.550 -Number: 1x switch available -Dimensions: 230/90/H205 mm Hsdpfxexnx A Ro Aacefn -Weight: 2.0 kg

Condition: new, Year of construction: 2025, Kündig edge sanding machine Uniq-S Edition 30 Top condition - available immediately - - Complete sanding unit can be tilted up to 45 degrees by motor without any table adjustment - Feed system integrated in the machine carrier, transport belt 50 mm wide at the bottom, pressure rollers 60 mm diameter at the top, motor 0.55 KW, speed infinitely variable 3 - 15 m/min - Can be operated from both sides with flat and contact sanding side - Sanding belt size 200 x 2000 mm - Belt drive motor 3 KW, 380 V, 50 Hz - Oscillation stroke programmable 10 - 90 mm - CE compliant/dust tested Standard version Kündig Uniq - S Accessories: - Q4 auxiliary table belt drive roller - Q6 semi-circular table belt drive roller Hjdpfx Aasvk R Arecsfn - Z04 table extension Location: from stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2007, total length: 5,200 mm, total height: 1,600 mm, total width: 1,200 mm, Weight: 1.550 kg Hfedpfx Asw Rd Tzsacsn Price: On request - Year: 2007 - Documentation available: No - Serial number: 1328 - Transport dimensions: 5200mm x 1200mm x 1600mm (l x w x h) - Transport weight [kg]: 1550kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Digital 3D edge finder MarTest 802 EW Working ranges X, Y, Z axis: - 2 to 4 mm iffernschrittwert_mm: 0.005 Hsdpoqff Rmjfx Aacjfn

Condition: excellent (used), Year of construction: 2001, Langzauner edge sander EK 3/4 top condition Accessories: some abrasives still available Veneer stop jaws Table width: 350 mm Table length: 1,000 mm Maximum sanding belt width: 150 mm Sanding belt length: 3,000 mm Belt speed: 22 m/s Hedovr Hw Iopfx Aacsfn Main motor: 2.2 kW Motorized feed Veneer sanding Circular sanding support Oscillation Height adjustment: table, manual Sanding belt pivotable: Yes Conformity marking: CE mark Total connection: 4.6 kW Space required: Length: 1.7 m Width: 0.85 m Height: 0.9 m Location: from stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2006, Price: On request - Year: 2006 - Documentation available: Yes - CE marking present: Yes - Serial number: 70239 Hodewp Dl Nspfx Aacjfn Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine must have. A solid cast iron sanding unit with a powerful powerful motor ensures maximum sanding performance. The working table, adjustable in height by spring pressure, allows optimum belt utilization and safe working. Belt oscillation, infinitely variable unit swiveling, and veneer unit, a veneer sanding device and an additional table for and an additional table for sanding work on the on the deflection roller. The machine is supplied with an assortment of sanding belts; an angle and miter fence is also included. Technical data: - Motor power: 2.2 kW - sanding belt size: 150 × 2280 mm - grinding belt speed: 22 m/sec. - table size: 750 × 350 mm - space requirement: 1000 × 800 mm - weight: from 180 kg - Suction Ø: 100 mm Hodpfxed R Ev Dj Aacofn Location: Ex warehouse 54634 Bitburg - free loading - Can be shipped for a fee

Condition: used, Year of construction: 2010, Double Belt Sander Holytek PW 12 H Year of construction 2010 OscillatingMin/max working width 180/1200mm Min/max working thickness 10/250mm Sanding belt size 3730x270mm 2x Engine 7.5 HP Machine dimensions 2500x2250x1700mm, weight 1500kg Hjdpfewnhuxox Aacefn - Year: 2010 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hsdei Am U Depfx Aacsfn F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: used, Year of construction: 2013, total length: 4,800 mm, total height: 1,700 mm, total width: 900 mm, Weight: 1.250 kg Price: On request Edgebander Serial number: 200.04.007.13 400V 11kW Hfjdpfxjwlv D Ne Aacon 3PH 50HZ 28A multifunction trimming unit Glue unit Workpiece height 8-60mm - Year: 2013 - Documentation available: No - Serial number: 200.04.007.13 - Transport dimensions: 4800mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1250kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels