Used Diaphragm Accumulators for sale (510)

Year of construction: 2023, condition: as good as new (ex-display), Technical data: Inlet width mm. 650 Chopping height mm. 300 Output approx. 70 - 80 srm/h wood chips Chipping length approx. mm. 25 to 30 Infeed rollers piece 4 Rotor flight circle mm. 800 Chipping knife piece 2 counter knife piece 1 Feed motors kW 2x4,0 with cardan shaft weight approx. 7.000 Kg. infeed : horizontal Machine base : steel, gas-shielded welded Rotor : steel, inert gas welded, dynamically balanced. Bearing : Oversized roller bearings. Bearing housing : steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Hydraulic system consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding by 2 gear motors, direct engagement, NORD GEAR. Hjdpfencd Duox Acvek

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 Hedpfxjncd Azo Acvek output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Condition: excellent (used), Year of construction: 2018, AUTOMATIC WEINIG LINE FOR GLUING AND FORMATTING SOLID WOOD PANELS AND TABLETOPS Net price of the line: 1,099,000 EUR Basic information – line components 1. Automatic loading system Model: IBR 760 Manufacturer: ABB Device type: Four-axis robot – automatic loading for the planer feeder Year of manufacture: 2023 2. Flat chain magazine Model: FEEDER WF 60 Manufacturer: WEINIG (Germany) Device type: Flat chain magazine at the planer Year of manufacture: 2018 Year of upgrade: 2023 3. Moulding and planing machine Model: POWERMAT 2400 Manufacturer: WEINIG (Germany) Device type: Planing and profiling machine Year of manufacture: 2018 Year of upgrade: 2023 4. High-frequency gluing press Model: PROFI PRESS T 5500 HF Manufacturer: WEINIG (Germany) Device type: High-frequency wooden panel gluing press with two HF generators Year of manufacture: 2018 Year of upgrade: 2023 5. Cross-cut saw Model: KT 2234035 Manufacturer: WEINIG (Germany) Device type: Cross-cut saw with transverse conveyor Year of manufacture: 2018 Year of upgrade: 2023 6. Longitudinal saw Model: KT 2234979 Manufacturer: WEINIG (Germany) Device type: Lengthwise formatting saw with automatic angle transfer station and powered outfeed roller conveyor Year of manufacture: 2018 Year of upgrade: 2023 A) Line composition and equipment: • ABB IBR 760 robot automatic loading system with loading cell • Automatic system for collecting separators between lamella layers • WEINIG FEEDER WF 60 flat chain magazine • WEINIG POWERMAT 2400 planing and profiling machine • Belt conveyor behind the planer with installed end stop and two ejectors • Automatic glue application station with precision gluing head • Diaphragm vacuum pump for drawing adhesive from 1,000 l IBC tank • High-performance lamella stacking system • Accumulating table with aligning pusher and upper pressure unit • WEINIG PROFI PRESS T 5500 HF press with two high-frequency generators • Mechanized components following PPT 5500 press • Cross-cut saw with transverse conveyor • Lengthwise formatting saw with automatic angle transfer station • Powered outfeed roller conveyor Hsdpjykzz Nsfx Acvjk • FAMAD DBNA-40T DUO scissor lift table (6,000 x 1,300 mm) near formatting saw • Roller buffer storage for glued panels – buffer fields: 40 running meters B) Material dimensions and range • Input wood length: 1,200 – 5,500 mm • Material width: 35 – 180 mm • Material thickness: 18 – 45 mm Performance: • ABB Robot: 1,000 mm/s • WEINIG WF 60 magazine: up to 40 cycles/min • POWERMAT 2400 moulder: up to 60 m/min • Press output depends on element dimensions and glue setting time Drive and power consumption • ABB Robot: 7 kW • WEINIG WF 60 Magazine: 1.1 kW • WEINIG POWERMAT 2400: 112 kW • PROFI PRESS T 5500 HF: 140 kW • Cross-cut saw: 13 kW • Lengthwise saw: 13 kW Media requirements • Electricity: 400 V / 3 phase • Chip and dust extraction • Compressed air • Internet C) Line application The WEINIG automatic line is designed for industrial production of solid wood panels and tabletops.

Condition: excellent (used), Year of construction: 2019, Ref:11075 . 2022 Horizon Stitchliner Mark III Only 8.35 million books made! Latest generation, fully automatic setting Sheet Collating and Saddle Stitched Booklet System. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections Hodpfxsywlifs Acvsk No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 12 station (1 x VAC 600Ha + 1 x VAC 600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. ST-40 stacker to Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 4 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer unit with centre cut PK-30 Kicker Shingle delivery belt.

Condition: excellent (used), Year of construction: 2008, pressing force: 150 t, overall weight: 10,800 kg, controller manufacturer: Cybelec, working length: 3,100 mm, working range: 3,100 mm, control type: CNC control, number of axes: 7, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, lower tooling, safety light barrier, upper tooling, For sale: 1 used High quality / very good condition German made Bystronic Pr150 3metre x 150ton cnc pressbrake With goose neck upper tooling that is 2 years old Bystronic Beyeler PR 150×3100 Make: Bystronic Model: PR 150 Pressure Reference Year / new: 2008 Total axis: 7 – 5axis back gauge X R Z1 Z2 X1 Free standing no pit required Capacity / bed size / tonnage: 3metre x 3100mm x 1500ton Cnc control: Cybelec Modeva 10s Fully serviced with Bystronic uk – as attached per photo General Information: Model: PR 150 x 3100 Manufactured: 2008 Specification: Working length mm 3100 press force kN 1500 stroke mm 315 Rapid Approach mm/s 190 Working speed mm/s 10 Return speed mm/s 150 Weight kg 10800 Electrical values: Power of main motor kW 11 Total Connected Load kW 15 Operating voltage V AC 3ph 400 Frequency Hz 50 Control Voltage v DC 24 Nominal Current Fuse A 35 Pneumatic: Max operating pressure bar 8 Hydraulic: Hedsh Eyxkspfx Acvsk Max accumulator pressure bar 300 Complete with used tooling yet we can also quote for brand new tooling to fit this machine to produce your steel products. Delivery to your factory and installation complete with training with your operators available

Condition: good (used), Year of construction: 2009, Ref: 11073 . 2009 AL-MEISTER PLS3310 Pluster Laminator 350mmx500mm single sided laminator for a wide variety of stock. Features: Very user friendly Cost saving, optimized efficiency Paper feeding, laminating and separating all in one go. Pluster ‘s unique feature is that the film setting information is stored for future reproduction. Fujipla's accumulated laminating technology provides excellent quality. Offset & digital printing on demand can be perfectly laminated with Fujipla's special SAP film. The most compact machine on the market with the lowest noise level. Can be used anywhere, from factories to office spaces or small areas. Specification: Processing Speed: 1.0-5.0m/min. (*1) Warm-up Time: Approx. 15-30min. (*2) Temperature Range: Ambience, 60-130°C Hjdpfjymz N Ssx Acvjk Feeder Max. Load: 100mm Paper Thickness: 115-300g/m2 Max. Paper Size: 350mm(W) × 500mm(L) Min. Paper Size: 318mm(W) X 450mm(L) Power Consumption: 1.0kw / 6A Power Source: AC220-240V Net Weight: 151.6kg

Condition: used, Comprehensively tested, used Olsa Process Mixing Suite. This mixing suite comprises of: Hedpfx Asymaz Hscvjk 2 off Olsa Pharmaceutical grade mirror polished 316 stainless steel vacuum mixer homogenising vessels.  Full hydraulic raise/lower with electrical panels, touchscreen PLC controls, CIP pumps, diaphragm product discharge pumps, both vessels on load cell system. Manuals/drawings included. Technical specification below for each main process vessel.   Vessel 1 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, contra rotating mixer 1.1kw, bottom entry high speed homogeniser 7.5kw.  Vessel rating 2.5bar plus full vacuum at 155 Degrees C.  Jacket 4.5bar 155 degrees C. CIP system.  150mm dia hinged chargeport with sight glass, vessel light.  Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet.  Vessel dimensions 1.3m x 2m x 2.4m closed.   Vessel 2 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, bottom entry high speed homogeniser 7.5kw.  Vessel rating 2.5bar plus full vacuum at 155 Degrees C.  Jacket 4.5bar 155 degrees C. CIP system.  150mm dia hinged chargeport with sight glass, vessel light.  Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet.  Vessel dimensions 1.3m x 2m x 2.4m closed.

Condition: used, -Manufacturer: Sera -Type: Suction lance SL-02 -Length: 1000mm -Immersion depth: 980 mm -Volume flow: 200 l/h -Manufacturer: Sera -Type: Diaphragm feed pump Hedpfxop Dt Ths Acvek -Power: 0.37 kW Volume flow: 120 l/h Permissible back pressure: 8 bar including digital level scale

Condition: ready for operation (used), Year of construction: 2011, operating hours: 78,454 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, displacement volume: 678 cm³, injection pressure: 2,007 bar, installation height: 330 mm, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, clamping force: 3000 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm opening stroke: 820 mm screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2007 bar equipment included machine without robot-system Hjdpfx Acjyxmz Ejvek screen text german CEE-socket 16A pressure accumulator for uprated injection speed core pulling hydraulically 2x machine without material hopper Anti vibration mounts interface robot EUROMAP 67 interface for handling Schuko-socket 10A measures of machine l x w x h: 6.5m x 2.2m x 2.3m total weight: 15000KG

Condition: used, Year of construction: 2003, Manufacturer: Pester pac automation Model: PEWO-pack 450 (with PEWO-therm tunnel) Year: 2003 Type: PE shrink wrapper/band wrapper with shrink tunnel Application: bottles, vials, vertical cartons, etc. Maximum speed: 60 products/min Passage width: 450 mm Configurable batch sizes Product guidance via upper belts and support rails Film type: PE Film width: 50–250 mm Film thickness: 0.025–0.10 mm Max. roll diameter 300 mm. Power supply: 3×400 V + N + PE, 50–60 Hz. Installed power: 10 kW (≈ 19.0 A) Air pressure: ≈ 5–10 bar The machine is sold with a dual-position feed conveyor: Feeding system for shrink wrapper Hjdpfox R D Adjx Acvok Accumulation conveyor feeder for manual packaging Various formats available Complete documentation

Condition: used, Year of construction: 2006, machine/vehicle number: 32463, Function: The contaminated solvent is collected in the filling tank. It is then pumped into the RSV1200AXCU distillation unit. Hjdpfx Aoyatd Uscvek There, the contaminated solvent evaporates and then condenses in the cooler. The condensate is then pumped into the collection container and bottled there for reuse. Technical data:- Manufacturer: FIDI / DREFI - Type: RSV 1200 AXCU - Year of manufacture: 2006 - LCD display and Logic HSE002 - Filling capacity: 120 liters - Boiler volume: 160 liters - Solvent 4-6 hours - Cooling time: approx. 3-7 hours - Operating temperature: 50 - 200 °C - Average quantity per hour: 30-50 liters - Manual boiler tilting - Electric power heating elements 4000+5500 watts- Collection tray with grates - Dimensions: WxLxH: 8.0 x 2.0 x 0.75 m with access ramp width 87 cm - 16 grates- Electrical power: ~ 10.20 kW - Steam condenser made of AISI304 stainless steel - Cooling block: air-cooled - Protection class: EX, ATEX, suitable for installation in Zone 1 . - Weight of RS 1200 AX only approx. 550 kg - Location: in storage- System with vacuum system - With vacuum container- Automatic filling and emptying device via diaphragm pumps. - 1 container, type BTA 1000 liters, filling - 1 container, type BTA 1000 liters, emptying

Condition: excellent (used), Butterfly valve, flap valve, ball valve, butterfly valve, gate valve, diaphragm valve, diaphragm shut-off valve, flanged shut-off valve -Manufacturer: KSB, gate valve type BOA-W Hodpfx Ajrp Ikrjcvok -Connection: DN 50 PN 6 -Number: 3x valve available -Price: per piece -Dimensions: 230/140/H260 mm -Weight: 8.6 kg/piece

Condition: good (used), machine/vehicle number: WMA18SZZ8GM685543, mileage: 195,000 km, power: 265 kW (360.30 HP), fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: ABS, air conditioning, differential lock, electric window regulation, power mirror, Technical information Engine capacity: 10.518 cc GVW: 19.120 kg Drivetrain Make of engine: MAN Axle configuration Front axle: Tyre size: 385/65R22.5; Suspension: leaf suspension Rear axle 1: Tyre size: 315/70R22.5; Suspension: air suspension Rear axle 2: Tyre size: 315/70R22.5; Suspension: air suspension Interior Steering wheel placement: Left Condition Technical condition: good Visual appearance: good Other information Vehicle's outer dimensions: 10,15x2,54x4 Production country: NL Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = - Cabin suspension - mechanical - Differential lock - Driver seat air-cushioned - Heated mirrors - PTO - Stereo = Remarks = The BLG road cleaner is suitable for use in emergencies and for performing preventive maintenance on specific road surfaces where a standard sweeper is not powerful enough. In Europe, for example, many roads are covered with ZOAB or other types of open concrete surfaces. Due to the open structure of these surfaces, dirt accumulates in the cavities. Other cleaning methods, such as sweeping or brushing, only “push” this dirt deeper into the cavities. This results in a very slippery road surface, especially in changing weather conditions. Because our road surface cleaner sprays the dirt loose under high pressure using dirt cutters and sucks everything up with the powerful fan, the draining effect of the road surface is maintained. This also makes the vehicle very suitable for effectively cleaning up oil and other serious contaminants such as paint. The advantages of the BLG road cleaner Hedpfxeyt A Txs Acvek 2.5 m wide suction nozzle with two suction hoses Very powerful fan with a capacity of 20,000 m3/hour Hydrostatic drive for optimum ease of use Autonomous thanks to the use of water recycling The suction nozzles can be tilted independently Equipped with a coarse debris filter Pump section equipped with sound insulation Equipped with brush-in system and HD system For very intensive road cleaning, we have developed a powerful road cleaner that cleans using high-pressure and vacuum technology. With a water supply of approx. 9 m³ and the use of water recycling, it offers a very high degree of autonomy. The combined clean and dirty water tank is made of 4 mm thick stainless steel. The dirty tank is emptied via the rear cover, which is also made of stainless steel and opens upwards by means of two cylinders. The BekkerLaGram road cleaner can be found on industrial sites, motorways, airports, factory sites and much more.

Condition: new, with compressed air cleaning and frequency converter Startup with frequency converter, Pressure transmitter for demand-based control Hodpoxpximofx Acvok Pre-separator integrated, Automatic fire extinguishing system integrated Efficient and economical: Large-capacity compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. So simple and so effective: OPTI JET cleaning and filter bags with snap ring closure. Exceptionally economical: energy-efficient drives according to IE3 Safe in case of emergency: maintenance-friendly fire extinguishing system. Extremely quiet operation: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic modes. Countless options from machine recognition to gate actuation to frequency-controlled operation, to name just three examples. Nothing left to chance: collection container with inspection window. Practical in every detail: container fastening with ergonomically shaped clamping lever. Expandable at any time: retrofit for discharge via briquetting press or rotary valve possible. - High extraction performance - Compact footprint - 100% air recirculation without temperature loss - (Residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control system - Optimal filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust barrier for dust-free bin changes - (Optional: safety locking system for the containers) - Freely configurable module exchange and expandable ----- Technical Data ----- Extraction nozzle diameter: 350 mm, Nominal air flow rate: 6,927 m³/h, Maximum air flow rate: 8,500 m³/h, Maximum negative pressure: 2,543 Pa, Filter surface: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3, Motor 400 V: 11.0 kW, Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency inverter Pressure transmitter for demand-based control Pre-separator integrated Extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Extremely efficient: Energy-efficient IE3-class drives. Safe in case of emergency: Service-friendly extinguishing system. Exceptionally quiet: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options, such as machine recognition, damper control, and frequency-controlled operation, to name just a few. No mess: Collection container with inspection viewing window. Practical down to the last detail: Container locking with ergonomically shaped clamping lever. Easy retrofitting: Can be converted for discharge via briquette press or rotary valve. - high extraction capacity - minimal space requirement - 100% air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimal filter cleaning - minimal noise level - optional: patented fill level monitoring - service-friendly, certified fire extinguishing system - dust barrier for dust-free container change - (optional: safety interlock for containers) - modules freely configurable and expandable ----- Technical Data ----- Extraction nozzle Ø: 355 mm Nominal air flow: 7,127 m³/h Max. air flow: 10,000 m³/h Max. negative pressure: 3,347 Pa Filter area: 73 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor 400 V: 15.0 kW Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm Hedpfx Aswzyh Rscvek Sound pressure level: 73 dB(A) Weight: 1,064 kg according to: GS - HO - 07

Condition: new, Integrated pre-separator Integrated automatic extinguishing system Efficient and economical: large-volume compressed air tank with with fast-switching diaphragm valves for effective OPTI JET filter cleaning and minimum compressed air consumption. So simple and so effective: OPTI JET cleaning and bag filter with bag filter with snap ring lock. Extremely economical: Energy-efficient drives in accordance with IE3 Safe in the event of an emergency: Maintenance-friendly automatic extinguishing system. Peace and quiet: the soundproofed air recirculation system from AL-KO. All options are open: PLC control for manual and automatic automatic operation. Countless options from machine detection to slide control to frequency-controlled operation operation, to name just three examples. Nothing goes wrong: Collecting container with inspection window. Practical down to the last detail: container lock with ergonomically ergonomically shaped clamping lever. Can be retrofitted: conversion to discharge via briquetting press briquetting press or rotary feeder possible. - High suction capacity - little space requirement - 100 % air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level Hsdsu R S A Rjpfx Acvjk - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change - (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 300 mm, Nominal volume flow: 5,089 m³/h, max. volume flow: 6,000 m³/h, max. negative pressure: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, according to: GS - HO - 07 - new exhibition machine -

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, total length: 6,700 mm, total width: 1,600 mm, total height: 2,300 mm, overall weight: 10,900 kg, clamping force: 1600 kN distance between tie-bars h x v: 520 x 470 mm size of mould plates h x v: 710 x 660 mm min. mould height: 200 mm max. mould height: 600 mm opening stroke: 1050 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included screen text german CEE-socket 16A CEE-socket 32A pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs core pulling pneum. 2 x Hodpfx Asyv D Hgecvsk machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for dosing unit interface for temperature control units interface USB Schuko-socket 10A wear-resistant injection unit mould heating 24x measures of machine l x w x h: 6.7m x 1.6m x 2.3m total weight: 10900KG

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity Hsdpfx Aeyxdwdjcvjk • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12902*19845, Year of construction: 2020, The forklift is a returned lease vehicle. The original purchase price was €313,926.00. The technical data corresponds to the original invoice. The seller does not accept liability for this information. The operating hours are based on the status as of April 2025; additional hours have accrued since then. TECHNICAL DETAILS Lifting height: 19,065 mm Load center: 1,220 mm External turning radius: 6,000 mm Overall height: 10,490–19,710 mm Side clamps Sideshift: ±600 mm Tilt compensation: ±6° hydraulic, mechanical height compensation 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Engine Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW / 1,175 Nm at 1,600 rpm Displacement: 7.7 liters / 6 cylinders / EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 (track width: 4,600 mm) Electrical system: 24 V CAN bus system with 7" color display EQUIPMENT Box frame, bolted tanks, mudguards Operator protection roof (steel construction) External rear-view mirrors (high mounted) Variable piston pumps with return flow filter (10 µm) Joystick control with power steering Pressure accumulator for lift mast (60 bar / 2 liters) LED lighting (position, indicator, work, and rear lights) Cab (OPTIMA): L x W x H = 1,605 x 1,480 x 1,620 mm 3 wipers, ventilation, opening side windows Electric 24V socket (10A), internal rear-view mirror, coat hook Duplex mast 6/7: lifting height 2,310–19,070 mm, overall height 10,490–19,710 mm Spreader: ELME 584LD, side twin-spreader 20–40", with hooks and side clamps Central lubrication system 'Lincoln' Reversing camera (MOTEC, 6.7" color display, heated lens) Hsdpfx Acjyly Ecovek Fire extinguisher (6 kg, mounted externally on the left) Tyres: Size: 14.00 x 24" / PR24, Manufacturer: Michelin XZM Operating manual, driver’s handbook, spare parts catalogue

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12931*19911, Year of construction: 2020, This forklift is a returned lease vehicle. The technical data corresponds to the original invoice; the seller assumes no liability for this information. Box-frame chassis Box frame, bolted tanks, mudguards, 2+2 crane lugs – step on the left side, handrail on the left side – external rearview mirrors on the fender, high-mounted, per pair – driver protection roof, steel construction – mudguards front/rear Drive system (diesel engine, transmission, drive/steering axles) – standard engine air filter, 2-stage element, with insert & indicator – wheel nut protection (10–25 t) – ZF automatic transmission 4WG-191-B – Volvo TAD-881-VE (requires ZF-191), 185 kW/1175 Nm/1600 rpm / 7.7 L / 6 cylinders EU Stage V – engine pre-heater 220 V, electric – Turbo II heavy-duty air filter – Kessler drive axle D91 (W = 4600 mm) Load-sensing hydraulic system with pressure and flow control (low energy consumption) Variable displacement piston pumps, return filter (10 µm) – hydraulic functions for lifting, tilting, and spreader, 1 joystick, power steering – pressure accumulator for lift mast 60 bar/2L (shock absorbing) – Hydraulic Long Life Filter (HLL), 12,000 h, 3 µm, change every 4,000 h – hydraulic oil tank pre-heating (I) – additional hydraulic oil cooler Hsdpfx Aceylyi Iovok Electrical system 24 V electrical system, monitoring system, CAN-Bus, 7” color display MD4 – LED lights (position/indicator/headlights) & LED work lights (2 on fenders, 2 on mast, 2 rear lights) – additional LED work lights (3000 lumen) on lamp console – qty 4 – Additional LED work lights (3000 lumen) on the boom – qty 2 – additional LED work lights (3000 lumen) on the front fenders – qty 4 – lamp console on the cab roof – reverse alarm – LED beacon (on lamp console) – one (1) 400V/3-phase power outlet for all heaters Electronic machine control (EMC) EMC Master incl. MD4 controller, 7" touch color display (A) – EMC 106 complete monitoring (engine, transmission, hydraulics, levers/joystick & service) – EMC 114 electronic joystick with RPM ramp-up – EMC 123 ECO drive module (fuel functions & settings) – EMC 124 driver login (up to 20 logins) – EMC 125 data logging module (alarm+error) – EMC 129 hour meter – EMC 122 maximum speed (specified 20 km/h) OPTIMA – Driver's Cabin Cabin Optima (L x W x H = 1605 x 1480 x 1620 mm) – solid cab, 1 joystick, ventilation, 3 wipers – opening window (right+left), interior rearview mirror (right) – Electrical 24V / 10A / 12.5mm socket / front right – coat hooks (2x) on rear wall of cabin (left and right) – additional trainer seat, 2-point belt, left side – driver seat Isringhausen ISRI 6830KA/870 (air suspension, heating, ventilation, 3-point belt) – DAB/analog radio with Bluetooth, MP3, AUX, USB, 2 speakers – variable wipers front/roof/rear window – ACC air conditioning – electrical 24V / 10A / 12.5mm socket / cab roof right – electrical 12V / 10A / 21.4mm socket / front right – electric cab heater including power socket – long sun visors (roof and front window) – additional rearview mirror (left side) –

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12902*19846, Year of construction: 2020, The forklift is a returned lease vehicle. The original purchase price was €313,926.00. The technical data corresponds to the original invoice. The seller does not accept liability for this information. The operating hours are based on the status as of April 2025; additional hours have accrued since then. TECHNICAL DETAILS Lifting height: 19,065 mm Load center: 1,220 mm External turning radius: 6,000 mm Overall height: 10,490–19,710 mm Side clamps Sideshift: ±600 mm Tilt compensation: ±6° hydraulic, mechanical height compensation 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Engine Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW / 1,175 Nm at 1,600 rpm Displacement: 7.7 liters / 6 cylinders / EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 (track width: 4,600 mm) Hodpfxsyly Dxs Acvsk Electrical system: 24 V CAN bus system with 7" color display EQUIPMENT Box frame, bolted tanks, mudguards Operator protection roof (steel construction) External rear-view mirrors (high mounted) Variable piston pumps with return flow filter (10 µm) Joystick control with power steering Pressure accumulator for lift mast (60 bar / 2 liters) LED lighting (position, indicator, work, and rear lights) Cab (OPTIMA): L x W x H = 1,605 x 1,480 x 1,620 mm 3 wipers, ventilation, opening side windows Electric 24V socket (10A), internal rear-view mirror, coat hook Duplex mast 6/7: lifting height 2,310–19,070 mm, overall height 10,490–19,710 mm Spreader: ELME 584LD, side twin-spreader 20–40", with hooks and side clamps Central lubrication system 'Lincoln' Reversing camera (MOTEC, 6.7" color display, heated lens) Fire extinguisher (6 kg, mounted externally on the left) Tyres: Size: 14.00 x 24" / PR24, Manufacturer: Michelin XZM Operating manual, driver’s handbook, spare parts catalogue

Year of construction: 2026, condition: new, functionality: fully functional, new PMH filament line extruder 30 mm - 28 l/d with noozle for 3D-filament with cooling tank with blow-up system for adhesive water with Laser control system (option) Hedpfxoch Sfqe Acvek with puller with filament accumulator (option) with winder and traverse guide MADE in GERMANY

Condition: used, Year of construction: 2012, Rotary UPS System – 800 kVA –Marelli + Rotabloc Availability: In stock (2 units) Location: UK High-quality Rotary UPS System with integrated components: ✅ Marelli Generator – MJB 400 LB4 B2 ✅ Rotabloc Alternator – ALT-800 ✅ Rotabloc Flywheel Accumulator – ACC-1000 Technical Specs Marelli Generator 800 kVA 400 V / 480 V – 50/60 Hz 1155 A / 962 A 1500 / 1800 rpm Weight: 2709 kg Made in Italy (2012) Rotabloc Alternator (ALT-800) 800 kVA 400 / 480 V Hodpswuyzwjfx Acvok 50 / 60 Hz Weight: 2750 kg Made in Belgium (2012) Flywheel (ACC-1000) 800 kW Drum speed: up to 3000 rpm Weight: 5250 kg Made in Belgium ✅ Advantages No batteries required – flywheel technology Immediate response during grid failure Built to ISO9001 / CE standards Reliable, compact, and scalable

Year of construction: 2021, condition: like new (used), Required air-pressure 7 bar weight 3 kg dimensions of the machine ca. 212 x 265 X 200 mm BxHxT Air Operated Diaphragm Pump Type(s) DL15-PM-TTT Technical data: - Connection size medium - 1/2" BSPT female thread - Material housing - PP polypropylene - Center section - PP polypropylene - Diaphragm material - PTFE - O-ring material - PTFE - Check valve material - PTFE - Max. flow rate - 2.2 m³/h - Max. medium pressure - 7 bar Hedpfx Asul Edvscvok - Compressed air supply - up to 7 bar - Solid size max. - 2.5 mm - Dry suction max. - 2.5 m - Dimensions WxHXT - 212 x 265 X 200 mm - Net weight - 3.5 kg PTFE diaphragm for the highest chemical requirements, very good resistance to aggressive media and chemicals, temperature range: -5 °C - +130 °C. PP polypropylene housing is highly resistant to acids, many water-soluble, inorganic acids and bases. Also available as electrically conductive housing material. Temperature range: 0°C - +60°C

Condition: used, Year of construction: 2015, _____The ECO IceFighter consists of a stainless steel frame, a tank made of special plastic, a dry-running and brine-proof piston diaphragm pump with OFF/ON switch and plugs, a proportional control valve for regulating the spray volume with 3 electrically switchable zone valves, pressure gauge, shut-off valve, a spray tube with 3 types of stainless steel spray nozzles and the necessary filters to prevent the nozzles from clogging. SB8 spray bar - 3 zones - spraying width 3.0 mtr- drive with hydraulic motor for oil volume up to 60 l/min- automatic refuelling - when the maximum level is reached, the refuelling process is automatically switched off (must be prepared in the brine preparation - the signal comes from the brine preparation) with standardized 4-pin plug- C-filler neck + stainless steel overflow (except C-coupling) Large overflow incl. shut-off valve for shutting off. Shut-off valve for shutting off after the filling process, storage location: 54595 Prüm Hjdjgqz A Rspfx Acvok