Used Cross Belt Sanders for sale (13,480)

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, grinding width: 1,350 mm, SCM Wide Belt Calibration and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical Specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position - Hard sanding pad with manual working height adjustment - Motor power for unit 1: 11 kW (15 HP) - Electronic ammeter for main motor indicating current draw Iedpfotwqn Sjx Am Ijia - Electronic work height display - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before first unit - 60 Shore rubber feed belt - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds 4.5 / 9 m/min driven by gear motor - Automatic belt centering Including the following special accessories: 1 pc. version "B" for RCS with: pneumatic on/off for roller 1st unit “R” + pneumatic on/off for roller 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic working height adjustment 1 pc. CE safety standards 1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" diagonally grooved steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. abrasive belt wear optimizer 1 pc. LED interior lighting 1 pc. door with viewing window on rear side 1 pc. Logic SC control

Condition: new, Scantool industrial belt sander 150 x 2000 Sanding belt 150 x 2000 mm Working width: - 150 mm motor: - 4,8 PS Speed: - 34 m/sec. Table height: - 475 to 1240 mm sanding belt dimension: - 150 x 2000 mm surface grinding area: - 530 mm Weight: - 100 kg The industrial belt grinder models Scantool 75 x 2000 and 150 x 2000 are high performance quality machines built according to the strictest environmental and safety regulations. The belt grinders are equipped as standard with motor brake, adjustable working height, eye protection, angle stop and motor protection switch with zero voltage release. Iijdpfx Amsgk Al Se Iea zero voltage release. The low-noise machine with CE mark is ideal for grinding all metals. Motor protection switch with zero-voltage release Separate emergency stop Motor brake Adjustable angle stop Eye protection The infinitely adjustable working height enables an ergonomically correct working position Perfect design for fast, effective and safe grinding Self-adjusting belt tension Danish top quality

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 5,500 kg, compressed air connection: 6 bar, table length: 1,600 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 4,000 mm, workpiece length (max.): 1,500 mm, Used TIMESAVERS Model 42-Series-1600-WWB -- LIKE NEW -- For grinding and satin finishing stainless steel sheet surfaces. Wide belt sanding machine featuring two top-mounted wide belt sanding units and one brush unit. This is a dry-operating machine equipped with a Wandres production cleaning brush. Please note: The roller table shown in the gallery image is NOT included with the above-mentioned machine! Technical Data: Year of manufacture: 2021 Minimum workpiece dimensions: 750 mm x 1000 mm x 2 mm Maximum workpiece dimensions: 4000 mm x 1500 mm x 6 mm Abrasive belt dimensions (W x L): 1630 x 2620 mm Table opening: 2-100 mm Adjustment accuracy: 0.01 mm Flat feed belt Feed speed: 4-20 m/min Electrical: Main motor 1st unit, frequency controlled: 22 kW Main motor 2nd unit, frequency controlled: 22 kW Main motor 3rd unit, frequency controlled: 15 kW Feed motor: 3 kW Electrical connection: 400 V Frequency: 50 Hz Compressed air: Required air pressure: 6 bar Air consumption per unit: 30 l/min Wandres air consumption: 235 l/min Dust extraction PER unit: Required capacity at 125 mm water column: 10,000 m³/h Wandres brush: 600 m³/h Machine weight: 5,500 kg Ijdpfjq Tp H Hjx Am Ijia Extraction and/or on-site installation services can be offered upon request. Please note: The roller table shown in the gallery image is NOT included with the above-mentioned machine!

Condition: good (used), Code: 0312 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TAG 11 - Norme CE Automatic calibrating sanding machine with 2 belts and movable head for furniture, carpentry, custom-made furnishings, panels, solid wood, tables, composite materials and various - CE Standard Steel enblock Conveyor plane provided with a thick rectified steel structure Sanding belt motors placed inside the base Rubber conveyor belts structured in 3 cloths and sectionated in rings for constant centering on the plane Base with thickness sheet up to 30 mm Movable head using big lifting columns Technical data: Working width 1350 mm Working thickness 3-130 mm Fixed working surface height 900 mm Feed speed from 5 to 30 mt/min Isdpfx Amsynk Dno Isia Belt dimensions 1400 x 2620 mm Working thickness display Composition: 1° Group Steel Calibrating Roller diameter 280 2° Group Rubber Sanding Roller diameter 300 Cleaning brush - Motor 2 Hp - Suction inlet diameter 160 Total power 57 kW Compressed air 7-8 bar Overall dimensions mm 2100 x 2300 x 2400 h Weight kg 5500

Condition: excellent (used), Year of construction: 2000, For sale is a well-maintained SCM Sandya 5 CS wide belt sander. This machine is in perfect working condition and can be inspected and tested on site. Sale is on behalf of a customer. Iiedpfjymgd Usx Am Ioa Machine details: Sanding width: 1100mm Year of manufacture: 2000 Main motor: approx. 15kW Max. working height: approx. 160mm Net weight: 1046kg Includes spare sanding belts, spare drive belt, and operating manual.

Condition: like new (used), Year of construction: 2017, operating hours: 108 h, functionality: fully functional, working width: 1,650 mm, power: 370 kW (503.06 HP), type of input current: three-phase, workpiece height (max.): 160 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,650 mm, space requirement length: 7,660 mm, COSTA LEVIGATRICI 1650 CALIBRATOR/SANDING MACHINE This machine is in really new condition with only approximately 100 hours of operation. It is fully functional and operates without any issues. Technical Specifications * Machine Type: Automatic sanding / calibration line * Working Width: 1650 mm * Feed System: Motorized conveyor belt with variable speed control * Working thickness: 3 to 160 mm Lower Section: * 3 sanding steel roller units * 1 finishing pad unit * Cleaning system with blowers and brushes Upper Section: * 3 sanding steel roller units * 1 finishing pad unit * Cleaning system with blowers and brushes Unit Power: * From 18.75 kW up to 75 kW (depending on the unit) Iedpfx Amsyt H Dno Ioia Control System: * PLC control with touchscreen interface Safety: * Safety sensors * Emergency stop system

Condition: as good as new (ex-display), functionality: fully functional, grinding height: 200 mm, power: 11.03 kW (15.00 HP), grinding belt speed: 18,000 mm/s, grinding belt length: 2,620 mm, grinding belt width: 1,370 mm, input frequency: 50 Hz, input voltage: 400 V, Additional technical data Feed speed: 2.8 - 20 m/min The new Format4 findustry wide belt sanders impress in industrial applications primarily through their individually configurable assembly of units. Tailored specifically to the application and field of use, the machine can be equipped with two, three, or four units. A high degree of customization guarantees that all requirements in terms of surface finish and processing efficiency are met. Maximum operating comfort in industrial applications The clearly structured touchscreen control panel is intuitive to operate. All machine functions are clearly displayed graphically on the digital display. The pass-through thickness can be set directly from the control panel to a tenth of a millimeter at the touch of a button. Automatic thickness measurement simplifies the adjustment of the machine to the desired workpiece thickness. The workpiece can be measured without additional measuring devices, and its thickness is then transmitted directly to the machine "wirelessly." The fixed infeed table height of 900 mm allows for easy and fatigue-free operation, while a vacuum table, roller table extensions on both infeed and outfeed sides, as well as optional pressure shoes on the sanding units, ensure maximum comfort and optimal processing conditions for workpieces of any size. Optional equipment 10E LACQUER – Cross sanding unit ESC in place of 1st contact roller 20A 2nd contact roller unit 22 2nd sanding roller in 85° Shore 30E LACQUER – Superfinish unit ESC in place of 3rd contact roller 39 Switch contact for slide control (price/piece) *6 51 Soft start for 15kW (20HP motor) Iijdpfxextpydo Am Ija 59B Control unit with 15" color touchscreen display 63 Scotch-Brite brushing device at the machine outfeed 71 Oscillating cleaning blower for workpiece and conveyor belt 72 Ionizing bar at the machine outfeed 73 Vacuum table with 4kW (5.5 HP) blower 74 Inverter for vacuum blower for vacuum adjustment 83 Sanding height 200mm instead of 170mm 84 Optimized control software for special processing 87 ESC workpiece detection sensor with 50 segments 201 2nd motor with 15kW power output Additional information Workpiece height: 3 - 170 mm Constant infeed height - fixed table: 900 mm Grooved sanding roller: Ø 250 mm Including delivery and installation in post code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: as good as new (ex-display), functionality: fully functional, grinding width: 1,100 mm, grinding height: 170 mm, power: 14.71 kW (20.00 HP), grinding belt length: 1,900 mm, grinding belt width: 1,100 mm, input frequency: 50 Hz, input voltage: 400 V, Further technical data: Sanding height: 3 - 170 mm Extraction connection: 200 / 120 mm Standard equipment: Iiedpfx Amsvf D S Aj Iea - Star-delta starter - CE safety standards - Electrically controlled height adjustment of the feed table including fine adjustment from the control panel - Stepless feed speed from 2.5-18 m/min adjustable via inverter from the control panel - Hand guard and workpiece thickness safety device - Endless belt conveyor with honeycomb structure - Automatic feed belt centering - Control unit with 7" touch color display - 1st unit with rubberized, profiled contact roller, 85° Shore hardness - 2nd unit (sanding pad unit): The electro-pneumatic segmented sanding shoe with 25 mm segment width enables the independent processing of multiple workpieces for perfect veneer sanding. The standard time-controlled cleaning blower ensures maximum sanding belt service life, especially for lacquer sanding or very fine grit. - Digital grit compensation - Mechanically preloaded rubber pressure rollers - Sanding belt oscillation, electronic-pneumatic - Electronic sanding belt run-off protection - 1 motor with 15 kW (20 HP) including automatic star-delta start - Min. air pressure (bar): 6 Optional equipment: - Vacuum table with integrated blower in the machine frame - 15 kW (20 HP) motor including variable cutting speed from 2.4 to 19 m/sec - Double-sided roller table extension, 200 mm - Scotch Brite brush unit at the machine outfeed, D=150 mm - Switching contact for slide valve control; shut-off valves for extraction can thus be actuated. Including delivery and installation in postcode areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: ready for operation (used), A two-unit sanding machine Sandingmaster is available. Working width: 1100mm, max. workpiece width: 1000mm, max. workpiece height: 150mm, sanding belt dimensions X/Y: 1130mm/1900mm, feed: 14m/min. Machine dimensions X/Y/Z: approx. 3150mm/1500mm/1900mm, weight: approx. 2500kg. Including approximately 50 sanding belts with different crownings. Documentation available. An on-site inspection is possible. Iedpfx Amoyq R Hhe Isia

Condition: used, Year of construction: 2021, functionality: fully functional, 1. unit steelroller Ø140 mm Iijdpfx Ajym Rl Nsm Isa 2. combi unit - rubberroller and electronic segmented pad, eps system working widt 1100 mm_ working height 3-160 mm - belt size 1900 X 1120 MM total 30 kw - total kg ca. 1900

Condition: used, Year of construction: 2006, 1. Combi aggregat with steel roller and electronic segmented pad working width 1350 mm, motor 15 kw, sandingbelt size 2620 x 1350 mm Iodpfx Amsym Rdrj Isia use full for sanding of Solid wood, veneer, laquer available from march 2026

Condition: used, Year of construction: 2012, functionality: fully functional, working width: 1,100 mm, overall weight: 1,500 kg, power: 11 kW (14.96 HP), grinding belt speed: 18,500 mm/s, type of input current: three-phase, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 5.5 bar, grinding belt width: 1,100 mm, extraction nozzle diameter: 150 mm, input voltage: 400 V, operating pressure: 5 bar, pressure: 5.5 bar, workpiece width (max.): 1,100 mm, pass-through height: 160 mm, We are offering this used BULDOG 7 wide belt sander, year of manufacture 2012. Manufacturer: BULDOG Model: 7 Year: 2012 Condition: used Category ID: 1408 Type ID: 436 Machine type: Wide Belt Sander CE Safety Standard Wide belt sander/milling machine with a working width of 1100 mm The machine is in perfect working condition. The machine has a constant working height, making it ideal for integration into a production line with roller conveyors before and after the machine. Additional features: - Frequency inverter for the feed belt - Automatic feed belt tracking - Pneumatic interval air blasting system with oscillating nozzles for belt cleaning - Guide rails on both sides - Roller conveyors at the infeed and outfeed - Stroke of the shaft: 220 mm, adjustable from 80 mm up to 300 mm - Fixed machine table - Height adjustment via the sanding units - Up to 3 sanding units possible Working area: - Working width: 1,100 mm - Max. workpiece height: 160 mm - Min. workpiece height: 3 mm - Sanding belt length: 2,620 mm - Sanding belt speed: approx. 18.5 m/s - Feed speed: 3-15 m/min (stepless) - Motor power: approx. 11 kW - Power supply: 400 V - Operating pressure: approx. 5.5 bar - Air consumption: 50-300 l/min - Extraction speed: approx. 20 m/s - Extraction connection: 150 mm diameter - Weight: approx. 1,500 kg Applications: - Solid wood - Veneer - MDF/engineered wood panels Iiodpfeyxqdkex Am Isa - Lacquered and filled surfaces Disassembly and collection at buyer's own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, SCM Sandya 3 wide belt sander Working width 950 mm Number of units 2: 1 unit with steel shaft Iodpeyuxbzofx Am Ieia 2 combi unit - rubber shaft + shoe Shoe automatically fitted Oscillation on photocells 2 conveyor belt speeds Belt feed speed 4.5/9 m/min. Motor power 7.5 KW Paper size 1900×970 mm

Condition: excellent (used), Wide Belt Sander SCM Casadei Libra 30 Model – Libra 30 Sanding width: 950 mm Max material height: 170 mm 2 sanding units (1 x steel roller, 1 x combination unit) Finishing pad 15 kW motor, star/delta starting Two feed speeds Electric table adjustment Table position display Iedpfsyv D A Isx Am Isia Oscillation with photocell control The sander is in very good condition, fully operational and ready for work Weight approx. 1100 kg

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, working width: 1,300 mm, workpiece height (max.): 140 mm, controller model: Xinje XD5, empty load weight: 4,500 kg, working length: 200 mm, TECHNICAL DETAILS 1st Station: 15 cup grinding brushes with quick-change mount 2nd Station: 15 cup grinding brushes with quick-change mount 3rd Station: 9 tangentially arranged grinding brushes Ijdpfxex Tt Uus Am Ieia 4th Station: Crosswise roller with grinding brushes over the entire working width 5th Station: Crosswise roller with grinding brushes over the entire working width 6th Station: Air nozzle across the entire working width Working width: 1,300 mm Working length: 200 mm Workpiece height: 3 - 140 mm MACHINE DETAILS Control system: Xinje XD5 Total power requirement: 13.4 kW Dimensions & Weight Required floor space: approx. 5.1 x 2 x 2.3 m Machine weight: approx. 4,500 kg EQUIPMENT Modular control of the module units Frequency converter for speed control Automatic adjustment of working height range Oscillating blowing air in the final section Easy maintenance and replacement of abrasive paper and brushes Spare brushes Grinding inserts Rubber conveyor belt with herringbone pattern, solid steel plate underneath across full width

Condition: used, functionality: fully functional, machine/vehicle number: SA002337, Technical data: Working width: 1135 mm 1 Combination unit Shaft diameter: 210 mm Max height of processed material: 160 mm Sanding belt dimensions: 1135x2200 mm Iedpfxjyn N Dge Am Ioia Electric lifting Digital display Safety switch Main motor power: 11 kW Voltage: 380V Operating pressure 8 bar Adjustable feed speed Overall dimensions: Depth: 1500 mm Width: 1800 mm Height: 2300 mm

Condition: ready for operation (used), Year of construction: 1977, Wide belt sander Bütfering see pictures Machine is immediately available Machine ran until a few days ago without problems in production but was very rarely used Ijdpfxendccte Am Ijia

Condition: excellent (used), functionality: fully functional, Wide belt sander SCM Sandya 10 Working width: 1100 mm Working height: 3–160 mm Number of sanding units: 2 Iiedsyuclwopfx Am Iea 1. Calibrating roller 2. Combi unit with pad CE certificate Main motor power: 11 kW

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide belt sander (wet-type) equipped with 2 top-mounted sanding units and a brush unit (Scotch-Brite). The machine is used for surface processing of metal parts up to 450 mm wide. Iodpfsyn E H Rjx Am Ieia The dust collection container with filter fleece is located underneath. The machine is in good, partially overhauled condition. Further technical information can be found in the documentation.

Condition: excellent (used), Year of construction: 1994, Wide belt sander Manufacturer: Bütfering Type: AWS 2 KC 1100 Year of manufacture: 1994 Working width: 1,100 mm Max. passage height: 150 mm Number of sanding units: 2 Sanding roller power: 15 kW Sanding shoe power: 11 kW Feed power: 1.5 kW Feed: 3 - 15 m/min, continuously adjustable Weight: approx. 3,300 kg Iijdpfxevuza No Am Ioa Dimensions: 1,750 x 2,210 x 2,280 mm

Condition: used, Year of construction: 2009, conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt 2 levels type EZT with guide rollers Iiedpfotrhm Asx Am Isa -Speed: frequency controlled -Drive: 2x SEW Eurodrive -Conveyor belt length: 1400 mm -Belt spacing: 410 mm -Cross carriage: roller spacing 1000 mm -Number: 2x conveyor belt available -Price per piece -Dimensions: 1450/1550/H920 mm -Weight: 358 kg/pc.

Condition: good (used), Year of construction: 1995, Multi-purpose surface sander, paint sander, modular unit, finishing unit, sanding unit, sanding station, belt sander -Max. sanding belt width: 1350 mm -Abrasive belt: oscillating -Drive: 11 kW -Speed: Frequency controlled -Sanding belt dimensions: 2620 x 1350 mm -Max. workpiece clearance height: 140 mm -Sanding belt unit: height-adjustable (conveyor belt fixed height) -Machine dimensions: 2210/2320/H2310 mm Iisdpfxognnbvo Am Ija -Machine weight: 4500 kg

Condition: new, Special offer price for stock goods! Only while stocks last! Price ex stock, plus VAT. Belt grinding machine: Bernardo Type/Model: MS 150 x 2000 S-2 Condition: New belt dimensions: 150 x 2000 mm belt speed: 14,5 / 29 m/sec. contact wheel Ø x W: 200 / 155 mm surface grinding table: 460 x 150 mm Iodpfx Ajb Hhh Dom Ijia suction connection Ø: 100 mm motor output power S1 100%: 2,1 / 2,8 kW motor input power S6 40%: 2,8 / 3,6 kW Voltage: 400 V length: 1080 mm width: 520 mm height: 1000 mm Weight approx.: 85 kg Features: - Standard with 2 speeds, optimal for grinding stainless steel. - Universally applicable for grinding of edges, surfaces and for cylindrical grinding - Graphite coating on the face grinding surface increases the sliding properties of the grinding belt - Constant belt tension due to spring-loaded tensioning device - User-friendly belt change, fast and uncomplicated - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Universally applicable for craft and industry - Large dimensioned plane grinding surface with protective cover - Including fine adjustment for parallel belt run Scope of delivery: - Sanding belt K 80 - Hinged protective disc - Grinding and support table - Workpiece stop - Dust extraction nozzle - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate blanking switch - Base frame Special offer price ex stock Mindelheim, free loading. Art. 05-1249

Condition: used, The BIESSE SAND REGAL 1350 is an industrial wide belt sander designed for calibration and fine sanding of flat components in the furniture and panel production industries. The REGAL series represents a robust production solution suitable for medium to high production volumes. Isdjynb Rfopfx Am Isia The machine features a modular design, allowing for a combination of calibration and finishing operations in a single pass, which significantly increases productivity.

Condition: used, Year of construction: 2012, functionality: fully functional, Grinding unit with contact roller DIAGONAL unit with segmented sanding pads (35 mm segment width) 2 motors with 15 & 11 kW, 400V Pass-through height: 200 mm Constant working height (machine upper section adjustment) Abrasive belt dimensions: 1350 x 2000 mm Automatic thickness adjustment ENORMATIC Iedpfx Aox Eh Svsm Ieia PLC control with touch screen and operating hours counter Machine version for INTERMEDIATE LACQUER SANDING Pneumatic lifting/lowering of the contact roller Vacuum device complete with integrated fan Infinitely variable feed rate via touch screen Infinitely variable sanding belt speed and belt air blow-off on 2nd unit Drive roller for sanding pads rubber-coated Machine dimensions approx. 1,800 x 1,800 x 2,100 mm (LxWxH) Weight approx. 2,800 kg