Used Demag Df 115 C for sale (509)

Condition: good (used), fuel type: diesel, color: yellow, first registration: 03/1988, Year of construction: 1988, operating hours: 4,808 h, Model year: 1988 Number of cylinders: 6 Technical condition: good Visual condition: good Damages: none Please contact Frits for further information. Hjdeutv Uujpfx Adboi

Condition: ready for operation (used), Clamping force: 350kN, tie bar distance: 280mm/280mm, platen dimensions X/Y: 410mm/410mm, min. mold installation height: 180mm, max. opening stroke: 350mm, max. platen distance: 530mm, screw diameter: 22mm, shot volume: 47.5cm³, shot weight (PS): 41g, injection pressure: 2440bar, control: NC4, heating power: 6.3kW. Machine dimensions X/Y/Z: approx. 3100mm/1100mm/1600mm, weight: approx. 1800kg. On-site inspection is possible. Hodpfxowaa H Do Adbji

Condition: used, Year of construction: 2008, operating hours: 5,281 h, * Type: Demag DF 65P * Year of manufacture: 2008 * Power: 52 kW Hjdpfxjwc Igwo Adbei -----Internal vehicle number: 10326----Errors and prior sale excepted. WhatsApp support available! If you have questions about the vehicle or require further information, feel free to contact us conveniently via WhatsApp. Whatsapp German, English -- Whatsapp German, English, Arabic

Condition: excellent (used), Control switch Make DEMAG Type DSE 10 C/CS Documents available Hjdpfxsf Ezbts Adbei

Condition: used, Year of construction: 2006, weight max. 500 kg throat 4.000 mm base plate 0,7 x 0,7 m Hodeu Hq Rropfx Adboi dimensions of the machine ca. 4,1 x 0,7 x 5,1 m Crane DEMAG - DC-COM 1/1 H5

Condition: used, mileage: 221,291 km, Year of construction: 2009, operating hours: 15,356 h, Drivetrain Drive: Wheel Weights Hsdjwwqbyjpfx Adboi Empty weight: 22.000 kg Functional Lifting capacity: 30.000 kg Identification Serial number: 86584 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 8.3x2.4x3.45 Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, General information Field of application: Construction Serial number: 82609 Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Hsdpfx Ajwk T Uiedbei Functional Lifting capacity: 220.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Identification Serial number: 82609 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Hedowk Aw Hspfx Adboi Carrier engine: - Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Suspension crane runway Crane system made of aluminum system profile similar to GIS GISKB ALU, EEPOS, KITO ProSystem, ERIKKILA No DEMAG but similar to KBK Overhead monorail system with single girder crane bridge Light crane system made of aluminum system profiles Load capacity: 125 kg Span: 3.2 meters as single girder bridge Profile height: 155 mm Profile width: 100 mm - Natural anodized aluminium profiles - Carriage with smooth-running plastic rollers - Power supply via trailing cable on the wire rope Consisting of: Hedpjuch Rfofx Adboi 2 pieces of 4.8 meter aluminum system profile for the longitudinal track with 3 suspension eyelets each 1 piece of 3.35 meter aluminum system profile for the crossbeam (single girder bridge) with 2 suspension eyelets 1 trolley for crane suspension on the crossbeam 1 carriage on the longitudinal beams (2 pieces) 6 end covers suitable for the profile rails Weight of profile rails: 125 kg Very good condition, as good as new Hoists can be found in our WebShop under the search term "chain hoist" You can find suitable assembly material in our WebShop under the search term "KBK"

Condition: ready for operation (used), Year of construction: 2013, operating hours: 27,551 h, clamping force: 2,200 kN, total height: 2,100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 22 Machine Benefits Technical Machine Benefits • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / maximum shot volume: 329 cm³ / maximum shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Dosing stroke: 207 mm / maximum nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kn / number of heating zones: 4 / hopper capacity: 50 l / maximum injection speed: 160 mm/s • Holding force: 2420 kn / maximum opening stroke: 550 mm / minimum mold height: 300 mm / maximum mold height: 580 mm / maximum platen distance: 1130 mm • Mold clamping plates (hxv): 880x830 mm / clearance between tie bars (hxv): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kn • Dry cycle time according to euromap 6 (stroke): 427 mm Hjdpjx D Hnyefx Adbji • Net weight without oil: 10100 kg Dimensions Machine Depth 6460 mm

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Hsdpsymqz Rsfx Adboi

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) Hsdpfx Adoymqz Djbsi delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 398 cm³, injection pressure: 1,550 bar, overall weight: 5,700 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Hodpfsymqzqox Adboi

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 398 cm³, injection pressure: 1,550 bar, overall weight: 5,700 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) Hedpfx Adjymqzkobsi delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2004, clamping force: 200 kN, displacement volume: 763 cm³, injection pressure: 1,905 bar, overall weight: 10,600 kg, screw conveyor diameter: 60 mm, terms of delivery: EXW (ex Works) delivery time: on request Hedpfx Asylz Apedbji terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2003, clamping force: 150 kN, displacement volume: 399 cm³, injection pressure: 1,598 bar, overall weight: 7,500 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request Hedpfx Asylz Aiodbei terms of payment: 100% prior to delivery

Condition: used, mileage: 411 km, power: 22 kW (29.91 HP), fuel type: diesel, color: yellow, empty load weight: 760 kg, gearing type: mechanical, operating hours: 411 h, first registration: 03/2004, suspension: other, Engine power 22 kW, diesel engine, year of manufacture 2004, only 411 operating hours. Hose, compressor hammer, air concrete vibrator. Net weight 760 kg, as-new condition. FOR US, CONDITION AND THE GENERAL FEEL ARE DECISIVE, THE PRICE COMES SECOND. For further questions, Mr. Faller will be happy to assist you at the following number. //*TRADE-IN, PART EXCHANGE OR PLEDGING OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* More offers available on our homepage: The description and stated data do not constitute a guarantee and are not binding. The purchase contract, which is concluded at the dealership upon purchase of the vehicle, is binding. Errors and prior sale excepted! Hedjxrpmujpfx Adbji

Condition: ready for operation (used), Year of construction: 2003, operating hours: 96,986 h, clamping force: 600 kN, screw diameter: 30 mm, This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mold installation height: 210 mm • Opening stroke: 400 mm Hodpfoyg Nfusx Adboi • Max. mold weight: 580 kg (moving side 380 kg / fixed side 200 kg) • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes • Core pull control: Yes (2 units, on the ejector side/AS) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm • Injection pressure: 1900 bar • Stroke volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D: 20 • Nozzle radius: 15 mm • Armored/wear-resistant injection unit: Yes • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 metric tons Additional equipment • Robot/removal device: W621-1381 • Travel paths: Y 1200 mm, X 550 mm, Z 1500 mm • Hot runner controller: 7-zone integrated control • Mold sensors: Kistler (p=1/t=0)

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 862-1053, Plastic Injection Moulding Machine | Mannesmann DEMAG - Ergotech 5000-2300 Clamping force [kN]: 5,000 Number of components: 1 Clamping platen width [mm]: 1,300 Clamping platen height [mm]: 1,200 Clear tie bar spacing, horizontal [mm]: 900 Hsdpfx Adeygikwjbsi Clear tie bar spacing, vertical [mm]: 800 Centering ring diameter [mm]: 200 Minimum mould installation height [mm]: 400 Maximum mould installation height [mm]: 880 Maximum opening stroke [mm]: 810 Maximum ejector stroke [mm]: 230 Thread [M]: 24 Maximum mould weight [kg]: 6,700 Maximum mould weight, moving side [kg]: 4,400 Screw diameter [mm]: EE1: 60 Maximum shot weight [g] PS: EE1: 800 Injection unit configuration: EE1: horizontal Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Loaded free on truck (Butzbach). #Tags: Mannesmann-DEMAG | Ergotec | Ergotech5000

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8040-0008, Plastic Injection Moulding Machine | Demag Ergotech - Systec 280/630-840 (2800-840) Clamping Force [kN]: 2,800 Number of components: 1 Clamping platen width [mm]: 950 Clamping platen height [mm]: 950 Clear tie bar distance horizontal [mm]: 630 Clear tie bar distance vertical [mm]: 630 Centering ring diameter [mm]: 160 Minimum mould height [mm]: 330 Maximum mould height [mm]: 710 Maximum daylight opening [mm]: 675 Maximum ejector stroke [mm]: 200 Thread [M]: 20 Maximum mould weight [kg]: 3,700 Hjdoygidwspfx Adbsi Maximum mould weight, moving platen [kg]: 2,500 Screw diameter [mm]: EE1: 45 Max. shot weight [g] PS: EE1: 320 Injection unit arrangement: EE1: horizontal Equipment: 2-core pull, 6-fold cascade, with robot Inspection possible at any time by prior arrangement. Free loaded on truck (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAGErgotech | Ergotec | Ergotech280

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 7169-2037, Plastic Injection Moulding Machine (fully electric) | Sumitomo SHI DEMAG - IntElect 100/470-340 (1000-340) Clamping force [kN]: 1,000 Number of components: 1 Clamping plate width [mm]: 620 Clamping plate height [mm]: 620 Horizontal tie bar spacing [mm]: 470 Vertical tie bar spacing [mm]: 420 Centering ring diameter [mm]: 125 Minimum mould installation height [mm]: 200 Maximum mould installation height [mm]: 430 Maximum opening stroke [mm]: 380 Maximum ejector stroke [mm]: 115 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight on moving platen [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 139 Hjdpfsygib Nex Adboi Aggregate configuration: EE1: horizontal Equipment: Packing station with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sumitomodemag | Intelect | 100-470-340

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 7363-0044, Plastic injection moulding machine | Sumitomo SHI DEMAG - Systec 100/420-310 (1000-310) Clamping force [kN]: 1,000 Number of injection units: 1 Clamping platen width [mm]: 600 Clamping platen height [mm]: 600 Tie bar spacing horizontal [mm]: 420 Tie bar spacing vertical [mm]: 420 Locating ring diameter [mm]: 125 Minimum mould height [mm]: 250 Maximum mould height [mm]: 500 Maximum daylight [mm]: 500 Maximum ejector stroke [mm]: 150 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 149 Aggregate configuration: EE1: horizontal Hodpfx Asygiafodbsi Equipment: 1 core pull, stacking station, with robot Inspection possible at any time by arrangement. Free loaded onto truck (Butzbach). #Tags: Sumitomodemag | Systec400 | 100-420-310

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: Hodpfeyfq Aljx Adbji • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system • Valve gate control: hydraulic (pneumatic not equipped)

Condition: excellent (used), mileage: 203,229 km, fuel type: diesel, color: yellow, first registration: 10/2003, Year of construction: 2003, operating hours: 24,503 h, Technical information Number of cylinders: 6 Measures Dimensions (LxW): 1027 x 255 cm Weights Empty weight: 47.900 kg Carrying capacity: 100 kg GVW: 48.000 kg Functional Mast length: 64 m CE mark: yes Condition Technical condition: very good Visual appearance: very good Hedpfx Adeydcn Rjbsi Financial information Price: On request Identification Registration number: BN-ZB-46 = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible.Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present.We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration.Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m.You can find us at:Middelingenseweg 22 5321 JH Hedel The NetherlandsAnd reach us at:Trucks: Passenger cars: Website: Email:

Condition: excellent (used), mileage: 203,229 km, fuel type: diesel, color: yellow, first registration: 10/2003, Year of construction: 2003, operating hours: 24,503 h, Technical information Number of cylinders: 6 Measures Dimensions (LxW): 1027 x 255 cm Hjdpfx Adoydb Susbji Weights Empty weight: 47.900 kg Carrying capacity: 100 kg GVW: 48.000 kg Functional Mast length: 64 m CE mark: yes Condition Technical condition: very good Visual appearance: very good Identification Registration number: BN-ZB-46 = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible.Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present.We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration.Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m.You can find us at:Middelingenseweg 22 5321 JH Hedel The NetherlandsAnd reach us at:Trucks: Passenger cars: Website: Email: