Used Houfek for sale (22)

Condition: new, Year of construction: 2024, Hoku Houfek long hole drilling machine LLB VD 20 R Top condition - Top machine - Dedsu Agzxopfx Ahuokw Motor 1,5/1,9 kW, Transverse displacement in Y-axis 250 mm, Longitudinal displacement X 340 mm, Vertical displacement z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel drilling device with pitch 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill bit height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, table rotatable +/- 45°, weight approx. 345 kg immediately ex stock 54634 Bitburg Subject to prior sale,

Condition: good (used), Year of construction: 2009, functionality: fully functional, Sanding width 1100mm Dkedpfx Ahjwkuwxjusw Workpiece thickness 3-160mm 2 sanding units 1st unit: Calibration roller 2nd unit: Combination roller-shoe Texturing brush unit

Condition: good (used), Year of construction: 2016, Main drive motor 4hp Sanding belt size 200mm x 3200mm Sanding belt speed 13m/sec. Tiltable work table 0 - 45 degrees [ one side ] Mechanical belt oscillation Mechanical belt tensioning Height adjustable sanding unit Fixed Worktable size 1000 x 400mm [ one side ] Dust extraction hoods on both ends - each 120mm dia Complete with: Additional rear table for sanding on both sides 1000mm x 400mm Dkedpfx Asqzyiyehusw Year - 2016 CE

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width 910 mm upper combination unit lower combination unit two feed speeds belt oscillation Dedpfx Ahsxt Dz Asujkw electronic material thickness setting material thickness gauge Table with vacuum pump on the second unit Year of manufacture: 2009 New conveyor belts installed in 2023

Condition: new, Year of construction: 2024, functionality: fully functional, VD 20 R Slot drilling machine with rotating table, 2.2 kW Basic equipment: 1.1 Work table mm 800x400 1.2 Motor kW 1.5 1.3 Spindle speed rpm 2880 1.4 Max. Slot height above the table mm 160 1.5 Max. Longitudinal travel mm 345 1.6 Max. Transverse travel mm 245 1.7 Spindle stroke mm 160 1.8 Clamping diameter of the tool mm 0-20 1.9 Max. Tool length mm 175 1.10 Clamping eccentric piece 1 1.11 Longitudinal tilting table inclination ° 1.12 Spindle rotation ° 1.13 Rotation of the table ° +/- 45° 1.14 Machine dimensions mm 1500x1100x950 1.15 Machine weight kg 345 Additional equipment installed on this machine: - Suction nozzle - 2nd clamping eccentric - Mechanical dowel drilling device Dkjdpfx Aou Rnw Dshuow - 2 speed motor 1.5/1.9kW 1440/2880 rpm - Mechanical numerical dimension of the spindle height

Condition: new, HOUFEK SPB Buldog 5 RC wide belt sander -Exhibition machine- Includes: - HOUFEK SPB Buldog 5 RC wide belt sander Working width: 1,350 mm Includes: - Grooved steel roller Ø 160 mm HOUFEK Including: - HOUFEK segmenter sanding pad electronically controlled, for width 1,350 mm Dksdpfx Ahsu R Szmouew Sanding pad PS 50 E Includes NC control with 10.1" touchscreen Frequency converter for the sanding unit 3-18m/s Automatic table positioning Two-zone interval blow-off device with Nozzle oscillation for sanding belt cleaning - new exhibition machine -

Condition: used, Year of construction: 2024, machine/vehicle number: DC-2217, Langlochbohrmaschine mit drehendem Tisch • Bohreinheit drehbar • 2 x Exzenterspanner • Höhenanzeige Dksdpfx Aewd U U Djhusw • Mechanische Dübeleinrichtung (16-22-25-32 mm Lochabstand) • 2 Geschwindigkeiten: 1440 / 2880 U/min • Motorleistung 1,5 kW 1.1 Arbeitstisch mm 800x400 1.2 Motor kW 1,5 1.3 Spindeldrehzahl U/min 2880 1.4 Max. Langlochhöhe über dem Tisch mm 160 1.5 Max. Längsarbeitslauf mm 345 1.6 Max. Querarbeitslauf mm 245 1.7 Spindelhub mm 160 1.8 Spanndurchmesser des Werkzeuges mm 0-20 1.9 Max. Werkzeuglänge mm 175 1.10 Spannexzenter Stück 1 1.11 Längskipptischneigung ° 1.12 Spindeldrehung ° 1.13 Drehen des Tisches ° +/- 45° 1.14 Abmessungen der Maschine mm 1500x1100x950 1.15 Maschinengewicht kg 345 P 41 55 Absaugstutzen 1 P 41 25 2. Spannexzenter 1 P 41 20 Mechanische Dübelbohreinrichtung 1 P41 07 2 Geschwindigkeitsmotor 1,5/1,9kW 1440/2880 U/min P41 34 Mechanische nummerische Abmessung der Spindelhöhe

Condition: new, 1. steel roller diameter (mm) 120 2. Rubberized working roller diameter (mm) 160, 455h Dksdpfx Aofhmgcohuow Sanding belt (mm) 1120 x 2200, 1 piece per sanding unit Main engines (kW) 2 x 11 (15 HP) Motorized table stroke - Work piece height (mm) 3 - 160 Automatic star/delta starting of the motor Sanding roller lifting for 1st unit from the front control panel - pneumatic Sanding roller lifting for 2nd unit from the front control panel - pneumatic Pneumatic grinding shoe PL 2 Amperemeter - for measuring the current of the motors of the grinding units Sanding belt oscillation control - with the help of an optoelectronic reader with infrared beam Automatic feed belt centering Table Positioner Electronic measurement of the table position with digital display Frequency converter of the feed belt speed (m/min) 3 - 15 Rubberised pressure rollers Emergency-off pneumatic disc brake of the main engine Mechanical limitation of the maximum chip removal of the workpiece Noise protection Power supply 400 V/50 Hz Machine built to CE power and safety standards Additional equipment on request

Condition: new, Year of construction: 2022, planing width: 800 mm, Electric table lift, two motor speeds 1/6 mm/s Automatic table adjustment to the specified position Feed table - length 1200 mm 1 grooved roller at the input 2 feed rollers at the output Automatic star/delta motor start-up Electromagnetic brake Electronically controlled continuous feed belt speed adjustment from 4 – 19 m/min 4-knife planing roller  150 mm Articulated pressure segments at the input, pressure bar at the output 4-point table attachment Workpiece thickness 3 – 300 mm Extraction nozzle with outlet  180 mm Knife adjustment gauge Noise protection Packaged in PE film as standard Machine built according to CE electrical and safety standards Dkjdpjittnpefx Ahuow Optional equipment: 20 HP (15 kW) motor Articulated grooved feed roller Two relief rollers in the table Two Rubberized exit feed rollers Tersa type milling drum €21,200 net + VAT Price ex Haldensleben

Condition: excellent (used), Working width 650 mm, combination unit with calibration roller and shoe, two feed speeds, belt oscillation, electric table adjustment, material gauge Dksdpfsxp Dtqjx Ahuew

Condition: new, functionality: fully functional, planing width: 530 mm, number of planer blades: 4, Equipment: motor brake, Houfek R 530 surface planer - 400V/50Hz, 5.5 kW (7.5 HP), width 530 mm 1.1 Motor 5.5 kW (7.5 HP), Tersa cutterhead 1.2 Total work table length 3100 mm 1.3 Dimension of the guide ruler 1300x150 mm with tiltable auxiliary ruler 1.4 Planed table 1.5 Upper control panel with ELGO Z60 digital display Electronic adjustment of the take-off 0 - 7 mm Tilt angle of the tiltable ruler 0°- 45° - Digital display Adjustment of the input table inclination (pointed/hollow joint) 1.6 Cover for the SUVAMATIC planing roller 1.7 4-knife planing roller D=120 mm 1.8 Automatic star/delta start of the motor 1.9 Electromagnetic brake 1.10 Suction nozzle with outlet D=150 mm 1.11 Blade setting gauge Djdpfxju Rnqqe Ahuskw 1.12 Voltage 400V/50Hz 1.13 Packed in PE film as standard 1.14 Machine built according to CE power and safety standards

Condition: new, - NEW -Standard equipment:Motor 1.5 kWSpindle speed 2880 rpmMax. Spindle height above the table 160 mmMax. Drilling stroke 345 mmMax. Cross stroke 245 mmSpindle stroke 160 mmDrilling capacity 0-20 mmMax. Tool length 175 mmEccentric clamp 1 pcRotatable machine table 800 x 400 mm /- 45°Pivotable / rotatable drilling unit as optionTiltable machine table as optionMachine dimensions 1500x1100x950 mmMachine weight 345 kgincluded:- Suction nozzle no. P41 55- 2nd clamping eccentric no. P41 25- Dowel drilling device with 4 grid dimensions no. P41 20- Single lever operation- 2 speeds 1.5/1.9 kW 1440/2880 rpm no. P41 07- Digital display of spindle / drilling height no. P41 34 Dedovwflzepfx Ahuskw

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Dsdpfx Ahefxpbmsuskw

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,340 h, functionality: fully functional, machine/vehicle number: SN CJ-42, travel distance X-axis: 3,310 mm, travel distance Y-axis: 1,640 mm, travel distance Z-axis: 759 mm, controller manufacturer: Fanuc, rotational speed (max.): 24,000 rpm, number of axes: 5, 5-axis milling machine with only 1,340 operating hours! TECHNICAL DETAILS Travel X travel: 3,310 mm Y travel: 1,640 mm Z travel: 759 mm Motor data Dkodpfx Ahow Exu Rouow Model: QX-2 10/12 24 63F NC IM Spindle taper: HSK 63F Voltage: 380 V Frequency: 300–800 Hz Max. speed: 24,000 rpm Power: 12 kW Control: Fanuc FS 31i-B5 Stand Alone MACHINE DETAILS Dimensions & weight Dimensions: 4,740 x 2,580 mm Weight: 6 t Operating hours: 1,340 h EQUIPMENT Renishaw touch probe Note: Loading of the machine is available for €3,500.

Condition: new, BULLDOG 3 R 950 is a device designed for professional production plants and for skilled craftsmen. Excellent workmanship is guaranteed to you long trouble-free use and high work safety. The grinder is extremely stable, but above all very efficient. Technical data: Dkjdpfx Aslc Dn Uohuow Working width: 950 mm Min height of processed material: 3 mm Max height of processed material: 160 mm Sanding belt size: 950x1900 mm Sanding belt speed: 18 m/s Feeding belt speed: 4.5/9 m/min Air consumption: 20/180 L/min Air pressure: 5.5 bar Air pressure for blowing off the sanding belt: 8 bar Extraction port diameter: 150 mm Main engine power: 7.5 kW Power: 400V NEW machine Overall dimensions: Length: 1400mm Width: 1520mm Height: 1800mm

Condition: excellent (used), Sanding belt width: 200 mm Variable belt speed control Dimensions of fixed worktable: 1000x400 mm Dimensions of tilting worktable: 1000x350 mm Dedpfxsxnyz Us Ahuekw Mechanical oscillation Power supply: 380 V Motor speed: 1450 rpm Motor power: 3 kW Weight: 550 kg Year: 2007

Condition: new, Year of construction: 2025, functionality: fully functional, planing width: 530 mm, Houfek Planer-thicknesser SC 530 Standard configuration: Motor 5.5 kW (7.5 HP) Total length of planer tables SC 530 – 2,350 mm Simultaneously tilting planer tables Guide fence dimensions 1,300 × 150 mm Fence tilting angle 0°–45° Thicknesser table length – 1,000 mm Manual height adjustment of thicknesser table Mechanical numeric measurement of table position 4-point mounting of thicknesser table Dedjwvaqzopfx Ahuekw Split inlet pressure segments Grooved infeed roller Outfeed roller Min./max. workpiece thickness 3 – 250 mm 4-knife cutterblock D=120 mm Automatic star/delta motor start Feed speeds 6/12 m/min Electromagnetic brake Voltage 400V/50Hz Standard packaging in PE film Machine built according to CE electrical and safety standards Additional equipment (installed on this machine): Motor 7.5 kW (10 HP) for SC 530 Split grooved feed roller Tilting cover for cutterblock Tiltable auxiliary fence Motorised thicknesser table lift with two-speed motor Electronic position measurement of thicknesser table with digital display Cutterblock type "Tersa" for SC 530 mm Planed planer table Planed thicknesser table

Condition: new, The durable planer from the SR series is a machine thanks to which we can adjust the thickness workpiece from the bottom side, the maximum workpiece width is 330/430/530 mm. The high-performance 4 kW motor and the cutting block with four blades ensure high performance quality work and obtaining perfectly straight surfaces. Technical data: Planing width: 530 mm Knife shaft diameter: 120 mm Number of knives: 4 Knife shaft speed: 4700 rpm Tilting guide: 0-45° Total length of the table: 2700 mm Max thickness of the workpiece: 5 mm Extraction port diameter: 150 mm Motor power: 4 kW Engine speed: 2880 rpm Djdpfxslqwwhe Ahuekw NEW machine Overall dimensions: Length: 2760mm Width: 920mm Height: 1130mm

Condition: excellent (used), - Table length: 2200 mm - Table width: 110 mm Dsdpfxsv S Umwo Ahuokw - Motor power: 3 kW - Power supply: 400 V - Belt width: 150 mm - Manual table height adjustment - Safety switch - Inverter – smooth belt speed adjustment - Year: 2007

Condition: new, Year of construction: 2024, functionality: fully functional, working width: 600 mm, brushing unit diameter: 150 mm, height adjustment type: electric, working height: 300 mm, power: 5.5 kW (7.48 HP), Brushing machine Houfek Twingo 600 BB 400V/50Hz, 2x5.5 HP (4 kW), width 600 mm Basic equipment: 1.1 Motor 4 kW (5.5 HP) per B-unit 1.2 Tool turning diameter 120-300 mm, working length 600 mm Dkodpeu Rnb Nefx Ahuow 1.3 Independent height adjustment of the working units 0 - 300 mm 1.4 Fixed table h=900 mm 1.5 Expansion shaft D=40 mm 1.6 Two rubberized pressure rollers on the work unit, height-adjustable 1.7 Electric stroke of the work unit(s) + scale with unit height indicator 1.8 Two feed belt speeds 4.5/9 m/min - replaced by P81 10 1.9 Brush protection cover 1.10 Suction nozzle diameter for unit B and Q D=120 mm 1.11 Machine is not equipped with the tool for 2nd unit 1.12 Voltage 400V/50Hz 1.13 Packed in PE film as standard 1.14 Machine built according to CE power and safety standards Additional equipment installed in this machine: - 2x motor 5.5 kW 7.5 HP - Automatic feed belt centering - Frequency converter for feed belt speed 3 - 15 m/min - Oscillation for one brush unit with the possibility of switching off - 2x return of the main motor (1 unit) (synchronous and counter-rotation possible on both units)

Condition: excellent (used), Technical data: Grinding belt width: 150 mm Dimensions of fixed working table: 1000x400 mm Dimensions of tilting work table: 1000x350 mm Mechanical oscillation Extraction nozzle 2x120mm Power supply: 380 V Motor rotation: 1300 r/min Motor power: 3 kW Dkedpfx Ahju Rmadsujw Overall dimensions: Length: 1,850 mm Width: 1 400 mm Height: 1,350 mm

Condition: like new (used), Table length: 2500 mm Table width: 800 mm Motor power: 3 kW Power supply: 380 V Belt width: 150 mm Dksdpjv Aai Sefx Ahusw Weight: 325 kg