Used Suction Belt for sale (11,474)

Year of construction: 2020, condition: as good as new (ex-display), High performance Belt grinding device height adjustable 0-90°. Maximum usable face grinding area Belt adjustment with fine adjustment Longitudinal stop for material guide Perfectly balanced and low vibration Connection on both sides for dust extraction Ø 50 mm Motor protection switch with undervoltage release Fixed stop Csdpoiiywzefx Ac Tsrg 1 Sanding belt standard (brown), grit 80 1 grinding wheel 250 x 40 x 51 mm, grit 80 Spark protection Connection cable with CEE plug with base frame, integrated suction and brake Also other models available from stock! Inquire about the current stock.

Condition: ready for operation (used), Tested and working well - inclined belt conveyor - hi grip belting - robust construction Crodpfezw Avtjx Ac Tjg

Condition: good (used), Saxon Bag Sealer Stainless Steel Credpfsv Dm Dlsx Ac Tjg With Stainless Steel Conveyor 230 Volts Single Phase Power Height adjustable mast Mobile on castors Fixed adjustable feet also Conveyor belt dimensions 1500mm L x 400mm W Price € 5,950

Condition: used, No. 10019 Various conveyor belts Used Consisting of 6 positions Pos. 1: Blue conveyor belt, approx. 8000 x 800 mm LW, was used for waste Pos. 2: Orange conveyor belt, approx. 12000 x 1200 mm LW, as good as new Pos. 4: Two blue mobile conveyor belts, each approx. 10000 x 800 mm LW Pos. 5: Two turquoise conveyor belts, 1st belt approx. 10000 x 1600 mm LW, 2nd belt approx. 4500 x 1400 mm LW, very solid - with sheet metal floor, new motor and gearbox required Pos. 6: Blue Westeria conveyor belt, approx. 14000 x 1200 mm LW Pos. 8: Green mobile Z conveyor belt, approx. 7000 x 500 mm LW, new belt, as good as new Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Cedpfjwhp H Njx Ac Tsrg Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 400 mm, total length: 3,100 mm, total width: 550 mm, total height: 900 mm, overall weight: 80 kg, power: 0.18 kW (0.24 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 3 A, Equipment: type plate available, Aluminum frame conveyor belt 310x40cm 8m/min speed sorting belt conveyor mobile aluminum frame horizontal conveyor belt for sale in excellent condition length: 3100mm belt width: 400mm full width: 480mm speed: 8meters/min drive: geared motor 0.18kw 50Hz belt material rubber fabric green color. frame material aluminum profile. height: 820mm adjustable/tilting legs Cjdpfoydp Tgex Ac Tjrg braked wheels.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, conveyor belt length: 4,450 mm, conveyor belt width: 600 mm, total length: 4,500 mm, total width: 800 mm, total height: 600 mm, overall weight: 550 kg, discharge height: 3,000 mm, power: 1.1 kW (1.50 HP), type of input current: three-phase, input frequency: 50 Hz, 371 conveyor belt 445x60cm paddle conveyor belt High performance paddle conveyor belt for sale in excellent condition length: 445cm speed: 18-21 meters/minute belt width: 60cm total width: 80cm belt paddle height 8 cm belt tray size: 52x29x8cm stainless steel cover steel frame drive: geared motor 380/220v 50hz 1.1kw weight: ca 550kg Cedpfxjygcups Ac Torg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much! Crsdpfxjzw Apgj Ac Tog

Condition: ready for operation (used), functionality: fully functional, A good used Hopper Feeder fopr feeding small parts into assembly machine or feeding a bowl feeder with bulk parts - stainless steel conveyor - flighted belt (comes with a second spare belt also) - three phase geared drive unit - 24 V DC sensors (2) for control of belt index if required Ready to ship worldwide More pictures and videos available upon request Cjdpsw D Ev Ejfx Ac Tsrg

Condition: excellent (used), Year of construction: 2010, I sell the set of 3pcs. Grecon Dimter belt conveyor suitable for Industry use, for example wooden industry, material manipulation etc. Total length 2,00m Band width 300mm Feeding with electric motor 0,37kW / 0,55HP Crsdpfxot Rt I Hs Ac Tog Fully working. Available immediately.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 99.125.681, working width: 1,100 mm, overall weight: 2,500 kg, grinding belt length: 1,890 mm, grinding belt width: 1,110 mm, Equipment: CE marking, TECHNICAL DETAILS Number of units: 2 Unit 1 Position: Top Unit type: Contact roller Sanding belt length: 1,890 mm Sanding belt width: 1,110 mm Roller diameter: 175 mm Roller material: Rubber Motor power: 18.5 kW Unit 2 Position: Top Unit type: Contact roller Sanding belt length: 1,890 mm Sanding belt width: 1,110 mm Roller diameter: 175 mm Roller material: Rubber Motor power: 18.5 kW Max. working width: 1,100 mm Min. working height: 30 mm Max. working height: 183 mm Infeed table length: 400 mm Outfeed table length: 250 mm Crjdpezxcmzjfx Ac Tsg MACHINE DETAILS Feed motor power: 0.75 kW Voltage: 380 V Current consumption: 36 A Fusing: 63 A Dimensions & Weight Dimensions (L x W x H): 1,700 x 1,800 x 2,320 mm Unladen weight: 2,500 kg Number of transport packages: 1 EQUIPMENT CE marking

Condition: used, functionality: unexamined, Year of construction: 1995, total length: 116,000 mm, overall weight: 21,000 kg, Used belt conveyor length approx. 116mtrs. Includes: -10pcs of 9mtr + 1pc of 4m + 1pc of 12m modules -Tail/loading section, needs some re-conditioning - Drive station -Tripper unit, it can travel approx 100mtrs along the conveyor operated by winch + steel cable (not included) and discharges material to both sides of conveyor -Counter weight tensioning station -1000mm EP400/3 4+2 conveyor belt -Siemens motor 37kW + Kumera gear -Roxon belt cleaners. -Hanging square tubing, hangers at 3m pitch -Has been dismantled form bolt-joints -All drums + drive motor/gear spinning freely, not stucked Cedpozkkmaofx Ac Tsrg

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Crjdpfjx Twcpox Ac Tog

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Cedpfxozvnfwo Ac Tjrg Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Condition: used, trough conveyor belt conveyor belt with high load capacity Cjdpfxet Aagyj Ac Terg total length: 1000cm tape width: 80 cm total width: 122cm steel tube frame structure. steel guide rollers strap thickness: 0.8 cm drive: currently not equipped "If required, we can add a geared motor.

Condition: used, Year of construction: 2016, Working width: 950 mm Min height of processed material: 3 mm Max height of processed material: 160 mm Sanding belt size: 950x1900 mm Sanding belt speed: 18 m/s Feeding belt speed: 4.5/9 m/min Air consumption: 20/180 L/min Crjdpfx Aozd Uzzjc Teg Air pressure: 5.5 bar Air pressure for blowing off the sanding belt: 8 bar Extraction port diameter: 150 mm Main engine power: 7.5 kW Power: 400V Overall dimensions: Length: 1400mm Width: 1520mm Height: 1800mm

Condition: excellent (used), Year of construction: 2012, Used Stadler Bunker Hopper Year 2012 Measures 10M Long x 2M Wide x 3M High The Sides Could Be Removed To Leave Only The Conveyor Csdpfxezqvdqo Ac Torg Excellent Condition Electric Motor / Gearbox Drive

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: 01810, 7 Face grinding supports 2 Top chamfering tools 2 Bottom chamfering tools 1 Water groove milling support 1 Milling support Infeed and outfeed roller conveyor Belt running direction: left to right Cjdpjzy Eh Refx Ac Terg Water trough

Condition: good (used), Year of construction: 2009, operating hours: 2,500 h, functionality: fully functional, We are offering this used Costa Delta TRI-T-T 1350 wide belt sanding machine, manufactured in 2009. Crjdezx Tgrspfx Ac Teg The machine has only 2500 operating hours and is in good condition. Further details can be found in the data sheet. If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Year of construction: 2015, machine/vehicle number: MB536013A, functionality: fully functional, power: 28 kW (38.07 HP), input voltage: 400 V, input current: 54 A, input frequency: 50 Hz, overall weight: 2,800 kg, We are offering this used COSTA MD5CC 1350 belt grinding machine, manufactured in 2015. Model: MD5CC 1350 Serial number: MB536013A Voltage: 400 V Frequency: 50 Hz Power: 28 kW Current: 54 A Crsdpfezlcipsx Ac Tjg Year of manufacture: 2015 Total weight: 2800 kg If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Year of construction: 2012, functionality: fully functional, Equipment: type plate available, The Donaldson Torit dust extraction unit DFO 4-16 can be used for welding, cutting, and grinding. It is a non-ATEX unit. Crsdezwclzopfx Ac Tog The accompanying fan is an ART 632 with a 22 kW motor (non-ATEX), designed for a flow rate of 16,500 m3/h. It was previously used in one of our factories for welding fume extraction. It has since been replaced by dilution systems and is therefore no longer needed.

Year of construction: 2023, condition: used, Empty weight: 2.850 kg Dimensions (LxBxH): 203 x 247 x 209 cm Working height: 90 cm Serial number: FTR-15-1507 Power: 400 V/50 Hz Current: 32 A Power: 16 kW Maximum workpiece width: 1,500 mm Maximum height: 170 mm Crodpfjzyq Ivjx Ac Teg Minimum height: 0.6 mm Conveyor belt speed: 0.3 to 10 m/min Controls: touchscreen Machine dimensions: 2,037 x 2,478 x 2,090 mm Conveyor working height: 900 mm Weight: 2,850 kg Hour meter: 2,989 New price in 2023 (documented, from administration): EUR 191.500 Online auction of modern and very well maintained metalworking machines (e.g. 2023 BYSTRONIC BYSMART FIBER 3015 10kW laser incl. tower- and sheet storage modules complete, 2x 2023 BYSTRONIC XPERT PRO press brakes, 3x 2023 VALK WELDING incl. PANASONIC welding robots, Q-FIN deburring and finishing, KASTO automatic saws, SIEGMUND welding clamping tables, HAAS machine tools etc.), previously in use at Lemken, the well-known manufacturer of agricultural equipment - including plows and seeders - in Dinteloord, The Netherlands, due to the relocation of the manufacturing. The online auction opens Thursday 3 September and closes Thursday 8 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 6 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, machine/vehicle number: AE00003516, grinding width: 1,370 mm, overall weight: 1,800 kg, grinding height: 170 mm, workpiece height (max.): 170 mm, workpiece width (max.): 1,350 mm, - Wide-belt sanding machine DMC SD 70 RCS 135 - DMC SD 70 model, RCS 135 version Crsdpfxozydafe Ac Teg First "R" unit with roller and second "CS" combination unit with roller/sanding pad - Working width mm 1,350 Min./Max. working height mm 4-170 Sanding belt dimensions mm 1,370x2,620 Main motor power kW (HP) 11 (15) Feed rate m/min 4.5/9 - 160/85 rubber-coated calibrating roller, diameter 160 mm, 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Sh - 2nd position - Hard sanding pad with manual adjustment of the working height - Motor power, 1 unit: 11 kW (15 HP) - Electronic ammeter for the main motor to display current draw - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection at the infeed before the first unit - Rubber feed carpet, 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering

Condition: used, Year of construction: 2024, functionality: fully functional, The bunker conveyor belt from Lange Fördersysteme is for sale; it was previously used in a company that manufactures medical products. Conveyor belt length: 2200 mm Crsdszyrt Tepfx Ac Tog Discharge height: 2450 mm Usable width: 170 mm Mounted on adjustable feet within an aluminum frame. White belt with 30 mm high cleats spaced 145 mm apart. Bunker: L: 1300 mm x W: 800 mm x D: 700 mm, covered with a Makrolon sheet. Base frame: L: 1500 mm x W: 900 mm Connection via Harting connector.

Condition: good (used), APPLICATION BELT with VIBRATING feeder Used machine Cedpfotp Hd Ujx Ac Torg A pneumatic slide valve from the vibro-feeding roller controls the dosing onto the application belt Overall dimensions: 2700 x 1300 x 2800 mm Strap size 2400 x 140 mm Throat size: 1000 x 1300 mm Transport speed: 15 m/min

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide-belt sanding machine with electronic segmented sanding pad and finish sanding. Ideal sanding machine for interior finishing companies, also suitable for intermediate sanding before painting. Edge sanding machine with combination unit and electronic segmented pressure bar, edge segments can be switched on and off. Segment width of the pressure bar 35mm. Contact roller pneumatically adjustable, low wear due to ribbed steel roller. Grain size compensation. Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s. Belt feed steplessly adjustable via frequency inverter from 2.5 - 13 m/min. Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the outlet. Constant working height of 900mm by adjusting the top part of the machine, thus also integrable into sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340mm. Workpiece height approx. 3 to 150mm. Common sanding belt dimension 1360 x 1900mm. 3 rubberized pressure rollers. Infeed roller table and foldable outlet table. Preparation for vacuum blower. The belt is perforated and connectors for optional blower are available. Alternatively, the belt can also be connected to the extraction system. Crsdpezqvmrefx Ac Tog Extraction connection 1 x 200mm, 1 x 140mm and 2 x 100mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar engagement points at the front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Operating manual. Without the illustrated connection cable. Original paint, only retouched in places. Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg. The machine can be demonstrated on-site after prior arrangement. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".