Used Deep Hole Drill for sale (8,380)

Condition: good (used), Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Mount-on holder: Tool holder -Recording: MK5 -Length: 300 mm -Dimensions: see photos -Dimensions: 300/50/H45 mm Dodpfeuhr Swsx Acxeup -Weight: 2.3 kg

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 40 mm throat 300 mm bore stroke 150 mm thread capacity 30 M spindle taper MT 4 MK Duodpfswp Tp Djx Acxop column diameter 125 mm bore spindle turning speed range 132-1852 U/min table-size 480x480 mm

Condition: used, bore capacity in steel (diameter) 20 mm throat 322,5 mm bore stroke 160 mm bore capacity in cast iron 23 mm feed 1-3000 mm/min tool taper SK 30 spindle speed: 55-5000 U/min table surface area ca. 614 x 370 mm column diameter 145 mm machine weight ab. 550 kg with multi-spindle boring head ARBO 20 Automatic turret drilling head with 6 machining stations TYPE ARBO 20 6 work spindles of your choice incl. spindle guard, flange quill, extended column, special software, without protective cover on the machine table Dodoyrhynepfx Acxjup manual included (machine and turret drilling head) machine is in a good condition, liitle used. Preowner is a public institution Standard Equipment Machine table adjustment and clamping at the rear of the machine Full motor protection with PTC thermistors for protection against thermal overload - with insulation class F (155°C) Infinitely variable speed control Protection class IP 54, control voltage 24 V Mushroom-shaped pushbutton (latching) for emergency stop on the control panel Main switch (lockable) Technology computer for cutting data determination and machining cycles Drilling depth programming with automatic rapid traverse forward/reverse Precision synchronous tapping without compensating chuck, max. 10 threads/min (spindle speed dependent) Special software for freely programming machining cycles according to DIN/ISO standards Drilling depth input via numeric keypad Zero point adjustment via external handheld control unit Operating hour counter for spindle, feed rate, and piece count

Condition: good (used), Universal screwdriver, construction screwdriver, screwdriver, electronics screwdriver, hand drill Dusdpfxsfc Hfyo Acxop -Nominal input: 740 watts -Max. drill bit: Ø 13 mm -Connection: 220 volts Quantity: 1 available -Dimensions: 450/210/H80 mm -Weight: 4.3 kg/piece

Condition: used, total width: 1,000 mm, total length: 2,400 mm, total height: 2,700 mm, Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Control: Conventional - Motor power: 7.0kW - Drilling depth: 130mm - Spindle speed max.: 2500rpm - Model: iaalboormachine - Tool holder: MK4 - Table width: 750mm - Table length: 1400mm - Drilling capacity: 50mm - Travel X: 950mm - Travel Y: 900mm - Spindle diameter: 70mm - Max. reach: 950mm - Spindle speed min.: 28rpm - Transport dimensions: 2400mm x 1000mm x 2700mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 2 Duodpfx Acownnbloxep Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1976, arm length 1450 mm Dedpfjyn R N Djx Acxeup taper MK 4 Cube ja weight of the machine ca. 3 t

Year of construction: 2005, condition: ready for operation (used), travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, overall weight: 910 kg, number of axes: 3, This 3-axis AGIE Drill was manufactured in 2005. It features worktable dimensions of 300 × 400 mm and travel capabilities of 300 × 200 × 300 mm. The machine is CNC controlled and has a power rating of 4 kVA. If you are looking to get high-quality drilling capabilities, consider the AGIE Drill drilling machine we have for sale. Contact us for further details. • Worktable dimensions: 300 × 400 mm • Voltage: 400 V • Frequency: 50/60 Hz • Power: 4 kVA • Full load current: 5.7 A Dujdpfx Aceyly Hgexjp • Control: CNC controlled

Condition: ready for operation (used), Year of construction: 2003, bore capacity in steel (diameter) 40.0 mm threading M 24 in St 60 throat 293 mm bore stroke 140 mm morse taper 3 Kurzspindel MK table: 514 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm throat 293 mm distance spindle /table min 117 / max 701 mm T-slots 2 x 14 x 224 feed 0.1 + 0.2 mm/U total power requirement 1.45 / 1.90 kW weight 370 kg dimensions of the machine ca. 1200 x 800 x 1840 mm current new price ~ 12.500 euros special price on request Equipment: - robust column drill - V-belt - - infinitely variable speed adjustment - analog speed system - automatic spindle feed - thread cutting device - pole-changing drive motor - height-adjustable work table - machined base plate - feed overload protection Duodoynbfpepfx Acxjp - Main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection - Operating instructions in German * Special equipment included : - Thread cutting device * with foot switch, for thread cutting with stop - Machine light - Coolant device in the machine base

Year of construction: 1999, condition: ready for operation (used), machine/vehicle number: 9920268, GEISS DU2000 T7 Vacuum Thermoforming Machine • 1999 • 2000 × 1000 mm • Halogen Heaters • Sinumerik Control Dsdpox Uz Ncefx Acxsup Industrial vacuum thermoformer with large 2000 × 1000 mm sheet capacity and deep draw capability up to ~650 mm. Equipped with high-speed halogen flash heaters, Sinumerik heater control, three vacuum pumps, plug assist, auto sheet loader, and motorized window plates for rapid tool changes. Excellent for high-volume thermoformed parts production.

Condition: like new (used), functionality: fully functional, 5 pcs drill rod adapters SANDVIK Model: T51 HL1000PE D52 L840 Part no.: 7306-6019-02 Dusdpoyr Iqgefx Acxsp Total length: 840 mm Suitable for drilling rigs with long extractor (52 mm bearing diameter)

Condition: ready for operation (used), Professional, heavy-duty version by HANG (German quality) in neat, complete condition. Highly suitable for binderies, printing shops, and print departments. ⸻ Specifications • Brand / Model: HANG 107-30 electronic • Serial number: 102553 • Year of manufacture: 2002 • Number of drilling heads: 4 pieces, individually adjustable • Electronic control, automatic drilling cycle • Power connection: 400V – 50Hz – 6A • CE certification present • Cast iron frame, extremely robust construction • Manual and automatic operation • Adjustable stops with fine adjustment • Machine is mounted on swivel casters (easily movable) ⸻ Condition • Removed from production in working order • Drill spindles and guides run smoothly • No damages, normal signs of use • Immediately ready for operation • Complete, as shown in the photos ⸻ Description The HANG 107-30 is one of the most robust paper drilling machines on the market. Heavier-duty and more professional version than the standard models, thanks to the sturdy drilling heads, automatic drilling cycle, and reliable electronic control system. Perfect for calendar production, book blocks, brochures, index tabs, and more. ⸻ Price 👉 € 3,250 net (0% VAT export possible) Duedpjx A Izlofx Acxop

Condition: used, URANIA DSK Maximum paper size: 80 × 112 cm Minimum paper size: 30 × 42 cm Duodpfxew R Eqbo Acxsp • Frame opening (normal): 78.5 × 108.5

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev Duodpfx Acen N Ekcexep - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive Duodoharwvspfx Acxop - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Dedsghtvaopfx Acxsup Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm - Swiveling, rotating, and tilting angle table - Coolant pump in machine base - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Weight 690 kg In good condition

Condition: excellent (used), 2-hole flange bearing -Type: 01CJT05 -Designation/Type: Flange bearing unit -d = Inside: 25 Price: per piece -Number: 71x available -Weight: 0.6 kg/piece Dsdpfx Acsb A S Hmoxjup

Condition: ready for operation (used), Year of construction: 1977, Asquith ODI Mk2 14/54 5MT Radial Arm Drilling Machine Spindle centre to column centre max. 54" Spindle travel 14″ Spindle taper 5 MT Spindle speeds (16) 40-2040rpm, Spindle motor 5.5 HP Spindle emergency brake Power elevation of arm Power locking to arm and head Box Table Coolant 415V Electrics 1977 For sale with Jet Machinery Ltd Jet Machinery Stock No: #79026 Machine Serial Number: P.33677 Cost: £6,950.00 + VAT Duedjyg Skajpfx Acxep Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2026, - Infinitely variable speed control - Quick-adjustable drilling depth stop - Thread cutting device - Undervoltage release - Table height adjustment via rack and pinion - LED head lighting - Continuous/standard drilling capacity 20/23 mm - Thread cutting capacity max. M 12x1 - Spindle MK II - Drilling depth 100 mm - Throat depth 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm Dsdpjd Nk S Isfx Acxoup - T-slot size (arm): 2 slots, spacing 125 mm - Digital speed display - Digital drilling depth display - Quick-adjustable drilling depth stop - Manual feed - Motor: 3-phase 400 V - Spindle speeds stepless 30 - 3,000 rpm Option Drill Package 3 consisting of: - Machine vice [felix] 2.0 100 mm - Quick-release drill chuck 3-16 mm (accuracy 0.17 mm) - Morse taper arbor MK 2 B18 and reduction sleeve MK 2 to MK 1 €485.00 Option: Coolant system: €605.00 FACTORY WARRANTY: 3 years DELIVERY: Free to your door, including packaging NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU THE ENTIRE FLOTT PRODUCT RANGE! PLEASE ASK US FOR AN OFFER!

Condition: used, 1 used column-type drilling machine Brand: Alzmetall Model: AB 3 ESV Drilling capacity: Ø 32 mm 3 automatic feed rates Spindle taper: MK 3 Dedpoyqr Dhjfx Acxeup Distance spindle nose - table: 545 mm Throat: 290 mm Quill travel: 160 mm Column diameter: Ø 220 mm Dimensions: 1150 x 650 x 2000 mm Weight: 850 kg

Condition: ready for operation (used), Year of construction: 2025, number of axes: 3, Main Drive Number of axis 3 This 3-axis QUICK CNC KQ-63E was manufactured in 2025. It's a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information. Duedpfx Acsx D Dnksxjp Application Types Boring & Drilling (Wood)

Condition: ready for operation (used), Year of construction: 2025, This QUICK CNC KQ-62 Lite multi-spindle drilling machine was manufactured in 2025. It handles workpieces from 70 to 2400 mm in length, 9 to 60 mm in thickness, and 30 to 1220 mm in width. Features include a Higerman control system, dual 3.5 kW milling spindles at 18000 rpm, and comprehensive drilling units. Consider the opportunity to buy this QUICK CNC KQ-62 Lite multi-spindle drilling machine. Contact us for more information. Dsdox S Sizjpfx Acxjup Application Types Boring & Drilling (Wood)

Condition: excellent (used), Column drilling machine GILLARDON GB 30 Djdsyq Nvzopfx Acxjup

Condition: used, Year of construction: 1975, drilling capacity steel/cast iron 23,30 mm throat 300 mm bore stroke 140 mm spindle taper MT MK 3 spindle turning speed range 208- 2000 U/min table travel 400 mm weight of the machine ca. 275 kg table-size 415 x 300 mm Dusdpfx Asymp Snocxsp distance work spindle /surface of the table 450 mm voltage 400 V connected load 0,9/1,4 kW

Condition: used, bore capacity in steel (diameter) 40 mm arm length 1600 mm bore capacity in cast iron 60 mm spindle diameter 85 mm tool taper MK 5 speeds 24 - 1050 U/min feeds 0,06 - 1,0 mm/U column diameter 345 mm vertical adjustment of the arm 900 mm thread cutting attachment ja Boring motor 5,5 kw total power requirement 7,5 kW weight of the machine ca. 4000 kg dimensions of the machine ca. 2,5 x 1,0 x 2,99 m Radial drilling machine Dedpfxsyrtxvj Acxoup - Mounting cube 750 x 500 x 500 mm - Digital display for boom travel - Coolant system - Good condition

Condition: excellent (used), Working width ca. 2.600 mm Dedpfx Acoyrt Abjxoup Working height ca. 1.450 mm Number of cylinders 6 St. down holder 3 St. Stable hydraulic hole press, hole plate press, or gluing press for gluing or fixing workpieces such as frames, panels, windows, or doors.