Used Crank Press for sale (12,626)

Condition: excellent (used), Year of construction: 2001, HELMERDING Press Dods Agcdaspfx Acyewd KDH 400/2600/2 Pressing force 4,000 kN Stroke rate 15-60 strokes/min Stroke adjustment 80-250 mm Slide adjustment 175 mm Installation height 550-800 mm Table area 2,500x1,600 mm Slide area 2,500x1,400 mm Pass-through hole in the press table 1,300x800 mm Weight 106,000 kg Lorenz Strip Line EWH 600/150 Strip width 80-600 mm Strip thickness 0.6-6.0 mm Max. coil weight 7,500 kg

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm Djdpfx Aceiidm Njyjwd The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t Maximum load on prism jaw 7.5t Piston stroke 160mm Piston travel 550mm Dimensions and weights Length (product) approx. 1240mm Width/Depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear opening 790mm Maximum installation height 1030mm Dwjdpfsi Amnpex Acyod Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot levers Winch for raising and lowering the table Location: Ex works - available for immediate delivery -

Condition: as good as new (ex-display), Year of construction: 2026, Technical specifications: Laminated panel press from our showroom; Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. Dwjdob Eln Depfx Acyod The machine is in our showroom and can be delivered immediately. Location: available from our warehouse in 54634 Bitburg.

Condition: reconditioned (used), functionality: fully functional, power: 110 kW (149.56 HP), Equipment: documentation/manual, Complete refurbished Amandus Kahl C35-780 pellet press production line Complete production line featuring a fully refurbished Amandus Kahl C35-780 pellet press. The Amandus Kahl C35-780 pellet press has recently undergone a complete overhaul at the Amandus Kahl factory. All documentation for the newly replaced parts is available. An overview of these parts can also be found among the photos. The production line consists of: - Amandus Kahl C35-780 pellet press - New 110 kW electric motor on the pellet press - Electrical control cabinet with emergency stop, including complete electrical documentation - Conveyor belt - Screening and cooling system that screens the pellets and cools them automatically - Hydraulic nut - Roller head in perfect condition - Including electrical wiring - Feed screw that transports the material to the pellet press - Automatic dosing system that measures the amount of pellets for filling, for example, a big bag - 4 extra dies with 6 mm holes - 60 liters of extra synthetic oil Overview of the parts replaced during the overhaul: - 7 new bearings - 2 new wear rings - 1 new air filter - 2 new oil seals - 1 new oil filter - 1 new oil pump - 20 liters of synthetic oil 800/460 - 1 new pressure piece for the main shaft Do you have any questions or would you like to inspect the complete production line? Please feel free to contact me. Sincerely, Danny van Tol Dsdo Agk Riepfx Acyowd Inventtol B.V.

Condition: excellent (used), FOR SALE – INDUSTRIAL HYDRAULIC PRESS, SACK & KIESSELBACH Selling a SACK & KIESSELBACH hydraulic press, workshop identification number AE 7417. Dedj Aggbuopfx Acyjwd This is a robustly built machine, equipped with: • Work table with wedges and support pieces, as seen in the photos. • Control panel with analog gauges. • Separate hydraulic unit with a Siemens motor. • Protective housing around the work area.

Condition: used, Year of manufacture: 2023 Dwedszcmrkspfx Acyod Price: On request - Year: 2023 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Drive system: CNC - Control system brand: Delem - Control system type: DA-66T - Power [kW]: 52.6 - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 240 - Max. working width [mm]: 4100 - Column gap [mm]: 3600 - Throat depth [mm]: 410 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 260 - Crowning system: CNC-controlled - Punch holder: Quick-release - Tools included: Yes - Control type: Delem DA-69T - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, actuation type: hydraulic, controller model: Delem Touch, bending force (max.): 100 t, working width: 3,060 mm, stroke length: 100 mm, overall weight: 7,700 kg, total length: 3,600 mm, total width: 1,650 mm, total height: 2,400 mm, input voltage: 400 V, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, Technical Data Manufacturer: Trumpf Type: TruBend 3100 – B26 Year of Manufacture: 2014 Capacity: 100 t Bending Length: 3060 mm Distance Between Uprights: 3384 mm Stroke Length: 200 mm Dimensions: approx. L 3.6 x W 1.65 x H 2.40 m Weight: 7.7 t Equipment - Controlled axes: X, X1, R, Z1, Z2 - Self-adjusting combined crowning system - Machine control: Multi-Touch Delem - Amada tool clamping system, top and bottom - Work area lighting Dodpfo Agck Sjx Acyjwd - Laser-safe safety light curtain - Control panel with foot pedal - Large tool set All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, Year of construction: 2025, Capacity: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Dodpspfatpjfx Acyowd Container size: 0.38 m³ Power consumption: 4 kW Machine length: 1860 mm Machine width: 890 mm Machine height: 1100 mm Weight: 400 kg

Condition: as good as new (ex-display), Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Noise level: 70 Db Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Dwedou Egp Iopfx Acyjd Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Condition: used, Technical details: pressure: 2 t passage: siehe Text mm stroke: siehe Text mm Djdpfxeu N Ay Ro Acyswd Pressing power: ca. 2 kN 5 pcs abor presses No. 2: throat 105 mm; distance ram-table 95 mm; ram stroke 36 mm; table L:120 x w:140 mm; weight 17 kg; dimesnions L:270 x W:220 x H:420 mm No. 3: throat 90 mm; distance ram-table 190 mm; ram stroke 45 mm; pressure force 3 kN; ram stroke adjustment travel 150 mm via hand wheel; table size : L:120 x W:160 mm; weight 26 kg; dimensions without wooden stand L:235 x B:160 x H:730 mm No. 4: throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel ; table size L:110 x W:160 mm; weight 30 kg; dimesnions without wooden stand L:230 x W:180 x H:700 mm No. 5: throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel; table size L:110 x W:160 mm; weight 30 kg; dimensions without wooden stand L:230 x W:180 x H:700 mm, incl. device No. 7: throat 130 mm; distance ram-table 95 mm; ram stroke 20 mm; parallel clamper guided with 2 bolts with a return spring ; table size L:50 x B:80 mm; weight 17 kg; dimensions L:330 x W:160 x H:380 mm, incl. punch device *

Condition: excellent (used), Figure 1 provided by the manufacturer as an example. Remaining images are original. Manufacturer: Minda Designation: Timper Press V 200 Technical data: Main pressing force from below: Number of press chambers: 2 Maximum lamella width: 270 mm Maximum glue-laminated timber length: up to 18 m Glue-laminated timber profile: straight Lateral alignment of the lamellas: included Pressing system: hydraulic Permanent pressure control: included Packaging: separate Loading/unloading: in the longitudinal direction Dwodpohtd E Ajfx Acyjd

Condition: new, machine/vehicle number: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideal for combustion in wood gasifiers and smaller wood chip boilers or heating systems. Any material from a woodworking operation (shavings, dust, etc.) can be briquetted. Wood chips, sawdust, wood shavings, etc., are generated in all craft and industrial woodworking companies. These materials incur significant storage and transport costs on a daily basis. Briquetting presses offer an ideal solution by compressing the material into briquettes, which are simple and space-saving to store and transport. Furthermore, the risk of spontaneous combustion is significantly reduced. Dsdpsyr I Hnefx Acyewd The briquetting presses require little space, feature sturdy construction, and are equipped with low-maintenance technology. Whether it is wood, paper, biomass, foam, or polystyrene, the ZBP can briquette all suitable materials. With a throughput of up to 35 – 130 kg/h, they are especially suited for small and medium-sized enterprises.

Condition: new, Year of construction: 2024, Pressing area: 3000 mm x 1800 mm Design: Freestanding Working area: 1460 mm x 2900 mm Number of manual hydraulic cylinders: 4 Pressing pressure per cylinder: 2000 kg Djdpfx Aoxzfw Uecyjwd Cylinder stroke: 70 mm Pressure clamps: 1 Machine length: 2900 mm Machine width: 900 mm Machine height: 2000 mm

Condition: used, Dimter Profipress L 2500 Dwsdpfx Asyhggrscyjd Year of manufacture: 2006 Dimensions: • Lamella width (for panels): 30-150 mm • Thickness: 11-60 mm • Infeed length: 800-2500 mm • Panel width: variable, up to max. 1300 mm • Infeed width per cycle: min. 650 mm / max. 1300 mm • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connection rating for 40 kW RF generator: 56 kW

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox iGen 5 Press’ colour production system Items for sale: 1 x Xerox iGen 5 Press with the following specifications: Includes FreeFlow Print Server Includes 2 x YVC-2 paper decks Includes YVC-3 finisher Dwsdpfx Aey Dfclecyed Includes 5th colour (orange) Not the right configuration? It is no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 15,719,744 pages Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: good (used), Year of construction: 1964, Pressing force: 5 t Stroke adjustable: 8 - 50 mm Ram adjustability: 25 mm Weight: approx. 500 kg Accessories / Special features: Dodpfxsy D Abfo Acyewd • Adjustable table • Foot release Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2015, machine/vehicle number: 663462, functionality: fully functional, Specification: Min./max. air pressure: 0.4/0.6 MPa; 4/6 bar Max. pressing force: 50 kN Total stroke: 150 mm Power stroke: 7 mm Type: STE341-7210 SF device Power: 0.5 kW Power supply: 230/3/50-60 V/A/Hz Control voltage: 24 VDC Protection rating: IP54 Dwsdpfewtgpxsx Acyed Pre-fuse: 16 A The TOX Pressotechnik hydropneumatic press EEB 008.061.A.001 is a versatile and powerful solution for precise forming and assembly operations in industrial manufacturing. It combines the advantages of hydraulics and pneumatics to ensure consistent force transmission and high accuracy. The robust design ensures long service life and reliable operation, while the user-friendly control system enables easy handling.

Condition: used, Year of construction: 2013, functionality: fully functional, Servo spindle press with screw station Rittal Top Therm: SK3304500 Specification: Dwodpfx Aowu Adbscyod V: 3x380-400 Watt: 25,900 Hz: 50 The Tool Temp TT-380 servo spindle press with screw station is an innovative and precise machine, ideally suited for demanding manufacturing processes. It stands out for its high accuracy and efficiency, making it a reliable solution for fast and precise screw connections. The integrated screw station enables efficient automation of the screwing process, while the servo technology ensures consistent force and motion control.

Condition: new, Year of construction: 2025, Performance: 40 and 60 kg/h Automatic start: yes Oil cooler: Yes Briquette size: 50 mm diameter Briquette length: 35 mm Container volume: 0.38 m³ Power consumption: 5.5 kW Machine length: 1860 mm Machine width: 890 mm Machine height: 1100 mm Weight: 400 kg Dwsdpfxswhuuls Acyod

Condition: excellent (used), Year of construction: 2001, 2 filter presses are being offered. Years of manufacture: 1999 and 2001. For details, see the nameplates. Dodsxbrmcepfx Acyowd

Condition: used, Year of construction: 1987, functionality: unexamined, Press force: 200 kN Ram stroke, constant: 210 mm Adjustable strokes per minute: 20 - 60 Usable working energy per cycle: 15 kJ Drive power: 24 kW Tool installation height between table and ram, stroke down, adjustment up: 500 mm Ram adjustment: 100 mm Ram clamping area: 600 x 600 mm Table clamping area: 600 x 600 mm Ejector stroke: 90 mm Dodpfx Aswy Sqzocyswd Weight: 20 t

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir Dwsdpsw Sgnkefx Acysd - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: excellent (used), Year of construction: 2014, Hydraulic Press Bunorm 4S-500 Manufacturer: Bunorm AG Model: 4S-500 Year of Manufacture: 2014 Pressing Force: 500 kN Djdpfx Acjxfl Axsyswd Maximum Pressure: 225 bar Weight: 3,200 kg Electrical Connection: 3×400 V + N + PE Frequency: 50 Hz Protection: 20 A Control System: Siemens Simatic HMI Touch Safety System: SICK C4000 Light Curtain SCOPE OF DELIVERY Includes, among others (non-exhaustive list): Hydraulic Press Bunorm 4S-500 Exact scope of delivery as shown in the photo series. The Bunorm 4S-500 hydraulic press impresses with its robust construction and a pressing force of 500 kN at a maximum pressure of 225 bar. With its solid build and a weight of 3,200 kg, the press is suitable for demanding production applications. The integrated Siemens Simatic HMI Touch control system enables precise and user-friendly operation. Thanks to the modern SICK C4000 light curtain safety system, a high level of operator protection is ensured. This machine is the ideal solution for companies that value reliability, precision, and safety. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: used, Year of construction: 1974, Vulcanizing Press Mapelli T60 Dedpfx Acjx Exndjyjwd Manufacturer: Mapelli Type: T60 Year of manufacture: 1974 Operating voltage: 380 V Frequency: 50 Hz Control panel: Integrated temperature controllers and operating modules Heating control: Three separately adjustable temperature zones Main switch: Present Manual/automatic operation: Selectable via control panel Safety features: Emergency stop Pressure display: Analog manometer Press area: Vertical closing unit with upper and lower heating plates Construction: Robust steel design Application: Vulcanizing and pressing of molded parts The Mapelli T60 vulcanizing press is a heavy-duty industrial press designed for reliable and uniform vulcanization processes. The robust housing made of solid steel ensures high stability and longevity. The clearly arranged control panel allows for precise adjustment of heating temperatures, operating modes, and pump functions. Three digital temperature controllers enable precise regulation of the heating plates, ensuring reproducible results during vulcanization. The vertical pressing mechanism offers a solid support and closing unit, ideal for molded parts and various materials. The machine features an integrated safety circuit including emergency stop, as well as an analog pressure gauge to monitor the pressing process. Due to its industrial design, the Mapelli T60 is excellently suited for continuous operation and offers an economical solution for companies requiring robust vulcanizing technology. No guarantee is given for the accuracy, completeness, or currentness of the information provided.