Used Doosan Dx 225 Lc for sale (268)

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: I Series, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DOOSAN DNM 6700L was manufactured in 2021. It features an impressive X-axis travel of 1,500 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine is equipped with a 30-position tool magazine and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 6700L vertical machining centre we have for sale. Contact us for further details. Cedpfx Ajz I S E Neqvori • Display: 15" • Program memory: 2 MB / up to 1,000 programs • Rapid traverse: X/Y 36 m/min, Z 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Automatic doors • Robot interface • Tool breakage detection in tool magazine • Ball screw nut cooling • Ethernet connection • Air clamp interface on table • Seat air check • Coolant level sensor • Mist collector interface • Coolant gun • Condition: Used, excellent condition, fully functional and regularly maintained • Quantity: 4 units available Additional equipment • Chip conveyor LNS MH500 (right side) • Belt-type oil skimmer • Vacuum pump Technical Specification Taper Size BT 40

Condition: ready for operation (used), functionality: fully functional, power: 107 kW (145.48 HP), empty load weight: 11,600 kg, Year of construction: 2010, Equipment: air conditioning, all wheel drive, cabin, Wheel Loader DOOSAN DL200 Cedpfxeyyy H Rj Aqveri Year: 2010 Approx. 14,000 operating hours 107 kW 11.6 tonnes - incl. bucket - hydraulic Volvo quick coupler - auxiliary hydraulic circuit up to the fork carrier - air conditioning - central lubrication - rearview camera - Good 20.5R25 tyres - Machine is immediately ready for operation! - Original paint! - Not cleaned and not repainted! - Direct from the construction site! Sale price: €22,900 net Available with new pallet forks for an extra charge! Also available with low-cost delivery!

Condition: used, power: 127 kW (172.67 HP), fuel tank capacity: 255 l, color: orange, lifting height: 2,750 mm, Year of construction: 2014 Operating hours: 6.540 Cjdoy Takijpfx Aqvjri Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 0i-MD, total height: 3,170 mm, total length: 5,500 mm, total width: 2,892 mm, table width: 760 mm, table length: 2,160 mm, table load: 1,800 kg, overall weight: 15,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 800 mm, spindle motor power: 18 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED vertical machining center “DOOSAN mod. DNM 750L-” with FANUC 0i-MD CNC Cjdpfsw D Aynex Aqvsri

Condition: good (used), Year of construction: 2012, 300mm max cutting diameter, 510mm mm max turned length, 51mm bar capacity, 11kW motor, Spindle speed 6,000 rpm, milling speed 6,000 rpm, sub-spindle speed 6,000rpm, C axis 0.001 degrees, Crodpfx Aqjzg Eb Djvji Fanuc oi-Series Control, 3 Jaw Chuck, Tool setter, 12 Station turret, parts catcher, parts conveyor

Condition: used, Year of construction: 2012, New mill spindle 2026 Turning diameter: 760 mm Turning length: 1540 mm Control: FANUC Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1000 mm X-axis travel: 630 x 220 mm Z-axis travel: 1585 x 1515 mm Y-axis travel: 230 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 12,000 rpm Tool changer: 40 positions Turret: 12 stations Tool holder: BMT 65 P, Capto Drive power: 26/22 kW Total power requirement: 100 kVA Machine weight: approx. 15.5 t Space required: approx. 6.1 x 2.7 x 3.0 m Options: High pressure coolant 60 bar Auto door & Safety Edge Auto tool setter Coolant blast for chuck jaw cleaning Coolant gun Dual chuck pressure Csdszg N Dispfx Aqvori LNS Bar feed interface Prep. for special steady rest lower turret Thru-coolant for Main and Sub spindle Tool load monotoring function Profibus 3 color patrol lamp Renishaw RMP60 INCL. high speed SKIp Function

Condition: ready for operation (used), Year of construction: 2019, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: ML0336-000164, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 51 mm, controller model: Siemens S828D, TECHNICAL DETAILS Main spindle speed: max. 6,000 rpm Travel in X-axis: 205 mm Travel in Z-axis: 560 mm Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 36 m/min Swinging diameter over bed / turret: 600 / 400 mm Torque: 127 Nm Hydraulic 3-jaw chuck: 170 mm Workpiece size: max. Ø 300 × 510 mm Bar diameter: max. 51 mm Chuck outer diameter: 152 mm Tool stations: 12 Tool cross-section: 20 × 20 mm Tools: max. 24 Turret indexing time: 0.11 s MACHINE DETAILS Control model: Siemens S828D Main motor power: 12.6 kW Power of driven tools: 6.2 kW High-pressure coolant pressure: 0.7 MPa Dimensions & Weight Machine dimensions (L × W × H): 2,540 × 1,595 × 1,693 mm Machine weight: 3,480 kg Operating hours: 43,500 h EQUIPMENT High-pressure coolant system, 0.7 MPa Transformer Chip conveyor Tool measurement / tool probe Collet chuck with 3 collets LNS bar feeder for bars up to max. 1.5 m length Crjdpfx Aozzx Igsqvoi Workpiece catcher and ejection system Tool load monitoring CE conformity Highly rigid cast iron machine bed 12-position turret with accommodation for max. 24 tools Automatic bar feeder Oil separator for coolant Roller-guided linear guides Documentation/manual Spindle speed continuously adjustable

Condition: used, Year of construction: 2023, operating hours: 482 h, lifting height: 4,900 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Bobcat D30NXS diesel forklift, year of manufacture: 12/2023, operating hours: only 482h!, rated load capacity: 3,000 kg, fork length: 1,200 mm, lift height: 4,900 mm, triplex mast, hydraulic side shift, engine: [45.6 kW/62 hp], weight: 4,901 kg, very good condition, fully operational and ready for immediate use! Crodpsyxkucsfx Aqvsi We are happy to provide a leasing or financing offer upon request. Mr. Mihm (Tel. ) will be glad to assist you. For more information, please visit our website. Subject to prior sale and errors excepted. Power steering, protective roof = Further information = Lifting capacity: 3,000 kg Closed height: 230 cm For more information, please contact Tobias Ebert.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 41,280 h, travel distance X-axis: 165 mm, travel distance Z-axis: 700 mm, total height: 2,200 mm, total width: 1,630 mm, overall weight: 9,000 kg, controller manufacturer: FANUC, controller model: Series 31i-MODEL A, product length (max.): 2,800 mm, number of axes: 8, This 8-axis DOOSAN PUMA TT 1800 SY was manufactured in 2012. It features a maximum turning diameter of 230 mm and a maximum workpiece length of 700 mm. The machine is equipped with two spindles and two turrets, providing enhanced machining capabilities. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN PUMA TT 1800 SY turn-mill centre we have for sale. Contact us for further details. Crodez I Rbvepfx Aqvsi - Operating Hours: 41,280 h (as of Spindle Hours: 24,632 h (as of Total Machined Parts (TEIL GESMT): 14,162 pcs- Number of Spindles: 2 (Main Spindle & Counter/Sub Spindle)- Main Spindle Speed Range: 50 - 5,000 rpm- Counter Spindle Speed Range: 50 - 6,000 rpm- Number of Turrets: 2 (Tool holders)- Powered/Driven Tools: Yes- C-Axes: 2- Y-Axes: 1 (Upper turret)- Max. Turning Diameter: 230 mm- Max. Workpiece Length: 700 mm- Power Supply Voltage: AC 200/220V, 3-Phase (PE, 50/60 Hz) / 400 V, 50 Hz- Rated Power (Nennleistung): 75.21 kVA- Full Load Current (Volllaststrom): 197.37 A- Interrupting Capacity (Unterbrechungsstrom): 13 kA- Short-Circuit Current (Kurzschluss-Strom): 25 kA- Schematic Output (Schaltplan-Ausgabe): PT1H31AA02- Additional Equipment & Accessories: * FMB turbo 8-80/3200 bar feeder * Chip conveyor * Coolant system with belt filter * Internal coolant supply (IKZ) & supply via turret head * Hydraulic power unit * Large selection of tool holders, collet chucks (REGO-FIX / ER), and turning inserts Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 220 mm, travel distance Z-axis: 400 mm, spindle motor power: 22,000 W, spindle speed (max.): 3,000 rpm, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: Series 18i-TB, number of axes: 2, Vertical turning machine manufactured in 2007. This DOOSAN PUMA V400-2SP features a maximum turning diameter of 400 mm and a turning height of 400 mm. It includes dual 8/12-station turrets and operates with a FANUC Series 18i-TB CNC control. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA V400-2SP machine we have for sale. Contact us for further details regarding this machine. • Control feature: Independent dual-channel operation (Right & Left) • Machine condition: Good working condition, currently under power Cedpfxjz Hb Hto Aqvori • Max. turning diameter: Ø 400 mm • Max. turning height: 400 mm • Max. swing over bed: Ø 490 mm • Chuck size: 315 mm • Spindle nose: A2-8 • Turrets: 2 × 8/12-station turrets • Guideways: Box guideways (heavy duty) Additional equipment • Rear/side chip conveyor with cart • High-pressure coolant system Technical Specification Driven Tools No

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 210 h, load capacity: 16,000 kg, lifting height: 4,500 mm, free lift: 1,470 mm, mast type: triplex, construction height: 3,035 mm, fork length: 2,400 mm, empty load weight: 26,850 kg, total length: 5,600 mm, construction width: 2,540 mm, Diesel forklift Load center: 1200 Mast type: Triplex Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Csdpfxozf Sfyj Aqvori Description: Very good, like-new condition. The unit will receive a new inspection and a new certification according to UVV (German regulations for occupational safety and health). Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield, heater, air conditioning, full free lift,

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min Crsdpfx Aoq Nqkxsqvoi SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC Fanuc Series Max. turning diameter on the machine bed: 780 mm Max. turning diameter on the carriage: 630 mm Max. turning diameter: 406 mm Max. turning length: 520 mm Bar passage: 65 mm Crjdpfxjyiu Dns Aqvji Spindle nose: ASA A2-6 Spindle bore: 52 mm Spindle speed: 5000 rpm Spindle motor power: 18.5 kW Tailstock bore: 45 mm Tailstock nose: ASA A2-5 Bellegrandi tool holders on the spindle and tailstock + 2 self-centering chucks X-axis travel: 260 mm Z-axis travel: 590 mm Y-axis travel: +102 - 51 mm B-axis travel: 590 mm Rapid traverse rate for X/Z/B axes: 30 m/min Rapid traverse rate for Y-axis: 10 m/min Turret type: BMT Number of turret stations: 12 Rotation speed of powered tools: 5000 rpm Dimensions: 3530x1863 mm, H=2163 mm Weight: 5900 kg No. 10 tool holders for powered tools.

Condition: used, Equipment: air conditioning, Year of manufacture: 2017 Year of construction: 2017 Operating hours: 7.480 Empty weight: 18.890 kg Dimensions (LxBxH): 810 x 292 x 348 cm Digging depth: 4.4 m Codpfjy Nwuksx Aqvori = Additional options and accessories = - Central lubrication - Rubber tracks

Condition: excellent (used), machine/vehicle number: JK-00316, Year of construction: 2009, lifting height: 4,700 mm, free lift: 1,620 mm, fuel type: electric, mast type: triplex, battery manufacturer: R&W, battery voltage: 80 V, fork length: 1,200 mm, Lifting capacity: 3.000 kg Maximum passing height: 222 cm CE mark: yes Technical condition: very good Visual appearance: very good Fork carriage: Sideshifter Latest inspection: 2025-11-03 Cedpfjx Itf Asx Aqveri Please contact Johanny Hendrikse for more information

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: FANUC, controller model: Doosan-FANUC 21i-MB, table width: 430 mm, table length: 920 mm, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 2, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 4, Equipment: documentation/manual, Tool Standard is CAT-40, 30 pieces of Tool-holders are attached to this machine 4th axis: rotary table included; Renishaw probe ready. through spindle coolant; spindle chiller; rigid tapping; rapid traverse 36,000 mm/min; manual pulse generator; air blast; coolant tank & pump; Cedpfx Aqsx Ncpgeveri chip tray;

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, DIESEL COMPRESSOR DIESEL DOOSAN 7/20, recently serviced!!! Codpsz Rvznefx Aqveri Compressor with documentation for registration in Poland. Technical specifications: capacity: 2.00 m3/min; working pressure: 7 Bar; engine: KUBOTA operating hours: 295h!!! year: 2023 Compressor is in perfect working order, ready for operation, with warranty. net price: 27,500 PLN gross price: 33,825 PLN Below is a link to a video showing the machine in operation.

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 10,127 h, load capacity: 5,500 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,800 mm, drive type: Diesel, Diesel forklift ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: normal Side shifter, 3rd valve. Csdpfxsz Axf Is Aqvsri

Condition: used, power: 127 kW (172.67 HP), color: orange, lifting height: 2,800 mm, Year of manufacture: 2017 Year of construction: 2017 Operating hours: 7.870 Number of cylinders: 6 Empty weight: 15.000 kg Carrying capacity: 10.885 kg GVW: 25.885 kg Cedpfx Aexxkf Seqvori Dimensions (LxBxH): 758 x 274 x 328 cm Engine type: Doosan Doosan DL06 Stage IV

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,317 h, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 350 mm, controller model: Fanuc i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 520 mm Travel range, Y-axis: 360 mm Travel range, Z-axis: 350 mm Spindle speed: 12,000 rpm Distance spindle to base plate: min. 150 mm / max. 500 mm Table area: 650 × 375 mm Table load: 2 × 200 kg Tool weight: max. 2.8 kg Tool magazine: 14 positions MACHINE DETAILS Control system: Fanuc i Dimensions & Weight Dimensions (L x W x H): 3,230 × 1,620 × 2,507 mm Machine weight: approx. 5,200 kg Operating hours: 14,317 h EQUIPMENT Rigid tapping – thread drilling without compensation chuck Spindle overspeed and power display Telescopic guards on the X, Y, and Z axes Rapid traverse in the X, Y, and Z axes Door safety switch 3-color indicator light Work area lighting Coolant supply from a 200-liter tank via adjustable coolant nozzles at the spindle nose Internal cooling Machine cover, closed on top / Top cover Oil skimmer Pneumatic clamping system A, 1 pair per pallet Automatic work area door with safety strip Coolant system with delivery pressure: 4.5 bar Csdpfx Ajzul R Ioqveri

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 12,000 rpm, total height: 3,295 mm, total width: 3,200 mm, overall weight: 12,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller manufacturer: FANUC, controller model: 31i-5, product length (max.): 3,537 mm, tool weight: 8,000 g, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DOOSAN VC 630/5Ax was manufactured in 2013. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a maximum workpiece weight capacity of 500 kg and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5Ax universal machining centre we have for sale. Contact us for further details. • Travels: A (tilt) +30° to -120°; C (rotation) 360° • Spindle nose to table: Standard 160–680 mm; with APC 210–730 mm Cjdpfxszt Rwqe Aqvjri • Spindle center to column guideway: 220 mm • Rapid traverse: X/Y/Z 40/40/36 m/min; A/C 20/30 rpm • Cutting feed: X/Y/Z 18,000 mm/min; A/C 7,200 deg/min • Table: Ø630 mm (standard); APC pallet 500 x 500 mm • Max workpiece: 500 kg; dimensions standard Ø730 x 500 mm; with APC Ø730 x 450 mm • Min table indexing: 0.001° • Spindle: Built-in; 12,000 rpm; ISO #40 7/24 BIG-PLUS (optional HSK-A63) • Max spindle torque: 204 N·m • Spindle motor power: FANUC 22/18.5 kW • ATC: MAS403 BT40 (options CAT40/DIN40); 40 tools (options 60/81/101/121); max tool Ø adj 80 mm, without adj 125 mm; max tool length 300 mm; fixed address; tool-to-tool 1.0 s; chip-to-chip 8.5 s

Condition: excellent (used), Year of construction: 2016, CNC FANUC 0i - TC Axes X, Y, Z: 1630, 762, 650 Crjdpoqzhfxjfx Aqvei Rapid traverse X – 30, Y – 30, Z -24 m/min Table size 1630 x 760 Usable table load of 1300 kg Spindle cone SK40 Spindle speed 12,000 rpm Tool magazine 30 Chip tank Linear guides in all axes (roller guided) Coolant nozzles on the spindle nose Electronic handwheel (transportable) for 3 axes 3 colors signal light Accesories Coolant system with pumps, spindle cooler, handwheel, transformer & 1x set of documentation

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, turning length: 1,540 mm, turning diameter over cross slide: 1,000 mm, turning diameter: 670 mm, spindle motor power: 30 W, spindle speed (min.): 30 rpm, spindle speed (max.): 3,000 rpm, spindle bore: 102 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 36 m/min, rotational speed (max.): 12,000 rpm, rotational speed (min.): 60 rpm, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​7-axis multitasking CNC turning center “DOOSAN model PUMA MX3100S” with orientable upper head equipped with tool changer, opposing spindles and Fanuc 31i-MB5 CNC. Codpfx Aqowdg Atovori

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 550 mm, turning length: 520 mm, turning diameter: 350 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 579 mm, spindle motor power: 18,500 W, total height: 1,700 mm, total length: 3,000 mm, total width: 1,600 mm, overall weight: 4,500 kg, chuck outer diameter: 250 mm, spindle nose: A2-6, bar diameter (max.): 76 mm, controller model: FANUC 18i-TB, Equipment: documentation/manual, CNC turning center with FANUC 18i-TB control. Main spindle with 10" chuck, equiped with subspindle and Live tool (C-axis) Credpfsyywufox Aqvoi max turning diameter ~13.8" (350 mm), max turning length ~20.5" (520 mm), bar capacity ~3.0" (76 mm), and spindle bore ~4.0" (102 mm).

Condition: used, Year of construction: 2016, Due to the large number of non-serious emails / emails will not be answered. Codjzyw Ipepfx Aqvjri WhatsApp "Errors, typos, and prior sale excepted."