Used Toolroom Milling Machine for sale (65,285)

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Isdjxftqdepfx Afujih Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Iiedpfx Asxxb Rrsfush Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Iijdpfx Afex D Tbmeueh Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Working travels 300 x 150 x 355 mm Table size 700 x 250 mm Spindle taper for collets ISO 30 Spindle speeds 58-2'000 rpm Digital read-out Misc.accessories Iijdpfx Afsu Eqixeush MARCELS MASCHINEN CH

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable Iedpjzuxn Tjfx Afuoih 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 1992, condition: new, New ISO40 collet for FN 20/32/40 milling machines. Iijdsk Nk I Nspfx Afueh

Condition: good (used), Digital read-out With milling and drilling head Working travels 330 x 400 x 475mm Ijdpfxjw Nnutj Afusih Table size 650 x 245 mm Spindle taper for collets ISO 40 Spindle speeds 63-2'800 rpm Misc.accessories MARCELS MASCHINEN CH

Condition: excellent (used), Working travels 400 x 210 x 340 mm Table size 600 x 400 mm Spindle taper ISO40 Spindle speeds 40-2000 rpm digital read-out Misc accessories Iisdpfoxpubrox Afush MARCELS MASCHINEN CH

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 17,000 mm, travel distance Y-axis: 4,800 mm, travel distance Z-axis: 1,500 mm, table length: 16,000 mm, table width: 3,000 mm, spindle speed (max.): 3,000 rpm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, distance between stands: 3,800 mm, type of input current: three-phase, position of the milling head: vertikal / Winkelkopf, rotational speed (max.): 3,000 rpm, distance table to spindle center: 2,300 mm, overall weight: 90,000 kg, spindle nose: ISO 60 / ISO 50 Adapter, spindle motor power: 60,000 W, Equipment: rotational speed infinitely variable, ➡️ WALDRICH COBURG CNC GANTRY MILLING MACHINE ⬅️ Heavy Duty Machining | Siemens 840D Retrofit | Ready for Production High-quality CNC gantry milling machine manufactured by Waldrich Coburg available for sale in very good condition. ✔ Machine under power ✔ Inspection & test run possible ✔ Siemens 840D retrofit (2013) ✔ New electrical system & cabinets ✔ New motors & drives ✔ Heidenhain glass scales on all axes ✔ Ideal for large part machining & heavy-duty applications Technical Data X travel: 17,000 mm Y travel: 4,800 mm Z travel: 1,500 mm Floor plates: 16,000 x 3,000 mm Distance between columns: 3,800 mm Distance table to spindle face: 2,300 mm Spindle power: 60 kW Spindle speed: 0.4 – 3,000 rpm Tool taper: ISO 60 / ISO 50 adapter Machine weight: approx. 90,000 kg Equipment Siemens 840D CNC control 2-step gearbox Right angle head WFU 250 with automatic indexing Right angle head WFU 500 with automatic indexing Rapid tapping Tool trolley with tool holders Steel way covers on X/Y axes 2 chip conveyors Perfect for: Heavy machining Machine building Energy industry Shipbuilding Iodoy Rrb Iepfx Afujih Steel & rolling mill industry Subcontract manufacturing 📍 Location: USA 🌍 Worldwide shipping can be arranged 📞 Please contact us for more information, videos, or inspection appointments.

Condition: excellent (used), With DRO Working travels 300 x 200 x 350 mm Table size 600 x 200 mm Spindle taper for collets ISO 30 Spindle speeds 80-2'200 rpm Iiodpfxsy Iz Rmo Afush Misc.accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm Iijdpfxey Ni Ivj Afush D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Working travels 500x350x380mm Table size 790x360mm Spindle taper ISO40 Iijdpeff R Slefx Afuoh Spindle speeds 63-4000 rpm Active digital read-out Misc accessories MARCELS MASCHINEN CH

Year of construction: 1998, condition: new, New trapezoidal screw and nut for the X-axis, for FN20, FN32, FN40. Iiedpfx Aok Nk Iwjfush

Year of construction: 2002, condition: good (used), Heidenhain TNC 124 X-700 mm Y-500 mm Z-500 mm taper SK40 Spindle speeds 63-3150 rpm Table 900 x 500 mm weight of machine 2500 kg Iedpoinukmofx Afuoih machine checked before delivery spare-parts available

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Iisdpfxozmt U Eo Afuoh

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 Ijdpfsyahv Sjx Afusih S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: ready for operation (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 2,066 rpm, spindle speed (min.): 30 rpm, Huron MU6 Universal Milling Machine Model: MU6 Table Size: 2000 x 460mm ‘X’ Longitudinal Travel: 1500mm ‘Y’ Cross Travel: 700mm ‘Z’ Vertical Travel: 550mm Spindle Speeds: 30 – 2066 RPM Iiedez S Nkrspfx Afuoh Spindle Taper: 50 INT Machine with: Digital Readout

Condition: repair required (used), Universal Milling Machine HURON MU6 Travel X: 1500 mm Travel Y: 700 mm Travel Z: 600 mm Spindle: SA 40 Spindle speed: from 30 to 2066 RPM Table size: Length 2000 mm x Width 460 mm Spindle motor: 12 CV Scale: 3 axes HEIDENHAIN Centralized lubrication Machine sold as is, some works required: - freewheel of the advances box to be changed - Y-axis locking system needs to be checked - the ram inverter is non-functional - there is a leak on the spindle deflector - there is a missing pin on 1 gearbox lever Voltage: 380 V Length: 2200 mm (without ends table) Depth: 2000 mm Iiedpsz Stlgofx Afush Total height: 2000 mm Weight: approx 4 T

Condition: ready for operation (used), Year of construction: 2013, operating hours: 12,486 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 18,000 rpm, controller model: Siemens 840D sl, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Travel range Y-axis: 2,300 mm Travel range Z-axis: 1,000 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 40 m/min Design: C3 swivel head Swivel range C-axis: 200° Swivel range A-axis: 120° Spindle motor power: 24 kW Spindle mounting: HSK 63 A Spindle speed: 18,000 rpm Spindle cooling: Water cooling Design: Disc tool changer Tool magazine positions: 20 Pick-up positions: 1 Tool diameter: up to Ø 500 mm Table length: 2,000 mm Table width: 1,500 mm Table thickness: 30 mm Grid spacing: 100 x 100 mm Maximum load capacity: 2,000 kg Repeatability: approx. 0.012 mm MACHINE DETAILS Iisdpjz Izdujfx Afujh CNC control: Siemens 840D sl Spindle operating time: approx. 12,486 hours Power-on hours: approx. 37,297 hours EQUIPMENT 5-axis package: included Advanced Surface: included TCP: included Control panel size: 15 inches Remote maintenance: prepared Workpiece measuring probe: m&h wireless measuring probe Tool measurement: BLUM laser Minimum quantity lubrication: internal and external lubrication Central lubrication: automatic Spray mist extraction: with electrostatic separation Full protective cabin: included Tool changing chamber: separate Technical documentation Operating manual Omlat spare spindle included

Condition: good (used), Year of construction: 1964, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 250 mm, feed length Z-axis: 490 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 490 mm, total height: 1,720 mm, total width: 1,920 mm, total length: 2,250 mm, table width: 305 mm, table length: 1,100 mm, overall weight: 2,000 kg, space requirement width: 1,920 mm, space requirement length: 2,250 mm, space requirement height: 1,720 mm, Equipment: documentation/manual, We are offering this well-maintained Schaublin 53 milling machine, manufactured in 1964, for sale. Serial number: 271090 Technical data – Schaublin 53 N Model: N Longitudinal travel of table (X): 700 mm Vertical travel (Z): 490 mm Iijdpoyhm D Dsfx Afush Cross travel (Y): 250 mm Table clamping area: 1100 × 305 mm Number of T-slots: 5 Max. slot width: 14 H7 mm Spindle mounting (internal taper milling arbor): ISO 40 Spindle bore: 25.2 mm Main motor: 3 / 1500 kW·t/min Rapid feed motor: 1.2 / 3000 kW·t/min Power: 5.1 kW Rapid traverse speed: 3500 mm/s Dimensions (L×W×H): 2250 × 1920 × 1720 mm Weight: 2000 kg Documentation available Accessories available: Dividing head, steady rest, jaw chuck, centering point, various clamping elements and accessories If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, Universal bed-type milling machine | Brand: KIHEUNG | Type: KNC U 1050 BT Year of manufacture: 2021 An ideal milling machine for high chip removal rates combined with excellent geometric machining accuracy. The machine can be inspected by prior appointment under power. Operating hours (October 2026): - Control system on: 848 h - Machine on: 15.810 h - Program run: 7.632 h - Spindle: 5.624 h TECHNICAL SPECIFICATIONS - Path control: HEIDENHAIN TNC 640 Travels: - X-axis: 3.000 mm - Y-axis: 1.050 mm - Z-axis: 1.300 mm Table: - Length x width: 3.200 x 900 mm, max. table load: 1 ton Feed rates: Iiodpfez Tdlyox Afuoh - Feed rate in all axes: 10.000 mm/min - Rapid traverse on X, Y and Z axes: 16.000 mm/min each Spindle: - Tool holder: SK 50 - Spindle speeds: 2-stage * Speed range (stage I): 0 – 1.000 rpm * Speed range (stage II): 1.001 – 4.000 rpm - Machine weight: approx. 26 tons EQUIPMENT - Path control: HEIDENHAIN TNC 640 HSCI - Full enclosure of the working area - 2 chip conveyors (hinged belt) - Linear measuring system using “HEIDENHAIN” measuring rods - AC drives, SIEMENS - ZF reduction gearbox, 2-stage, cooled - K5 Universal automatic milling head, bi-rotating, 5.000 rpm / 1.0° x 1.0° - 1 x milling head – NEW (in original packaging) – - Tool changer (chain magazine), horizontal/vertical change * Capacity: 40 positions - Cooling through the spindle - High-performance cooling system, with 2 high-pressure pumps - Touch probe, HEIDENHAIN TS 460 - Probing system for workpiece measurement, HEIDENHAIN HR 550 FS + HEIDENHAIN HRA551 FS portable, electronic handwheel with radio control - Magnetic clamping plate, SCHUNK: 800 x 500 mm - Various spare and wear parts - Documentation - CE Declaration of Conformity - Further good features … No guarantee is given as to the completeness or accuracy of the technical specifications or the equipment. - Subject to prior sale - Detailed technical data sheet and information on features are available upon request.

Condition: ready for operation (used), Universal milling machine / DECKEL FP 33 including Heidenhain digital display & accessories - COMPLETE TECHNICAL DATA – SEE PHOTO - Heidenhain digital display - Various accessories - Documentation - Crane Iedez N S U Uopfx Afusih Dimensions: L x W x H 2.5 x 2 x 2 meters / Weight 5000 kg Errors and omissions excepted.

Condition: used, total height: 2,000 mm, total width: 1,500 mm, total length: 1,800 mm, Year of manufacture: 1967 Colour: Grey Empty weight: 3.000 kg - Year: 1967 - Documentation available: Yes - CE certificate present: No - Serial number: 2166 - Drive system: Conventional - Horizontal/vertical: vertical - Power [kW]: 4.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 900 - Y-axis travel [mm]: 220 - Z-axis travel [mm]: 380 - B-axis rotation [°]: 360 - Table length [mm]: 1300 - Table width [mm]: 300 - Tool holder: ISO40 - Main spindle power [kW]: 3.5 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 1360 - Transport dimensions: 1800mm x 1500mm x 2000mm (l x w x h) Iedpfx Ajyym Risfuoih - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, For sale: a DECKEL FP1 tool milling machine with a very extensive range of accessories and the original operating manual. The machine is in very good condition and is fully functional without any limitations. Price plus VAT. Collection from Ahrensburg. Sale only within Germany. Ijdpfxjzr E D Ne Afujih

Condition: good (used), Year of construction: 1995, Milling machine Iiedpfx Aop Nnp Sofuoh