Used Hardware Drilling Machine for sale (91,633)

Condition: excellent (used), Fitting drilling machine Blue Max mini Max operating pressure 6 bar/100 PSI Hettich system Pneumatic material clamp Dodpfx Ahjizwwqsuekw Pneumatic drill feed with linear stop

Condition: used, Support table: 300 x 37 cm Engine: 1.6 kW engine: 1,6 kW MAW BEV electric pneumatic cup band drilling machine for drilling cup bands or fittings. Dkjdpfxelfcnts Ahuew

Condition: used, used, great condition, little usedMake HettichType Blue Max mini PMPneumatic drill feedStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Dkedpfxjvwf Dqs Ahusw

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 419.324.012, drilling depth: 1,200 mm, spindle speed (max.): 3,000 rpm, table length: 1,050 mm, table width: 1,050 mm, center height: 1,040 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Drilling depth: 1,200 mm Spindle speed (min): 50 rpm Spindle speed (max): 3,000 rpm Feed rate (Row 1): 18 – 160 mm/min Feed rate (Row 2): 35 – 320 mm/min Rapid traverse speed: 3.5 m/min Dkjdpoxm S Idsfx Ahujw Rated motor speed: 1,400 rpm Table length: 1,050 mm Table width: 1,050 mm Centre height above table: 240 – 1,040 mm MACHINE DETAILS Dimensions (L x W x H): 6,500 x 3,500 x 2,900 mm Electrical data Operating voltage: 380 V Frequency: 50 Hz Connected load: 25 kW EQUIPMENT 3-axis Heidenhain digital readout Coolant system

Condition: excellent (used), Year of construction: 2003, Model: G50 x 1600 Year: 2003 Radius of Arm: 1600mm Dodsxphw Topfx Ahuskw Spindle Taper: MT5 Spindle Speeds: 25 – 2000 RPM Max. drilling capacity: 75mm iron / 50mm steel

Condition: used, total height: 2,500 mm, total width: 1,000 mm, total length: 2,400 mm, Empty weight: 3.000 kg Dedpexhcf Nefx Ahuokw - Documentation available: No - Control: Conventional - Drilling depth: 580mm - Spindle speed max.: 2120rpm - Table width: 550mm - Table length: 750mm - Drilling capacity: 55mm - Spindle diameter: 70mm - Max. reach: 1200mm - Spindle speed min.: 47rpm - Transport dimensions: 2400mm x 1000mm x 2500mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1998, throat max. 2000 mm throat min. 405 mm bore capacity in steel (diameter) 65 mm bore capacity in cast iron 80 mm Dedpfx Ahoxukpvjuokw spindle taper MT 5 drilling depth in one stroke 475 mm vertical adjustment of arm 875 mm base plate surface area 2455 x 1100 mm spindle turning speed range 19 - 1320 U/min feeds 0,07 - 2,9 mm/U total power requirement 10 kW weight of the machine ca. 7 t

Condition: new, Year of construction: 2025, Continuous/normal drilling capacity 25/30 mm Thread cutting capacity max. M20 Spindle MK III Drilling depth 125 mm Thrust 260 mm Column diameter 110 mm Usable table surface [WxL] 420x340 mm Speed display scale Drilling depth display scale Drilling depth stop with fine adjustment Table height adjustment with rack Motor three-phase 400 V pole-changing 0.90/1.45 kW Dkedpfxedvhdis Ahujw Spindle speed with gear, infinitely variable 125-4000 1/min in 2 stages I: 125-2000 1/min II: 250-4000 1/min The stage change is carried out by changing the belt OPTION 1 - € 610.00 Drilling package 4 consisting of: - Vice [felix] 2.0 - 120 mm, clamping range 0-168 mm - Keyless drill chuck, B18 mount, 3-16 mm (accuracy 0.17 mm) Taper mandrel MK 3 B18 and reducing sleeve Mk3 to Mk 2, as well as MK 3 to Mk 1 Delivery: free of charge including packaging FACTORY WARRANTY: 3 years NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: ready for operation (used), Year of construction: 1986, arm 1250 mm, drilling capacity 55 mm, hydraulic locking Dsdpfxsxdht Do Ahuekw

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 15105602, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 9,200 rpm, number of slots in tool magazine: 32, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine within the specified timeframe between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 315 mm Travel Z-axis: 180 mm Travel W-axis: 495 mm Feed rate X-axis: 9 m/min Feed rate Y-axis: 9 m/min Feed rate Z-axis: 4 m/min Spindle speed (max.): 9,200 rpm Spindle speed (min.): 50 rpm Tool holder diameter: 30 mm Number of magazine tool slots: 32 Max. tool length: 260 mm Max. tool diameter without empty adjacent slots: 63 mm Table width: 410 mm Table length: 1,230 mm Table load capacity: 250 kg CNC control manufacturer: HEIDENHAIN MACHINE DETAILS Dimensions (L x W x H): 3,500 x 2,400 x 2,200 mm Distance floor to coordinate table: 1,010 mm Distance coordinate table to spindle nose: 125 to 620 mm Dodoxm S R Espfx Ahuekw Horizontal reach: 370 mm EQUIPMENT Documentation/manual Infinitely variable spindle speed FEHLMANN dividing unit (4th axis) 126 SK 30 tool holders Supplementary documentation

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 40 mm throat 297 mm bore stroke 120 mm speeds 8 / 75 - 1600 U/min table-size 500 x 460 mm Dksdpoxuv I Rofx Ahusw spindle taper MK 4 column diameter 115 mm spindle feeds: 3 / 0,1 - 0,26 mm/U distance spindle /table 715 mm distance spindle/base plate 1180 mm engine output 1,5 kW table rotating 360 Grad weight of the machine ca. 335 kg dimensions of the machine ca. 0,5 x 0,76 x 1,89 m Unused exhibition machine at a special price: Heavy geared boring machine with digital display for speed and drilling depth, hardened gears, thick-walled column, large table and base plate with T-slots, motorized table adjustment, electromagnetic feed engagement by means of snaps on the control lever. The machine has minor transport damage, see picture no. 6. This is a exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m².

Condition: used, total width: 600 mm, total length: 700 mm, total height: 700 mm, - Documentation available: No - Main motor power [kW]: 0.75 - Drills included: Yes - Tool wrenches included: Yes - Voltage [V]: 400 - Power [kW]: 0.8 - Transport dimensions: 700mm x 600mm x 700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Dksdpfxow N Nq As Ahuew VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 125 mm spindle taper MT 3 total power requirement 1,8 kW weight of the machine ca. 250 kg dimensions of the machine ca. 1500x1000x1900 mm Dsdsxtfzkopfx Ahuekw Features: -Stepless drive -Drilling depth stop -Extra-long drill spindle

Condition: used, Year of construction: 1983, functionality: fully functional, ACIERA - 22 S 2-1 E Listing Details Stock number: 1039-9393 Machine type: Column drilling machine Manufacturer: ACIERA Model: 22 S 2-1 E Year of manufacture: 1983 Control system: — Location: D-59302 Oelde Country of origin: Switzerland Delivery time: by arrangement Freight terms: ex location Additional information: Column Drilling Machine ACIERA - 22 S 2-1 E - Only 523 operating hours WE OFFER YOU: - Workshop-tested machines - Free loading onto truck - NO auction fee - Delivery possible (at extra cost) - Unloading and commissioning (at extra cost) Technical Details Dodpfx Aext N Tqehuekw Speed range: 40 - 3,600 rpm Drilling stroke: 105 mm Spindle taper: MK Arm reach: 250 mm Gear stages: 2x Table clamping surface: 660 x 320 mm T-slots: 3x T-slot pitch: 100 mm T-slot width: 18 mm Total power requirement: 2 kVA Machine weight approx.: 720 kg Required space approx.: 1.2 x 1.0 x 1.8 m

Condition: good (used), Year of construction: 1994, spindle drilling machine 1994 (engine new 2015) machine no.: PB04.08.94.261 4 drill heads, can be upgraded to 6 drill diameter: 3mm to 14mm hole spacing: 31.7mm to 293mm hole spacing using the sliding table: 1mm to 420mm located: Germany Insertion depth behind the drills: 25 mm sliding table width: 450 mm Sliding table size in front of the drills 300 mm maximum stacking height: 50 mm power requirements: 230/400 volts 3 phases, 50 Hz, 1.87 kWh. space requirement: 770mm (W) x 760mm (D) x 1350mm (H) weight: 275 kg net located: Germany available: immediately Dsdpfxovccnke Ahuokw

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 35114, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, feed length Z-axis: 600 mm, spindle speed (max.): 4,000 rpm, drill diameter: 16 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Feed travel X-axis: 600 mm Feed travel Y-axis: 300 mm Dkedpfexm S Hysx Ahujw Feed travel Z-axis: 600 mm Feed travel W-axis: 650 mm Spindle speed (max.): 4,000 rpm Drilling diameter, twist drill: max. 16 mm Single-lip drill: 4 to 16 mm Tapping: max. M12 Table length: 1,000 mm Table width: 680 mm MACHINE DETAILS Control model: HEIDENHAIN TNC 124 DIMENSIONS & WEIGHT Dimensions (L x W x H): 3,500 x 1,500 x 2,100 mm Total weight: 2,000 kg

Condition: good (used), Year of construction: 2016, X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Dodpfjw Tc Hfjx Ahuokw Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: used, Year of construction: 1986, - Year: 1986 - Documentation available: No - Serial number: 2181 Dodjwnh Rtjpfx Ahuokw - Control: Conventional - Motor power: 4.0kW - Drilling depth: 130mm - Spindle speed max.: 2500rpm - Digital readout: No - Tool holder: 45 - Table width: 750mm - Table length: 1020mm - Drilling capacity: 2mm - Travel X: 1600mm - Spindle diameter: 75mm - Travel Z: 900mm - Max. reach: 1600mm - Number of axes: 2 - Spindle speed min.: 28rpm Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Price: On request - Documentation available: No - Control: Conventional Dkjdpfjwfpbbox Ahuew - Drilling depth: 150mm - Model: ördinatenboor - Digital readout: Yes - Table width: 1500mm - Table length: 2200mm - Travel X: 2500mm - Travel Y: 1400mm - Spindle diameter: 100mm - Travel Z: 1000mm - Number of axes: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,500 mm, total width: 1,000 mm, total length: 2,200 mm, Empty weight: 2.500 kg - Documentation available: No - Control: Conventional - Motor power: 6.0kW - Drilling depth: 150mm - Spindle speed max.: 2650rpm - Model: iaalboormachine - Table width: 600mm - Table length: 1300mm - Drilling capacity: 32mm - Travel Y: 1000mm - Spindle diameter: 40mm - Travel Z: 600mm - Max. reach: 1000mm - Spindle speed min.: 30rpm - Transport dimensions: 2200mm x 1000mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg Dsdpfxownilxe Ahujkw Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,800 mm, total height: 2,300 mm, total width: 1,800 mm, Empty weight: 1.350 kg - Documentation available: No - CE marking present: Yes - Motor power: 2.0kW - Drilling depth: 150mm - Spindle speed max.: 3525rpm - Digital readout: Yes - Tool holder: SK40 - Table width: 260mm - Table length: 1245mm - Travel X: 745mm - Travel Y: 406mm - Spindle diameter: 100mm - Travel Z: 305mm - Type digital: ACURITE III - Spindle speed min.: 60rpm - Transport dimensions: 1800mm x 1800mm x 2300mm (l x w x h) - Transport weight [kg]: 1350kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Dodpfx Ahjwnibgsuekw VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,600 mm, total length: 1,250 mm, total width: 800 mm, Empty weight: 150 kg Tapping machine, drilling and tapping - Documentation available: No - Serial number: 132832 - Motor power: 0.6kW - Spindle speed max.: 1600rpm - Model: omboormachine - Table width: 225mm - Table length: 290mm - Spindle speed min.: 320rpm - Transport dimensions: 1250mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 150kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Dkedpswywwysfx Ahuow

Condition: used, total height: 2,700 mm, total width: 1,000 mm, total length: 2,400 mm, Empty weight: 2.500 kg - Documentation available: No - Control: Conventional - Motor power: 7.0kW - Drilling depth: 130mm - Spindle speed max.: 2500rpm - Model: iaalboormachine - Tool holder: MK4 - Table width: 750mm - Table length: 1400mm - Drilling capacity: 50mm - Travel X: 950mm - Travel Y: 900mm Dsdpownnblsfx Ahuskw - Spindle diameter: 70mm - Max. reach: 950mm - Spindle speed min.: 28rpm - Transport dimensions: 2400mm x 1000mm x 2700mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2001, With positioning table Heidenhain controller - Year: 2001 - Documentation available: Yes - CE marking present: Yes - Serial number: 856 - Control: CNC - Motor power: 3.0kW - Spindle speed max.: 3000rpm - Model: omboormachine - Digital readout: Yes - Tool holder: SK30 - Table width: 310mm - Table length: 980mm - Drilling capacity: 32mm - Travel X: 450mm - Travel Y: 900mm - Spindle diameter: 30mm - Travel Z: 300mm - Max. reach: 322mm - Type digital: Ingebouwd - Number of axes: 3 - Spindle speed min.: 1rpm Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dksdpfx Aowh Smlshusw Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Empty weight: 4.200 kg - Documentation available: Yes - Control: Conventional - Motor power: 2.0kW - Drilling depth: 300mm - Spindle speed max.: 2800rpm - Digital readout: Yes - Tool holder: MK4 - Table width: 700mm - Table length: 1200mm - Travel X: 1200mm - Travel Y: 800mm - Travel Z: 715mm - Max. reach: 1300mm - Type digital: Phillips - Spindle speed min.: 45rpm - Transport weight [kg]: 4200kg Financial information Dkodpfx Ajwnifrohuew VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum