Used Deep Hole Drill for sale (9,605)

Condition: good (used), Year of construction: 1995, Pot hole boring machine Grass ECO Press Year of manufacture 1995 S/N 9502665 in good condition right and left linear guide (work table can be supplied ) weight approx. 45 kg Ijdpfx Agsk D T Ncs Uoal 380 V - 50 Hz - 2,5 A pneumatic connection - max 6 bar CE marked

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control Ijdpfsrtrx Rox Ag Ueal (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: new, This is a new machine which is manufactured in Romania by the manufacturer Emsil. Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office. Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings. The machine is also equipped with a milling and boring bar which can handle exceptional power and torque. The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings. The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically Rotary Turntable: The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones. There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system. CNC Axes Control: The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc. The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc. Iedpfx Ageu Id H As Ueal You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm *

Condition: good (used), Reamer, twist drill, drill bit -Manufacturer: Holex, WMW, Gühring / Ilix, twist drills 37 pieces Ø 14.5 - 31.5 mm -Type: Two-cutter, holders MK1, MK2, MK3 -Size: 1x Ø 14.5 - 31.5 mm each, increasing by 0.5 mm -Price/Delivery: complete -on request: different sizes/quantities available from further stock -Transport dimensions: 420/350/H170 mm Iaodpfx Agjw Hygwj Uel -Weight: 16.3 kg

Condition: used, Tube End Forming Machine, T-Drill SP-110, Used Machine Manufacturer: T-Drill Model: SP-110 Operation: Uncertain Overall Dimensions: Isdexu E Duspfx Ag Usal Width: 930 mm Depth: 1520 mm Height: 1460 mm Weight: 600 kg Year of Manufacture: 2016 Air Pressure: 6 bar Electrical Data: 480V; 18.5 kW; 3x80A The T-DRILL SP-110 is a fully automatic tube end spinning machine capable of closing, reducing, and expanding primarily copper and brass tubes — typical applications include HVAC, refrigeration, and mechanical fittings. Technical Data (Summary): Tube diameter range: Ø 8 – 108 mm (≈ 5/16” – 4-1/8” O.D.) – T-Drill Oy Maximum reduction: 70% – T-Drill Oy Materials: primarily copper and brass (as highlighted in the manufacturer’s description) – T-Drill Oy Wall thickness / maximum wall thickness (according to used machine listings): e.g., one listing indicates 0.125" (≈3.2 mm) maximum wall thickness (depends on model/configuration) – Southern Fab Sales Machine features: automatic clamping, rotation + forming tools (tooling/dies), suitable for forming long or complex tube ends. Capable of closing, flattening, reducing, and expanding tube end geometries; the manufacturer’s brochure contains detailed shapes and examples. Especially suitable for HVAC and industrial refrigeration tubes.

Condition: reconditioned (used), Year of construction: 2002, drill gomad WU 3G 2002 YEAR LIGNUM WU drills Drill WU 3G 3 TOP UNITS Flexible task drills with adjustable spacing of top, side, bottom and swivel drilling units equipped with multi-spindle drilling heads. Designed for drilling all kinds of holes. The modular structure provides many configuration options (working length, number of units, pneumatic clamps, etc.). They enable single- and multi-stage drilling and programming the operation of units depending on the needs. Feeding and receiving of the processed material is done manually. Other drilling functions are performed automatically (material pressure, simultaneous 3-sided drilling, pressure release). Spindle spacing scale according to the order 16 - 44 mm Distance between JC head units 250 - 2500mm Width of JG, JB, JC, JS units 160mm Unit feed cylinder stroke Iedpfxoi Hqhfe Ag Ueal JG - 100mm, JB 100 (120mm) Maximum material width 200mm Maximum material thickness 50mm Maximum drilling diameter 35mm Spindle speed 3000rpm JB units spindle center height above table 6 - 35mm (55mm) Drilling unit engine power 1.1 kW Duration of one-stage and two-stage cycle 4 - 6 sec and 6 - 10 sec Air pressure required 0.4 - 0.6 MPa Compressed air demand 2 m3/h per drilling unit Type of feed drive pneumatic with stepless speed regulation Supply voltage 400V, 50Hz Overall dimensions (L x W x H) 2200 - 4000 x 1500 x 2000mm Weight 2500 - 3000 kg Contact the advertiser Przemyslaw Kretowicz is online lignum 602 Show number

Year of construction: 1999, condition: ready for operation (used), machine/vehicle number: 9920268, GEISS DU2000 T7 Vacuum Thermoforming Machine • 1999 • 2000 × 1000 mm • Halogen Heaters • Sinumerik Control Iajdpfxox Uz Nco Ag Uel Industrial vacuum thermoformer with large 2000 × 1000 mm sheet capacity and deep draw capability up to ~650 mm. Equipped with high-speed halogen flash heaters, Sinumerik heater control, three vacuum pumps, plug assist, auto sheet loader, and motorized window plates for rapid tool changes. Excellent for high-volume thermoformed parts production.

Condition: used, Year of construction: 2016, Ref:11045 . 2016 Dürselen PB 04 N Paper Drill Free standing 4 headed paper drill Iaedpfsx Nfp Ajx Ag Ujl Equipped with: Four drilling heads with adjustable spacing. Pneumatic cooling and lubrication for drills. Automatic drilling cycle, foot pedal control. Waste directed to outer door Drill table with adjustment, front and side margins. Table lock is automatically released. Technical data: Diameter of the drill: 2-10 mm, Stack height: 60 mm.

Year of construction: 2000, condition: used, core boring STIHL Iajdox U A Ndspfx Ag Ujl number 2 Stück 1 Stück 4 Stück +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 1999, Drill grinding machine, drill grinding device, tool grinding machine, twist drill grinding machine -Manufacturer: CUOGHI AFFILATRICI, drill grinding machine type APE60 with point thinning device -Drill chuck: up to Ø 60 mm -Grinding discs: Ø 200 x 45 x 32 -Coolant system: present -Accessories: incl. tools (see photo) -Dimensions: 860/880/H1300 mm Iedpfx Aoyab Syeg Ujal -Weight: 275 kg

Condition: new, BRAND NEW T-TYPE FLOOR BORING AND MILLING MACHINE HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN Package (motors, measuring systems, and handwheel) X-axis: 4,000 mm Z-axis: 1,500 mm Y-axis (cross ram): 1,300 mm V-axis (column traverse): 1,000 mm Rotary Table (C-axis): 2,000 x 2,000 mm Max. table load capacity up to 15,000 kg Automatic universal 1° x 1° swivel head (optionally with fixed quill Ø 210 mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS – internal coolant supply – 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Isdpfxoq I Nkbj Ag Ujal Chain-type tool changer: 60 stations (vertical / horizontal change) Double hinged belt chip conveyor (longitudinal) Perimeter guarding (open top) Only inquiries from Germany will be answered.

Condition: excellent (used), Year of construction: 2004, drilling capacity: 32 mm, column diameter: 200 mm, Heidenhain RADIAL ND 1200 R ; HeidenHain scales HeidenHain measuring probe for: Rectangle target pattern Frame target pattern Circle target pattern  Line target pattern Arm Length: 1000mm Iedpfox S H Nvex Ag Ueal Max. drill Ø cast: 32mm Max. tap Ø: 30M Stroke pinole: 240mm Max. distance spindle - table:860mm Min. distance spindle - table:320mm Floor / table area: 1370 x 700mm Speeds / ranges: 1220Rpm Spindle Taper: 4ISO/Bt/Mk Throat: 1000mm Column sleeve: 200mm Quill Ø: 50mm Length: 1400mm Width: 720mm Height: 1900mm Weight: 1200kg

Condition: good (used), Year of construction: 2000, 6 bar pressure with insertion device for cup hinges with 5-hole row, 1.6 kW, 380 Volt. Includes 3 drills for cup hinges and foot switch. Iajdex U Di Ejpfx Ag Ujl

Condition: used, Year of construction: 1996, Serial number: 8xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21912 Specifications: 1996 model 1848 hours (I'm a little worried) 564 stroke hours 82 kW Weight: 8160 Machine width: 230 cm Winch Directional instrument Boart HD125 hammer Chassis Diesel heater Videos Ready for delivery Description: We have a 1996 Nemek 503 TXI drilling rig w/ low hours for its age for sale. Errors and defects may occur as the rig is from 1996. But the owner says it works as it should. It has few hours on the engine and hammer in relation to its age. Ready for delivery Iedpexz N Ahofx Ag Ueal Own weight: 8160 Engine hours: 1848 Model: 503 TXI borerigg m/ lite timer i forhold til alder

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 102-20, Single head eyeletting machine for foot operation with automatic eyelet feed, Available for an eyelet size with inner diameter of 4 mm or 5.5 mm, With self-punching eyelets: up to 20 sheets with 80 g/m2 paper or material thickness up to 2 mm Isdpfxjwgw Ulj Ag Ueal

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, year of last overhaul: 2025, total height: 1,150 mm, total length: 1,650 mm, total width: 900 mm, type of input current: three-phase, overall weight: 195 kg, input current: 16 A, control voltage: 220 V, Fat Frying Unit Riehle Wendomat 36 Riehle Model: Wendomat 36 1 turning basket for up to 36 pieces 1 proofing trolley Frying station in stainless steel design Connection 400V, 16A-CEE plug Used machine, cleaned with warranty + spare parts service Iedpfxsyagngj Ag Ueal Quality from a specialist company! Benefit from over 35 years of experience! Options: Maintenance contract Delivery service Additional aluminium tilting containers Service package Instruction & commissioning Visit our large bakery machinery exhibition!

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,500 mm, table load: 8,000 kg, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,440 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 12,000 m/min, feed rate Z-axis: 12,000 m/min, travel distance W-axis: 500 mm, workpiece weight (max.): 8,000 kg, quill travel distance: 500 mm, quill diameter: 110 mm, overall weight: 25,000 kg, Equipment: rotational speed infinitely variable, BRAND NEW BORING MILL (T-CONSTRUCTION) Controls and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package: motors, measuring systems, and handwheel IKZ: Internal coolant supply, 20 bar Iajdpfoxc Hphex Ag Uol Additional Equipment: Chain-type tool changer with double gripper, 60 positions Double hinge belt chip conveyor (longitudinal), one at the front and one at the rear Perimetric enclosure Spindle support bearing 250mm Hinged belt chip conveyor RENISHAW RMP 60 touch probe Only inquiries from Germany will be answered.

Condition: excellent (used), Year of construction: 1994, Arm Length: 1600mm Max. drill Ø cast: 60mm Max. tap Ø: 42M Stroke pinole: 310mm Max. distance spindle - table:1505mm Min. distance spindle - table:320mm Floor / table area: 1470x986mm Speeds / ranges: 2500Rpm Ijdpfxjx Sx D So Ag Ueal Spindle Taper: 6ISO/Bt/Mk Quill Ø: 55mm Power: 4kW Length: 2900mm Width: 1200mm Height: 3200mm Weight: 4700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank Isdpfjn N Ekcox Ag Ueal - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: used, Column drilling machine - Capacity: 40 mm - Morse taper 4 - Automatic feed - Variable spindle speed: 50-1280 rpm - Spindle stroke: 180 mm - Table: 720x560 mm Iasdpjx Ttunsfx Ag Uol - Column diameter: 160 mm - Throat depth: 340 mm - Coolant system - Workpiece vise

Condition: used, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 21854 Specifications: 2019 model About 7135 hours (will give a little) Stroke hours: 3432 hours Iedpfx Agsxypt Re Usal Compressor time: 5292 hours Chassis (see pictures) CME grinder Water mist Leica GPS Recently serviced Carousel Vacuum cleaner Rod shifter Automatic drilling Protective cage Winch Air conditioning/ac Radio Remote control Light Ready for delivery   Description: We have a 2019 DX800i drilling rig w/ water mist and Leica GPS for sale. All services and maintenance have been carried out continuously and the rig is in good condition according to the owner. The rig has recently undergone new service. Ready for delivery Engine hours: 7135

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 400 V, warranty duration: 12 months, total height: 300 mm, total length: 660 mm, total width: 800 mm, type of input current: three-phase, overall weight: 49 kg, NEW Tabletop Fat Fryer F 48 NEW Stainless steel construction 2 immersion grids with drip tray in the steam lid Fat basin heating manually adjustable up to 200°C with safety thermostat Isdpfx Aoyaf T Ijg Ueal Capacity approx. 480 / 360 pcs/hr Donuts / Berliner Dimensions: 800 x 660 x 300 mm, W x D x H DGUV V3 tested exclusively by us Connection 400V, 6 kW, 16A CEE plug New device & SAB tested 12 months warranty + spare parts service Options: Immersion grid Base frame Maintenance contract Spare parts box Service package Delivery Training & commissioning Visit our large showroom!

Condition: used, Line boring machine WEBO with 4 stations type B 20 make no. 376/13; 376/14; 376/27; 376/36 year of construction approx. 1970 drilling capacity 20 mm spindle adaptor MK 2 - long spindle sleeve drilling head distance 335 mm throat 260 mm pinol stroke 190 mm table size 350 x 1500 mm distance drilling spindle/table min.30 mm / max. 700 mm Spindle speed drill head 376/13 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/14 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/27 250, 355, 500, 710, 1000, 1400, 2000, 2800 rpm. Spindle speed drill head 376/36 180, 250, 355, 500, 710, 1000, 1400, 2000 rpm. Motor power 1,1 / 1,3 kW Mains connection 380 Volt, 50 Hz Iasdpfxjihmwto Ag Uol - Spindle speed via 2 motor speeds and 4 V-belt steps - drill head height adjustment via toothed rack and hand crank approx. 300 mm - height adjustable drilling table approx. 350 mm space requirement L x W x H 1750 x 1100 x 1900 mm weight 1900 kg good condition

Condition: good (used), functionality: fully functional, input voltage: 400 V, year of last overhaul: 2024, total height: 1,135 mm, total length: 825 mm, total width: 1,025 mm, type of input current: three-phase, overall weight: 258 kg, Fat Fryer esback 480 Reversible basket for up to 48 pieces Manual lifting and removal mechanism Temperature controller Steam lid, drip tray on the left Stainless steel design, mobile Connection: 400V, 32A-CEE plug Dimensions: 1025/2025 x 825 x 1135 mm (W x D x H) Ijdpfeyaf Ifsx Ag Ueal Used machine We have more fat fryers in stock!

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Iedpfx Agexddwrs Ueal Good condition