Used Deco for sale (759)

Condition: good (used), Manufacturer: LIV load capacity: 2x2t maximum plate width: 310 coil inner diameter: 380-460 mm Gedpfei Azy Hex Admjtt max. reel outer diameter: 1200 mm

Condition: used, carrying force: ca. 50 kg Gjdpfoc Rf Slsx Admett tape width: bis ca. 50 mm tape exterior-Ø: 750 mm engine: 400 V, 390 Upm, 0,25 kW space needed: 850 x 600 x 1350 mm weight: ca. 100 kg

Year of construction: 1980, condition: used, strip width: max. 2.000 mm strip thickness: 0,4 - 4 mm coil weight: 20 t cone Ø: 300 - 1.000 mm Gsdpfx Aockanpedmott

Condition: good (used), Year of construction: 1976, Pressing force: 20 t Stroke rate: max. 150 rpm, adjustable via PIV gearbox from the control panel Stroke, adjustable: 10 - 50 mm Installation height: 270 mm (maximum stroke at top, without wedge plate) Ram reinforcement: 50 mm Table area: 340 x 320 mm (W x D) Pass-through opening: 70 x 180 mm (W x D) Ram area: 160 x 230 mm (W x D) with wedge plate Drive power: 2 HP Gedpowufrzefx Admett Features: - 1 connecting rod - Double V-ram guide - Motorized oil lubrication - Manual ram adjustment, 50 mm - Mounting bracket for feed unit, tiltable - 3 cams for feed unit etc. - Free-standing control panel - Forward and reverse operation - Manual setup using a rod

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides Gsdpfx Adoif Sg Semott - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Year of construction: 1994, condition: used, Material width: 20-80 mm Material thickness: 0,3-1,5 mm Speed: 0-40 meter/min. working direction left-right Rolls: 20 pcs., diameter 30 mm Decoiler capacity: 300 kg pneumatic break Gedpfx Asdc Ez Hodmott

Condition: good (used), load capacity: 200 kg material width: 200 mm Gtedpfx Asihvdrsdmot coil inner diameter: 240-500mm Coil outer diameter: 1200mm

Year of construction: 1994, condition: used, decoiler - expansion mandrel with coil lifter strip width: max. 650 mm strip thickness: max. 3 mm coil weight: 2 t mandrel Ø: 406/508/610 mm Gtedpobh S Dpofx Admot

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Gjdpfodhzf Iex Admett Straightener Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) Godjhx R Etjpfx Admott - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: good (used), Year of construction: 1998, Manufacturer: LIV load capacity: 2x2t Gtodpfx Aji D Dxysdmot maximum plate width: 310 coil inner diameter: 380-460 mm max. reel outer diameter: 1200 mm

Year of construction: 1975, condition: good (used), strip width: 200 - 1.650 mm strip thickness: 0,6 - 3 mm coil weight: 7,5 t mandrel Ø: 508/610 mm Gtsdpjd Ha E Ajfx Admot

Condition: used, Decoiler, pivoting decoiler GSW SCHWABE Type LHD 50/800 Sond Double decoiler, double mandrel decoiler Factory No.: 5775 Year of manufacture: approx. 1995 Coil weight: 50 kg per side Coil width: max. 130 mm Coil inner diameter: 155 - 445 mm Godpehubgwofx Admjtt Coil outer diameter: 850 mm Support discs: Ø 850 mm Start rings: Ø 850 mm Distance from center of mandrel shaft to base: 980 mm - Manual 180° rotatable decoiler assembly with locking positions - Central expansion via rotation lever adjustment - Mechanical disc brake, adjustable brake shoes with knurled screw Required space (L x W x H): 1000 x 850 x 1500 mm Weight: 190 kg Good condition

Condition: good (used), dimensions (l x w x h)approx. : 3550 x 2400 x 2300 mm weight approx. 7000 kg coil weight : 6000 kg: Coil width 1250 mm Max coil diameter: 2500mm Gtjdjhhyzcopfx Admst Coil inside diameter: 480-510mm Without control cabinet!

Year of construction: 1988, condition: used, decoiler - expansion mandrel with coil lifter Bandbreite: max. 400 mm Gjdpfobh S Hkex Admett Banddicke: 0,3 - 4 mm Coilgewicht: 4 t Dorn-Ø: 508 mm

Year of construction: 1977, condition: used, strip width: max. 800 mm coil weight: 12 t Gtsdpfx Adsbh Sz Ssmet mandrel Ø: 450 mm

Year of construction: 1968, condition: used, strip width: max. 500 (650) mm strip thickness: 0,4 - 8 mm coil weight: 13 t Gtedpfx Adebh S Dyemet mandrel Ø: 508 mm

Year of construction: 1975, condition: used, strip width: max. 450 mm strip thickness: 0,2 - 4 mm Gedobh S E Eopfx Admott coil weight: 5 t mandrel Ø: 406/508 mm

Condition: excellent (used), Year of construction: 2009, decoiler - expansion mandrel type: AE-050 Gtsdoupg Scjpfx Admot strip width: 400 - 1.500 mm strip thickness: 0,5 - 3 mm coil weight: 20 t coil OD: max. 1.800 mm mandrel Ø: 508 mm year: 2009

Year of construction: 1971, condition: good (used), decoiler - expansion mandrel with coil lifting table strip width: 1.200 mm strip thickness: 0,3 - 5 mm coil weight: 10 t Gtjdsd Ha E Sspfx Admst mandrel Ø: 508 mm

Year of construction: 1967, condition: good (used), strip width: 300 - 1.250 mm strip thickness: 0,5 - 3 mm coil weight: 6 t Gjdpfed Ha E Ijx Admstt mandrel Ø: 508/610 mm

Condition: new, Year of construction: 2012, strip width: max. 600 mm strip thickness: max. 3 mm coil weight: max. 4 t coil OD: max. 1.500 mm Gtedpfswzu E Dox Admst mandrel Ø: 508 mm year: 2012 (never used)

Condition: new, Year of construction: 2012, strip width: max. 600 mm strip thickness: max. 3 mm coil weight: max. 4 t coil OD: max. 1.500 mm mandrel Ø: 508 mm year: 2012 (never used) Gjdpfx Adswzu Edjmott

Condition: excellent (used), Year of construction: 1980, spool width: max. 1.600 mm spool ID: 150/250/400 mm coil weight: max. 4 t Gtedpjwzuwtjfx Admst coil OD: max. 1.250 mm year: approx. 1980

Condition: excellent (used), strip width: 160 - 1.050 mm strip thickness: 0,4 - 3 mm reference material (tensile strength): 420 N/mm² Gtsdpfxsxayy Ij Admjt coil weight: max. 7,5 t coil OD: max. 1.600 mm