Used Doosan Dx300Lc for sale (294)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 300 mm, turning length: 510 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, torque: 127 Nm, bar passage: 50 mm, chuck outer diameter: 152 mm, Equipment: documentation/manual, rotational speed infinitely variable, Machine used in custom and small-batch production, operating in a single shift. Excellent condition, producing parts with an accuracy of 0.01mm since its initial use. C-axis, driven tool positions in the turret, BMT connection. Programmable steady rest. Equipped with a chip conveyor and oil mist extractor. Comes with original documentation. Hsdpjzcmmnofx Ap Denn High-rigidity roller linear guides: The robust roller guides used on the X and Z axes minimize vibration and dramatically reduce machining time. The price includes the 1.5m bar feeder shown in the picture; it can also be purchased separately if required.

Condition: excellent (used), Year of construction: 2020, Swing over bed 880mm, Swing over saddle 817 mm, Maximum turning diameter 550mm, maximum turning length 3070mm, bar capacity 116.5mm, Y axis +/- 75mm, Spindle speed 2000rpm, milling speed 4,000rpm, spindle power 37/30KW, 12 station turret, Fanuc IPlus control. Hodjx I N Rbopfx Ap Denn 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: good (used), Year of construction: 2008, Table size 1600 x 750 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 24m/min, Spindle power 18.5 Kw, spindle speed 6,000rpm, 40 station ATC, spindle taper BT50, Hnsdpoxwytcofx Ap Dsn through spindle coolant, swarf conveyor, Fanuc 21i control.

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle speed 12,000rpm, BT40 spindle taper, Spindle Motor 17kW, FANUC Oi Control, Hjdsx Dk Dlspfx Ap Donn 30 Station ATC, Low Volt light, Through Spindle Coolant

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, Hjdpswwtrbjfx Ap Donn 992 mm maximum turning length, 1000rpm spindle, Spindle bore 275mm, 10 station turret 45kW spindle motor, FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Hnsdpfx Apoxm Sxvo Don Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: excellent (used), Year of construction: 2008, DOOSAN MX2000ST 9 AXIS MILL TURN CENTER Sub spindle and bottom Turret Hsdpfx Ajydigmjp Denn Both spindles have 200mm power chucks on at the moment but we also have a Heinbuck collet chuck available good package of tooling Shown working on our motorsport jobs all done in one! Can be demonstrated if required.

Condition: used, Year of construction: 2018, x-travel 1300 mm y-travel 670 mm Hjdpoy Aphcefx Ap Dsnn z-travel 625 mm control Siemens Sinumerik 828D weight of the machine ca. 8500 kg

Condition: repair required (used), functionality: limited functionality, first registration: 01/2018, Year of construction: 2018, machine/vehicle number: DW6CWLBRAG1010165, We are offering this Doosan machine, model DL200, a wheel loader, manufactured in 2018. The machine has an electronic fault: it starts, but due to the electronic error, it cannot move. Hnodpoy S S Epefx Ap Djn Manufacturer: Doosan Model: DL200 Year of manufacture: 2018 If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Year of construction: 2007, operating hours: 8,957 h, Equipment: all wheel drive, * Enclosed cab * Air conditioning * Radio * Central lubrication system * Work lights * Loading bucket * Load disconnect ----Subject to errors and prior sale Hedjy Daf Iopfx Ap Denn ----Vehicle number: 11891

Condition: used, Year of construction: 2019, x-travel 1300 mm Hnsdpfxoyzt Ane Ap Den y-travel 670 mm z-travel 625 mm control Siemens Sinumerik 828D weight of the machine ca. 8500 kg

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller manufacturer: FANUC, controller model: Series 21i-MB, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis DOOSAN ACE HC-500 was manufactured in 2005. It features an X-axis travel of 850 mm, Y-axis travel of 700 mm, and Z-axis travel of 750 mm. The machine includes a robust pallet size of 500 x 500 mm with a maximum pallet load of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN ACE HC-500 horizontal machining centre we have for sale. Contact us for further details. • Distance spindle face to pallet center: 150–900 mm • Distance spindle center to pallet surface: 50–750 mm • Pallet size: 500 x 500 mm Hsdpfeyxppljx Ap Dsnn • Max. pallet load: 500 kg • Spindle orientation built-in sensor • Through-spindle coolant: 70 kg/cm², max flow 20 L/min, pump power 3.7 kW • Spindle completely overhauled in 2023 • Z-axis ball screw replaced in 2020 Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,193 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, spindle motor power: 15,000 W, controller manufacturer: FANUC, controller model: F0i, number of axes: 2, Horizontal turning machine manufactured in 2018. This DOOSAN Lynx 2100A features a maximum turning diameter of 350 mm and a turning length of 330 mm. It is equipped with a spindle speed of 5,000 rpm and a chuck size of 8” (210 mm). If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 2100A machine we have for sale. Contact us for further details regarding this machine. • Control: Fanuc F0i Hedpfx Apjyxhqzo Djnn • Operating hours: 6,193 h • Spindle: 8" chuck (210 mm); bar capacity Ø52 mm • Capacity: Max turning diameter Ø350 mm; max turning length 330 mm • Axes: rapid traverse X/Z 30 m/min • Turret: 12 stations; tool change time 0.15 s; tool shank 25 x 25 mm; boring bar Ø32 mm • Tailstock: Programmable with rotating tip • Certification: CE • Software/monitoring: Doosan tool load monitoring system Additional equipment • Basic tool holder set • Oil mist extractor • Transformer • Bar feeder preparation • Workpiece catch with collection box • Automatic tool gauge • High-pressure cooling 7 bar (1.1 kW) • Oil separator • Chip collector • Electrical noise suppression Technical Specification Counter Spindle No Driven Tools No

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 7,710 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,340 mm, power: 43 kW (58.46 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for use and fully operational Technical condition: Good Front tire type: Solid rubber Hnodpfx Apey N H Ero Dsn Front tire condition: 80 – 100% Rear tire type: Solid rubber Rear tire condition: 80 – 100% Description: Diesel forklift DOOSAN D30G – 3,000 kg lifting capacity – Year of manufacture: 2008 – Sideshift – TRIPLEX free lift mast – Overall height: 2.2 m – Lifting height: 4.7 m – 7,710 operating hours according to meter – 4-cylinder YANMAR diesel engine with 58 HP – Solid rubber tires approx. 80% – Semi-cab, lighting system – Simple, mechanical forklift – Good condition – PRICE: 11,000 EUR excluding VAT Sideshift Third valve, rear working lights, front working lights, semi-cab, heating, full cab.

Condition: used, power: 81 kW (110.13 HP), Year of construction: 2015, operating hours: 6,035 h, Empty weight: 1 kg Hjdpfxoy Ey D Ho Ap Dsnn Please contact Emal Jaweed for more information

Condition: good (used), Year of construction: 2010, operating hours: 115,503 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, torque: 100 Nm, controller manufacturer: Fanuc, workpiece width (max.): 670 mm, workpiece weight (max.): 1,000 kg, total height: 2,940 mm, total width: 2,750 mm, table width: 670 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 8 bar, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 420 V, type of input current: three-phase, Equipment: documentation/manual, BT 40. No chip conveyor. Hnedpfx Apjyx U Nwj Don

Condition: used, machine/vehicle number: FBA11-2390-00377, Year of construction: 2015, operating hours: 7,513 h, lifting height: 4,750 mm, fuel type: electric, mast type: triplex, gearing type: automatic, battery voltage: 48 V, fork length: 120 mm, color: orange, 2015 Doosan Forklift Type B18T-7 48 volt E0583 2015 Fork positioner Lifting capacity: 1,800 kg Fork length: 1.20 m Triplex mast Including charger Test valid until 10/26 = Further Information = Year of manufacture: 2015 Unladen weight: 3,356 kg Lifting capacity: 1,800 kg CE marking: yes Overall condition: average Hedpfxjyxg Dms Ap Djnn Technical condition: good Visual condition: average

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control; Thermal sensors for highest precision; Y-axis; Sub-spindle with collet chuck; Spindle bore 80 mm (main spindle); All axes are flat guideways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders. Hsdpfx Apey Amfle Donn

Condition: good (used), Year of construction: 2016, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg Hnodjwtg Inopfx Ap Dsn

Condition: good (used), Year of construction: 2016, spindle speed (max.): 3,500 rpm, overall weight: 6,450 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm Hnedpfx Apswtg R Ae Den With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Sub-spindle: 4500 1/min Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw Tool speed max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight.: 6450 kg

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, overall weight: 3,100 kg, number of axes: 2, Horizontal turning machine manufactured in 2021. This DOOSAN Lynx 2100A features a maximum turning diameter of 350 mm and a turning length of 330 mm. It is equipped with a spindle speed of 6,000 rpm and a chuck size of 6” (160 mm). If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 2100A machine we have for sale. Contact us for further details. • Chuck size: 6" (160 mm) • Bar capacity through spindle: Ø52 mm • Max turning diameter: Ø350 mm • Max turning length: 330 mm • Rapid traverse (X/Z): 36 m/min • Tool size: 25 x 25 mm (OD), Ø32 mm (ID) • Turret: 12 stations, tool change time 0.15 s • Tailstock: Programmable with rotating tip • Options/features: Doosan tool load monitoring system; Automatic tool setting; High‑pressure coolant 7 bar (1.1 kW); Oil separator; Electrical noise suppression; Bar feeder preparation • Certification/Power: CE certification; Transformer Hnsdpfeyvqinsx Ap Djn • Operating hours: 2,898 h Additional equipment • Basic tool holder set • Oil mist extractor • Chip conveyor • Workpiece collecting box (parts collection) Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2014, operating hours: 240 h, fuel type: diesel, color: white, power: 360 kW (489.46 HP), total length: 4,010 mm, total width: 1,400 mm, total height: 2,110 mm, Power: 417 Current frequency: 50 Hz Voltage: 380/400 Hnjdpfoyiltdex Ap Djn Manufacturing country: United Kingdom

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 4,799 h, load capacity: 16,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: duplex, construction height: 4,870 mm, power: 118 kW (160.44 HP), fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift truck - Diesel Load center: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Very good Hnodjy Scxtepfx Ap Dsn Front tires type: Air Rear tires type: Air Description: Sideshift, tine adjuster, 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab,

Condition: excellent (used), Year of construction: 2016, operating hours: 3,204 h, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 562 mm, turning diameter: 390 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,700 mm, total length: 2,834 mm, total width: 1,628 mm, turning diameter over bed slide: 600 mm, overall weight: 3,500 kg, bar passage: 65 mm, chuck outer diameter: 210 mm, spindle nose: ASA A2#6, Equipment: documentation/manual, Doosan Puma GT 2100 CNC lathe, year 2016, in excellent working condition and ready for production. Reliable and high-performance machine, ideal for precision turning operations in small and medium batch production. Equipped with tailstock, 12-position static turret, tool presetting system, 6 boring bar holders, and chip conveyor. Only 3,204 cutting hours. The machine is sold complete with all paper manuals. Robust construction, high accuracy, and excellent productivity. Hsdpfxoy Dunwj Ap Denn An ideal solution for machine shops and subcontractors looking for a modern CNC lathe fully equipped with accessories. Machine available for inspection under power by appointment.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: ML0271-000198, spindle speed (max.): 6,000 rpm, spindle motor power: 15 W, total height: 1,600 mm, total length: 2,325 mm, total width: 1,600 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, type of input current: three-phase, bar passage: 51 mm, Equipment: documentation/manual, We are offering for sale a DOOSAN LYNX 220LSYC CNC lathe with a tailstock, in good condition, manufactured in 2015. It operated for 2 years in medium-volume series production and has since been used for smaller series and custom parts. Hodpfx Apoy Uwgqs Dsnn The machine is equipped with a chip conveyor, tool probe, and a chuck with collet chuck mounting. It also includes an LNS bar feeder, capable of handling bars up to 1.5 meters in length (included in the price). Other features include: part ejection, part catching and removal system, tool load monitoring, and an oil separator that extends the coolant's lifespan. It has a highly rigid, cast iron machine bed and a turret with 12 tool positions (24 positions in total). The dimensions refer only to the lathe itself. Weight: 2900 kg (the bar feeder has a separate weight). Net price. If you have any questions or require further information, please send us a message.