Used Diaphragm Accumulators for sale (616)

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE Lsdpfx Aeynzg Hjkleag

Condition: used, axle configuration: 2 axles, first registration: 03/2023, Equipment: ABS, Equipment: Sliding trailer 20 S * Dimensions and weights * External overall length approx. 7,055 mm Lsdey Trycepfx Akleag * Overall width approx. 2,500 mm * Laden height approx. 1,150 mm * Roller track length approx. 6,890 mm * Wheelbase 5,240 mm * Unladen weight approx. 3,460 kg * Technically permissible total weight approx. 20,000 kg * Permissible total weight approx. 18,000 kg * Payload approx. 14,540 kg * Designed for containers with a length of 5,000 to 7,000 mm according to DIN 30722. * (Technical changes reserved.) * Chassis: * Chassis construction made of welded I-beams in QSTE steel * 4 container locking devices and upper sliding frame locking device, pneumatically operated * Side protection device according to RL 89/297/EWG, closed (position 2) * Bogie: * Bogie 980 FM including ball bearing turntable 90/1100/22 (low maintenance) * Drawbar: * Drawbar 2600/980/100/30, inclined drawbar pin * with height adjustment (coil spring with locking mechanism) * Drawbar with DIN drawbar pin, internal diameter D=40mm, external diameter D=110, thickness 30mm * Axles: * 2 x 10 t axles for 19.5 disc brakes, ET 138, manufacturer at manufacturer's choice. * Disc brake diameter approx. 370mm, * Wheel fastening by center centering according to DIN 74 361 Part 3. * Braking system: * Air brake system according to EU directive with interlock-proof * Duomatik coupling head * Conventional air suspension system, * EBS Type 4S/3M, electronic braking system with ROLL Stability, * Double-diaphragm spring accumulator cylinder on the rear axle, * Release valve for separate release of the spring accumulator brake. * Lighting system: * Lighting system 24 Volt, full LED according to RL 76/756/EWG with multi-chamber lamp * (Hella) and license plate lights integrated into the light panel * 1 x 15-pole plug connection * 6 LED side marker reflector lights * 2 LED outline lights, white, at the front * 2 LED position lights at the rear, separately mounted * 1 reversing light (position 3) * Tires: * Regional traffic tires, tire manufacturer at manufacturer's choice * 8-ply 265/70R19.5 (7.5x19.5) * Steel wheels ET 138, wheel nuts unpainted * Underrun protection: * TÜV-tested underrun protection made of aluminum. * Two vertical delta-shaped impact protection profiles serve to protect the rear during * loading and unloading. * Accessories: * 4 plastic fenders, half-shells at the front and rear, single-wheel fenders * 4 anti-spray mud flaps * 1 lockable plastic toolbox * 1 chock with holder * 1 license plate holder * 1 A-sign for the transport of waste materials * 1 net box (position 4) * 2 container guides * 3 small EBB stickers (position 5) * Painting: * Chassis color: MB 7350 Novagrau * Upper sliding frame: MB 7350 Novagrau * Wheel hub color: black KTL * Rim color: RAL 9006 silver * Contouring marking at the rear: red * Contouring marking on the side: white * SSE: RAL 7001 Silbergrau (position 6) * Rear panel/light panels: RAL 7001 Silbergrau (position 6) * Underrun protection: aluminum-anodized (silver) * Locking hooks, container guides: yellow * Documentation: * Included in the scope of delivery: * Commissioning and brake test report * Operating instructions * Maintenance instructions from axle manufacturer * Spare wheel holder removed All information without guarantee. Errors and omissions excepted. Subject to prior sale.

Condition: used, axle configuration: 2 axles, first registration: 02/2023, next inspection (TÜV): 03/2027, Year of construction: 2023, Load securing: Body certified to EN 12642 XL. Drinks certificate. Daimler 9.5 certificate. 2 identification plates at the rear, 565x200, ECE-R70, vertically on the rear panel. Vehicle complies with EC type approval with Certificate of Conformity (CoC). 1 folding GGVS sign. Front crossmember height 125mm, rear 400+28mm, Smart Generation. Chassis: Standard version. "MODULOS" bolted chassis. E-bike holder, corbel version, screwed for 2 e-bikes, behind the unit. 10-year warranty against rust-through on galvanized parts (see warranty terms). Wheelbase 7700 mm. Axle distance 1310/1310 mm. Outer frame with Speed Curtain on both sides. Underrun protection. Kingpin: 2" according to SAE standard, interchangeable. 1 kingpin position 1690mm. Lateral impact protection in conjunction with a pallet box. Starting aid (liftable front axle), activated by "3x braking". Circular driving with the lifted 1st axle is not possible. Starting aid (liftable front axle), activated by "3x braking". Only permitted for use as a starting aid. Model SCS 24/L - 13.62 E B. Manufacturing date 01.02.2023. Body length 13620 MM. Body width 2480 MM. Front wall height 2400 MM. Body height at the front 2680 MM. Body height 2680 MM. Lateral front passage height 2600 MM. Lateral rear passage height 2600 MM. Total height at the front, unladen 4002 MM. Total height at the rear, unladen 3907 MM. Loading height at the rear, unladen 1197 MM. Tire size 385/65R22.5. Total weight (permissible/technical) 36000/39000 KG. Payload (permissible/technical) 28875/31875 KG. Unit weight (permissible/technical) 24000/27000 KG. Saddle load (permissible/technical) 12000/15000 KG. Tare weight, complete 7125 KG. Fifth wheel height, unladen 1155 MM. Ride height 270 MM. Wheelbase 7700 MM. Rear door height 2648 MM. Rear door width 2480 MM. Brake disc diameter approx. 430mm. ROTOS SCB running gear system (disc brake). Axle SCB 9 t, SP2040, FM1300, ET 120, disc brake 430 mm. Wheel fastening by center centering according to DIN 74 361 part 3. SCB air suspension type: MRH-KM30. Two-circuit compressed air braking system with standard couplings. Steel air tank. EBS 2S/2M with stability program. EBS power supply via ISO 7638 + CAN. Double diaphragm spring accumulator cylinder. Lifting and lowering device with AUTO-RESET function. 2 chock blocks with holder. Support jack, manufacturer "JOST", semi-circular foot with plate, single-sided operation, low maintenance. 1 LED lighting system 24V with multi-chamber light and dynamic turn signal. 2 sockets, 7-pin, 1x DIN ISO3731 / 1x DIN ISO1185 and 1 socket ISO12098. Continuous lamp carrier, color white, with "SCHMITZ" embossing. LED side marker lights coupled with turn signals. 1 pair of LED side marker lights. Without rear warning system / ramp approach aid. Tire brand: SCB ""SELECTION"" Continental/Goodyear/Dunlop/Hankook/Pirelli/Bridgestone. Regional transport tires (M+S). 6 tires 385/65R22.5 (11.75x22.5). Steel wheels, ET 120. Protective caps for wheel nuts. Anti-spray mud flaps with Schmitz logo. Lashing eyes: 30 pairs in the outer frame, 2 tons tensile force per eye, according to EN 12640. Ram protection for running rail, Speed Curtain. Pallet stop, straight on both sides of the outer frame, 19mm high, internal dimension 2460mm. Rubber ram protection at the rear. 2 rubber bumper buffers, vertically on the lamp panel. Pallet box for 24 Euro/16 ISO pallets. Ground clearance of the pallet box 286 MM. Holder for light and brake connection at the front of the headboar Lodozg R Hropfx Akleag

Condition: good (used), Murzan PI-50 Double diaphragm pump two in stock, ideal for handling suspended solids or shear sensitive products with no damage, easy to clean in place, applications juice, drinks, tomato paste, ketchup, yogurt, cottage cheese, eggs and more, 3 inch inlet and outlet, download PDF for full spec Lasdpfozvlkqjx Akljg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 358143, Hydra-Cell G10XKSGSFEMB diaphragm high pressure pump with 4 kW motor, build in inverter, manual control unit (on/off and speed), external cooling and 34,5-69 bar over pressure valve. Possible to switch to different control modes and ramps through DIP switches. Model: G10 X: Standard high-pressure performance K: Kel-Cell version S: 316L pump head G: Vition/FKM Diaphragm and O-ring S: 316L valve seat F: 316L valves E: Elgiloy valve springs M: Kynar/PVDF valve spring retainer B: 10W30 motor oil 30,6 liter/min (1,8 m3/h) at 1450 RPM. 69 bar (1000 psi) at 1450 RPM and 103 bar (1500 psi) at 790 RPM. Max inter pressure of 17 bar and 121 degree celcius maximum fluid temperature. Ljdpfxozv Ibfe Akljag Able to handle solid particles up to 500 microns (0,5 mm) It has a crack in the back left mounting foot (see picture)

Condition: used, This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech,food or cosmetic research centres or plants Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Lodsxx Avpspfx Akleag Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Condition: used, This listing is for a Quattroflow QF 1200-S Single-use Pump diaphragm pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF 1200-S is a sophisticated quaternary diaphragm pump specifically engineered for sterile fluid transfer in the pharmaceutical manufacturing and biotech sectors. Its compact design and advanced features position it as a top choice for applications requiring precision and contamination control. Here’s a closer look at its characteristics, advantages, and applications: Key Characteristics: Flow Rate: Capable of handling flow rates of up to 1200 litres per hour, making it versatile for various processing needs. Eccentric Shaft Design: Offers 3° and 5° angles for adjustable flow rates, tailoring the pump’s performance to specific applications. Pump Chamber Material: Available in both stainless steel for multi-use and polypropylene for single-use, catering to different operational requirements and preferences. Control System: Features an integrated pump controller (Q-Control) that allows for automated control and monitoring, enhancing operational efficiency and precision. Interfacing Options: Compatible with various flow and pressure sensors, ensuring seamless integration into existing systems for real-time monitoring. Model Variants: Includes several models such as QF30, QF150, QF1200, QF2500, and QF44, providing options to meet diverse process demands. Advantages: Low-Shear, Low-Slip, Low-Pulsation Performance: This design ensures the gentle transfer of critical biological fluids, preserving their integrity and functionality. Single-Use Positive Displacement Technology: Reduces maintenance costs significantly and enhances purification yields by minimizing the need for cleaning and validation. Lasdjxxz I Ropfx Akljg Total Product Containment: The unique seal-less design eliminates contamination risks and particle generation, ensuring the purity of the fluids being transferred. CIP/SIP-Capable and Autoclavable: Supports clean-in-place and sterilize-in-place protocols, making it suitable for sterile fluid transfer in highly regulated environments. Easy Installation and Replacement: The single-use pump chambers are quick to install and replace, streamlining workflows and minimizing downtime.

Condition: used, This listing is for a Quattroflow QF 1200-S Single-use Pump diaphragm pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF 1200-S is a sophisticated quaternary diaphragm pump specifically engineered for sterile fluid transfer in the pharmaceutical manufacturing and biotech sectors. Its compact design and advanced features position it as a top choice for applications requiring precision and contamination control. Here’s a closer look at its characteristics, advantages, and applications: Key Characteristics: Lsdoxxy S Uopfx Akljag Flow Rate: Capable of handling flow rates of up to 1200 litres per hour, making it versatile for various processing needs. Eccentric Shaft Design: Offers 3° and 5° angles for adjustable flow rates, tailoring the pump’s performance to specific applications. Pump Chamber Material: Available in both stainless steel for multi-use and polypropylene for single-use, catering to different operational requirements and preferences. Control System: Features an integrated pump controller (Q-Control) that allows for automated control and monitoring, enhancing operational efficiency and precision. Interfacing Options: Compatible with various flow and pressure sensors, ensuring seamless integration into existing systems for real-time monitoring. Model Variants: Includes several models such as QF30, QF150, QF1200, QF2500, and QF44, providing options to meet diverse process demands. Advantages: Low-Shear, Low-Slip, Low-Pulsation Performance: This design ensures the gentle transfer of critical biological fluids, preserving their integrity and functionality. Single-Use Positive Displacement Technology: Reduces maintenance costs significantly and enhances purification yields by minimizing the need for cleaning and validation. Total Product Containment: The unique seal-less design eliminates contamination risks and particle generation, ensuring the purity of the fluids being transferred. CIP/SIP-Capable and Autoclavable: Supports clean-in-place and sterilize-in-place protocols, making it suitable for sterile fluid transfer in highly regulated environments. Easy Installation and Replacement: The single-use pump chambers are quick to install and replace, streamlining workflows and minimizing downtime.

Condition: used, Rotary accumulation table Ø 1,000 mm with drive head and adjustable-speed gear motor. The motor drives both the rotary table and the conveyor chain. Direction: CW (clockwise). Ledpfxezzpggs Akljag

Condition: used, Abel Piston Diaphragm High-Pressure Pump as Feed Pump, used Model: TH-G332-200/2 Features: including drive unit Description: Robust and high-performance industrial piston diaphragm pump. This unit is ideally suited for demanding conveying tasks such as slurries, suspensions, or abrasive media. Manufacturer: ABEL Year of manufacture: 1993 Flow rate: approx. 30 m³/h Operating pressure: up to 1.5 MPa Lodpfxsy Exqlj Akloag Motor power: 15–18.5 kW Stroke rate: approx. 50 min⁻¹ Stroke length: 150 mm Equipment: Electric motor with drive unit, - Pulsation damper / pressure vessel - Piping & valves - Lubrication unit - Completely mounted on base frame Condition: used, tested (see inspection sticker) Applications: industry, mining and mineral processing, tunneling, chemical, wastewater treatment Availability: immediately ex stock, inspection by appointment possible

Condition: used, This listing is for 1 of 2 QuattroFlow QF15PTIU Single-use Pump Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The QuattroFlow QF 150 PTIU is an advanced single-use quaternary diaphragm pump tailored for biopharmaceutical applications, offering several notable features and benefits that enhance its functionality in sensitive environments. Here’s a detailed look at its specifications and advantages: Key Features and Specifications: Flow Rate: Operates within a range of 0.02 to 3.2 lpm (0.01 to 0.85 gph), making it highly adaptable for various bioprocessing tasks. Design: Utilizes a 4-piston diaphragm positive displacement system, which ensures total product containment. This design minimizes the risk of abrasion and particle shedding, crucial for maintaining product purity. Materials: Constructed from disposable machined polypropylene, the pump is designed specifically for single-use applications, significantly reducing contamination risks. Control System: Equipped with an integrated controller, allowing for automated operation and precise control over pump functions, which enhances efficiency and consistency in processes. Certifications: Complies with USP Class VI and 3.1B standards, as well as CFR FDA regulations, ensuring it meets the stringent requirements for biopharmaceutical manufacturing. Applications: The QF 150 PTIU is versatile and suitable for various critical applications, such as: Filtration Systems: Ideal for use in Tangential Flow Filtration (TFF) setups, where it can efficiently process biological solutions. Laodpfx Akjxxz Iwsljg Chromatography Systems: Effectively manages the flow of reagents and samples during separation processes. Feeding Pumps: Provides reliable and consistent dosing in various bioprocessing applications. Virus Filtration: Plays a pivotal role in ensuring the safety of biopharmaceutical products by filtering out contaminants. Sterile Filtration: Maintains sterility in critical processing steps, essential for product integrity. Key Benefits: Total Product Containment: Ensures that no product is lost or contaminated during transfer, vital for high-value biopharmaceuticals. Low Pulsation and Low Shear Operation: These features preserve delicate biological materials and maintain their integrity throughout the pumping process. Variable Flow Rate: Allows for flexibility in operations, accommodating different process needs easily. Quiet Operation: Minimizes noise during operation, making it suitable for laboratory and clinical environments. CIP/SIP Capable: Facilitates easy cleaning and sterilization, ensuring high hygiene standards are maintained. Autoclavable: Supports sterilization processes, enhancing its usability in critical applications. Single-Use Design: Reduces maintenance requirements and downtime, allowing for efficient workflow in biopharmaceutical settings.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, machine/vehicle number: A0008858, Used Verderer VA25S-A01AS2SSSSPTPT Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations., serial number: A0008858; year of manufacture: 2012. Very good condition The specific arrangement code you provided (VA25S-A01AS2SSSSPTPT) designates a heavy-duty metallic pump constructed with a Stainless Steel fluid section, Stainless Steel seats, and PTFE (Teflon) balls and diaphragms, and defines a heavy-duty, highly corrosion-resistant configuration of the Verderair VA 25 Air-Operated Double Diaphragm (AODD) pump. This specific model is typically engineered to handle aggressive chemicals, strong acids, solvents, and high-temperature fluids The operating limits and physical profile for the Verderair VA 25 SS SS TF TF include the following parameters: Connection Size (Liquid):1" BSP or NPT (Threaded) Connection Size (Air): 1/2" NPT Maximum Flow Rate: 189 liters per minute (50 GPM) Maximum Discharge Pressure: 8.6 bar (125 PSI) Maximum Fluid Temperature: 104°C (220°F) Limited by the PTFE components Maximum Suction Lift (Dry): 3.0 to 4.9 meters Maximum Suction Lift (Wet): 6.0 to 8.8 meters Maximum Particle Size: 3.2 mm (Solids handling capacity) Pump Weight: approx. 16.5 to 18.8 kg (heavy due to full-metal construction) Ljdpfx Akjz Abcpeleag Certifications: ATEX certified (safe for explosive atmospheres) Dimensions: L 470 mm x W 250 mm x H 360 mm SS (Fluid Section): 316 Stainless Steel housing and manifolds. Provides high chemical resistance and mechanical durability; SS (Air Section / Check Valve Seats): Depending on the generation, this represents a heavy-duty Stainless Steel center air section or Stainless Steel valve seats. It avoids the corrosion or cracking risks associated with aluminum or plastic components in harsh environmental conditions; TF (Check Valve Balls): PTFE (Teflon) check balls. Ensures a tight seal and broad chemical compatibility during cycling; TF (Diaphragms): PTFE (Teflon) diaphragms (typically backed by an EPDM layer for flexibility). PTFE offers the highest level of universal resistance to corrosive fluids; Price 2.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, Altınışık 1290 Fully Automatic Flexographic Slotter – 6,000 Sheets/Hour High-performance corrugated board flexographic printing, slotting & rotary die-cutting machine Available: Altınışık 1290 Fully Automatic Flexographic Slotter, designed for high-volume corrugated packaging production with fast automatic setup and reliable performance. Key specifications • Maximum sheet size: 1,290 × 2,600 mm • Skip-feed size: up to 1,550 × 2,600 mm • Minimum sheet size: 350 × 750 mm • Maximum printing area: 1,290 × 2,350 mm • Maximum board thickness: 10 mm Lodpfxjzy Sp Uj Aklsag • Production speed: up to 6,000 sheets/hour • Rotary die-cutting area: 1,240 × 2,350 mm • Slot width: 9 mm • Printing plate thickness: 3.9 mm • Main motor: 15 kW Features ✔️ Fully automatic computer-controlled setup ✔️ Touchscreen control system ✔️ Automatic slotting and creasing adjustment ✔️ Pneumatic inter-unit locking ✔️ Automatic gear lubrication ✔️ Pneumatic diaphragm ink pump ✔️ Hardened gears ✔️ Hard-chrome-plated shafts A strong production solution for corrugated box manufacturers, packaging companies and high-volume carton production. Machine: Altınışık 1290 Type: Fully Automatic Flexographic Slotter Capacity: Up to 6,000 sheets/hour

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 12J10E, Used unit of VerderAir VA50 Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations. The specific arrangement code you provided (VA50 SS SS TF TF) designates a heavy-duty metallic pump constructed with a stainless steel fluid section, stainless steel seats, and PTFE (Teflon) balls and diaphragms. SKU 810.2392, serial number: 12J10E, year of manufacture: 2010, maximum air pressure: 8.5 bar; MFR: 568 L/min; as good as new condition This Air Operated Diaphragm Pump is suitable for the transfer of chemicals, solvents, flammable liquids, and fluids with abrasive particles. Constructed of Stainless Steel and PTFE (Teflon) Energy efficient Easy to install, operate and maintain Anti-ice muffler Lsdpfx Aszz Twceklsag Free of air lubrication Non-stalling air valve Can run dry without damage Dry self-priming Key Technical Specifications Knowing these parameters can help you accurately list your pump for sale or verify if it meets your facility's operational needs: Maximum Flow Rate: 568 L/min (approx. 150 GPM) Maximum Discharge Pressure: 8.4 bar (approx. 122 PSI) Liquid Connections: 2" BSP/NPT Air Inlet Connection: 1/2" NPT Wetted Materials: Stainless Steel (SS) housing with PTFE (TF) diaphragms/balls, making it highly resistant to aggressive chemicals, solvents, and abrasive media. Maximum Suction Lift: 2.5 m (dry) / 5.5 m (wet) Certification: Standard metallic configurations usually come with ATEX certification for hazardous environments Price: 6.160 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. Wir sprechen Deutsch/Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, This listing is for a QuattroFLow QF15SU-U Single-use Pump Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF15SU-U is a specialized 4-piston diaphragm pump designed for single-use in biopharmaceutical applications. Its features and applications make it particularly advantageous for handling delicate fluids. Here’s a closer look: Key Features: Single-Use Pump Chamber: Constructed from plastic, this design significantly reduces contamination risks and the need for cleaning between uses. 4-Piston Diaphragm Design: Ensures smooth and consistent flow, critical for sensitive applications. Laedexxz Idspfx Akljg Self-Priming Capability: Can operate without priming, enhancing operational convenience, especially in processes where fluid levels fluctuate. Dry Running Capability: The pump can run dry without damage, providing flexibility in various operating conditions. No Rotating Parts: This design feature prevents heat generation and eliminates the risk of particle shedding, ensuring that the product remains uncontaminated and stable. Gentle Fluid Transfer: Designed to facilitate the safe and secure transfer of fluids, ideal for sensitive biological products. Applications: Biopharmaceutical Applications: Perfect for pumping aqueous solutions and biological products, especially those sensitive to shear forces, like proteins and enzymes. Research and Production Facilities: Suitable for use in laboratory or pilot plant environments, where precision and reliability are paramount. Re circulation of Feed/Retentate: Effective for processes involving membrane cassettes, hollow fibre, spiral wound, or ceramic filtration elements. Feed Pump for Filters: Works well as a feed pump for filter cartridges or plate and frame depth filters, ensuring optimal flow rates and minimal shear. Summary:

Condition: used, This listing is for Quattro Fluid SystemFlow 1000S Ledpfxjxhfp Rs Akleag The unit is in full working condition and ready for immediate use This four-piston quaternary diaphragm pump offers gentle, low-pulsation fluid transfer ideal for delicate biological materials, proteins, and cell suspensions in bioprocess applications

Condition: used, Year of construction: 2008, operating hours: 27,234 h, functionality: unexamined, overall weight: 1,200 kg, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 2,650 rpm, power: 11 kW (14.96 HP), input frequency: 50 Hz, input current: 45 A, year of last overhaul: 2019, We are offering this used Rösler Z 1200 ASS-2-turbo centrifugal dewatering machine for abrasive finishing applications, manufactured in 2008. Operating hours: 27,234 h Application: vibratory finishing machines 1x tilting sludge cart (forklift compatible) 1x two-compartment tank (650L dirty water / 650L clean water) with diaphragm pumps and agitator 1x aluminum drip tray for the tank Various fittings and sensors Electrical cables and pneumatic lines to be reconnected or replaced 1x PDF documentation in German Software backup to be performed by the buyer Warranty expired (last factory maintenance in 2019) Machine type: Z 1200 ASS-2-turbo Year of manufacture: 2008 Serial number: 44478/08 Centrifuge weight: 1200 kg Motor power: 11.0 kW Rated power: 20.00 kW Rated current: 45.0 A Maximum rotation speed: 2650 rpm Maximum load: 65 kg Maximum flow rate: 1000 l/h Supply voltage: 400 V Main supply: 400 3 Ph/N/PE V Frequency: 50 Hz Fuse protection: 50 A Lodpfx Akjy Rnfpelsag Control voltage: 24 V DC Maximum ambient temperature: 40 °C Product temperature range: 50 °C Inner diameter of the drum: 500 mm If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: refurbished (used), functionality: fully functional, Heavy duty ball valve pump Bottom ported Capacity: max. 988 LPM Laodpfx Aksx Tqaheljg Solids handling: max. 22 mm Discharge pressure: max. 8.6 bar Displacement per stroke: 6.81 liter Connection style: 3" 125# ANSI Pipe size: 80 mm

Condition: used, Year of construction: 2017, Overview Complete dressing line for sparkling wine in 750 ml glass bottles, rated at 5,000 bottles/h. The line runs from bottle washing and drying through capsuling and labelling to tray forming, wrap-around packing and vertical packing, linked by approximately 50 m of bottle conveyors, tray conveyors and two accumulation tables. The labelling machine dates from 2017, the packaging end from 2002 and the bottle washer-dryer from 2005. The line is still in production and can be visited on request. Technical data - Year of manufacture: 2017 (labelling machine); remaining machines 2002 to 2005 - Output: 5,000 bottles/h - Product: sparkling wine - Bottles: glass, 750 ml - Bottle conveyors: approx. 50 m total length - Accumulation tables: 2 - Electrical cabinet with power supply and automation included Scope of Delivery - Bottle washer and dryer | CAMES | WDT-12 | 2005 - Capsuling machine | Robino & Galandrino | ZENITH Z 2/16 OTTICO | 2004 - Labelling machine | Sacmi | KUBE K60 | 2017 - Tray former | CERMEX | F28.40 | 2002 - Tray former | CERMEX | F28.40 | 2002 - Bottle deviator | CERMEX | 2002 - Vertical packer | CERMEX | AN90 | 2002 - Wrap-around packer | CERMEX | WB45.00 | 2002 - Laser coder | LINX | SL301 - Hot-melt unit | Nordson - Bottle conveyors | Bobard, Thierion, Anduze | approx. 50 m total length | 2017 - Tray conveyors - 2 accumulation tables - Electrical cabinet with power supply and automation Condition Laedpfjz Dtymex Akleg In production. Inspection on site by appointment. Availability Available from 29 January 2027. Location: France.

Condition: used, Year of construction: 1998, Transnorm accumulation roller conveyor 19000-600-550 Laedpfx Akoy Nf Nielog RA2491 Make: Transnorm Roller width (RB): 550 mm Nominal/outer width (NB): 600 mm Length: 19000 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Drive Eletrical Data: 380 V, 0,37 kW Accumulating space size: 700 mm Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2022, condition: used, Serial number: l2100128 Functions: Mixing, grinding, emulsification, vacuum deaeration, direct and indirect heating, cooling. Ledpfx Ajzz Iuveklsag Rotating knives + counter-rotating scraper arm, with specific tank geometry for optimal product processing Technical specifications: Production capacity: 80 to 1,020 liters/hour Capacity: 246 L Temperature: -10/127°C Adjustable rotation speed from 300 rpm to 3,000 rpm Discharge via valve or by electrically tilting the tank 90° With diaphragm circulation pump Online auction following the closure of the Umiami Research & Development Centre in Villebon-sur-Yvette (Greater Paris, France), dedicated to the development of plant-based food products under the Swap Filet brand. The auction features more than 200 lots, including recent food preparation and processing equipment such as a STEPHAN UM 200 vacuum cooker/mixer (2022), a GOAVEC ENGINEERING mixer/cooler (2022) and a HANDTMANN VF 608 PLUS stainless steel vacuum filler (2022). The sale also includes a wide range of laboratory and process development equipment: Anton Paar particle size analyzer and rheometers, Stable Micro Systems texture analyzer, Dohmeyer cryo cabinets, Hounö and Unox ovens, Mettler Toledo metal detector, Anritsu checkweigher, Sartorius moisture analyzers, as well as numerous food preparation systems, laboratory instruments, stainless steel furniture, shelving, IT equipment and technical equipment. Sale organized by Dome Auctions France, Judicial Auction Office (OVV) No. 331-2026, conducted by auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Wednesday 23 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 21 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Dematic conveyor system Accumulating roller 40000-500-440 RA2344 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 40000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation slot size: 700 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.3 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Lajdpfxjvpu Hls Aklsg Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: as good as new (ex-display), Year of construction: 2015, Knapp roller conveyor accumulating sorter sorting system Fastlane 11200-375-290 RA1954 Brand: Knapp Running direction: both directions Belt spacing: 290 mm Nominal/outer width (NB): 375 mm Length: 11200 mm Frame height: 105 mm /190 mm with sorter Belt width: 35 mm Number of outfeeders: 6 pcs. Number of pneumatic accumulation places: 6 pcs. Belt conveying speed: 36 m/min Accumulation and sorting length: 600 mm. Package dimensions: min. 350 mm width and max. 650 mm length (with current position of the lifters. longer also possible with adjustment) Package properties: flat bottom is recommended or no sagging of the underside Theoretical sorting speed: 2.0 Sec/sorting, 1800 sortings per hour Electrical data: SEW geared motor 0.37 kW, 380V Scope of delivery: without supports, without side guides, with drive station, with light barriers and accumulation mechanism Optionally available: Supports Side guide on one and both sides Change of total length/position Faster motor for higher throughput rates (theoretically 3200 sorts per hour) Programming for sorting process Metal sheets to avoid hanging/sagging Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. Lodovzuxfepfx Akljag With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: like new (used), Year of construction: 2015, functionality: fully functional, The Wilden Saniflo™ Series pump line is specifically designed to meet the strict guidelines established for sanitary process applications. Saniflo™ pumps incorporate a straight flow-through design, large solids passage and efficiencies to insure process success. Saniflo™ pumps have a shear sensitive operation, Tri-clamp® style fittings and are offered in various surface finishes. The Saniflo™ pump line also offers pumps that are CIP (clean in place) and COP (clean out of place) for ease of use and maintenance. The pumps are now available with the Pro-Flo Shift air distribution systems! For sale is the American-made Wilden high-performance diaphragm pump shown in the picture. Food industry (pharmaceutical industry) certified with 3' output and input clamp connector. It was only tested once, otherwise completely new. Air (pneumatic operation) acid and alkali resistant inner and completely stainless housing. It can also pump large particle sizes. Similar pump: wildenstore.psgdover.com/products/aodd-pumps/item-15-12676-wilde -n-3inch-stainless-steel-pro-flo-shift/ New price: about 17000 USD. Ljdpfxjuwqivo Akleag

Year of construction: 2018, condition: used, machine/vehicle number: AT89, Used Tetra Pak helix accumulator 44 meters year 2018 The Used Tetra Pak helix accumulator 44 meters year 2018 efficiently accumulates and manages the production flow in aseptic packaging lines. Notably, Tetra Pak manufactured this model, identified as ACHX10-0400-44, in 2018 to handle brick-type carton containers. Laodpoyhbxpjfx Aklsg Technical and Functional Features To begin with, the Used Tetra Pak helix accumulator 44 meters year 2018 accumulates containers using a helical system that extends 44 meters. Its primary function is to compensate for speed variations between upstream and downstream machines. As a result, it optimizes production flow and prevents plant downtime. Furthermore, the ACHX10-0400-44 model provides high temporary storage capacity and maintains a continuous container flow without compromising structural integrity. Additionally, the helical architecture optimizes available space and reduces footprint compared to other linear accumulation systems. Consequently, thanks to this configuration, the Used Tetra Pak helix accumulator 44 meters year 2018 ensures high operational efficiency with a reduced footprint, making it particularly suitable for lines with complex layouts. Materials and Compatibility Moreover, the accumulator handles brick-type carton containers, ensuring gentle treatment that prevents deformations or damage to the packaging. In addition, the structure uses corrosion-resistant and easily sanitizable materials, thereby complying with food industry regulations. Similarly, the conveyor belts and internal components minimize friction, ensuring smooth container movement. Integration with the Production Line Importantly, the Used Tetra Pak helix accumulator integrates easily into existing packaging lines. This is primarily due to its compatibility with Tetra Pak filling and sealing machines. In particular, the advanced electronic control system synchronizes with production, dynamically adjusting the accumulation and release speed of containers based on operational needs. Consequently, this mechanism optimizes production flow management and significantly reduces the risk of congestion or slowdowns in the line. Operational Advantages By using the Used Tetra Pak helix accumulator manufacturers can significantly improve production efficiency. Specifically, it reduces machine downtime and optimizes overall plant performance. Furthermore, the compact and modular structure simplifies installation and maintenance, thus lowering operational costs. On top of that, Tetra Pak’s high-quality construction ensures system reliability, reinforcing the robustness and durability of its equipment. Conclusion of this Tetra Pak Accumulator All things considered, the Used Tetra Pak helix accumulator provides an advanced solution for managing production flow in aseptic packaging lines. Thanks to its storage capacity, operational efficiency, and compatibility with Tetra Pak systems, this model serves as an ideal option for plants requiring high performance and reliability in handling brick-type carton containers. Ultimately, it represents a reliable and effective investment for streamlining production processes.