Bed milling machine

ANAYAK VH Plus 4000-HS

Condition: good (used), Year of construction: 2019, machine/vehicle number: XD-38II-CP-0703-H, turning diameter over cross slide: 38 mm, spindle speed (max.): 6,500 rpm, turning diameter: 38 mm, spindle bore: 39 mm, power: 7.5 kW (10.20 HP), The machine can be viewed at our Immendingen site after consultation. Csdsvtmalspfx Afnjpu Included is the original chip conveyor and a bar loading magazine from FMB 3-36 turbo Includes Büchele SFB-301 high-pressure system 150 bar 4 valves

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table length: 3,500 mm, total height: 4,164 mm, total width: 5,875 mm, total length: 9,120 mm, rotational speed (max.): 6,000 rpm, workpiece weight (max.): 8,000 kg, overall weight: 29,000 kg, torque: 760 Nm, ACCESSORIES Cooling / Coolan System Sí / Yes Internal Cooling / Coolan Through Spindle Yes / Yes Handwheel / Handwheel Yes / Yes Heidenhain Tool Probe / Tool Probe Heidenhain Yes / Yes Preparation for Renishaw Touch Probe / Preparation Renishaw Touch Probe Yes / Yes Cjdpeulwy Aefx Afnspu Integral Splash Guard / Integral Splash Guard Yes / Yes Chip Conveyor (2 Augers + 1 Lateral hinge) / Chip Conveyor (2 Chip Augers + Lateral 1) Yes / Yes Automatic Tool Changer / ATC Yes / Yes (24 tools / tools)

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, working width: 1,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, total length: 2,210 mm, total width: 1,530 mm, total height: 1,940 mm, overall weight: 1,200 kg, input voltage: 400 V, workpiece height (max.): 50 mm, power: 6 kW (8.16 HP), input current: 18 A, Edge rounding up to 1100mm width. Ideal for edge rounding of light burrs up to 1100 mm working width. The DM1100 C performs edge rounding and removes sharp edges on both the outer and inner contours of stainless steel, steel or aluminum parts that have been cut in either a laser, shearing or punching machine. This machine processes parts of various dimensions, including products as small as 50x50mm. The DM1100 C has a station with double cross belts for edge rounding and leaves clean, smooth and burr-free edges on the complete parts. DM1100 C Working capacity (mm) 1100x50 No. of cross belt stations 1 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Cross conveyor motor (kW) (2x) 3 Feed motor (kW) 0.18 Cpsdstzfntspfx Afnju Total power (kW) 6 Power consumption (A) 18 Rod suction connection per head (Ø mm) 150 Dimensions (mm) 2213x1530x1940 Weight (kg) 1200

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical specifications: X travel: 3708 mm Y travel: 1208 mm Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Feed range: 6–5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Cpodjwtpfpjpfx Afnju Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request.

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Cpodpfx Aouqackefnsu

Condition: good (used), Year of construction: 2008, Parts shown by hand not included. Cedpfx Afeuc Tpgenepu 12.000 rpm X 610 mm Y 420 mm Z 450 mm

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: 3815407, WEIGHT 8000KG Cjdpfx Aet Nhqysfnepu FEM ISO 1Am M4 KW 2.4/15.5 ( 50 Hz) MAXIMUM CAPACITY 16 TON

Condition: new, functionality: fully functional, machine/vehicle number: NEW-5, empty load weight: 734 kg, maximum load weight: 2,766 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,840 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, Year of construction: 2025, brakes: other, New series! Rear tipper with standard electric tipping function and low loading height, braked tandem high-bed trailer with all-round foldable and removable aluminum drop sides, welded, hot-dip galvanized steel frame, wooden floor covered with steel plate, lashing points on the sides of the floor in a V-groove, automatic jockey wheel, 13-pin electrical system with reversing light, low chassis. Cjdpoghpc Nofx Afnepu Plus freight to Gera and vehicle registration document €250 net. Optional accessories available at extra charge: mesh sides, tarpaulin and frame, 100 km/h equipment, integrated loading ramps, support stands, etc. Delivery available at extra cost! Financing / leasing possible. Pictures are for illustration only, some shown with optional accessories at extra charge!

Condition: like new (used), Year of construction: 2019, operating hours: 13,000 h, functionality: fully functional, Machine: Mazak Quick Turn 200 MSY with bar feeder / loading magazine Year of manufacture: 2019 The machine has already been packed for shipment to Taiwan according to the highest standards for international sea freight. A demonstration by a Mazak electromechanical technician is possible at any time; in that case, we would simply need to unpack the machine on site again. The machine is currently located at a factory of a now-closed facility in Baden Württemberg. Inspection appointments: Calendar week 10. Control: Mazatrol SmoothG Max. turning diameter: 695 mm Max. swing diameter: 575 mm Distance between the chucks (both spindles): 575 mm Travel distances X-axis: 234 mm Y-axis: 100 mm Z-axis: 575 mm W-axis: 585 mm Rapid traverse X/Y/Z/W: 30/21/33/30 m/min Main spindle Drive power: 26 kW Max. spindle speed: 5,000 rpm Spindle nose: A2-6 Spindle bore: 76 mm Max. bar capacity: 65 mm Sub spindle Drive power: 11 kW Max. spindle speed: 6,000 rpm Turret 12 tool stations (VDI type) 12 driven stations Milling drive power: 5.5 kW Max. speed: 5,000 rpm Additional options / equipment Tooleye Parts catcher Csdpoygbcfjfx Afnjpu Interface for bar feeder C-axis on main and sub spindle Coolant supply through sub spindle Air at the turret Engraving function Cylindrical interpolation Clamping force control Thread re-cutting function Preparation for oil mist extraction Mahle coolant filter Chip conveyor (Mayfran) High-pressure pump 15 bar

Condition: used, Technical details: grinding length: 12000 mm grinding width: 2800 mm workpiece height: 2510 mm max. workpiece weight: 24.000 kg table surface area: 11990 x 2500 mm distance between columns: 2820 mm cross rail adjustment: 2510 mm table feed: 1 - 40 m/min total power requirement: 110 kW weight of the machine ca.: 151 t dimensions of the machine ca.: 32,5 x 9 x 6,73 m .....machine is in top condition for high precision work! Cpsdpfxjwc A Sns Afnsu with CNC SIEMENS 840 D 1 universal grinding head, 22 kW swivelling of the grinding spindle +/-110° grinding wheel dimension 700 x 130 mm vertical stroke 1000 mm with dressing unit 1 surface grinding head, 30 kW grinding wheel dimension 600 x 150 mm vertical stroke 230 mm with dressing unit coolant and filtering unit diverse grinding wheel flanges *