Used Drilling Machine Drill Press for sale (68,341)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 173180025, empty load weight: 975 kg, working height: 50 mm, working width: 3,000 mm, working length: 3,000 mm, Equipment: CE marking, TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 3,000 mm Working area, Z-axis: 50 mm Horizontal drilling spindles: 4 MACHINE DETAILS Power of main motor: 3 kW Voltage: 400 V Current consumption: 3 A Dimensions & Weight Dimensions (L x W x H): 1,750 x 1,800 x 1,800 mm Net weight: 975 kg Transport packages: 1 Gedpfx Ajy Tu Uioi Njiu EQUIPMENT CE marking Horizontal drilling machine Vertical drilling machine Saw unit included

Condition: used, Radial drilling machine MAS VR4A The machine is located in an operating facility in Bremen and can be tested there. Technical data MAS VR 4A Gjdpfjzcy Aiox Ai Neiu Max. drilling diameter in steel (50 kg/mm²) 50 mm Max. drilling diameter in gray cast iron (25 kg/mm²) 60 mm Max. reaming diameter in steel (with guide) 200 mm Largest thread in steel M30 Largest thread in gray cast iron M42 Distance from spindle center to rotary table guide (max.) 1,250 mm Distance from spindle center to rotary table guide (min.) 320 mm Largest hole circle diameter 2,940 mm Smallest hole circle diameter 1,105 mm Distance from spindle to base plate (max.) 1,340 mm Distance from spindle to base plate (min.) 280 mm Vertical adjustment of the cantilever arm 750 mm Horizontal adjustment of the drilling slide 930 mm Swivel range of the cantilever arm 360° Clamping surface of the base plate 1,475 × 900 mm Height of the base plate 200 mm T-slots 3 × 25 mm T-slot spacing 190 mm Diameter of the drilling spindle head 70 h6 mm Spindle mount Morse taper MK4 Diameter of the drilling spindle 40 mm Stroke of the drilling spindle 310 mm Number of speed steps 16 Speed range 28 – 2,500 rpm Number of feed steps 16 Feed range 0.05 – 2 mm/rev Power of the drilling motor 4 kW Speed of the drilling motor 1,420 rpm Power of the feed motor 1.5 kW Speed of the feed motor 1,400 rpm Power of the hydraulic motor 0.55 kW Speed of the hydraulic motor 1,400 rpm Power of the coolant pump 0.125 kW Speed of the coolant pump 2,800 rpm Total weight 2,700 kg Total power requirement 7 kW Machine dimensions (L × W × H) 2,250 × 1,055 × 2,970 mm ____ Our general terms and conditions apply. Furthermore, the seller is not liable for typing or data transmission errors. The information and images were provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: good (used), Year of construction: 1997, 4-head drilling machine Giedpszc Hbrjfx Ai Neu

Condition: good (used), Year of construction: 1998, working area 3 - 50 mm lip angle 40-180 ° drill diameter 3-50 mm weight of the machine ca. 0,18 t dimensions of the machine ca. LBH 0.9 x 1,0 x 1,40 m Incl. workpiece head for switchable 1:1 / 1:2 ratio Giodpfxezczhge Ai Neu Incl. special web-thinning attachment for split-point grinding Incl. 6-jaw chuck Incl. work light Incl. operating manual

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 300 mm, stroke length: 350 mm, bending angle (max.): 180 °, pressing force: 82 t, sheet thickness steel (max.): 30 mm, sheet thickness copper (max.): 30 mm, lifting speed: 10 mm/s, bending force (max.): 82 t, Stierli bender 820HE Horizontal bending and straightening machine, with manual control and stroke fine adjustment system STRAIGHTENING with this horizontal press: Fast and precise straightening for welding parts, profiles, beams, sheets, pipes, flat steel, etc.... BENDING with this horizontalpress: Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Godpfegqfmnox Ai Noiu Bending pressure 82 tons Tool height 300 mm Stroke 0-300 mm stepless Bending capacity 300x20mm (up to 300x30 with large V-block) S235 Straightening power for HEA260 Bending and straightening program via selector switch Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: new, 18 mm M 12 M 14 MK 2 225-4.300 U/min. spindle stroke 80 mm throat 190 mm column diameter 65 mm 300x240 mm 2 x 12 x 80 mm 75/357 mm Giodpsyv Nddefx Ai Neu 300x240 mm 2 x 12 x 80 mm 437/437 mm feed von Hand Handkurbel total power requirement 0,37/0,55 kW Machine height 840 mm weight 120 kg Standard equipment: - Main switch with motor protection switch lockable - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection Option 12 - LED machine light, with radially adjustable light beam, power rating 230 V, protection class IP 65

Condition: used, 4 Kopf Bohrmaschine / 4 head Paper Drilling machine Nagel Citoborma 480 AB Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Gijdozcfwfopfx Ai Neu On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Hole rows + fitting drilling machine LAUTENSCHLÄGER Meplamat 300 pneumatic hold-down device, pressing device, Giedpfsvtm Ayox Ai Nsu stop rulers

Condition: new, Drilling and Milling Machine OPTIMUM OPTImill MB 4 - Exhibition Machine - This offer is for an equipment package. The following items and options are already included in the price: - Drilling and milling machine OPTImill MB 4 Optimum - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM Giodpfsu R Tftox Ai Nou - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) Gisdpfeu R Sxxox Ai Nsu - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: defective spare-parts repository (used), Year of construction: 1971, machine/vehicle number: 9604, functionality: not functional, tool diameter: 50 mm, spindle mount: MK 5, rotational speed (max.): 1,700 rpm, total width: 1,100 mm, total length: 2,600 mm, total height: 3,500 mm, overall weight: 4,000 kg, Function: Turret hub defective (does not move up or down) Drilling capacity (steel): 50mm Gedezcqcmopfx Ai Neiu Speed: 1700 rpm Overhang: 45mm - 1500mm Workpiece height range: 470mm - 1500mm Sleeve travel: 680mm, quill travel: 350mm Spindle mount: MK5 Max. tool weight: approx. 30kg Machine dimensions X/Y/Z: approx. 2600mm/1100mm/3500mm Weight: approx. 4000kg An on-site inspection is possible.

Condition: used, Bench drill, gear drill ALZMETALL Type AB 40 ST Production drill Manufacturer No. 750 Year of manufacture 1994 Drilling capacity 40 mm Spindle mount MK 4 - short quill Overhang 325 mm Quill stroke 200 mm Table size 740 x 460 mm Height adjustment of drill head 700 mm Distance spindle-table max. 1015 mm Spindle speed 56 - 2500 rpm 12 gear stages Automatic feed 0.15 - 0.2 - 0.3 - 0.36 mm/rev Motor power 4 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 12 gear stages - Drilling and threading device with right and left rotation - Electric foot switch for switching the direction of rotation to left for thread cutting interruption - Rapid traverse via hydraulic quill movement - Semi-automatic operating sequence: rapid traverse - working feed - rapid return - Drill head height adjustment via hand crank - Table height adjustment via hand crank (table height from 740 to 1170 mm) Gsdpfx Aeza Hzgsi Noiu - Coolant system - Control cabinet on the back of the machine - Mounted on a steel plate (1300 x 750 x 15 mm) with machine feet - Quick-change drill chuck METABO 3 to 16 mm - Operating manual and electrical diagram Overall height with drill head at the top 2750 mm Space requirement L x W x H 1400 x 850 x 2300 mm Weight 1250 kg Good condition

Condition: excellent (used), Year of construction: 1989, Column drilling machine, make GILLARDON, type: GB 45 VE, year 1989, in good condition. Equipped with thread cutting device, coolant system, machine lamp, machine documentation. Spindle taper: MT 4 Spindle speeds: 40–1100 rpm, motor power: 2.2 kW Maximum drilling capacity in steel: 45 mm – 55 mm Gijdpfxsx Hr Ako Ai Neu Maximum drilling stroke: 200 mm 3 feeds: 0.1–0.16–0.25 mm/rev Maximum thread cutting in steel: M42 / M60 Table size: 560 mm x 450 mm Required space: 1.3 m x 0.8 m x 2.1 m, weight approx. 740 kg.

Condition: used, 2-spindle paper drilling machine Gijdpfx Aiowv S S De Neu

Condition: used, Year of construction: 1991, - Drilling diameter: 3–10 mm (optionally up to 22 mm) - Drilling depth: Max. 70 mm - Spindle distance: Adjustable from 45 mm to 540 mm Gedpfewv D Haex Ai Nsiu - Hole spacing: Min. 3 mm, Max. 800 mm - Table size: 98 x 60 cm - Additional features: Drill length compensation, cooling/lubrication, speed control

Condition: used, 220 V AC 50 / 60 Hertz 800 W 8 A Gisdpfx Aewv D E Nei Nju Pile height: 50 mm Speed: 18 seconds

Condition: ready for operation (used), Column drill press GILLARDON GB 25 -Drilling capacity / steel 32 mm -Drilling capacity / cast iron 35 mm -Speed range - stepless 60 - 1800 rpm -Direction of rotation / right - left -Morse taper MK 3 -Overhang 290 mm -Quill travel 175 mm -Table area 450x360 mm -Table height adjustment by means of hand crank -Threading device Giodpfx Aijzdb H Se Nou -Coolant system -Drill chuck -Analog speed display -Foot switch -Emergency stop -Documentation Dimensions: L x W x H 0.7 x 0.7 x 2 meters / Weight: 490 kg Errors and omissions excepted.

Condition: good (used), - MK3 - Variomat (continuously variable speed control) - Table dimensions: 670 × 290 mm - Digital display on the X-axis - Cooling system Gsdpfx Aeza Surji Nsiu - Lighting - 380V

Condition: used, The KNUTH KSR 50 VT is a high-performance radial drilling machine that belongs to the Radial Drilling Machines category. Designed with "Tool to the workpiece" in mind, this machine offers exceptional flexibility with clamping surfaces on three sides to accommodate various applications. Built from thick-walled high-grade cast iron, the KSR 50 VT features a robust structure, ensuring durability and precision during operation. The electronically controlled servo quill feed and large touchscreen display enhance user experience, allowing for seamless adjustments of machining parameters. Ideal for single and small series production, it shines in maintenance activities and tool as well as steel construction. With a drilling capacity of 50 mm and a table setup area of 1,200 x 505 mm, the KSR 50 VT is versatile enough for diverse tasks. Buy now to elevate your drilling capabilities with this advanced radial drilling machine. Gsdpoyfl Uvefx Ai Nsiu

Condition: new, Year of construction: 2026, - Stepless speed control - Quickly adjustable depth stop - Thread cutting device - Undervoltage release - Table height adjustment via rack and pinion - LED lighting in the head - Continuous/normal drilling capacity 20/23 mm - Thread cutting capacity max. M 12x1 - Spindle MK II - Drilling depth 100 mm - Arm overhang 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): Number 2, spacing 125 mm - Speed display Digital - Drilling depth display Digital - Quickly adjustable depth stop - Manual feed - Motor, three-phase, 400 V - Spindle speeds, stepless, 30 - 3,000 rpm Optional drilling kit 3 consisting of: - Machine vise [felix] 2.0 100 mm - Quick-change drill chuck 3-16 mm (accuracy 0.17 mm), - Taper shank MK 2 B18 and reducing sleeve MK 2 to MK 1 € 485.00 Optional: Coolant system: € 620.00 FACTORY WARRANTY: 3 years DELIVERY: Free delivery including packaging NOT THE RIGHT MACHINE? Gisdpfx Aod Nk S Isi Neu WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Cutting device Programmable boring depth shut-off Boring depth and speed display - digital Threading device M20 (dependent on pitch) Infinitely variable speed from 125 - 4000 RPM in two stages, stage change via belt deflection. Godpfxsd H Rgfo Ai Noiu Boring capacity 25/30 mm Spindle MK 3 Boring depth 125 mm Overhang 280 mm Usable table surface (swiveling) 420 x 340 mm Feed rate 0-300 mm/min, infinitely variable Table height adjustment with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor - three-phase 400 V, pole-reversible 0.9/1.45 kW Weight 300 kg OPTION: - Drilling package 5 consisting of: taper mandrel, drill chuck, vise, and T-slot set (€845) - Spindle stop and chip breaker module (€864) DELIVERY: free to your door, including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Giedpoyxy S Rjfx Ai Nsu Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Condition: new, Year of construction: 2026, Drilling depth and speed display – digital Thread cutting capacity M20 (depending on pitch) Stepless speed control from 125 - 4000 RPM in two stages, stage change via belt adjustment. Drilling capacity 25/30 mm Thread cutting capacity (depending on pitch) M20 Spindle MK 3 Drilling depth 125 mm Overhang 280 mm Usable table surface (swiveling) 420 x 340 mm Manual feed Table height adjustment with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor – three-phase 400 V, pole-changing, 0.9/1.45 kW Weight 275 kg OPTION 1 - € 625.00 Drilling package 4 consisting of: - Vise [felix] 2.0 - 120 mm, clamping width 0-168 mm - Quick-change drill chuck, mount B18, 3-16 mm (accuracy 0.17 mm) Taper shank MK 3 B18 and reducing sleeve MK3 to MK 2, as well as MK 3 to MK 1 OPTION 2 - € 1,245.00 Thread cutting attachment, max. M20, adjustment of thread cutting depth via digital depth display Giedpfx Aied H Rffe Nsu Delivery: FREE DELIVERY, including packaging Factory warranty: 3 years NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Standard Equipment - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via rotary knob - Thermal overload protection - Spindle stop - Drill protection with electrical protection - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drilling cross with push button - In thread cutting mode: Right/Left TECHNICAL DATA Continuous/Normal drilling capacity (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Maximum thread cutting capacity: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Overhang: 300 mm Column diameter: 125 mm Usable table area (W x D): 590 x 450 mm Speed display digital Drilling depth display digital Drill depth stop with fine adjustment Table height adjustment with rack and pinion Gsdpjfmh Tlofx Ai Neiu Spindle/Table: 150-700 mm Spindle speeds stepless: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with gearbox) 0-4,000 rpm Optionally R1 or R2 without extra charge Extra charge for R3: € 1,700 Accessories: Coolant system (€ 620) - Separate container - Filling volume: max. 15 l - Delivery rate max. 13.4 l/min Accessories: Drilling package 5 (€ 875) - Vise [felix] 2.0 150 - Taper shank MK III/B18 - Reduction sleeve MK III/MK I - Reduction sleeve MK III/MK II - Quick-change drill chuck B18 3-16 mm (Accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: free to your doorstep incl. packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Continuous/normal drilling capacity 15/18 mm (in E335/St60) 17 Nm Threading capacity M12 (depending on pitch) Spindle: MK II Godjxgdn Aopfx Ai Njiu Drilling depth: 70 mm Overhang: 220 mm Distance spindle/work surface: max 750 mm Column diameter: 70 mm Usable work surface W x L: 300 x 250 mm T-slot size (arm), spacing (mm), width (mm) Number: 2, 125, 14/26 Speed display: Digital Drilling depth display: Digital Drilling depth stop: quickly adjustable stop ring Drilling feed: manual Table height adjustment: hand crank/rack and pinion Motor: three-phase 230V with frequency inverter: 0.75 kW Spindle speed: 40-4,000 rpm Machine dimensions: 420 x 540 x 1,780 mm Weight: 88 kg Accessories (optional) Drilling kit 2 consisting of: - Machine vise [felix] 2.0 80 mm - Quick-change drill chuck B16 1-13 mm (accuracy 0.17 mm), - Tapered shank MK 2 B16 and reducing sleeve MK 2 to MK 1 €315.00 Factory warranty: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!