Used Casadei Edgebander for sale (83)

Condition: ready for operation (used), Year of construction: 2022, General Data Measurements height 1445 mm Dimensions Godpfox D Icfsx Ag Rjbg Machine Length 2740 mm This CASADEI Bordatrice E350PM was manufactured in 2022. It features a panel height range of 10-45 mm and supports edge band thickness from 0.4 to 2 mm. The machine operates at a feed belt speed of 7 m/min, with a glue pot heating power of 1490 W. Consider the opportunity to buy this CASADEI Bordatrice E350PM edgebander. Contact us for more information. Application Types Edge Banding

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Automatic edge banding machine for pre-glued edges Gbsdpfx Agswfw A Hs Rog

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: AH/119433, Touch screen control monitor Premilling heads Spray system in front EVA hotmelt glue station (2pcs.) Premelting unit Infrared ceramic lamp Endcutting unit Trimming unit Corner rounding unit Round 4/A - pneumatically changed for two corners (1mm and 2mm) Edge (corner) scraping unit SCR/S (pneumatically changed between two radius scraping - 1mm and 2mm) Glue (flat scraping) unit Oscilating brushing unit Hot air for edge finish Panel thicness 10 ÷ 60 mm Gbodpfx Aev R Hagsg Rjg Edge thickness 0,4 ÷ 15 mm Feed speed 10-22 m/min It has no servo drives, but due to pneumatic changes of corner units and scraper - it can be adjusted to work with 3 edge dimensions - rough trimming for 0.4mm, and with the corner units (4pcs.) 1mm and 2mm edge.

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in two belt version immediately available - ex stock 54634 Bitburg Technical data grinding width 1100 mm Min. / max. working height 4 /170 mm Sanding belt width 1115 mm grinding belt length 1900 mm feed speeds 4,5 / 9 m/min feed motor 0,33/0,55 kW Table adjustment motor power 0,25 kW Drive motor power 11 kW Electrical voltage 400 V Phase(s) 3 Ph Mains frequency 50 Hz Length 1650 mm Width/depth 1820 mm Height 1960 mm Illustration with optional equipment Wide belt sander as double belt version up to 1100 mm with many equipment options for the price-conscious craftsman's workshop Robust tube-stiffened monoblock steel machine body with working units mounted high up for maximum rigidity User-friendly due to clear control panel on the front side Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start for main motor Natural rubber feed carpet with negative profile Support table with two rollers in the infeed and outfeed of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Gbodscr S Ecspfx Ag Rjg Rubber pressure rollers, in front and behind each working unit Pneumatic belt tensioning for each unit with decimal correction possibility of the core/ belt strength Quality - Made in Europe Execution RTC 1. aggregate with bevelled steel roller Ø 120 mm and fine adjustment for calibration 2. aggregate combination aggregate with fine adjustable working height for calibrating and fine grinding with rubber coated roller Ø 120 mm (45 Sh) and hard grinding shoe with graphite coating on exchangeable insert Scope of delivery: Working table height adjustment with electronic display of working height. Oscillation of the sanding belts with electronic system Rubber coated grooved pressure roller at the infeed 1° position with anti-reverse device (C.E.) Star-delta start-up of the main motors Grooved steel calibration roller Selector switch for positioning the grinding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic carpet centering Location: Ex stock Bitburg - at special price

Condition: new, -Sturdy steel and gray cast iron construction -Dynamically balanced milling unit anchored to the work table -Extremely robust construction -Smooth operation thanks to precision units and high dead weight -Comes with right-hand/left-hand rotation and electronic locking when changing direction as standard -Five speeds from 3000 - 10000 rpm -Speed changes are easily and conveniently performed from the machine side -Comes with an MK 4 interchangeable spindle system as standard -Large gray cast iron work table for lasting precision -Easy handling thanks to controls and a speed display on the front of the machine -Large milling stop with fine adjustment and aluminum stop jaws as standard -Stop adjustment via crank handle -Numerical display of the set spindle height, accurate to within a tenth -Powerful industrial motors Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Weight (net) approx.: 510 kg Extraction connection: - Number of extraction nozzles: 2 - Extraction nozzle diameter: 80 mm - Number of extraction nozzle stops: 1 - Extraction nozzle stop diameter: 120 mm Work table: - Work table length: 2500 mm - Work table width: 810 mm Gjdpfx Asu T Hhkeg Rjbg - Table height: 923 mm Installation information: - Explanation of space requirements: The dimensions take into account the maximum travel distances or usable lengths. - Working area length: 3700 mm - Working area width/depth: 5000 mm - Explanation of working area: Please add the specified dimensions to the space required to determine the recommended free space for the machine. Features: - Router stop: Heavy-duty professional design with aluminum stop jaws and fine adjustment, adjustable from the front via a crank with a numeric digital display - Curved router guard - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Controls: manual height and tilt adjustment of the router unit - Position of control elements: on the machine body - Table design: table extension left and right and extendable workpiece support (total width 2500 mm) Electrical data: - Supply voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Router spindle: - Spindle tilt: -45 – +45 ° - Usable spindle length: 140 / 180 mm - Explanation of usable spindle length: for spindle diameter 30 – 35 / for spindle diameter 40 – 50 mm - Milling spindle stroke: 90 mm - Changeable spindle: MT 4 - Spindle speed(s): 3000/4500/6000/8000/10000 rpm Maximum milling tool diameter: - Maximum lowerable tool diameter: 320 x 60 mm - Maximum tool diameter for profile milling: 250 mm - Maximum tool diameter for tenon milling: 350 mm - Maximum tool diameter for form milling: 160 mm

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, total width: 2,000 mm, total height: 2,070 mm, total length: 1,800 mm, grinding width: 1,350 mm, power: 11 kW (14.96 HP), grinding belt length: 2,150 mm, grinding belt width: 1,370 mm, extraction nozzle diameter: 200 mm, power of feed motor: 800 W, input voltage: 400 V, Slight signs of wear from demonstration. The LIBRA 45 is characterized by a rich range of standard equipment, a very robust construction (both the base frame and the work units), sanding shoes with a larger contact surface and modern control systems Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start-up Natural rubber feed carpet with negative profile Automatic carpet centering Support table with rollers at the inlet and outlet of the feed carpet Large sanding roller diameter 140 mm Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of and behind each work unit Pneumatic belt tension for each unit with decimal correction option for grain size/belt thickness Equipment: Work table height adjustment with electronic display of the working height Oscillation of the sanding belts with electronic system Rubber-coated grooved pressure roller at the inlet 1° position with Backflow protection (C.E.) Star-delta start of the main motors Gsdovxu E Hjpfx Ag Robg Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Extraction connection Extraction nozzle diameter 2 x 200 mm Electrical data Power of height adjustment motor 0.25 kW Power of feed motor 0.8 kW Power of drive motor 11 kW Connection voltage 400 V Mains frequency 50 Hz Grinding unit Grinding belt length 2150 mm Grinding belt width 1370 mm Grinding width max. 1350 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Height min. 4 mm Height max. 170 mm

Condition: used, Year of construction: 2006, Spindle moulder, milling machine Casadei F222L Spindle diameter: 50mm Tiltable 45 degrees. Serial number: 06T3001 Weight: 891 kg 10 KW 400 V Including Maggi feeder - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 06T3001 - Main motor power [kW]: 10 - Spindle diameter [mm]: 50 - Tiltable spindle: Manual - └ Max. tiltability [°]: 45 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gbjdswnhybopfx Ag Rjg Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2020, Working width 1100mm Width of the belts 1115 mm Development of 1900mm bands Working height min max 4/170mm Steel inlet roller - rubber roller - steel outlet roller Finishing skate Probe a panel Main engine power 11kw-15hp Motor power drive 0,4kw-0,7cv Two drive speeds 4.5/9m/min Voltage 380 V Gbedpfxjx A D Are Ag Rjg

Condition: new, Year of construction: 2023, machine/vehicle number: MR005075, The Xenia 40 is the best-selling panel saw from the Xenia range. This is the M version, featuring electric height and tilt adjustment, with digital readout for both the saw blade's height and tilt angle. Price is for a ready-to-use machine, including cable, plug, and saw blades, ex Staphorst. Technical specifications: - Serial number: AB00031368 Godpfxoxlyyfj Ag Rebg

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide belt sander with combined sanding unit Gedpfx Aogf Sw Neg Rjbg Action equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning with push button Item number: 5222100A2 Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Entry model for smaller companies Working width 950 mm Equipment details Combination unit for calibrating and grinding Angled steel roller Ø 120 mm with fine height adjustment Hard grinding shoe with graphite support Universal design for calibrating

Condition: new, -Sturdy steel and gray cast iron construction -Large, ribbed gray cast iron planing tables -Smooth operation due to high weight -Four feed speeds -Motorized thicknessing table lift with two speeds and digital display -Articulated pressure bar in the infeed -Precision-mounted four-knife shaft -Helical-toothed steel feed roller for particularly even and gentle wood feed Gbedpfxju T Hq So Ag Reg -Rubber-coated feed roller -Large planing stop, tiltable from 90 to +45° -Standard auxiliary stop -Powerful industrial motor -Pneumatic quick-change system with pneumatic raising and lowering of the planing table -The extraction connection position is always in the same place for both planing and thicknessing, eliminating the need for an additional extraction hose or the need for cumbersome reconnection and repositioning around the machine required Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 2300 mm - Width/depth (product) approx.: 1100 mm - Weight (net) approx.: 980 kg Planer: - Total length of tables: 2300 mm - Work table length: 1200 mm - Planer table width: 520 mm - Working height: 930 mm - Max. chip removal for planer: 6 mm - Planer stop length: 1200 mm - Planer stop height: 190 mm - Planer stop swivel range: 90 – 45 ° Extraction connection: - Extractor nozzle diameter (thickness): 120 mm Installation information: - Space required (length): 2300 mm - Space requirement width/depth: 1610 mm - Explanation of space requirement: The dimensions take into account the maximum travel distances or usable lengths. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness: - Thickness table width: 520 mm - Minimum working height (thickness): 3.5 mm - Maximum working height (thickness): 250 mm - Maximum chip removal (thickness): 8 mm Electrical data: - Drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer block: - Planer block type: TERSA - Planer block diameter: 120 mm - Number of planer knives: 4 - Planer block speed: 5000 rpm - Maximum planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: new, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 170 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, grinding belt width: 115 mm, CASADEI LIBRA 35/2 RTC 110 Standard Equipment Two-belt version with 1100 mm sanding width for the cost-conscious tradesman. The LIBRA 35 calibration and fine grinding machine is an extremely versatile and versatile machine. Robust tubular-reinforced monoblock steel machine body with high-mounted working units for maximum rigidity. User-friendly thanks to the clearly laid-out control panel on the front. Motorized table height adjustment. Digital display for the working height. Electronically controlled sanding belt oscillation with reduced compressed air consumption. 1st unit: 120 mm diameter, slanted steel roller with fine adjustment for calibration. Pneumatic on/off of the roller. 2nd unit: Combination unit with finely adjustable working height for calibration and fine grinding: 120 mm diameter rubber-coated roller (45 Sh), hard sanding pad with graphite coating on a replaceable insert. Pneumatic roller on/off Electronic sanding pad, 56-sector spacing Electronic control system FOX 500 KTR Electronic working thickness adjustment Automatic carpet centering ✔ Automatic star-delta start-up for main motor Natural rubber feed carpet with negative profile Support table with two rollers at the inlet and outlet of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Gbodpfxowa Dbxj Ag Rog Rubber pressure rollers in front of and behind each working unit Pneumatic belt tensioning for each unit with decimal adjustment of grit/belt thickness Length approx. 1650 mm Width/Depth approx. 1820 mm Height approx. 1960 mm Extraction connection Number of extraction nozzles: 2 Extraction nozzle diameter: 140 mm Electrical data Height adjustment motor power: 0.25 kW Feed motor power 0.33/0.55 kW Drive motor power 15 kW Connection voltage 400 V Line frequency 50 Hz Grinding unit Grinding belt length 1900 mm Grinding belt width 1115 mm Maximum sanding width 1100 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. height 4 mm Max. height 170 mm #### For many years, we have maintained a partnership-based sales concept with specialist dealers, which is why orders are processed through a recommended partner coordinated with you.#####

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Like-new condition Features and technical specifications: Total table length: 2720 mm Infeed table length: 1498 mm Maximum planing depth: 8 mm Planer fence length: 1200 mm Planer fence height: 190 mm Swivel range of fence: 90 – 45° Dust extraction connection: Extraction port diameter (thickness): 120 mm Installation information: Required length: 2750 mm Required width/depth: 1604 mm Note on space requirement: Dimensions account for maximum travel paths or usable lengths. Electrical data: Drive motor power: 7 kW Connection voltage: 400 V Mains frequency: 50 Hz Cutterhead: Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of knives: 4 Cutterhead speed: 5000 rpm Maximum planing width: 520 mm Dimensions and weights: Length approx.: 2750 mm Width/depth approx.: 1500 mm Weight approx.: 720 kg Availability: short-term Location: Röllbach Gedpfx Agswka Txe Robg

Condition: used, Year of construction: 1994, Dowel hole drilling unit: spacing 16, 22, 25, 32 Gedpfxox I Aiqj Ag Rjbg Drilling depth: 145 mm Slot length: 240 mm Height adjustment travel: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Hold-down clamp: manual Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg

Condition: new, Year of construction: 2025, Motorized thicknessing table stroke with two speeds Numerical display for working height Grey cast iron thicknessing table The thicknessing table is mounted on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thicknessing table Noise and chip protection curtain at workpiece infeed and outfeed as standard Adjustable roller contact pressure Front infeed roller with helical toothing Godpoff Efaofx Ag Rjbg Pull-out roller with rubber coating Powerful industrial engine Equipment details Models TERSA with Tersa planer blade shaft Planer blade change in seconds When the machine is started, the planing knives are automatically clamped by centrifugal force - self-locking The blade projection adjusts automatically without using setting gauges Work table The work table is supported on four large trapezoidal threaded spindles, which ensure maximum stability in all working conditions With electrical table adjustment as standard Due to the special lifting device, the table position is maintained even without locking Helical toothed steel feed rollers for a constant and even wood feed second, rubberized feed roller at the outlet Massive recoil protectors prevent the recoil of workpieces A 4-knife shaft ensures an optimal planing pattern Dimensions and weights Length approx. 1305 mm width/depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Suction nozzle diameter thickness 150 m

Condition: new, -Motorized thicknessing table lift with two speeds -Numerical display for working height -Gray cast iron thicknessing table -The thicknessing table is mounted on four large trapezoidal thread spindles for maximum stability and precision -Four feed speeds -Optional with two rollers in the thicknessing table -Standard with noise protection and chip protection curtains at the workpiece inlet and outlet -Adjustable roller contact pressure -Front feed roller with helical gearing -Rubber-coated feed roller -Powerful industrial motor Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 1305 mm - Width/depth (product) approx.: 1080 mm - Weight (net) approx.: 750 kg Extraction connection: - Extraction nozzle diameter, thickness: 150 mm Installation information: - Space required length: 1305 mm - Space required width/depth: 1080 mm Gedpfx Agju T Hq Eo Robg - Space required height: 1197 mm - Explanation of space requirements: The dimensions take into account the maximum travel distances or usable lengths. - Machine body length: 1305 mm - Machine body width/depth: 725 mm - Working area length: 1000 mm - Working area width/depth: 2000 mm - Explanation of the working area: Please add the specified dimensions to the space required to determine the recommended free installation area for the machine. Thickness: - Thickness table length: 630 mm - Thickness table width: 1000 mm - Minimum working height (thickness): 3.5 mm - Maximum working height (thickness): 300 mm - Minimum working length (thickness): 210 mm - Maximum chip removal (thickness): 8 mm Electrical data: - Drive motor power: 9 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer block: - Planer block type: TERSA - Planer block diameter: 120 mm - Number of planer knives: 4 - Planer block speed: 4500 rpm - Maximum planing width: 630 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 5 h, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,270 mm, cutting width at rip fence: 1,270 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, height adjustment type: electric, overall weight: 1,000 kg, rotational speed (min.): 2,500 rpm, rotational speed (max.): 5,000 rpm, type of input current: three-phase, input voltage: 400 V, power: 9 kW (12.24 HP), Equipment: scorer, Robust steel and grey cast iron construction • Standard with three speeds • Equipped as standard with NC control and 7-inch LCD display for setting all machine axes • Saw unit with permanently precise dual pivot segment guide, 6-year Holzkraft warranty on wear of pivot segments • Electrical positioning of cutting height and saw blade tilting • Scoring saw unit with separate scoring motor • Powerful industrial motors • Smooth-running and precise sliding table made of anodised aluminium with proven, permanently smooth ball contact system on hardened rails, 10-year warranty on wear of guide tracks • Large support surfaces thanks to standard table extension and width extension • Grey cast iron saw table • Folding parallel fence with fine adjustment and round bar guide • Crosscut fence, extendable to 3200 mm, with two flip stops and eccentric clamp Gbodpfx Aewz Nzyjg Rjg • Particularly large outrigger with material roller, extendable to 2400 mm • Side-swivelling saw blade pendulum guard with integrated extraction port • Optionally available: mitre fences extendable up to 1500 mm for mounting directly on the sliding table • Numerous equipment options for individual customisation

Condition: new, Year of construction: 2025, Motorized thickness table hub with two speeds Numerical display for working height Thicknessing table in cast iron The thicknessing table is supported by four large trapezoidal thread spindles for maximum stability and precision Four speeds Optional with two roles in the thicknessing table Equipped with noise and chip protection curtain at the factory Tueckein and outlet Adjustable roll pressure Front feed roller with helical gearing Pull-out roller with rubber coating Powerful industrial motor Gsded Hx E Iepfx Ag Rsbg Equipment details Models TERSA with Tersa Planer knife shaft Planer blades change in seconds When starting the machine, the blades are automatically tensioned - self-arretierend by the centrifugal force The knife protrusion will automatically without the use of setting gauges Work table The working table is supported by four large trapezoidal screw spindles provide greatest stability under all operating conditions As standard with electric table adjustment The Special lifting device correctly maintain the table position, also without lock Helical steel feed rollers for a constant and uniform wood feeding Second, rubber feed roller in the spout Massive arrestors prevent kickback of workpieces A 4-meter shaft ensures an optimal planing image Dimensions and weights Length approx. 1170 mm Width/depth approx. 1003 mm Weight approx. 660 kg Connect dust extraction

Condition: new, -Large planing tables made of gray cast iron -The planing table is adjusted using a precise parallelogram system, ensuring that the distance between the table tips and the cutter block remains constant in every adjustment position. -The large, sturdy planing stop made of anodized aluminum is easily movable and can be tilted from 0° to 45°. -The angle of the stop can be read from the workstation. -Comes with auxiliary stop as standard. -Large four-knife block with precision bearings. -Smooth operation thanks to the precision unit and the heavy-duty cast iron construction. -Powerful industrial motor. -Maximum user safety with simple operation. -Scale display for chip removal. -Manual table adjustment. -Motor protection switch. Equipment details. -Incl. Foldable auxiliary stop for narrow workpieces -Manual quick adjustment of the chip removal with scale & clamping head Gbodpou T Hrcofx Ag Rsg The guard -The guard is foldable and designed to not hinder the operator while working, while simultaneously protecting them. TERSA models with Tersa planer knife shaft system -No more adjustments or screwing -Planer knife changes in seconds -Self-locking -Extremely quiet -Perfect planing results Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 2750 mm - Width/depth (product) approx.: 1500 mm - Weight (net) approx.: 680 kg Planer: - Total length of tables: 2720 mm - Work table length: 1498 mm - Maximum chip removal for planer: 8 mm - Planer stop length: 1200 mm - Planer stop height: 190 mm - Planer stop swivel range: 90 – 45° Extraction connection: - Extractor nozzle diameter (thickness): 120 mm Installation information: - Space required (length): 2750 mm - Space required (width/depth): 1604 mm - Explanation Space requirements: The dimensions take into account maximum travel distances or usable lengths. Electrical specifications: - Drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer block: - Planer block type: TERSA - Planer block diameter: 120 mm - Number of planer knives: 4 - Planer block speed: 5000 rpm - Maximum planing width: 520 mm

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 17456, cutting length (max.): 3,200 mm, cutting width (max.): 1,270 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, overall weight: 1,000 kg, pivoting range: 45 °, power: 7 kW (9.52 HP), Equipment: motor brake, scorer, New machine built in 2021, serial number: Stable steel and gray cast iron construction With three speeds as standard With NC control with 7 inch LC display as standard for adjusting all axes of the machine Saw unit with permanently precise double swivel segment guide, 6-year Holzkraft guarantee on wear of the swivel segments Positioning of the cutting height and the saw blade swivel electrically Scoring unit with separate scoring motor Powerful industrial motors Smooth and precise format sliding carriage made of anodized aluminum with proven and permanently smooth ball contact system on hardened, 10-year guarantee on wear of the guideways Gbedpfsvxvbpsx Ag Rjg Large support surfaces thanks to standard table extension and widening Gray cast iron saw table Fold-down parallel stop with fine adjustment and round bar guide Crosscut stop, extendable up to 3200 mm, with two folding stops and eccentric clamp Particularly large boom with material roll, extendable up to 2400 mm Saw blade pendulum guard that can be swung away to the side with integrated suction nozzle Optionally available: mitre stops that extend up to 1500 mm for attachment directly to the sliding carriage Numerous equipment options for individual adaptation

Condition: excellent (used), Year of construction: 2020, Compact wide-belt sanding machine with combination sanding unit With special offer equipment – Top condition – Special offer equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with button control Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding shoe for fine sanding Standard with diagonal-grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel on the front side Robust tube-reinforced monoblock steel machine body, robot-welded, with work units positioned high up for maximum rigidity Motorized table height adjustment with digital display Electronically controlled sanding belt oscillation Feed carpet driven by gear motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning per unit with decimal correction possible for grit/belt thickness Gjdpfxoxac E Hj Ag Robg Universally applicable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonal-grooved steel roller Ø 120 mm with fine height adjustment Hard sanding shoe with graphite pad Universal version for calibration and sanding of solid wood, chipboard, and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/depth (product) approx. 1545 mm Connection for extraction Extraction port diameter 140 mm Electrical data Connection voltage 400V Current type AC Phases 3Ph Line frequency 50Hz Feed motor power 0.33 / 0.55 kW Table height adjustment motor power 0.25 kW Drive motor power 7.5 kW Sanding unit Sanding belt length 1525 mm Max. sanding width 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. workpiece height 4 mm Max. workpiece height 170 mm Location: ex stock 54634 Bitburg - Immediately available -

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 5 h, functionality: fully functional, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, power of the milling unit: 750 W, type of input current: three-phase, tank capacity: 1 l, Automatic edge banding machine with chain feed and pre-milling unit Sample machine built in 2022 Equipment: Touch ME "7" screen control Gbjdpfewa Ag Tjx Ag Rog Glue container quick-change kit Multifunctional trimming unit Radius scraper unit Surface scraper unit LED interior lighting

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - table milling machine with tilting milling spindle and table extensions Table milling machine with tiltable milling spindle from -45° to +45 Sturdy cast steel construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running due to precision aggregates and high dead weight Standard with right-left rotation and electronic blocking when changing direction 5 speeds from 3000 - 10000 min-1 Speed change is easy and convenient from the machine side Standard with MK 4 change spindle system Large work table made of cast iron for long-lasting precision Easy handling due to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence jaws as standard equipment Powerful industrial motors Equipment details: Fraes fence Fraes fence with crank/handwheel adjustment from the front side With numerical display Interchangeable spindle Interchangeable spindle MK 4 standard on all CASADEI F 23 and F 25 models Option sliding carriage Option sliding carriage for small tenoning operations and for slotting Scope of delivery: Manual tiltable milling spindle from +45° to -45°. Speed indication via LED at the front Aluminum stop jaws Sheet milling protection cover Right-left rotation of the milling spindle MK 4 interchangeable milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display table extension left and right (2500 mm length) extendable workpiece support (2500 mm length) Gjdpfx Ajdqzcxog Robg Model CASADEI F 25 LL FK article no. 5220728 Technical data Dimensions work table 2500 x 810 mm Milling spindle tilting range +45 to -45 degrees useful length of spindle at Ø 30-35 mm 140 mm useful length of spindle at Ø 40-50 mm 180 mm milling spindle stroke 90 mm max. tool Ø profiling 250 mm max. tenon tool Ø 350 mm max. milling tool Ø 160 mm max. tool-Ø lowerable 320 x 60 mm speeds, 5-stage 3000/4500/6000/ 8000/10000 min¯¹ motor power 400 V / 50 Hz / S6-40% 7 kW weight 480 kg suction nozzle-Ø stop 1 x 120 mm suction nozzle-Ø under table 2 x 80 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2022, E450PM - AUTOMATIC EDGE BANDING MACHINE V000047 LME450PM-5 with joint trimming unit Machine in excellent condition VOLTAGE 400/50/3 CONTROL WITH 7" TOUCH SCREEN EXCHANGEABLE GLUING UNIT VR - MULTIFUNCTION TRIMMING UNIT Tool for straight/radius trimming TOOL KIT R=2 mm FLAT SCRAPER RELEASE AGENT UNIT LED INTERNAL LIGHTING Gbodpfexac Hwox Ag Rsg DOCUMENTATION IN GERMAN INFRARED LAMP for panel pre-heating SCRAPER UNIT Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2022, Casadei Panel Saw Xenia 40, Year 2022 Robust steel and cast-iron construction ensures precision, smooth running, and durability Smooth-operating, precise sliding table made of anodized aluminum with a proven and long-lasting ball-contact system on hardened guides – 10-year warranty on wear of the carbide guide rails Six-year HOLZKRAFT warranty on wear of the tilting segments of the saw unit Cast-iron saw table Large support surfaces thanks to standard table extension and table widening Fold-down rip fence, manually adjustable with fine adjustment Angle-adjustable crosscut fence, extendable up to 3200 mm, with two flip stops Outrigger with material support roller TECHNICAL DATA Dimensions and Weights Weight (net) approx. 661 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter (saw blade guard): 80 mm Setup Information Transport width: 1,150 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.9 kW Output power (motor): 7.0 kW Duty cycle drive motor: S6 Duty cycle duration drive motor: 40% Sliding Table and Table Crosscut frame length: 3,200 mm Saw Unit Cutting width with rip fence: 1,270 mm Max. crosscut width to the left of the saw blade: 3,200 mm Saw blade tilt: 90 - 45° Max. cutting height at 90°: 140 mm Gsdpjxac R Aofx Ag Rsbg Max. cutting height at 45°: 99 mm Saw blade diameter: 400 mm Saw blade speed: 3,700 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 8,500 rpm FEATURES Equipment Scoring unit Anodised aluminum sliding table Handle for sliding table Material roller on crosscut frame Saw rip fence with round bar guide Stops: professional flip stops Table widening Table extension Saw blade pendulum guard Location: ex stock 54634 Bitburg - Immediately available -