Used Cross Conveyors for sale (14,408)

Condition: good (used), functionality: fully functional, Sturdy, mobile roundwood and timber cross conveyor. Psdpfezum Uujx Ac Ajgt Equipped with 5 chain strands. Electric drive for mobility. Track width 1.60 m.

Condition: used, functionality: fully functional, Well-maintained, inclined cross conveyor from Esterer, originating from a small sawmill. Drive via geared motor. 6 chain strands. Spacing: 2300 mm - 1500 mm - 1200 mm - 1000 mm - 1200 mm. Pgodpfszw Epcex Ac Ast Conveyor length approx. 3000 mm. Chain pitch 80 mm.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Pedpfx Ajzp H R Ejc Aogt Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: used, Robust cross-conveyor for round timber For sale is an extremely robust cross-conveyor for logs, taken from a professional sawmill operation. Features: Psdpszq T Adsfx Ac Aogt Heavy-duty industrial design Double chain conveyor Short conveying distance Fast and reliable transport of round timber to the log carriage Solid and durable steel construction Immediately available The system is in good, functional condition and can be inspected under power by appointment. Please submit a fair and realistic offer.

Condition: used, Cross conveyor, 4-strand Pgjdpfxjzx Eh Uo Ac Aet Conveyor length: 2.3 m Width: 4.2 m Location: Germany, near Lake Chiemsee.

Condition: used, Year of construction: 2014, Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Pjdpfx Acerg Nzqs Aogt Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Cross Conveyor: - total length: 7000 mm Psdsxu E E Eopfx Ac Asgt - total width: 2300 mm - feed motor power: 0.75 kW - trimming saw for material - saw motor power: 2.2 kW - max. saw blade diameter: 350 mm - cutting height: 80 mm

Condition: used, Year of construction: 2014, Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Pedpforg Nzxox Ac Ajgt Your specialist and contact for intralogistics

Year of construction: 2019, condition: like new (used), Board cross conveyor for sale. Six controls. Distance between controls 0.85 m. Width 4, 40m. Length 2.80 m. Drive, motor reducer 1.5 kw. In full working order, after repair. Pgodpfxjnl Dvlo Ac Aot

Condition: used, Year of construction: 2009, conveyor belt, belt conveyor, transport belt, belt conveyor Podpfetrhm Aox Ac Aegt -Manufacturer: Grenzebach, conveyor belt 2 levels type EZT with guide rollers -Speed: frequency controlled -Drive: 2x SEW Eurodrive -Conveyor belt length: 1400 mm -Belt spacing: 410 mm -Cross carriage: roller spacing 1000 mm -Number: 2x conveyor belt available -Price per piece -Dimensions: 1450/1550/H920 mm -Weight: 358 kg/pc.

Year of construction: 2001, condition: good (used), functionality: fully functional, Pinomatic cross conveyor for a planing and sawing line Year of manufacture: 2001 Manufacturer: Pinomatic OY Type: POS 9+10 S/N: P1033 Psdpsv S Hfxefx Ac Ajgt Motor-driven cross conveyor with 7 chain hoists Arm length: 6000mm Cross conveyor width: up to 4000mm (adjustable) Height: 900mm 6 fixed chain hoists 1 adjustable chain hoist Voltage: 230/400VAC

Condition: used, Year of construction: 2014, Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm Pjdpfxerg Nzue Ac Ajgt length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2016, Transnorm roller conveyor ejector GF 4510-1120-1000 RA1854 Make: Transnorm Roller width (RB): 1030 mm, Steel rolls Nominal/outer width (NB): 1050 mm Rolls diameter: 50 mm length: 3715mm Overall height frame: 250 ejector angle: 30° in both sides 7 rows ejector individually controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: with supports (please enquire if required) Pedpfxjk Abhhj Ac Aogt Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Board cross conveyor Length: 8m Electric motor: 1.5 kW Pgsdpfeza Dvzjx Ac Aet

Condition: used, Log handling system for roundwood, 2-strand configuration Conveying length: 5.5 m Pgsdpszx Ed Nsfx Ac Ast Width: 2.8 m Location: Germany, near Lake Chiemsee.

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Stable roller conveyor with hydraulic lifting and lowering cross conveyor. Conveyor length to stop 6.0 m. Total length 7.10 m. Roller length 1,600 mm. Roller diameter 200 mm. Built-in lifting and lowering cross conveyor with 6 chain strands, can be raised and lowered hydraulically. Pgodpfxst A U Dys Ac Ajt Completely re-stored before decommissioning.

Year of construction: 1994, condition: used, Technical data: - Manufacturer: Cefla with cross axle - Type: TN/L - Length: 1740 mm - Belt width: 1.400 mm - Total width: 1.600 mm - Height: 950 mm - Year of manufacture: 1994 - Feed rate approx. 2 - 8 m/min. - FU control for feed rate 50 Hz - Frequency converter required on site - Location: in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW - Voltage fluctuations max. +/- 5% Pgsdpfsya H Hijx Ac Aot - Location: in stock

Year of construction: 1998, condition: used, with powered roller conveyor as a folding table, length 500 mm Technical specifications: - Manufacturer: Celfa - Year 1998 - Model: TTE 2000 - Year of manufacture: 1998 - Working width: 1,300 mm Pjdpfxozgt A Ne Ac Ajgt - Overall width: 1,580 mm - Length: 2,000 mm (1,500 + 500 mm) - Working height: 930 mm ±20 mm - Bar diameter: 25 mm - Chrome-plated bars - Bar spacing: 95 mm - Roller spacing on folding table: 115 mm - Feed speed 2,1 - 12,3 m/min. - Feed speed adjustable, handwheel - Motor power, drive: 0.26 kW Exx-d - Volts / Hz: 400 V / 50 Hz - Feed speed: approx. 5–25 m/min. - Feed via handwheel adjustment - Location: in stock

Year of construction: 2023, condition: new, Heavy-duty log cross conveyor Pgsdpsdzx I Rofx Ac Ajt 4-strand Length approx. 9 m Strand spacing: 1500 mm, 1800 mm, 2300 mm Height: 1500 mm

Condition: used, Transnorm roller conveyor ejector GF1800-600-550 RA2429 Make: Transnorm Roller width (RB): 550 mm, Steel rolls Nominal/outer width (NB): 600 mm length: 3715mm Overall height frame: 130 mm Frame / 300 mm discharge conveyor Rolls diameter: 50 mm Pneumatic control of the rollers 4 rows of discharge rollers including tensioning station for belts Without drive station, please contact us for this Scope of delivery: with supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Pgsdpfx Ajw R Hkcsc Aot For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 1999, Holtec cross conveyor with feed trough . 7 chain strands. Width 15.50 m. Conveyor length 5.0 m. Chain spacing: 3.75 - 4.0 - 2.4 - 1.8 - 1.5 - 1.35 m. Pgodpfordd I Ujx Ac Ast Sturdy chains 125 x 60 x 8 mm. Drive via SEW geared brake motor.

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor Pgedst Hg Hujpfx Ac Ajt With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Hydraulic model support rollers. Drive via geared motor. New bearings. 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors.

Year of construction: 2002, condition: used, - Manufacturer: Elmag Superfici - Type: TT1-30 - With cross carriage wheels Psdex Url Ujpfx Ac Aegt - Length: 3,000 mm - Working width: 1,350 mm - Total width: 1,660 mm - Working height: 900 + - 20 mm - Height adjustable - Location, in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW

Year of construction: 2024, condition: new, Log cross conveyor - Number of chain strands according to customer specifications - length and width according to customer specifications - powerful SEW gear motors Pgodpfx Ajhmp Ibsc Aet - solid pin conveyor chain with gentle rollers

Condition: new, New Curved Conveyor Outer dimensions 2800mm x 1400mm Belt width 200mm approx Complete with control panel Variable speed control Stop / start E - stop Reset facility 230 volts, single phase power Pjdpfx Aez E Nfbjc Aegt