Briquetting machine

Prodeco E60 Super

Condition: new, Year of construction: 2024, The E60 Super briquetting machine is a highly efficient briquetting machine, the speed of which, depending on the processed material, ranges from 40 to 100 kg/h. The device uses a 10kM engine. The briquetting machine is powered by 400V - 50Hz. The output material has a diameter and maximum length of 60mm. The device has a double pressure gauge, a device for measuring the oil level and a viewing window. SIEMENS LCD control, maintenance-free operation of the machine. Dsdpfjtvmf Njx Afnsun Processed materials: • sawdust, • paper, • straw • etc. Briquette diameter: 60mm Engine power: 7.5 kW, IE2, high efficiency Efficiency: 40/100 kg/h Cylinder diameter: 1000mm Pressing force: 900 kg/cm2 Maximum briquette length: 60mm Power supply voltage: 400 V Dimensions: 1510 x 1850 x 1170 mm Weight: 770 kg Number of cycles: 7/min Number of cylinders: 3 Pump pressure gauge: electronic Oil level and temperature sensor: in the tank Control: PLC Siemens

Condition: new, Year of construction: 2025, saw band length: 3,920 mm, saw band width: 34 mm, Double column bandsaw fully automatic Everising H-260 HB Cutting range round: 0 - 260mm Cutting range square: 300 x 260mm Bundle tension: Width: 145 - 190mm Bundle tension height: 30 - 130mm Drive power: 3.7 kW Saw blade dimensions: 3920 x 34 x 1.1mm Weight: 1759 KG Machine dimensions: 2170 x 2100mm Dusdpoq Ulxyjfx Afnon The standard equipment of the machines is as follows: Solid steel construction in double column principle - NC feed system - Frequency-controlled cutting speed (infinitely variable, inverter-controlled) - Digital cutting speed display - Hydraulically controlled double horizontal clamping vices - Hydraulic saw band tensioning - Saw band guides (incl. band back guide) made of carbide - Hydraulically pre-tensioned band guides - Precise PLC control (SPS) for all hydraulic and electrical components. - Cutting counter with automatic switch-off - Automatic out-of-stock switch-off - Multi-job function - Bundle clamping device - Driven chip brush - Automatic belt breakage control incl. emergency stop - Chip flushing gun - Flexible work light - 2 meter roller conveyor - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction - Cutting process control Extensive complete German documentation.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 4,000 mm, overall weight: 820 kg, load capacity: 500 kg, The offer concerns the following set: (possibility to adjust device parameters or to purchase the vacuum lifter or jib crane separately) - Vacuum lifter for boards, suitable for handling MDF, laminated boards, raw boards, particle boards, etc. (model WOOD SYSTEM DS 250) Dodsxln Drepfx Afneun - Stationary jib crane - Electric chain hoist - Manual trolley Features of the WOOD SYSTEM DS 250 vacuum lifter: - Designed for handling boards - Actuator for rotation between vertical and horizontal positions - 6 suction cups Ø 200 mm - Frame allows for adjustment of suction cup positioning to match the material being handled - Beam length: 2500 mm - Each suction cup is equipped with a ball valve for individual deactivation - Integrated air pulse function to prevent material adhesion - Individual X and Y axis adjustment for each suction cup - Control from the operating console (control panel): - Power on/off for the generator - Vacuum engagement/release - Thumb-operated control of the electric hoist – raising/lowering the lifter - Pressure gauge - Pneumatic supply – equipped with vacuum generators - Lifting capacity: 400 kg - Device weight: 100 kg - CE certificate Stationary jib crane Technical data: • Column height: 4 m • Height under the jib: 3 m • Jib length: 4 m • Lifting capacity: 400 kg • Slewing range: 270 degrees • Lifting speed: approx. 3 m/min • Colour: any RAL palette colour on request • Manual slewing • Manual trolley • Quadruple/double needle bearing on the jib arm for smooth rotation • Electric chain hoist • CE certificate INCLUDED IN THE PRICE: • Pillar jib crane • Electric hoist – single phase • Manual trolley • CE certification • Complete documentation Standard warranty: 12 months

Condition: reconditioned (used), Totally renovated Log Haul Conveyor 8 Meters long Dusdpfxoncft Us Afnjn

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Dodpfx Aev Rpxlsfnjun Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: new, Year of construction: 2025, Capacity: 25 and 40 kg/h Djdpfx Afspfatponeun Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Container size: 0.38 m³ Power consumption: 4 kW Machine length: 1860 mm Machine width: 890 mm Machine height: 1100 mm Weight: 400 kg

Condition: new, functionality: fully functional, power: 56 kW (76.14 HP), gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 6.5 l/h, fuel tank capacity: 100 l, color: yellow, overall weight: 8,650 kg, empty load weight: 6,741 kg, operation weight: 6,760 kg, tire size: 12.5/80-18, tire condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, shovel volume: 0.2 m³, Year of construction: 2025, operating hours: 1 h, Equipment: UVV, additional headlights, air conditioning, all wheel drive, cabin, differential lock, gripper hydraulics, hydraulics, low noise, parking heater, standard shovel, traction control, === MAIN SPECIFICATIONS === Year of manufacture: 2025 Operating hours: 0 h Operating weight: 6,741 kg Max. digging depth: 3,795 mm Digging reach: 6,445 mm Bucket capacity: 0.15 – 0.20 m³ Engine manufacturer: Perkins 404F-E22TA Engine power: 56 kW (≈ 76 hp) Drive: Diesel Type: Wheeled excavator Quick coupler: Yes (Easy Lock preparation) Hydraulic functions: 4 AUX circuits (AUX I – IV, incl. Powertilt, High Flow) Air conditioning: Automatic climate control Cabin: Enclosed, heated Travel speed: 30 km/h Stabilisers: No Tyres: Pneumatic tyres Emission standard: Stage V CE certification: Yes === HIGHLIGHTS === 3-point kinematics for superior digging performance Intuitive operation with ergonomic joysticks Powerful LUDV hydraulic system with four AUX circuits Triple boom for maximum reach and flexibility Overload valve (AUX I) and Powertilt circuit (AUX III) Easy Lock preparation (AUX IV) and electric refuelling pump Automatic air conditioning and heated cabin Fully CE certified and immediately available Dujdpfx Afjxrpccenen === CONDITION === New 2025 model – in excellent working condition, fully inspected and tested by certified professionals. Inspection available upon request. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). The Wacker Neuson EW65 combines power, precision, and comfort. Equipped with a Stage V Perkins engine, four auxiliary hydraulic circuits, and a triple boom, this wheeled excavator is ideal for intensive daily use in construction, infrastructure, and urban projects. Fully CE-certified and immediately available via Collé Rental & Sales. === DELIVERY === Crane loading available upon request for smooth transport. Flexible shipping options tailored to your destination and logistics preferences. All transports are handled professionally by the Collé Rental & Sales logistics team.

Condition: excellent (used), Year of construction: 1997, Rover 20 machining center Dsdpolc Dwnofx Afnsun Working area 2,893 x 950 mm, milling spindle with ISO30 tool holder 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills as well as grooving saw, 6-fold tool changer. The NC410 control had a floppy disk drive and a colour screen as well as the simplest, graphically supported programming options. Furthermore, the Rover 20 already enabled pendulum machining. Dimensions: approx. 3800 x 2000, height 1600 Control cabinet: 950 x 700 x 1300 From location

Condition: used, Grindermak 150-06 Duedpfefuakcox Afnon Grindermak 150-06 New Punch press tool grinder based on the Amada Togu CNC grinder Grindermak 150 06 / For sale Table Stroke/movement 180mm Distance between table and wheel (max) 230mm Z movement 0,0001-20mm Cutting wheel Diameter (max) 150mm Cutting wheel rotation 3400 D/dk Cutting wheel power 1,1kw-3000 D/dk Stroke engine (z) 400W Complete with touch screen. In stock. Amada Togu / Trumpf quick sharp type grinder / Quick grind / Quick set / Quick load/

Condition: used, Year of construction: 2019, operating hours: 4,300 h, Equipment: all wheel drive, * Wacker Neuson EW 65 wheeled excavator Djdpfjyfk A Eex Afneun * Year of manufacture: 2019 * 4300 operating hours * 7290 kg * 45.5 kW Perkins engine * 30 km/h * Hydraulic Powertilt quick coupler * 3 buckets: 125, 60, 40 cm * All hydraulic lines * Air conditioning * Central lubrication * Camera * Particulate filter * Track width approx.: 208 cm