Used Press Manurhin for sale (9)

Condition: used, Year of construction: 2001, Technical details: turning diameter: 33 mm turning length: 330 mm control: 840 total power requirement: 20 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 3850,2000,2100 m 17 axes Nljdsw D Hh Ajpfx Aa Eek 3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axes Barfeeder Machine On-time 58,133 hours *

Condition: good (used), Year of construction: 1994, functionality: fully functional, Manurhin K'MX First Fanuc Year of manufacture: 1994 Control system: KMX Prog2 max. bar capacity: 26mm spindle stroke: 160mm Type of cross slides: 2 turret heads with 6 stations Number of tools: 12 Cross slide stroke: 35mm Spindle motor power: 3.7kW Spindle speed: 50-7,200 rpm Switching time turret heads: 0.6sec max. cross section of outer tools: 16x16mm Diameter of inner tool holder: 25.4mm Accessories Bar feeder FMB Miniturbo Various tool holders Collets, guide bushes Machine weight: 2,600 kg Nodpfsuxz Ifjx Aa Eslk Machines from discontinuation of operation at the end of 2024. A total of 3 machines with complete accessories are available.

Condition: new, Year of construction: 2024, -10 linear axes Nledpfxeu Ik Tie Aa Ejk - Ultra-powerful clamping - Rework spindle and its dedicated 9-position carriage (X4) enable you to carry out complex operations in masked time. - Spindle capacity: 8000 rpm - Oil-cooled electro-spindle - Latest-generation FANUC 31i numerical control - Compact cast-iron structure

Condition: like new (used), Year of construction: 2021, operating hours: 3,400 h, functionality: fully functional, machine/vehicle number: 40 6003, spindle motor power: 5,500 W, spindle speed (max.): 12,000 rpm, spindle bore: 20 mm, bar passage: 20 mm, Manurhin KMX 920 Clever – 9 axes Year: 2021 – Serial No. 40S003 Machine Specifications - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 20 mm - Spindle speed: 12,000 rpm - Spindle power: 3.7/5.5 kW - C-axis indexing accuracy: 0.001° SUB-SPINDLE - Maximum bar diameter: 20 mm - Spindle speed: 12,000 rpm - Spindle power: 3.7 / 5.5 kW - C-axis indexing accuracy: 0.001° - Number of turrets: 1 LOWER TURRET - Number of stations: 12 - X/Z travel: 90x65 mm - Y travel: 50 mm - Number of tool holders: 2 Nljdpfjxwp Txsx Aa Eok TOOL HOLDER 1 - Number of stations: 10 - Number of driven positions: 4 - X/Y travel: 90 / 319 mm END WORKING DEVICE - Number of stations: 12 - X/Z travel: 215x305 mm ELECTRICAL SUPPLY - Supply voltage: 400 V DIMENSIONS - Floor dimensions: 2000x1280 mm - Machine height: 1720 mm - Machine weight: 3600 kg MACHINE HOURS - Power-on hours: 32,700 h (increasing) - Machining hours: 3,370 h (increasing) Equipment - CNC: Fanuc 31i-B - Interface(s): Ethernet / RS232 / USB / PCMCIA - Chip conveyor - 3-color status light - Rotary cannon - Parts catcher - Parts ejector - Coolant tank ACCESSORIES INCLUDED IN THE SALE - Bar feeder: Iemca Elite 220 (2010) - Fire suppression system - 70 bar high pressure – Muller - Oil cooling unit DOCUMENTATION - Electrical diagram - Maintenance instructions - Operator’s manual Machine currently in use. Viewing under power possible. Available within 2 months. Machine to be collected on site; travel and transport costs borne by the buyer.

Condition: used, Year of construction: 1990, Technical details: spindle passage: 23 mm z-axis: 150 mm turning length: 150 mm stroke: x+z Achse / Axis/eje/eixo/os = 30 mm facing movement (x-axis): 30 mm longitudinal traverse (z-axis): 30 mm Nljdpfsu Iwyvsx Aa Eok control: Num 760T spindle turning speed - continuous: U/min feed speed: x/y: 5 mm/min feed speed: z: 10 mm/min tool turret: 2 Stück/pcs mit je/each 6 tools operating pressure: max. 45 bar total power requirement: 8,0 kW weight of the machine ca.: 2,2 t dimension machine xH: 2,45x1,3x2,2 m dimensions of the bar loader L-W-H: 4,65x0,5x1,3 m techn. details: - bar clamping hydraulic -automatic workpiece discharge (via catch basket) - 2 turrets with each 6 tool tapers - coolant device - control NUM 760 (size: L:1,0xW0,8mxH:1,56m) Zubehör: - bar loader magazine make IEMCA type CS 112/31 accessories: -24 div. tool tapers - device tool Sylvac system ( size:L:0,58xW:0,5xH:0,43m) *

Condition: used, Hydraulic guillotine shears SAGITA - MANURHIN - License BEYELER Type 2550 x 6 Machine. No. 00682 Year of construction 1980 Cutting length 2520 mm Cutting thickness 6 mm Backgauge 750 mm Nedpfxot Ac D Uo Aa Ejlk Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 11 kW Mains connection 400 Volt, 50 Hz - Back gauge with motorized adjustment and mechanical actual value display, fine positioning via handwheel - Manual cutting gap adjustment - Infinitely variable cutting length adjustment - 11 pieces hydraulic sheet metal hold-down device - front angle fence left 1300 mm - 3 front table extensions 1300 mm - electric foot switch - very solid and torsion-resistant welded construction - 1 set of replacement blades - slightly damaged (blade length 2550 mm) - operating instructions Space requirement with table supports L x W x H 3200 x 2800 x 1600 mm Space required for transportation L x W x H 3200 x 2150 x 1600 mm Weight 6300 kg Good condition

Condition: ready for operation (used), Year of construction: 2001, operating hours: 58,134 h, functionality: fully functional, machine/vehicle number: 25 03 - 01104608, turning length: 330 mm, turning diameter: 33 mm, rotational speed (max.): 8,000 rpm, feed length X-axis: 70 mm, feed length Y-axis: 225 mm, feed length Z-axis: 140 mm, Equipment and axis systems Turrets: 3 units with driven tools Gantry: 1 unit with driven tools C-axes: main and sub spindle with C-axis TECHNICAL DETAILS Turning diameter: 33 mm Turning length: 330 mm Number of axes: 17 Controller: SIEMENS 840D Main Spindle Working area – max. bar capacity: Ø 32 mm Headstock travel: 350 mm Spindle bore: Ø 37.5 mm Spindle drive – AC motor power (100/40%): 8 / 12.5 kW Max. spindle speed: 8,000 rpm Nlodpfxswm I Nto Aa Esk Spindle movement: left and right Spindle Feed Max. feed rate: 18 m/min Torque: 10.5 Nm Max. speed: 3,000 rpm Max. thrust: 3,000 daN Turret Heads (3 units) Rotary drive: gear motor Torque: 25 Nm Hydraulic locking – force: 2,500 daN Number of stations: 8 Tool clamping: VDI 30 Number of rotating tools: 4 Tool speed: 7,500 rpm Drive Motor power (100/40%): 5.5 / 7.5 kW Direction of rotation: left and right C-axis: included Feed Feed rate: 30 m/min Rated torque: 10.5 Nm Max. speed: 1,500 rpm Max. thrust: 3,000 daN Cross-Slide X1 – U1 Number of cross-slides: 1 Cross-slide travel: 70 mm Max. feed rate: 18 m/min Rated motor torque: 6 Nm Max. motor speed: 3,000 rpm Max. thrust: 500 daN Rear Tool Slide Number of slides: 2 U1 Slide travel: 70 mm Y1 Slide travel: 225 mm Max. feed rate: 18 m/min Number of stations: 6 Tool section: 20 x 20 Max. thrust: 500 daN Rated torque: 6 Nm Number of rotating tool holders: 1 / 4 Motor drive: 8,000 rpm Motor torque: 4.2 Nm Max. speed single spindle ER32: 2,000 rpm – 12.6 Nm 1 modular double spindle ER20: 6,000 rpm – 4.2 Nm 1 modular double spindle ER20: 8,000 rpm – 3.2 Nm Cross-Slide Number of slides: 2 X2 cross-slide travel: 140 mm Z2 feed slide travel: 120 mm Max. feed rate: 18 m/min Max. thrust on X2: 500 daN Rated torque: 6 Nm Max. thrust on Z2: 900 daN Rated torque: 10.5 Nm Turret Slide X3 Number of slides: 1 Travel: 80 mm Max. feed rate: 18 m/min Rated motor torque: 6 Nm Max. motor speed: 3,000 rpm Max. thrust: 500 daN MACHINE DETAILS Supply voltage: 3 x 400 V – 50 Hz Total power consumption: 30 kVA Continuous sound pressure level at workplace – machine only: 76 dB(A) Machine Dimensions Machine weight: approx. 6 t Space requirement: approx. 3,850 × 2,000 × 2,100 mm Operating Data Operating hours: 58,134 h EQUIPMENT - Bar loader - Equipment and axis systems - Turrets: 3 units with driven tools - Gantry: 1 unit with driven tools - C-axes: main and sub-spindle with C-axis

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3,7/5,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3,7 / 5,5 [kW] - C axis indexing precision : 0,001 [°] - Number of turrets : 1 LOWER TURRET - Number of positions : 12 - X/Z stroke : 90x65 [mm] - Y stroke : 50 [mm] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 - X/Y stroke : 90 / 319 [mm] END ATTACHMENT - Number of positions : 12 - X/Z stroke : 215x305 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2000x1280 [mm] - Machine height : 1720 [mm] - Machine weight : 3600 [kg] MACHINE HOURS - Number of hours under power : 23167 [h] Nljdpfeuhbdisx Aa Eek EQUIPMENT - CNC : Fanuc 31i-B - Interface : Ethernet / RS232 / USB / PCMCIA - 3 colors status lamp - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank - Bar loader : Iemca Elite 220 (2010) - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 81154, turning length: 600 mm, turning diameter over cross slide: 300 mm, spindle speed (max.): 4,000 rpm, turning diameter: 360 mm, bar passage: 60 mm, TECHNICAL DETAILS Control: Siemens 840D Machining area Bar capacity: Ø 60 mm Spindle bore: Ø 66 mm Turning diameter (effective): 300 mm Permissible turning diameter: 360 mm Turning length: 600 mm Center distance: 870 mm Spindle Spindle mount: ISO-A6 Speed range: 0 – 4,000 rpm Power: 15 kW (S1) Tool turret Turret system: Baruffaldi VDI Tool stations: 12 Driven tools: 6 Travel paths X-axis travel: 190 mm Z-axis travel: 650 mm Rapid traverse speed X/Z: 18 m/min Tailstock Tailstock movement: manual via keystroke or M-code Condition and Special features Filter system: Mist extraction currently out of service EQUIPMENT - LNS Super Hydrobar hydraulic bar loader (Swiss made) Nodpfx Aaowc Sa Us Ejlk - SMW-AUTOBLOK chuck type 210HYN-S - Tool package with clamping jaws and VDI tool holders - Turret with 6 driven tools - Programmable tailstock control