Used Drilling Machine Drill Press for sale (67,781)

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, input voltage: 230 V, input current: 15 A, input frequency: 50 Hz, Equipment: documentation/manual, Used Secabo TS7 Transfer Press Manufacturer: Secabo Nlodpfx Ajy Nztdomneb Model: TS7 Voltage: 230-250V (50Hz) Includes manual and extra parts

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Nodpfx Ajmck Rysmnelb Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Njdpfx Amexpqy Dsnelb Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, GÜHRING Drill Bit Grinding Machine Type SS 15 Spiral Drill Bit Grinding Machine Serial No. 909 Year of manufacture: approx. 1977 Maximum drill diameter: 40 mm Grinding wheel diameter right: 300 mm Grinding wheel diameter left: 250 mm Grinding wheel width: 40 mm Grinding spindle speed: approx. 2800 rpm Motor power: approx. 2.2 kW Electrical connection: 380 Volt, 50 Hz - Point angle steplessly adjustable - Point thinning device - Gear motor for vertical oscillation in front of cup wheel - Diamond dresser holder - Various drill holders - Coolant system Required space (L x W x H): 1200 x 950 x 1550 mm Nedpsdzp Tbjfx Amnelb Weight: approx. 1150 kg

Condition: repair required (used), bore capacity in steel diameter / mm arm length 1000 mm workpiece height max / mm - throat (max) 1000 mm - sleeve stroke 250 mm MILLING SPINDLE / HEAD / - spindle revolutions (min) 47.5 /min Nljdpfx Aevmtlhemnsb - spindle revolutions (max) 2120 /min - spindle diameter 60 mm - space requirements -left/right- 2000 mm - space requirements -front/back- 750 mm - total height 2160 mm - total weight approx. 2500 kg Machine is not 100% OK, and needs an overhaul. - Height adjustment and cross adjustment must be repaired

Condition: new, Year of construction: 2025, functionality: fully functional, power: 16 kW (21.75 HP), input voltage: 380 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, workpiece length (max.): 60 mm, number of axes: 3, controller manufacturer: ISAC, actuation type: electric, overall weight: 2,750 kg, Equipment: CE marking, documentation/manual, GO! 1300M CNC DRILLING MACHINE OPD201001 HSD Spindle Motor 5,5 kW - ER32(Manual) OPD201100 HSD Boring Unit - 17 Tools Capacity OPA0032 AES Wop CAD/CAM Program OPA0710 HSK F63 ER32 Tool Holder OPD201900 Go! Seaway Packaging System OPD201831 GO! HMI - English Interface Nedpfx Asy Nyypjmnjlb

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm Njdpfoy Ukyqox Amnjlb y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Nledpfsy Ukw Nox Amnob Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: good (used), Year of construction: 1999, Drilling capacity in steel (diameter): 60 mm / MK5 Quill stroke: 310 mm Spindle speed: 28...2500 rpm Table size: 1470 x 986 mm Total power requirement: 4 kW Nodpfey Ukwvjx Amnolb Machine weight approx.: 4.6 t

Year of construction: 1991, condition: ready for operation (used), A single-sided glass drilling system is offered. Table surface X/Y: approx. 800mm/600mm, drilling diameter: approx. 3mm-100mm, table design: grating support for water drainage, control: manual drilling feed. Equipped with sturdy steel base frame, water collection tray. Weight: approx. 180kg, overall dimensions X/Y/Z: approx. 1000mm/1100mm/1650mm. Inspection possible by arrangement. Nodpfey Tn Iiex Amnelb

Year of construction: 2018, condition: ready for operation (used), A vertical glass drilling system is offered. Working range X/Y: unlimited/1300mm, drilling diameter: 3mm-100mm, glass thickness: 3mm-25mm, control: digital position display with manual drilling control. Equipped with rollers on both sides, water collection tray, pneumatic workpiece clamping, drill set. Weight: approx. 1100kg, overall dimensions X/Y/Z: approx. 5000mm/2500mm/1200mm. Inspection possible by arrangement. Njdpfx Amoy Tn Hxsnjlb

Year of construction: 2018, condition: ready for operation (used), A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement. Nledpfx Amsy Tn Ntsnjb

Condition: excellent (used), Year of construction: 2018, You are bidding on: a branded press brake from the well-known top manufacturer Schröder. Features of the machine: Schröder press brake Bends sheet metal up to 1 mm of steel, aluminum, etc. - 1.5 mm Bending length slightly over 2 m Degree indicator Foot closure Current new price in this configuration: €16,600 gross Pneumatic assistance (it can, of course, also be used without it - the pneumatic assistance can be used with finger pressure, see picture, on the control handle for almost self-sufficient bending, which protects your back a lot!!!!) Optionally, I can also offer you an additional front gauge and radius gauge (round gauge) as well as a slitting shear and depth stop with finger operation here, if desired, along with a compressor... Matching sheet metal shear 2 m or mechanical and electric guillotine shear 1 m are also available - a set price is possible and can be arranged here if desired. The machine is of the usual quality - it has not been used for the last 2 years due to business closure. Optionally, you can find and buy many machines and machine accessories, such as various gauges, depth stops - everything related to sheet metal and steel processing, such as press brakes, sheet metal shears, drilling machines, rounding machines, slitting and profiling machines - accessories (beading device, round rollers for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers in the shop. I am always available to answer your questions. You will receive an invoice with VAT shown. Free loading is possible - machine weight approx. 1050 kg. Inspection and testing are possible after making an appointment by phone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer himself (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Nljdpfx Asyx S H Tomnjb Location: 97261 Güntersleben Article number: Schröder 2m press brake.

Condition: new, Drill grinding machine Make: MOTOM Model: BSM 13 DUO Grinding range 2-13 mm Paintwork gray Nljdpfxoguadns Amnsb Areas of application: Grinding cone shell Sharpening relief grinding Scope of delivery: CBN grinding wheel for HSS tools Pliers set from 2-13 mm increasing by 1.0 Plexiglas protective shield

Condition: new, Column Drilling Machine Brand: MAXION Model: UNIMAX 3 AVG Condition: New machine Spindle speed (stepless): Range A: 80 - 1,440 rpm Range B: 180 - 3,200 rpm Max. drilling capacity: 30 mm Standard features: - Stepless feed control - Stepless speed control - Digital display for speed, feed, and drilling depth - Automatic tool ejector - Operating manual Nlodpfxobrfmks Amneb With the following options: - Tapping device

Condition: new, Stylus grinding machine Make: OPTigrind Model: GH 20 T Art.Nr.: 3100125 Condition: new machine Speed: 5.000 rpm Clamping range: 1-12 mm equipped as standard with: -Collets 385E, size 4 / 6 / 8 / 10 / 12 mm -Corundum pot wheel -Diamond Cup wheel Nlodpfxsc I Tzvs Amneb -Device for the Regrinding of chisel -Device for the sharpening of cutters -Apparatus for the grinding of twist drills -Manual

Condition: new, Drill Grinding Machine Make: MOTOM Nljdpfx Aob Ecp Ajmnsb Model: BSM 22 grinding range 8-22 mm (with options up to 25 mm) incl. CBN 200 grinding wheel for HSS tools incl. set of pliers from 8-22 mm increasing by 1,0 mm

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 3 TAP Condition new machine Spindle speed (continuous): Area A-80 - 1,440 RPM. Area B 180-3,200 RPM. Njdpfjd Hrhvox Amnelb Standard ALB ear performance: 30 mm equipped as standard with: -infinitely variable speed control -Digital display for speed -Digital display for drilling depth -Thread cutting device -Light machine -automatic tool ejector -Manual

Condition: new, Drill Grinding Machine Make: MOTOM Nsdpfx As Sgi Rjmnslb Model: BSM 13 grinding range 2-13 mm incl. CBN 200 grinding wheel for HSS tools incl. set of pliers from 2-13 mm increasing by 1,0

Condition: used, bore capacity in steel (diameter) 32 mm throat 325 mm bore stroke 170 mm taper MK 4 MK table-size 570 x 480 mm feeds 0,1 - 0,16 - 0,25 mm/U turning speeds 60 - 1600 U/min Nlodpfxsy N D I Dj Amnjb total power requirement 2,9 KW weight of the machine ca. 0,65 t dimensions 1,2 x 0,8 x 2,15 m Pillar drilling machine with: - Feed - Variable spindle speed - Coolant pump - Machine light

Condition: used, Year of construction: 2005, bore capacity in steel (diameter) 30 mm throat 275 mm bore stroke 100 mm taper MK 4 MK table-size 420 x 340 mm feeds nein mm/U turning speeds 80 - 2000 U/min total power requirement 0,9 / 1,45 KW Nledpfx Amey N D Iqsnjb weight of the machine ca. 0,22 t dimensions 0,85 x 0.6 x 1,9 m Pillar drill with: - Variable spindle speed - Digital speed display - Digital depth display - Forward/reverse rotation

Condition: used, bore capacity in steel (diameter) 32 mm throat 325 mm bore stroke 170 mm taper MK 4 MK table-size 570 x 480 mm feeds 0,1 - 0,16 - 0,25 mm/U turning speeds 60 - 1600 U/min total power requirement 2,9 KW weight of the machine ca. 0,65 t dimensions 1,2 x 0,8 x 2,15 m Pillar drilling machine with: - Feed Njdoy N D Ikjpfx Amnelb - Variable spindle speed - Coolant pump - Machine light

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 140 mm taper MK 3 MK table-size 380 x 360 mm feeds über Handrad Nedpfjy N D Hyox Amnolb turning speeds 85 - 1100 U/min total power requirement 1,3 KW weight of the machine ca. 0,27 t dimensions 0,95 x 0,6 x 1,92 m Pillar drill with: - Feed via handwheel - Spindle speeds via belt drive

Condition: ready for operation (used), A gang drilling machine is offered. Number of spindles: 3, drilling capacity: 8mm, spindle holder: B12/MK1, table clamping surface X/Y: approx. 1050mm/300mm, speed range: 450rpm - 4500rpm, control system: manual. Equipped with quick-action drill chucks, solid cast iron base, emergency stop switch. Weight: approx. 480kg, overall dimensions X/Y/Z: approx. 1200mm/850mm/1700mm. Inspection possible by arrangement. Nedjy Tau Uopfx Amnjlb

Condition: ready for operation (used), A column drilling machine is offered. Drilling capacity: 40mm, spindle holder: MK4, table clamping surface X/Y: approx. 550mm/450mm, speed range: 25rpm - 3000rpm, control system: manual. Equipped with machine vise, height-adjustable drilling table, coolant system. Weight: approx. 850kg, overall dimensions X/Y/Z: approx. 1000mm/700mm/2100mm. Inspection possible by arrangement. Nljdpfx Amsy Tavfenjb