Used Gasket for sale (110)

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Csdpfezi Hchox Adhsrh Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 1 Guides: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Guides: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: used, Dear Sir or Madam, We offer for sale: Assembly line for inserting a gasket into a jerrycan cap Crodpfjzx D Imjx Adheh incl. 2 feeder belts (for jerrycan caps and gaskets) Assembly unit as well as carton feeding and finished product discharge conveyors

Condition: good (used), functionality: fully functional, mileage: 13,790 km, power: 90 kW (122.37 HP), overall weight: 6,950 kg, fuel type: diesel, axle configuration: 2 axles, fuel consumption (combined): 10 l/100km, Year of construction: 1979, operating hours: 1,500 h, 1600 operating hours / total mileage 13,800 km! Fuel consumption approx. 10 l/100 km diesel. Front loader: Schmidt FL4 with quick-change bucket and pallet forks. It has spent almost its entire Unimog life stored indoors. Never driven in winter. Absolutely no rust on the underside. Engine: OM 352, 6-cylinder, 5638 cc, 95 hp, economical – approx. 10 liters per 100 km, smooth-running with an authentic, sonorous sound. A true "one-off". This vehicle has accompanied all of my construction projects without any technical failures — now the work is finished. Selling as a collector’s item or for continued use. Includes workshop manual. I purchased the Unimog from the original owner, so I am only the second owner, for the past 14 years. First registered in November 1979. I have only driven it about 2,000 km. Transmission synchronizer rings should be replaced. Permitted gross vehicle weight (GVWR) = 6.95 t (can be driven with an "old Class 3 driver’s license"). This registration is completely tax-exempt! "Self-propelled working machine / excavator." Annual costs only about €250 for insurance plus MOT, no emissions test (ASU) required. The vehicle is currently registered and in use / operational with MOT, everything works! Due to the 43-year service life, especially soft parts and rubbers tend to become brittle and were replaced: Codozcmx Repfx Adhorh - Clutch master cylinder - Shift cylinder (small to large gear group) - 4/2-way valve - Cylinder head gasket The clutch housing is perfectly dry.

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Csdpez Ai Tpjfx Adherh Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: P9293, Machine for inserting gaskets into the frame profile for PVC window frames, manufactured by TECHNOROP. Csdjy U Uicspfx Adherh In good working condition. The machine is also equipped upstream with a tilting conveyor that allows the frame to be transferred from the previous machine and lifted vertically to be automatically positioned on the machine table. Manufacturer's documentation is included, including electrical diagrams, pneumatic diagrams, and the user manual.

Year of construction: 2006, condition: like new (used),

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 6,500 h, machine/vehicle number: S40-5934, load capacity: 227 kg, lifting height: 15,700 mm, fuel type: diesel, Equipment: all wheel drive, Genie S45 Telescopic Boom Lift Top maintained – extensive repairs – ready for immediate use For sale is a Genie S45 telescopic boom lift in very good technical condition. The boom lift has undergone extensive refurbishment and regular maintenance in the last two years. All invoices are available and can be viewed during inspection. Technical data • Manufacturer: Genie • Model: S45 • Year of manufacture: 2001 • Operating hours: approx. 6,500 h • Working height: 15.7 m • Platform height: 13.7 m • Lateral reach: 9.65 m • Load capacity: 227 kg • Drive: Diesel • Four-wheel drive • Serial number: S40-5934 Extensive investments: In 2023, the engine underwent extensive overhaul (invoice for €9,013 gross): • Engine completely serviced • Connecting rod and crankshaft bearings replaced Crodpfx Ajzrgmrodhsh • Piston rings replaced • Cylinder head gasket replaced • Starter replaced • Oil, air, and diesel filters replaced • V-belt replaced • Numerous other wear parts replaced In 2024, further extensive maintenance and hydraulic work was carried out (invoice for €5,254 gross): • Swing drive motor replaced • Hydraulic pump sealed • Hydraulic hoses replaced • Hydraulic oil replaced • Engine oil and all filters replaced • Machine completely lubricated • Functional test performed • Safety inspection performed Condition • Technically fully functional • Ready for immediate use • Normal age-related signs of wear • No known defects • Inspection and test operation possible at any time by appointment. In 2023 and 2024, over €14,000 was invested in the machine. As a result, the boom lift is in significantly better technical condition than many comparable machines of this year of manufacture. Price: €13,900 net negotiable (16,680 € gross) Location: Laakirchen (Upper Austria)

Condition: excellent (used), Year of construction: 2017, No. 1 rectangular filter station with a mechanical shaker cleaning system, operating under positive pressure, with the following dimensions: Width: 3,400 mm Length: 6,600 mm Height: 7,500 mm Filtering surface: 396 m2 Manufactured from galvanized steel sheet, complete with: - No. 160 polyester satin filter bags, 350 g/m², Ø250 × 3,000 mm, open at both ends; - No. 320 galvanized quick-release clamps, Ø250 mm; - No. 2 filter support frames; - No. 1 electric motor, 2.2 kW – 6 pole; - No. 1 external filter housing enclosure; Credpfsz Hz Htox Adheh - No. 1 access door to the filter compartment; - No. 1 vertical access ladder to the filter compartment; - No. 2 clean-air discharge stacks complete with air sampling connections; - No. 6 braced support legs; - No. 1 dust collection hopper complete with inspection hatch; - No. 1 screw conveyor, complete with 2.2 kW – 4-pole gear motor, steel shaft and flight, bearings, and supports; - No. 1 rotary airlock valve, complete with 1.5 kW – 4-pole gear motor, steel shaft, and rubber blades; - No. 1 high-level indicator; - No. 2 transparent PVC inspection windows; - No. 1 Ø200 mm tee connection complete with anti-clogging micron vent; - New galvanized bolts, nuts, and sealing gaskets for future reassembly.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, The Nordson FoamMelt 200 (FM 200) is a specialized dispensing system that mixes hot melt adhesives with an inert gas (such as nitrogen) to create a closed-cell foam. This process reduces adhesive consumption by as much as 50% to 65% while improving bond performance. Applications: Widely used for bonding, sealing, gluing, and gasket making (gasketing) in the automotive and packaging industries. Cedpfey N Ahcjx Adhorh Benefits of FoamMelt Technology Faster Curing: The foam cools down faster, enabling higher production speeds. Better Filling Properties: The volume increase due to gas makes it ideal for filling gaps. Improved Safety: The lower heat density of the foam reduces the risk of burns for operators.

Condition: used, mileage: 599,947 km, power: 213 kW (289.60 HP), first registration: 12/2013, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 07/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any warranty whatsoever, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typographical errors, and prior sale: MAN Lions City LE A78, 38+40+1 + 2 emergency seats (Vehicle 115) First registration: December 16, 2013 599,947 km Engine: 6,871 cc 213 kW / 289 hp Euro 5 EEV MOT until 10/2026, technical inspection until 07/2027 Permissible total weight: 19,500 kg, unladen weight: 11,285 kg, payload: 7,215 kg Overall length: 11,895 mm x overall width: 2,550 mm x overall height: 3,225 mm Double doors at the front and rear Driver's cab with door 38+2 emergency seats + 40+1 Fold-out ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microwave Cjdpfx Adez Iihuehjrh 2 x electric mirrors + mirror heating 12-volt socket Emergency exit Stop brake Driver's seat ISRI with heating and ventilation Lawo system connected to the cash register Tires: 275/70R22.5, front approx. 60%, rear approx. 80/80% Various signs of wear and tear, consistent with the age Good overall condition Last inspection at 565,195 km on April 23, 2025, next inspection at 625,195 km January 20, 2025: Air reservoir replaced. October 2, 2025: Head gasket + valve cover gasket + engine mount on the passenger side rear replaced. January 28, 2026: Brake pads on the front axle replaced, brake caliper on the front axle, driver's side, replaced. Price: €12,000.00 (net) All information is provided without any warranty whatsoever. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Year of construction: 2025, condition: new, I offer high-quality silicone seals designed for use in the refrigeration, food processing, and catering industries. Our gaskets are manufactured using CNC turning or extrusion methods, ensuring perfect precision and dimensional repeatability. 🔧 Applications: - Refrigeration chambers and cabinets, freezers, refrigerated counters, and display cases - Doors and lids of refrigeration equipment - Refrigeration units and industrial cooling systems Credpfexpfx Isx Adhoh ✅ Key advantages: - Resistant to low and high temperatures (from –60°C to +200°C) - Safe for food contact (FDA certified) - Excellent flexibility and sealing performance even after repeated opening - Resistant to moisture, oils, detergents, and ozone - Custom shapes and sizes available – also based on a sample or technical drawing ⚙️ Materials and colors: - Transparent, white, grey, red, and blue silicone - Hardness from 40 to 80 ShA - Standard and food-grade versions (FDA, EU 1935/2004) 🚚 Why choose us? - Fast lead times – as quick as 1 business day - Both single units and larger series available - Professional advice and assistance in selecting the right gasket profile - Shipping available throughout Poland and Europe 📞 Call or write – we will advise, select, and manufacture for you! Don’t waste time with ill-fitting gaskets – order a solution perfectly tailored to your refrigeration equipment. 📍 Shipping or personal collection. 📦 VAT invoice, quality guarantee. The indicated price refers to the quotation for the production of custom seals.

Condition: used, Year of construction: 1993, operating hours: 9,924 h, load capacity: 2,500 kg, lifting height: 3,800 mm, fuel type: gas, gearing type: automatic, Equipment: head guard, * STILL R 70-25 * Year of manufacture: 1993 * VW 1.6 engine * Cylinder head gasket defective Crodpfx Adjzdwtyshjh

Condition: used, mileage: 950,838 km, power: 210 kW (285.52 HP), first registration: 12/2007, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 12/2026, emission class: euro5, color: white, brakes: retarder, Year of construction: 2007, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to availability until completion of the sale, errors, typos, and prior sale: Mercedes Benz Citaro (emergency seats) (Vehicle 123) First registration: December 28, 2007 950,838 km Engine: 6,374 cc 210 kW / 286 hp Bluetec 5 Next inspection: 09/2026, TÜV (technical inspection): 12/2026 Permissible total weight: 19,000 kg, unladen weight: 10,880 kg, payload: 8,120 kg Tires: 275/70R22.5, front approx. 80/60%, rear approx. 40/40% Overall length: 12,000 mm x overall width: 2,550 mm x overall height: 3,100 mm Double doors at the front and rear Driver's cabin with door Ramp Fully automatic transmission Microwave Electric windows Csdpfx Adoz H Edcoherh 2 x electric + heated mirrors Auxiliary heater + 2nd heater Retarder Stop brake LAWO Mobitec ICU 400 38 + 2 emergency seats + 60 standing places + 1 KIWA seat Emergency exit 12-volt socket Wheel arches are rusty June 28, 2024: Oil pan gasket replaced, compressor hose replaced; July 1, 2024: Valves on the transmission replaced; December 3, 2024: Pressure regulator of the air system replaced; December 18, 2025: Door flange sealed Last inspection on September 17, 2025 at 924,499 km, next inspection at 984,499 km Various signs of wear and tear, commensurate with age Price: 3,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the Ludwigslust District Court for disputes up to a value of €10,000, and the Schwerin Regional Court for disputes exceeding this value. Subject to errors, typos, and prior sale.

Condition: used, mileage: 645,478 km, power: 220 kW (299.12 HP), first registration: 04/2009, fuel type: diesel, number of seats: 49, gearing type: automatic, next inspection (TÜV): 01/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to final sale, errors, typos, and prior sale: Mercedes Benz Citaro O530 LE 13m (49+51+1) (Vehicle 129) First registered: 04/02/2009 645,478 km Engine: 11,967 ccm 220 kW / 300 hp Bluetec 5 EEV MOT valid until 10/2026, TÜV (technical inspection) valid until 01/2027 Permissible gross vehicle weight 19,000 kg, unladen weight 11,590 kg, payload 7,410 kg Overall length 13,570 mm x overall width 2,550 mm x overall height 3,400 mm Tires 275/70R22.5 all around, approximately 80% remaining Double doors at the front and rear Driver's cab with door Ramp Fully automatic transmission Microphone Retarder Electric windows 2 x electric + heated mirrors Auxiliary heater + 2nd heater Stop brake 49+51+1 seating arrangement Emergency exit 12-volt socket LAWO MOBITC 400 Frame members with some corrosion 01/10/2024: Rear axle left wheel hub sealed, front axle left brake caliper replaced. 04/05/2024: Front axle left upper control arm + bearing replaced. 10/22/2024: Water filter replaced. 01/22/2025: Front axle right brake caliper replaced, relay valve in front of the rear axle left replaced. 02/28/2025: Compressor head replaced, oil pan gasket replaced, pressure regulator replaced. 11/27/2025: 4-circuit protective valve replaced. Various signs of wear and tear, consistent with the age of the vehicle. Last inspection at 642,493 km on 04/21/2026, next inspection at 702,493 km. Credpfx Ajz E Aa Sjdhsh Price: 5,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties, for disputes up to a value of €10,000, is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: used, This listing is for the J Engelsmann Jolting Volumeter STAV 11 The unit is in full working condition and is ready for immediate use Engelsmann Jolting Volumeter STAV 11) — a compact laboratory instrument used to assess the tamped density and volumes of bulk solids before and after compaction. The Jolting Volumeter STAV II, produced by J. Engelsmann AG, is a laboratory device engineered to measure the apparent (pre-compaction) and tapped (post-compaction) volumes of bulk materials—such as powders, granulates, and fibrous products—thus enabling calculation of tamped or tapped density Compliance with standards: Supports analysis in line with European Pharmacopoeia, DIN ISO 787 Part 11, ISO 3953, ISO 8967, and ASTM B 527-93 Crodpfx Aexhd E Rsdhoh Adjustable tamping mechanism: Allows custom setting of the number of jolting strokes deviating from default programs Measurement cylinders: Compatible with a range from 10 ml to 1000 ml, with 250 ml typically standard; cylinders are interchangeable and secured via a strong retaining ring and gasket Ease of use and cleaning: Designed with a modern, rounded “soft design” that’s easy to clean and operate via a user-friendly display and control unit Optional accessories: Can be fitted with a sound-absorption hood for quieter operation

Condition: used, This listing is for the J Engelsmann Jolting Volumeter STAV 11 with an Acoustic Hood The unit is in full working condition and is ready for immediate use Engelsmann Jolting Volumeter STAV 11) — a compact laboratory instrument used to assess the tamped density and volumes of bulk solids before and after compaction. The Jolting Volumeter STAV II, produced by J. Engelsmann AG, is a laboratory device engineered to measure the apparent (pre-compaction) and tapped (post-compaction) volumes of bulk materials—such as powders, granulates, and fibrous products—thus enabling calculation of tamped or tapped density Compliance with standards: Supports analysis in line with European Pharmacopoeia, DIN ISO 787 Part 11, ISO 3953, ISO 8967, and ASTM B 527-93 Adjustable tamping mechanism: Allows custom setting of the number of jolting strokes deviating from default programs Measurement cylinders: Compatible with a range from 10 ml to 1000 ml, with 250 ml typically standard; cylinders are interchangeable and secured via a strong retaining ring and gasket Crjdpfxexhdynj Adhoh Ease of use and cleaning: Designed with a modern, rounded “soft design” that’s easy to clean and operate via a user-friendly display and control unit Optional accessories: Can be fitted with a sound-absorption hood for quieter operation

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0385, The “OSV S400G” mixing and casting machine for PUR foam gaskets. Designed for manufacturing of injection molding products from two-component polyurethane systems with their application along a given trajectory, for example electrical cabinets doors. Crsdpfxeyzhbre Adheh

Year of construction: 2021, condition: used, Alfa Laval T10 Plate Heat Exchanger Industrial Alfa Laval gasketed plate heat exchanger, suitable for efficient heat transfer in industrial process applications. The unit consists of a plate pack mounted in a heavy-duty Alfa Laval frame with inlet and outlet connections. Product details: Csdsz Dix Ejpfx Adherh Manufacturer: Alfa Laval Type: T10 Equipment: Gasketed plate heat exchanger Quantity available: 2 units Heavy-duty steel frame Removable plate pack Multiple process connections Industrial configuration Condition: Used industrial surplus Both heat exchangers are available individually or together. The units are currently installed and can be inspected prior to purchase. Location: The Netherlands This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for additional information, dimensions, or to make an offer.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, 1.1 General Features Extruder Type - Horizontal Screw Diameter (D) - 30 mm Screw Length (L/D) - 25 net (L: Effective length as specified according to Euromap-20 standards) Raw Material - PVC-W (soft) / PE / PP / TPE / TPV (in granule form) Application - Gasket profile Capacity - 12-18 kg/h (Capacity may vary depending on the characteristics of the raw material) Extruder Zone - 5 = 3 + 2 (3 on the barrel, 2 for die-head control) Extruder Main Motor and Driver - 4 kW (Yılmaz Gearbox) / 4 kW Siemens/ABB AC Driver Extruder Control - Extruder Height - 900-1200 (adjustable) mm (Can be changed according to customer’s request) Die-Head Connection - Flange connection Extruder Colour - RAL 7043–RAL 7047–RAL 3020 (Extruder colour can be changed according to client’s request) Die-Head Unit - Not included Pressure and Temperature Sensor - Not included Electrical Panel - 380-400V / 50-60 Hz Languages - English 1.2 Technical Details Barrel - Barrel Dimension: Ø30/25D - Barrel Zone Number: 3 - Cooling System: Air - Heating System: Ceramic resistance - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The barrel is made of 1.8550 (DIN 12891) nitriding steel and long-term gas nitrided to 66-70 HRc with a hardness depth of 0.5 - 0.7 mm. - A flange connection will be used between the extruder and the die head. Screw - Screw Dimension: Ø30/25D - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The screw material is made of DIN 1.2891 (1.8550, 34 CrAlNi 7) nitriding steel and long-term gas nitrided to 66-70 HRc hardness at a depth of 0.6-0.7 mm. - The screw will be manufactured in an EBM Barrier design for good homogeneity. Heating System - Heating is provided by ceramic insulated band heaters, certified according to CE and ISO 9001:2008. - There are 3 heating zones on the barrel. Cooling System - Cooling is provided by centrifugal blowers from TUV-certified EBMpapst, Germany. - There are 3 air cooling zones on the barrel. Reducer Gearbox - A TUV-certified YILMAZ brand, 4 kW DRE series horizontal helical reduction gearbox will be used. Cjdezarn Espfx Adhjrh - The motor has an additional cooler for protection against higher loads. - The motor speed will be controlled via an ABB ACS-880 brand 15 kW inverter drive. Electric Control Cabinet - The electric control cabinet is equipped with ISO 9001:2008-certified equipment. - There will be one main electrical panel. The control panel will be located on the extruder. - The extruder is controlled by the main electrical panel. - This includes speed control of the drive and zone temperatures, which will be controlled by this PLC system. - A 7” touch screen will be used on the extruder (master unit). Thanks to this panel, two extruders can be fully controlled. - The extruder’s screw speed can be adjusted steplessly by means of a 4 kW Siemens / ABB AC frequency motor driver. The following information can be accessed via the touch screen: ● Extruder screw speed, ● Zone temperature set points, ● Actual values, ● Extruder motor current, - more details available

Condition: ready for operation (used), Year of construction: 2003, functionality: limited functionality, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhein, table length: 1,600 mm, table width: 1,000 mm, controller model: Heidenhein iTNC 530, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, rotational speed (max.): 7,500 rpm, rotational speed (min.): 7,500 rpm, spindle speed (min.): 7,500 rpm, We offer this used TYC FVP 50 CNC machining center, year of construction 2003. One small need for repairment - gasket seal, otherwise completed and ready for use. Crodpfx Asyfh Npodhjh If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, mileage: 828,776 km, power: 324 kW (440.52 HP), first registration: 03/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2027, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, MAN TGX 18.440 4x2 BLS-EL | XLX | Retarder | Auxiliary Air Conditioning VIN: 705265 MAN invoice dated 04/2026 for €6,300 net is available. The following were renewed, among other things: main bearings/connecting rod bearing shells of the crankshaft, all connecting rod bearings, intercooler, cylinder head cover gasket, engine oil filter, oil pan gasket, and various seals/O-rings. In addition, the engine oil was changed, valve clearance adjusted, engine diagnostics and functional testing were performed. CHASSIS / COMPONENTS * 4x2 * Leaf/air suspension * Wheelbase: 3,600 mm * ABS * 2-line air connection * ABS connection * 15-pin electrical connection Csdpfxozirpae Adhjrh * Aluminum rims * Full spoiler ENGINE / TRANSMISSION * 324 kW (440 hp) * 12,419 cm³ displacement * Euro VI A * Automatic transmission * Retarder * Differential lock CAB / DRIVER'S CAB * XLX cab * Automatic climate control * Auxiliary heater * Auxiliary air conditioning * Navigation * CD radio * Hands-free system * CB radio * Distance cruise control * Lane departure warning system * Collision warning / Emergency braking assistant * Refrigerator * 2 bunks TIRES * Axle 1: 315/70 R22.5, remaining tread approximately 30% / 30% * Axle 2: 315/70 R22.5, remaining tread approximately 70% / 70% WEIGHTS * Permissible total weight: 18,000 kg * Technically permissible total weight: 20,500 kg * Unladen weight: 7,550 kg * Payload: 10,450 kg OTHER * German vehicle * MOT (TÜV): 06/2027 * Inspection (AU): 12/2026 New MOT/inspection and weight adjustments are possible upon request. We will also not leave you alone after the purchase: we will help you obtain export or short-term license plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we will be happy to assist you! We speak German, English and Russian. All information is subject to change without notice. Errors, omissions, printing and spelling errors and prior sale are reserved. About us Leible Nutzfahrzeuge is a family-run company based in Kehl on the Rhine. For many years, we have stood for experience, reliability and competence in the field of refurbishment and sales of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a variety of purposes. We don't just focus on the vehicle, but also on the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That is why we support you personally and reliably - from the first contact to the handover of your vehicle. Convince yourself. We look forward to your inquiry! Our services for you Vehicle loading We will help you load your purchased vehicles. Special transports We will support you in the organization of special transports. Export and short-term license plates We will help you obtain export or short-term license plates. Customs formalities We will also assist you with customs matters. Vehicle transport On request, we will arrange for the transport of your vehicle within Germany.

Condition: excellent (used), Year of construction: 2015, working width: 3,000 mm, total height: 1,000 mm, cutting height (max.): 10 mm, The ATOM FlashCut EASY 888 L30 plotter is an advanced digital knife cutting machine designed for precise and rapid cutting of a wide range of materials, including leather, textiles, foams, and plastics. It is especially valued in the footwear, leather goods, and technical gasket/component manufacturing industries. ⸻ 📐 Technical Specifications • Working area: 3000 × 1000 mm Crodpfx Adsy D Sa Dohsh • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg ⸻ ⚙️ Key Features • Versatility: The plotter enables cutting of various materials, from soft leathers to rigid plastics. • Ergonomics: Its compact and ergonomic design ensures ease of operation and space savings in the production facility. • Vacuum system: The dual-zone vacuum system ensures stable material hold during the cutting process. • Cutting head: Supports various tools, including oscillating knives and crease tools, enhancing production flexibility. ⸻ 🏭 Industrial Applications The ATOM FlashCut EASY 888 L30 plotter is used in: • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries • Packaging and advertising materials production ⸻ 🛠️ Additional Information The L30 model is particularly recommended for companies seeking a solution that combines high cutting precision with production efficiency. With the ability to process large material formats and support multiple cutting tools, this plotter is suitable for both serial manufacturing and individual project tasks.

Condition: used, Year of construction: 2009, The *Alfa Laval M10-MBASE* is a compact and highly efficient plate heat exchanger, designed for demanding applications in the beverage and food industry, chemical processing, and general heating and cooling duties. *Technical Specifications* *Type:* M10-MBASE *Heat transfer area:* 2.6 m² *Plate material:* Stainless steel Alloy 316, thickness 0.50 mm *Gasket material:* NBRFF Clip-On (Nitrile rubber) *Plate pack thickness:* 63 mm *Total weight:* 232 kg *Total volume:* 13 liters *Dimensions:* Height 672 mm, width 618 mm, depth 530 mm *Connection standard:* DIN NW100 *Bolts:* M20 *Expandable:* up to 17 additional plates *Operating Data* *Design pressure:* 10 bar *Test pressure:* 14.3 bar *Design temperature:* up to 120 °C *Minimum temperature:* 0 °C *Typical flow examples (according to datasheet):* Wine: 2,000 L/h (heating 12 → 17 °C, Δp = 47 kPa) Hot water: 2,000 L/h (cooling 30 → 24 °C, Δp = 22 kPa) Fruit juice: 240 L/h (heating 21 → 75 °C with 90 °C hot water, Δp ≈ 40–50 kPa) *Design Features* Crsdpsz Iavpjfx Adhsh *Plates with parallel flow channels* ensure high efficiency and low pressure drop. *Clip-on gaskets* for easy maintenance and cleaning. *Robust frame and pressure plate construction* with M20 tightening bolts (length 360 mm). *Flexible capacity expansion*, up to 17 additional plates can be installed. *User-friendly assembly* with clear A/B plate markings. *Typical Applications* Beverage pasteurization (e.g., wine, juice, beer) Hot water and cooling water circuits CIP cleaning systems General process heat transfer in industrial applications

Condition: good (used), Year of construction: 2008, sheet thickness (max.): 13 mm, cutting length (max.): 4,160 mm, DENER Hydraulic Shear 4100x13mm DMMH.4113 Brand: Dener Model: DMMH NC 4113 Year: 2008 Standard Control: Dener HT 071 Cutting Length: 4,160 mm Maximum Cutting Thickness: 13 mm Cutting Inclination: 2º Number of Hold-Downs: 19 Motor Power: 30 kW Cuts/min.: 8 Manual Lubricator *Shear under inspection. Blades have been removed for grinding. Hold-downs have been removed for replacing seals and gaskets. Csdpfx Adowi Snxshjrh Delivered fully inspected and with a 6-month warranty.

Condition: used, mileage: 297,679 km, power: 75 kW (101.97 HP), first registration: 08/1998, fuel type: diesel, overall weight: 2,700 kg, color: silver, gearing type: mechanical, emission class: euro3, number of seats: 8, Equipment: air conditioning, airbag, central locking, navigation system, power assisted steering, sliding door, 4205 VW T4 Caravelle TDI Year of manufacture: 8/1998, 102 hp, 2.5 liters, 297,700 km Purchase price: €14,800 Equipment: Bluetooth hands-free system, Bosch navigation system Front and rear armrests, Cedpfx Adjzd A Nyjhorh Sliding windows, Leather steering wheel, Tinted windows, painted bumpers and mirror caps, 2 airbags 2-zone automatic climate control, roof-mounted air conditioning Mirrors and windows electrically adjustable Central locking with remote key, Cup holders, Power steering, Heated rear window with wiper, Complete service history Cylinder head gasket, complete timing belt kit, complete engine gasket kit, clutch kit with release bearing, shift bushings, glow plugs, suspension joints, transverse link, stabilizer bearing, Oil change service with oil filter, air filter, cabin filter, fuel filter, new rear heater core Total weight: 2700 kg, towing capacity: 2000 kg The vehicle is in excellent technical and optical condition. The vehicles for sale are inspected and repaired in our certified automotive workshop. Non-smoking vehicle We are happy to consider your requests and can carry out various retrofitting work in our workshop: Tow hitch from €800 6-month Auto Helle warranty according to the warranty certificate. Bank financing possible Subject to changes and errors.