Used Deber Milling Machine for sale (91,605)

Condition: good (used), Year of construction: 2016, Machine No.: 0-250-21-2117, Control system by Homag, type powerControl V2.0, travel paths X/Y/Z: 8,400 x 3,270 x 410 / 185 mm, nesting working level, traverse speed X/Y/Z: 130 x 130 x 20 m/min, workpiece thickness 125 mm, support table 7,400 x 2,250 mm, max. workpiece passage height 100 mm, milling unit, 3 controlled axes, liquid cooling system, 24,000 rpm, drilling unit with 18 spindles for vertical drilling, saw unit, 2 tool changers with 14 holders each, stacking system by Eurotech, type PJ-16.003, year of manufacture: 2013, max. format 6,000 x 2,000 mm, max. weight 290 kg, with protective enclosure, outfeed belt width 2,000 mm, including triple extraction, switch and fuse cabinets. Isdpfxexl Afwo Aaceih

Condition: good (used), Year of construction: 1995, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,600 mm, table length: 6,000 mm, table width: 1,000 mm, table load: 16,500 kg, ATC Chain Tool Changer 30 Positions Automatic head 2.5 x 2.5 ( Overhauled in 2023) AME Chip conveyor new 2013 Iisdpoxf Hitjfx Aacoh HeidenHain HR410 Handwheel Under power X-Axis: 4500mm Y-Axis: 1200mm Z-Axis: 1600mm Table Length: 6000mm Table Width: 1000mm Table load: 16500 Power on spindle: 32kW Spindle speeds: 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 25000mm/min. Feed rate Y-Axis: 25000mm/min. Feed rate Z-Axis: 25000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 10100mm Width: 6300mm Height: 4350mm Weight: 28500kg

Condition: used, Year of construction: 1998, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table surface area 700 x 500 mm tool taper 40 SK/ISO spindle turning speed range 20- 4500 U/min feeds 5000 mm/min spindle motor 12 kW total power requirement 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3 x 2 x 2 m Iisdpjxg R Ezefx Aacsh Table could be rotated and swiveled manually with digital readout in C- and B- axe over control panel. Control: Heidenhain TNC 124.

Condition: like new (used), Year of construction: 2004, Retrofitted: 2024/2025 Iijdpfxsugbpis Aacjh Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 4000 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmDistance between columns: 2530 mm Milling head Universal manual UM40Tool clamping system: HydraulicTaper nose: ISO50Speed range: 20 - 3.000 rpm (5.000 rpm direct exit)Spindle power: 30 kW Feedrates Feedrate: 7000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10926 x 4768 x 5110 mm Accesories GuardingExternal coolant. Electronic handwheel: New HR-510 Sales conditions Guarantee: 6 months mechanical partsSale price (Ex Work): On request View all technical features

Condition: used, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 475 mm, overall weight: 1,850 kg, table length: 1,100 mm, table width: 250 mm, Spindle taper: ISO 40 RPM.: 35-1800 (variable) Travel: X750 Y280 Z475 mm. Table size: 1100 x 250 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Motor: 5 HP. Digital readout: Heidenhain Positip 850 (X, Y & Z) Country of origin: Spain. Size (L x W x H): 1850 x 2100 x 2000 mm. Weight: 1850 kg. Iodsxpfy Espfx Aacjih Variable speed with digital readout in 2 gear ranges, variable feed speed with digital readout, work ligth and 3-axis Heidenhain digital readout. All our machines are tested and serviced before delivery.

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Condition: workshop checked Rigid milling spindle; new bearings With table extension with extendable Frame support 2500 mm Iiedpfx Aew I Uinjacsh Motor 5.5 kW Speeds 3000/4500/6000/8000/10000 rpm Milling stop with 2 adjustment options; one overall stop and one rear removal jaw Suction hoods 120 mm Automatic motor brake Right-left rotation With Haffner feed with 4 rollers Weight approx. 700 kg Availability: by arrangement Location: Flörsheim

Condition: good (used), Technical data: Travel paths: Ijdpfx Asw Ebhmoaceih Longitudinal X-axis: 762 mm Cross Y-axis: 305 mm Vertical Z-axis: 406 mm Quill travel: 127 mm Spindle mount: collet chuck Table size: 1067 x 229 mm Speed range: 50–3750 rpm in two steps Weight: 1000 kg Equipment: - SONY digital readout, 2 axes (X and Y-axis) - Machine lamp - Drill chuck 0–13 mm - Collet system - Machine vice, jaw width 150 mm - Safety guard, electrically secured, type ZE-FS 30-300, fully mounted - Documentation Condition: good, workshop-tested

Condition: good (used), Year of construction: 2009, travel distance X-axis: 6,230 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 1,100 mm, table length: 6,000 mm, table width: 3,000 mm, table load: 15,000 kg, Portal milling machine KAO MING - KMC 636 Multiface Double guideway four box way construction Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    345 - 1445 mm Distance table spindle center 132 - 1232 mm Indexing Horizontal head 5 Degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torq 1018 Nm ISO50  Isdpoxf Haxofx Aacoih X - Travel: 6230mm Y - Travel: 4250mm Z - Travel: 1100mm Distance between column: 3600mm Table Length: 6000mm Table Width: 3000mm Table load: 15000 Feed rate X-Axis: 7000mm/min. Feed rate Y-Axis: 8000mm/min. Feed rate Z-Axis: 10000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 4000Rpm ATC / revolver: 30 Number of controlled axis:3+2 Chip conveyor: Yes Coolantsystem: Yes Length: 14330mm Width: 7913mm Height: 5080mm Weight: 66000kg

Condition: used, Year of construction: 2013, operating hours: 3,064 h, Applicable material: Asphalt Serial number: 10188210xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20327 Specifications: - 2013 model - 3064 hours - Deutz engine - Hydraulic lift and lower - Milling width of 60 cm - Lower and raise function on the roof - Ready for delivery Description: We have a 2013 Bomag BM600/15 Asphalt milling machine for sale. Everything works as it should according to the owner. Services have been carried out at our own workshop. The milling width is 60 cm. Errors and defects may occur. Ready for delivery Iiedjwi Rc Uepfx Aacoh Hours: 3064 Own weight: 6800 Model: BM600/15

Condition: good (used), Year of construction: 2006, operating hours: 33,044 h, functionality: fully functional, machine/vehicle number: 86624, travel distance X-axis: 3,500 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, mount diameter: 40 mm, total width: 4,000 mm, total height: 3,400 mm, total length: 9,000 mm, table length: 4,000 mm, table width: 600 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, overall weight: 20,000 kg, number of slots in tool magazine: 36, TECHNICAL DATA & EQUIPMENT: Operating voltage: 3 x 400 V Frequency: 50 Hz Max. rated current: 100 A Connection: 55 kVA Table with 5 T-slots Note: machine vices shown in the photos are not included Includes 36-position tool changer, chip conveyor, and coolant system COLLECTION NOTES: Isdpexm S Ikofx Aacoih Collection must be definitively arranged between December 10th and 12th FCA Winterlingen, loaded onto truck

Condition: used, Year of construction: 1987, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 450 mm, overall weight: 2,300 kg, table length: 1,300 mm, table width: 280 mm, power: 3.7 kW (5.03 HP), Spindle taper: ISO 40 Isdjxpftfjpfx Aacsih RPM.: 85-1300. Travel: X1000 Y315 Z450 mm. Table size: 1300 x 280 mm. Automatic feed: X & Y Rapid speed: X, Y & Z. Motor: 3,7 kW. Digital readout: Newall DP 700 (X, Y & Z). Year: 1987 Country of origin: Taiwan. Size (L x W x H): 1650 x 2100 x 2000 mm. Weight: 2300 kg. All our machines are tested and serviced before delivery.

Condition: used, x-travel 600 mm y-travel 210 mm z-travel 425 mm table-size 950 x 230 mm turning speed range 31,5 - 1250 U/min power requirement 1,5 kW tool adaptor ISO 40 | feed speeds 4- 250 mm/min | weight 1,1 t range L-W-H 1,8 x 1,5 x 1,63 m Iiodpfxolug Uns Aacsh Universal tool room machine - turn- and swiveling v- head . h- spindle - automatic feed - hand wheels - coolant system - machine light - 16 gear steps

Condition: used, Year of construction: 2009, x-travel 3.500 mm y-travel 1.200 mm z-travel 1.250 mm Control HEIDENHAIN TNC-530 table-size 1.250 x 1.250 mm table weight 4.000 Kg feeds 12.000 mm/min Number of revolutions 4.000 rpm power capacity 24 kW taper ISO 50 DIN 69871 AD spindle head Automatisch 2,5 x 2,5 Grad handwheel Heidenhain HR-410 internal coolant system feed 20 bar total power requirement 46 kW weight of the machine ca. 18.000 kg Iodpfx Asvzhbtsacjih dimensions of the machine ca. 7.800 x 4.850 x 3.530 mm -Integralverkleidung -Doppelter Längsspäneabsauger -Querspanabsaugung -500-l-Tank mit Magnetabscheider-Papierfilter

Condition: good (used), Year of construction: 2008, travel distance X-axis: 4,230 mm, travel distance Y-axis: 1,950 mm, travel distance Z-axis: 750 mm, table length: 4,000 mm, table width: 1,250 mm, table load: 11,000 kg, Portal milling machine KAO MING - KMC 4000 SV-H Double guideway two box way construction Ijdoxf E Twopfx Aacsih Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    213 - 1093 mm Distance table spindle center  130 -.mm Indexing Horizontal head 5 Degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torq 1018 Nm ISO50 Universal Huron type milling head X - Travel: 4230mm Y - Travel: 1950mm Z - Travel: 750mm Distance between column:1500mm Table Length: 4000mm Table Width: 1250mm Table load: 11000 Feed rate X-Axis: 12000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 12000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 4400Rpm ATC / revolver: 30 Chip conveyor: Yes Coolantsystem: Yes Length: 10100mm Width: 4500mm Height: 4250mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1989, functionality: fully functional, height adjustment type: mechanical, table length: 2,350 mm, spindle speed (max.): 9,000 rpm, overall weight: 850 kg, space requirement width: 1,200 mm, space requirement length: 2,400 mm, space requirement height: 1,620 mm, input voltage: 380 V, rotational speed (max.): 9,000 rpm, input frequency: 50 Hz, Equipment: motor brake, Spindle moulder with tilting spindle arbor -5/+45 degrees Milling fence with digital adjustment Iodpfx Aaoxl Sd Nocsih Speeds: 3000/4500/6000/9000 4-roller power feed

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 15105602, travel distance X-axis: 70 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 9,200 rpm, number of slots in tool magazine: 32, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Placing a bid obligates the buyer to collect the machine between 01.12.2025 and 05.12.2025. TECHNICAL DETAILS Travel X-axis: 70 mm Travel Y-axis: 315 mm Travel Z-axis: 180 mm Travel W-axis: 495 mm Feed rate X-axis: 9 m/min Feed rate Y-axis: 9 m/min Feed rate Z-axis: 4 m/min Spindle speed (max): 9,200 rpm Spindle speed (min): 50 rpm Spindle mount diameter: 30 mm Number of positions in tool magazine: 32 Iodpfx Asxm S R Ejaceih Max. tool length: 260 mm Max. tool diameter (all positions filled): 63 mm Table width: 410 mm Table length: 1,230 mm Table load capacity: 250 kg CNC control manufacturer: HEIDENHAIN MACHINE DETAILS Dimensions (L x W x H): 3,500 x 2,400 x 2,200 mm Distance floor to coordinate table: 1,010 mm Distance coordinate table to spindle nose: 125 to 620 mm Horizontal outreach: 370 mm EQUIPMENT Documentation/manual Continuously variable spindle speed FEHLMANN dividing head (4th axis) 126 SK 30 tool holders Supplementary documentation

Condition: used, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 8 rpm, overall weight: 3,850 kg, Spindle taper: ISO 40 RPM.: 8-1200. Travel: X1500 Y700 Z500 mm. Table size: 2000 x 420 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Ijdpfxsxn R U Sj Aacsih Country of origin: France. Size (L x W x H): 2000 x 2200 x 1700 mm. Weight: 3850 kg. Rapid speed, and automatic feed in X, Y & Z. With vice. All our machines are tested and serviced before delivery.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 52AMXTE5308, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 815mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.04, 0.08, 0.15mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.25Kw Spindle speeds (inf. Variable) 50-3500rpm Spindle to nose to table 0- 450mm Spindle centre line to column 171 – 482mm Overall height 2100mm Overall depth 1300mm Overall width 1625mm Weight 950Kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 3 axis DRO system Infinitely variable spindle speeds longitudinal power feed Iodpfewmn A Tjx Aacoih Cross power feed Table guarding One shot centralised lubrication system Lighting Base splash tray Coolant system NB Machine ex Dyson apprentice training facility, in excellent condition

Condition: used, Year of construction: 1995, operating hours: 24,142 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, feed rate X-axis: 3,000 m/min, feed rate Y-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, type of input current: three-phase, workpiece weight (max.): 1,500 kg, spindle motor power: 7,500 W, controller manufacturer: Heidenhain, controller model: TNC 360, For sale is a Lagun CNC milling machine, year of manufacture 1995, with 24,150 operating hours. Iisdpfxsxmhaie Aaceh Technical data: - Control: Heidenhain TNC360 - X-axis: 1100 mm - Y-axis: 600 mm - Z-axis: 600 mm - Table size: 1200 mm x 550 mm - Spindle taper: ISO50 BT40 - Speed range: 50–3000 rpm - Rapid traverse: 10,000 mm/min The machine is equipped with a manual universal milling head and an enclosure. The machine is in running condition and can be inspected under power.

Condition: used, Used machine Data to follow Ijdsxllw Ajpfx Aacsih

Condition: used, BOKO WF3-K, CNC Vertical Milling Machine, Heidenhain 426 CA CNC Control, Table 810 x 1300mm, X 1200mm, Y 755mm, Z 1050mm, Spindle speeds 18 – 1800rpm, Ram travel 300mm, Bed 3100 x 1300 x 600mm, Head 1100 x 1000 x 1400mm, Column 1400 x 1300 x 2400mm, Table and Saddle 3210 x 1250 x 750mm, Panel 1700 x 400 x 2000mm, +Pendant, coolant tank, Milling att. Tooling Isdpfx Asw U Uhqeacsih

Condition: new, The UWF 1.1, a top-tier Conventional Vertical Milling Machine in the Universal Milling Machines group, showcases the precision and robustness that KNUTH is known for. Equipped with a large clamping table and a swiveling universal milling head that pivots in two planes, it effectively meets the diverse needs of a universal milling machine, making it ideal for individual production, repair, and training workshops. The heavy machine frame is complemented by wide, adjustable dovetail guides across all axes, ensuring stability and accuracy. An automatic feed system operates through a gearbox, driving the X- and Y-axes, while rapid traverse is available for the Z-axis. With features such as a motorized height adjustment in the Z direction and an outer arbor support for horizontal milling, the UWF 1.1 stands out with its extensive standard equipment. Request a quote today to enhance your machining capabilities with this exceptional Conventional Vertical Milling Machine and Universal Milling Machine from KNUTH. Iisdpfxowub Acj Aacoh

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 345 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,750 rpm, spindle speed (min.): 50 rpm, table length: 1,370 mm, table width: 280 mm, overall weight: 1,500 kg, Spindle taper: ISO 40 RPM.: 50-3750 (trinløs). Travel: X800 Y345 Z400 mm. Table size: 1370 x 280 mm. Automatic feed: X, Y & Z. Iedpfxexn R Tzs Aacsih Rapid speed: X, Y & Z. Motor: 4 HP. Digital readout: Fagor, 3-axis Year: 2002 Country of origin: Spain. Size (L x W x H): 2000 x 2000 x 2350 mm. Weight: 1500 kg. Travel ram: 570 mm. With stepless spindle speed, motorized tool clamping, pneumatic spindle brake, drilling function in head with automatic feed and misc. tools. All our machines are tested and serviced before delivery.

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Features and technical data: Motor: 4 kW Speeds: 3000 / 4500 / 6000 / 8000 / 10000 rpm Spindle height adjustment via handwheel Ijdpexllxasfx Aacjih Dimensions (LxWxH): 1200x80x1350 mm Fence jaws made of wood Including wood-based 3-roller power feed with stand With chassis Dimensions: to follow Weight: to follow Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 35 rpm, overall weight: 2,600 kg, table length: 1,525 mm, table width: 325 mm, Spindle taper: ISO 50 RPM.: 35-1800 variable. Travel: X1050 Y330 Z475 mm. Table size: 1525 x 325 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Motor: 5,5 kW. Iisdpfxjxn R Tno Aacsh Digital readout: Fagor Innova (Z). Year: 2002 Country of origin: Spain. Size (L x W x H): 2400 x 2500 x 2200 mm. Weight: 2600 kg. Variable speed in 2 gears. All our machines are tested and serviced before delivery.