Used Doosan Dx 225 Lc for sale (266)

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle speed 12,000rpm, BT40 spindle taper, Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Nsdpfox Dk Dlsx Agxowi Low Volt light, Through Spindle Coolant

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Njdpsxm Sxvsfx Agxjwi Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: excellent (used), fuel type: gas, Doosan G15S-2 Forklift truck Serial: DG01041 Nwjdpeiy Nppefx Agxoi Runs on LP GAS, up to 1500Kgs lift capacity, max lift height 4730mm, treble masts, tilt forwards and backwards, with sideshift, comes with fork extensions

Condition: like new (used), Year of construction: 2026, operating hours: 42 h, functionality: fully functional, overall weight: 6,500 kg, fuel type: diesel, power: 640 kW (870.16 HP), output current: 1,152 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 640 kW (870.16 HP), nominal power (apparent): 1,500 kVA, continuous power (apparent): 800 kVA, total length: 5,500 mm, total width: 1,800 mm, total height: 2,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, fuel: diesel, input voltage: 400 V, input frequency: 50 Hz, rotational speed (min.): 1,500 rpm, type of input current: three-phase, We have the following emergency power generators or grid replacement systems from our series production available for sale, with the following technical specifications: Condition: New, 2026 Engine: Doosan DP180LB Rated power: 700 kVA / 560 kW Speed: 1500 rpm Frequency: 50 Hz Rated voltage: 231/400 V - Includes batteries - Includes diesel tank (1000 L) Nedpfx Agswqai Hexswi - Includes circuit breaker 4P ABB XT7S - Includes control system (island operation) - On request, a control system for grid-parallel operation, load distribution, and peak load management can be provided for an additional charge. Seamless integration into your energy infrastructure. Complete unit installed in a sound-insulated, weatherproof container. Dimensions: 600x245x270 cm (L x W x H) Weight: 10,500 kg Warranty: 24 months or 2000 operating hours. The emergency power generator will be delivered in operational condition, including a documented load test of 60 minutes. Delivery, installation, and commissioning are available for an additional charge. Price: €73,000 net.

Condition: used, Year of construction: 2017, operating hours: 4,505 h, load capacity: 2,000 kg, lifting height: 4,500,000 mm, construction height: 2,170,000 mm, power: 33 kW (44.87 HP), gearing type: automatic, overall weight: 5,170 kg, empty load weight: 3,170 kg, total height: 22,500 mm, color: orange, first registration: 07/2017, maximum load weight: 2,000 kg, number of seats: 1, driver cabin: other, wheelbase: 1,400 mm, Equipment: cabin, front guard, head guard, sideshift, * German vehicle * Condition see photos * Completely new tires * only 4505 operating hours * TYPE: G20SC-5 LP * 1.565 kg lifting capacity at 500 mm heavy load distance * 905 kg lifting capacity at 1,700 mm heavy load distance * Lifting height: 4,500 mm * Load capacity: 2,000 kg * Mast type Doosan FFT with load protection grid * Fork length: 1,700 mm * Fork width: 80 mm * Integrated sideshift with hydraulic fork adjustment * Adjustment range up to 850 mm * 2.4 L LPG engine (HMC) * Automatic powershift transmission * Oil-cooled multi-disc brake * Full cab with protective roof * Driver's seat with restraint system * Windshield wiper * Towing device * Clear instruments * Ergonomic driver's seat * Turning radius: 2,050 mm * OSS (safety shutdown system) * Maximum speed 18 Km/h * Unladen weight: 3,170 kg * Tare weight: 5,170 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Nwedpjvhpr Hefx Agxoi Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: excellent (used), Year of construction: 2008, DOOSAN MX2000ST 9 AXIS MILL TURN CENTER Sub spindle and bottom Turret Both spindles have 200mm power chucks on at the moment but we also have a Heinbuck collet chuck available Nedpfxoydigms Agxjwi good package of tooling Shown working on our motorsport jobs all done in one! Can be demonstrated if required.

Condition: good (used), Year of construction: 2008, 1 used Doosan turning and milling center type Puma Mx 2000 T year 2008 with Fanuc 16 i-TB control Max. turning diameter Nedoqqivvopfx Agxswi 540 mm Max. turning length 1,020 mm Milling spindle Drive power: 18.5 kW Max. spindle speed: 10000 rpm B-axis: 240° Tool magazine / ATC Tool places: 80 Main spindle Drive power: 15 kW max. spindle speed 5,000 rpm max. bar capacity 65 mm Lower turret with 12 driven tool positions max. spindle speed: 4,000 rpm Chip conveyor and coolant system Weight 12 tons Height of the machine 2600 mm Technical data Errors excepted

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,117 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1050 mm Y-AXIS TRAVEL: 570 mm Z-AXIS TRAVEL: 510 mm DISTANCE SPINDLE NOSE-TABLE: 150-660 mm RAPID FEEDS X-Y-Z: 36 - 36 - 30 m/min SPINDLE: 15000 rpm; 10 - 17 kW; ISO 40 - DIN TABLE SIZE: 1300 x 570 mm MAX ADMITTED LOAD: 1000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 30 POS MAX TOOL DIAMETER: 80 (125) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: HEIDENHAIN TNC 620 WEIGHT: 6500 Kg OVERALL DIMENSIONS: 3110 x 2413 x 2985 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; Nedpfx Agezhc Anexjwi ETHERNET PORT ; USB PORT ; TOOL SETTER ; TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: excellent (used), Year of construction: 2016, CNC FANUC 0i - TC Axes X, Y, Z: 1630, 762, 650 Rapid traverse X – 30, Y – 30, Z -24 m/min Table size 1630 x 760 Usable table load of 1300 kg Spindle cone SK40 Spindle speed 12,000 rpm Tool magazine 30 Chip tank Nwodoqzhfxepfx Agxji Linear guides in all axes (roller guided) Coolant nozzles on the spindle nose Electronic handwheel (transportable) for 3 axes 3 colors signal light Accesories Coolant system with pumps, spindle cooler, handwheel, transformer & 1x set of documentation

Condition: used, functionality: fully functional, machine/vehicle number: 0025, Year of construction: 2023, operating hours: 200 h, load capacity: 6,000 kg, lifting height: 4,550 mm, fuel type: diesel, mast type: triplex, construction height: 2,540 mm, drive type: Diesel, Diesel forklift truck Chassis number: 0025 Mast type: Triplex Condition: Like new Technical condition: Very good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Nedpfoy Up Rzex Agxowi Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, roof cover, windscreen, heater, load guard, soot filter, full cabin, air conditioning, twin tires, safety light, interior mirror, exterior mirror, beacon, wiper, LED,

Condition: used, functionality: fully functional, machine/vehicle number: 0195, Year of construction: 2023, operating hours: 255 h, load capacity: 5,000 kg, lifting height: 4,700 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, total length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift truck Chassis number: 0195 Nwjdpfx Aey Up N Dogxei Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Reconditioned without warranty Technical condition: Very good Front tires Type: Superelastic Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Battery Volt: 80V Battery type: PzS Battery year of construction: 2023 Sideshift, fork positioner, 3rd valve, 4th valve,

Condition: used, functionality: fully functional, machine/vehicle number: 0032, Year of construction: 2016, operating hours: 4,000 h, load capacity: 4,500 kg, lifting height: 4,700 mm, free lift: 1,825 mm, fuel type: diesel, mast type: triplex, construction height: 2,325 mm, drive type: Diesel, Diesel forklift Chassis number: 0032 Mast type: Triplex Nwsdpfx Ajy Up Itogxei Gearbox: Automatic Technical condition: very good Side shift, 3rd valve, 4th valve,

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 3,500 kg, lifting height: 4,710 mm, free lift: 1,263 mm, fuel type: diesel, mast type: triplex, construction height: 2,220 mm, drive type: Diesel, Diesel forklift Mast type: Triplex Technical condition: normal Nwsdpfxey Up Hcs Agxji Sideshifter, 3rd valve, 4th valve, rear work light, front work light,

Condition: used, functionality: fully functional, machine/vehicle number: 0400, Year of construction: 2018, operating hours: 1,330 h, load capacity: 3,000 kg, lifting height: 6,010 mm, free lift: 1,900 mm, fuel type: electric, mast type: triplex, construction height: 2,660 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: 0400 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Non Marking Nwodpfey Up Dbex Agxoi Rear tire type: Non Marking Side shifter, 3rd valve, 4th valve, rear work light, front work light, non-marking tires,

Condition: used, functionality: fully functional, machine/vehicle number: 0148, Year of construction: 2021, operating hours: 500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,500 mm, fuel type: gas, mast type: triplex, construction height: 2,195 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift Chassis number: 0148 Load centre of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tyres type: Superelastic Front tyres condition: 60 - 80% Nwodjy Up Awspfx Agxsi Rear tyres type: Superelastic Rear tyres condition: 60 - 80% Side shift, 3rd valve, 4th valve, rear work light, front work light, roof cover, windscreen, half cabin, windscreen wiper,

Condition: used, functionality: fully functional, machine/vehicle number: 0095, Year of construction: 2021, operating hours: 355 h, load capacity: 2,500 kg, lifting height: 3,500 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,300 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: 0095 Load centre: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Superelastic Nodpfjy Upz Tex Agxowi Front tyres condition: 80 - 100% Rear tyres type: Superelastic Rear tyres condition: 80 - 100% Battery voltage: 80V Battery capacity: 625Ah Battery type: PzS Battery year: 2021 Sideshift, fork positioner, 3rd valve, rear work light, front work light, roof cover, solenoid valve, safety light, interior mirror,

Condition: used, functionality: fully functional, machine/vehicle number: 2969, Year of construction: 2018, operating hours: 4,255 h, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,460 mm, fuel type: electric, mast type: triplex, construction height: 2,045 mm, power: 12 kW (16.32 HP), fork length: 1,200 mm, empty load weight: 3,190 kg, total length: 1,891 mm, drive type: Elektro, construction width: 1,090 mm, Electric 3-wheel forklift Chassis number: 2969 Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully operational Technical condition: good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Battery voltage: 48V Battery Ah: 575Ah Battery type: PzS Nodpfxjy Upn Ts Agxswi Battery year: 2018 Side shifter, 3rd valve, 4th valve, front work lights, overhead guard, CE certificate, seat,

Condition: used, functionality: fully functional, machine/vehicle number: 3003, Year of construction: 2015, operating hours: 4,372 h, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, power: 10 kW (13.60 HP), drive type: Elektro, Electric 3-wheel forklift Chassis number: 3003 Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Super elastic Front tire condition: 60 - 80% Rear tire type: Super elastic Rear tire condition: 60 - 80% Battery voltage: 48V Battery type: PzS Side shifter, Nedpfx Agoy Upnmjxjwi 3rd valve, rear work lights, front work lights, roof cover, safety light,

Condition: used, functionality: fully functional, machine/vehicle number: 2506, Year of construction: 2020, operating hours: 271 h, load capacity: 1,250 kg, lifting height: 3,300 mm, fuel type: electric, mast type: telescopic, construction height: 2,005 mm, fork length: 1,200 mm, drive type: Elektro, High-lift truck Chassis number: 2506 Load centre: 600 Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: good Front tyre type: Superelastic Rear tyre type: Superelastic Battery voltage: 24V Battery type: PzS Battery year of manufacture: 2020 Nwjdpfxjy Uplxe Agxoi

Condition: used, Year of construction: 2008, turning length: 1,043 mm, turning diameter: 550 mm, spindle bore: 116 mm, spindle speed (max.): 2,000 rpm, CNC lathe, 2 axes, Doosan Puma 400B Year: 2008 Fanuc 21iTB with Manual Guide Max. turning diameter: 550mm Max. turning length: 1043mm Z-axis travel: -1100mm Chuck: 380mm Spindle bore: 116.5mm Max. spindle speed: 2000 rpm Spindle gearbox: low gear, high gear 10-tool turret Steady rest with SMW autoblock, diameter 30-245mm Measuring probe Tailstock Chip conveyor with tray and pump Documentation Nodpfx Agezh Uq Dexjwi

Condition: used, Year of construction: 2021, Technical details: rated capacity: 220 kVA Number of working hours: 0 h type of fuel: Diesel revolutions per minute of the motor:: 1500 rpm output voltage: 400 / 50 Hz V weight of the machine ca.: 2,2 t dimensions L x W x H: 3,3 x 1,2 x 2,24 m The generator is soundproofed. - NEW -New Diesel engine: Nodou U E Edepfx Agxswi -6-cylinder -type P086TI -with battery 2x 12Volt 90 Ah Generator: -alternating current -400Volt / 50Hz -current 318 A -speed 1500 rpm -protection class IP23 -Isolation class H *

Condition: like new (used), Year of construction: 2022, operating hours: 259 h, turning diameter over cross slide: 790 mm, turning length: 2,124 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 352 mm, travel distance Z-axis: 2,155 mm, spindle motor power: 35 W, rapid traverse X-axis: 16 m/min, rapid traverse Z-axis: 20 m/min, 2-axis CNC lathe "DOOSAN DNS mod. PUMA 4100LA" with DN Solutions-Fanuc i-Plus iHMI CNC Nodpjqrr Nwjfx Agxewi

Condition: used, Year of construction: 2009, operating hours: 42,497 h, functionality: fully functional, machine/vehicle number: L2203458, turning diameter: 510 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, bar diameter (max.): 32 mm, overall weight: 3,500 kg, Machine type: CNC lathe Manufacturer: Doosan Model: Lynx 220A Year of manufacture: 02/2009 Operating hours: 42,497h (power-on hours, as of 17.12.2025) Nwedpfx Asyxn D Iegxji Max. turning diameter: 510 mm X-axis travel: 175 mm Z-axis travel: 330 mm Spindle speed: 6,000 rpm Spindle power: 11 kW Tool changer: 12 positions Bar feeder: Ø8-32 mm Weight: 3,500 kg Transport, collection, and dismantling must be organized by the buyer.

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, overall weight: 73 kg, load capacity: 20 kg, arm reach: 1,700 mm, pivoting range: 360 °, controller manufacturer: Doosan Robotics, controller model: DSC, teach pendant manufacturer: Doosan Robotics, teach pendant model: TP, input voltage: 220 V, input current: 6 A, type of input current: AC, repeat accuracy: 0.05 mm, Doosan Robotics H2017 Collaborative Robot (Cobot) – 20 kg payload, 1700 mm reach. The robot has been used for laser welding and is in as-new condition with only 260 operating hours. It is fully functional and ready for immediate deployment. The robot is delivered complete with a stand, which is included in the price. The stand is designed to be easily moved with a pallet jack, allowing flexible positioning in the production environment. The laser welder (Gweike 1500W) is available as an add-on for 15,000 EUR – contact us for more information. Please note: The robot is not CE certified in its current configuration. Technical specifications: - Payload: 20 kg - Reach: 1700 mm - Degrees of freedom: 6 - Repeat accuracy: ±0.05 mm - Robot weight: 73 kg - Input voltage: 220V AC - Protection rating: IP54 (robot body) - Controller: Doosan Smart Controller (DSC) Nsdpfx Agjzia Evexjwi The robot is equipped with built-in force/torque sensing on all 6 joints, enabling safe human-robot collaboration without safety fencing in many applications. It supports Doosan's intuitive programming environment and is compatible with a wide range of end-of-arm tooling and accessories. Suitable for: laser welding, laser cutting, machine tending, palletizing, assembly, material handling, and other industrial applications.

Condition: used, Year of construction: 2014, turning diameter 376 mm turning length 760 mm control Fanuc x-axis 260 mm z-axis 830 mm weight of the machine ca. 6000 kg Nodoy Sblrjpfx Agxjwi