Used Cross Belt Sanders for sale (16,856)

Condition: new, 2000 kg height 500 mm width 2000 mm nein 2000 x 100 mm 2,0 x 0,53 x 0,5 m Gujdpfx Aog Td Tgjacsh

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Gedpfju Tg I Dsx Aacouh Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: ready for operation (used), functionality: fully functional, A good used Hopper Feeder fopr feeding small parts into assembly machine or feeding a bowl feeder with bulk parts - stainless steel conveyor - flighted belt (comes with a second spare belt also) - three phase geared drive unit - 24 V DC sensors (2) for control of belt index if required Ready to ship worldwide More pictures and videos available upon request Gusdpfx Aew D Ev Ejacjh

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Godpfx Aaefv Hphocsuh Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Accuracy of vertical line at 3 m +-0.75 mm Number of laser lines: 2 Weight: 485 g Guodpfjd Ecncox Aacsh

Condition: used, trough conveyor belt conveyor belt with high load capacity Godpfet Aagyox Aacouh total length: 1000cm tape width: 80 cm total width: 122cm steel tube frame structure. steel guide rollers strap thickness: 0.8 cm drive: currently not equipped "If required, we can add a geared motor.

Condition: new, 3000 mm Working width 600 mm Wheel width 600 mm roll diameter 90 mm number of rolls 12 Stck. work height max. 800 - 950 mm Colour blau / rot weight 200 kg - straight version - stable construction - high load-stable stability - Height-adjustable feet Gusdpfxeuap S Ss Aaceh

Condition: good (used), 1 x Spray Glazer belt width 160mm Total length 940mm Gjdpewp Inhefx Aaceuh 70mm clearance for product

Year of construction: 2025, condition: used, New: No Empty weight: 500 kg Gsdpfx Aaexmhr Ejcjuh Auction item. Broom in working condition. Sold as seen in photos.

Condition: good (used), Dimensions belt: 2.960 length, 600 width, 1.030 heighth. Gedpstu Hhxsfx Aacjuh

Condition: used, Belt Conveyor 000778 - Total Length: 7, 4 m - Work length: 6 m - Total Width: 1, 1 m Gsdpfx Aotrxd Soacsuh - Belt width: 290 mm - electric motor: 3 kW

Condition: used, New: Yes Empty weight: 3 kg Length: 900 cm More available. Rodenrijseweg 459, 2651AN Berkel en Rodenrijs, the Netherlands. Gedpfx Aaonl Dp Aocjuh

Condition: new, cutting diameter 220 mm saw band length 2450 mm cutting width 250 mm cutting speed 40 / 80 m/min dimensions of saw-band 2450 x 27 x 0,9 mm Guedpfx Aaolb I A Sjceh 100 mm 90 mm 90 x 90 mm 160 mm 160 x 110 mm 250 x 190 mm total power requirement 0,75 / 1,1 kW table height 925 mm weight of the machine ca. 218 kg dimensions of the machine ca. 1300 x 700 x 1530 mm

Condition: used, Fire basket, fire basket, fireplace, fire bowl -Square -Material: steel Gusdpfx Aaob Tgr Soceh -painted: black -Number: 2 baskets available -Price: per piece -Dimensions: 500/500/H560 mm -Weight: 22 kg

Condition: new, length 2000 mm width 700 mm work height max. 900 mm dimensions of the machine ca. 2,0 x 0,7 x 0,9 m Workbench - Made in Germany Guedpfxjgvqznj Aacsh Industrial quality, particularly robust and durable design for the highest Expectations! Workbench top 45 mm thick made of high-quality multiplex beech 3 drawers on the left Right 1 drawer with 1 large compartment Middle open compartment Painting: RAL 5010 blue, RAL 6011 green, RAL 7016 anthracite gray

Condition: used, Fire basket, fire basket, fireplace, fire bowl, -Round -Material: steel -painted: black -Number: several baskets available -Diameter above: 600 mm Gsdpfx Aaeb Tgr Tocjuh -Diameter below: 380 mm -Price: per piece -Dimensions: 600/H380 mm -Weight: 16 kg

Condition: new, carrying capacity 1400 kg dimensions 1690 x 950 x 1700 mm *While stocks last* 4x hinges the pallet frames are foldable Weight: approx. 9.5 kg for 1200x800x200 mm Godpfx Aett Eczeaceuh

Condition: used, Fire basket, fire basket, fireplace, fire bowl, Gsdpfxjb Tgr Us Aacjuh -Triangle -Material: steel -painted: black -Number: several baskets available -Price: per piece -Dimensions: 570/570/H570 mm -Weight: 18 kg

Condition: new, 2000 mm Working width 600 mm Wheel width 600 mm roll diameter 90 mm Gsdjtycqkopfx Aaceuh number of rolls 8 Stck. work height max. 800 - 950 mm Colour blau / rot weight 150 kg

Condition: new, 3000 mm Working width 400 mm Gsdjp S Ddfspfx Aacjuh Wheel width 400 mm roll diameter 60 mm number of rolls 12 Stck. work height max. 810 - 910 mm

Condition: new, Technical specifications: Material Thickness: 2mm Internal dimensions LxWxH: 120 x 61 x 58 cm Useful volume: 420 liters External dimensions LxWxH: 122 x 61.5 x 70 cm Height (unfolded): 123 cm Drill Pattern Spacing - Large Hole (25mm): 40" x 18". Drill Pattern Spacing - Small Hole (12mm): 8.4 x 8.4 cm Stacking fork mounts: W12 x H8.5 cm Weight: 60kg Guedet U Sckjpfx Aacjh

Condition: new, 15000 kg height 790 - 1150 mm width 1200 mm Guedoqvq Txopfx Aaceh ja 790 - 1150 mm 120 x 1200 mm Support stand, assembly stand, steel stand, welding table, assembly table, steel trestle, work trestle - Our jack stands are characterized by their stable construction, high load-stable stability and indestructible service life. - galvanized - CE marking - Transport on request

Condition: new, weight max. in kg 2100 kg Gjdpfstrhn Dsx Aaceuh dimensions 1750 x 950 x 1600 mm *While stocks last* 4x hinges the pallet frames are foldable Weight: approx. 9.5 kg for 1200x800x200 mm

Condition: new, weight max. 1 t clamping width 810 mm Colour 7016 RAL length 1210 mm width 810 mm height 590 mm gear diameter 175 mm dimensions of the machine ca. 1370 x 840 x 605 mm Robust pallet trolley for the safe and easy transport of pallets in workshops, warehouses or factories -Made in Germany. - Four catch corners prevent the load from slipping during transport. - The pallet chassis is easy to move thanks to the castors Gjdpfx Ajr I E Hgeacsuh maneuver. The transport can be carried out with low rolling resistance will.

Condition: new, 3000 mm Guedotv Rf Uopfx Aacjh Working width 600 mm Wheel width 600 mm roll diameter 90 mm number of rolls 12 Stck. work height max. 660 - 815 mm Colour blau / rot weight 200 kg - straight version - stable construction - high load-stable stability - Height-adjustable feet