Used Contour Edge Banding Machine for sale (84,886)

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting Ijdpfxec Tmyge Ag Uoal milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 12 m/min Dust extraction* 8x connection Ø100 mm Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. Iaedpfx Agsxzb Iis Uol KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: new, machine/vehicle number: 7-KZM2, Edge gluing machine for gluing ABS and PVC edges to straight surfaces. It has an automatic panel feed and applies the glue directly to the panels. For edge thicknesses of 0.4 to 3 mm and panel thicknesses of 10 to 45 mm. It automatically cuts off the excess edge length at both panel edges and mills the excess edge of the panel flat or round at the top and bottom. Mechanical digital display for panel thickness, edge thickness and the milling units as standard. Electronic control of the glue temperature with digital thermometer. Table extension for wider panels included in the price. Machine is controlled by compressed air. Granules for the gluing device are liquefied in the melting tank. Control panel on top for convenient operation. Iodpfxsvw Ea Ee Ag Uoal Technical data: Table dimensions 1400 x 600 mm Table extension up to 500 mm Veneer roll carrier diameter 600 mm Panel thickness 10 - 45 mm Workpiece dimensions min. LxW 300 x 90 mm Feed speed 5 m/min Extraction nozzle diameter 120 mm Total motor output 3.2 kW S6 (2.4 Kw S1) Heating output 1260 W Compressed air connection 6.5 bar Weight 410 kg Accessories Optional: Roll carrier with 800 mm diameter Transport device

Condition: reconditioned (used), Year of construction: 2014, Advantage 400 single-sided edge banding machine Iedeitu Eaopfx Ag Ueal Equipment: - Working length 6700 mm -divider top and bottom - jointing unit 08.380 - Radiator 300 long, 2 x 1.5 kW for preheating the workpiece edge - gluing unit 283.1516 toothed belt drive - Strip control to prevent incorrect gluing. - Rotary capping unit for workpiece leading and trailing edges - Space reserve for lubricant spraying at high-gloss edge - Milling unit 08.0561 - Copy milling unit SKF-L - Profile scraper unit 08.519 - Spray nozzles at top and bottom for application of cleaning agents - Self-feeding scraper unit 08.521 - Buffing unit 08.617-2 - Interior lighting - Electronic height adjustment of top pressure (one-sided) Technical data "workpiece - Workpiece length min.: 150 mm - Workpiece width min.: 65*/ 150 mm (*with max. workpiece thickness of 25 mm) - Workpiece thickness min.: 8 / 12* mm (*with profile scraper) - max. workpiece thickness: 60 mm - Smallest workpiece: 65x380 / 150x380 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm* (*observe max. cutting cross section) - workpiece shape: rectangular - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, foil, veneer - Laterally protruding coating material: 0 mm Technical data "Edge material Roll material without foil*: - Paper edges & plastic edges: 0.3 - 3.0 mm (*foil only with additional equipment) - veneer edges: 0.5 - 3.0 mm Edge cross-section for veneer max.: 150 mm² Edge cross-section for plastic edge max.: 180 mm² Cut-to-length edge strips: strips 3.0 - 12.0 mm Strip cross-section max.: 600 mm² Edge height min.: 12 mm Edge height max.: 65 mm Upper edge protrusion max.: 2 mm Edge profiles: - Paper edge approx. 0.4 mm (chamfer 15°) - Plastic edge up to 3.0 mm (radius depending on tool) - strip up to 12 mm (flush milling) Technical data "machine working length 6700 mm Feed speed 20 m/min for Advantage 400 Constant workpiece protrusion from the chain track: 35 mm + Edge thickness max. cross section: 520 mm² Throughfeed width min. (with 35 mm projection): 65 mm Workpiece length in feed direction min.: 150 mm basic height (upper edge of chain track): 900 mm Unit side: In feed direction left Control voltage: 24 V DC / 230 V AC Mains voltage: 3/N/PE, 400/230 V, 50 Hz, +/-5% (FI protection circuit not applicable) Machine control ICOS Expert Features: - PC-based control system with integrated PLC and electronic draw frame control - Simple, machining-related program creation - Navigation and operation via touch screen - Program memory for max. 1000 programs - Program number 3-digit numeric - Control system prepared for service portal Technical data control system:* - Panel PC with integrated 15" TFT display, with touch screen - USB connection - Fast EtherCat interface (field bus) - Ethernet network connection RJ45 in the switchboard - Operating system: Windows with TwinCat system for real-time control Note: The technical data and descriptions are a copy of the order confirmation at that time. Data are for information only and are not binding. Condition: - Machine completely overhauled - upper pressure belt new - Feed chain new - Feeler wheels and tools of finishing new

Condition: used, Year of construction: 2015, functionality: fully functional, total length: 7,920 mm, workpiece height (max.): 60 mm, warranty duration: 3 months, HOLZ-HER Edgebander ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15mm. Simple program changeover and tool adjustment via the 18.5" touch control panel. Short heating time for the GlueJet adhesive system of approx. 2 to 3 minutes, depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet application system and glue cartridges. Changing PUR adhesive and cleaning the system is quick and easy within a few minutes. Iajdpox Emf Dofx Ag Usl Axis adjustment via high-precision, repeatable servo motors. Special configuration for materials with protective film, such as high-gloss and supermatt surfaces! One of the true highlights of this machine is the multifunction package, which shows its strengths in companies processing a wide variety of edges. The DIA tools are constructed in multiple stages and can switch between radii and bevels as needed – from the longitudinal milling unit to corner copying and the profile scraper. The pull-out workpiece support and the extended infeed area facilitate processing of large workpieces, and a guide system assists in feeding small parts into the machine. Edging thickness (coil material): 0.4 – 3 mm (depending on material) Edging thickness (strips): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR, with minimal effort required. All common edge types, including high-gloss, supermatt, and solid wood edges up to 15mm. iTronic – pressure and glue quantity control Prepared for connection to a RETURN system Motorized pressure bridge with upper belt drive Multifunction units for rapid changeover between radius, flush, and bevel processing Vertical & horizontal spray systems and much more.

Condition: used, Year of construction: 2024, functionality: fully functional, One-sided edge banding machine with NC-controlled adjustment via 18-inch touchscreen (L-Motion) Edge material: - Roll stock 0.4 - 3 mm - Solid wood strips up to 5 mm Workpiece thickness: 10 - 60 mm Minimum workpiece length: 120 mm Minimum workpiece width: 75 mm Minimum workpiece width with corner copying: 170 mm Feed speed: 16 m/min With corner copying: for thicknesses 16, 18 & 19 mm, feed speed 12 m/min Aggregate equipment: RIEPE separating agent application Iaodpfoxugpljx Ag Uol Jointing milling unit with 2 counter-rotating, demand-controlled motors, equipped with diamond-tipped spiral cutterheads Extra: Diamond milling tools, 65 mm height instead of 30 mm Automatic edge feeding with swiveling reel table, diameter 800 mm, with automatic strip magazine, spiked roller for solid wood strips Glue pot with automatic temperature control and stand-by function; glue roller temperature adjustable separately, capacity approx. 1.5 kg Extra: Glue run-out function, Teflon-coated drip tray, customized software for EVA/PU glue Extra: Quick-change glue pot system Pressure zone with 1 powered main pressure roller and 2 free-running follow-on rollers End trimming unit with 2 HF motors, 0.55 kW, pneumatically tiltable 0 - 10 degrees, controlled from the operator panel Combined milling station with 2 HF motors, 0.55 kW, 12,000 rpm L-Motion multifunction tool (straight & 3 different radii), horizontal & vertical tracing, motorized positioning via controller Extra: nesting package for combined milling unit Corner copying milling unit with 2 motors. Automatic processing of end edges up to 2 mm edge thickness (not recommended for soft- & postforming profiles) with 2 motors, 0.27 kW each 2 L-Motion motors for positioning the horizontal tracing shoes, plus tool positioning Radius scraper with L-Motion multifunction tool (3 different radii), motorized adjustment with 3 L-Motion motors Extra: nesting package for radius scraper Flat scraper unit with pneumatic in/out control from the operator panel RIEPE cleaning agent spray device Buffing unit with 2 motors, 0.09 kW each Control system: 18.5-inch graphic touchscreen with L-Motion software Extra: potential-free contact for connection to a return conveyor Total machine length: 4,890 mm The machine is being replaced due to insufficient capacity The return conveyor system visible in the photos is not included in the scope of delivery.

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm Iedpohy Tlrefx Ag Usal length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 020313L, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Flat scraper knife Buffing unit Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Iedpfx Aexn Hzbsg Uoal Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: M/53056, total length: 9,800 mm, overall weight: 4,500 kg, compressed air connection: 6 bar, input voltage: 400 V, input frequency: 50 Hz, Single-sided edge banding machine in right-hand configuration - with jointing unit - gluing unit - double end cutting unit - flush trimming, chamfering, and radius milling unit - corner rounding unit - scraper and edge buffing unit with high-performance automation - pressure zone with one driven roller and six follow-up rollers - automatic edge thickness adjustment for all units - automated chamfer thickness adjustment of the top pressure to panel thickness - pneumatic engagement/disengagement of all processing units with monitoring - Machine in CE-compliant design with complete encapsulation of processing zones by high-quality noise protection hoods. Machine length: 9,800 mm Machine weight: 4,500 kg Gluing unit - for hot-melt adhesive granules - with quick heating tank, preheating time: 6 minutes - electronic temperature control - adhesive application roller (no adjustment required for different material heights) - operates in both co- and counter-rotation, automatically activated via program control Edge thickness: 0.2 - 20 mm Workpiece dimensions: Minimum width: 60 mm Minimum height: 8 mm Maximum height: 60 mm Minimum length: 160 mm for strip edges / 60 mm for continuous roll edges / 150 mm with double end cutting unit Workpiece transport - heavy-duty chain conveyor with precision sliding guides for chain support plates with flat and round guide rails to ensure positive workpiece transport - feed speed: 12 - 20 m/min, adjustable via electronic frequency inverter from the central control panel, values can be saved in work programs - motor power: 5.5 kW Panel thickness adjustment Motorized adjustment of double roller top pressure, preselection via the central control panel, values can be saved in work programs Edge thickness adjustment - automatic positioning of all edge thickness-related units including the pressure zone, preselection via the central control panel, values can be saved in work programs Iasdpfx Agjxy Sizj Uel Machine control - central control panel - PLC and line control for contactless control of the processing units Central control panel - for flexible and easy operation of the edge banding machine, with a specifically developed user interface for clear and rapid access to all important machine and unit statuses - intuitive menu navigation via two-line text display, supported by clearly arranged symbols with two-color LED status indicators PLC - high-performance PLC to industrial standards for fast and efficient interaction with the machine and for controlling all functional groups and line control Line control - high-resolution line control of all processing units with +/- 1mm accuracy over the full machine length - complete access via the control panel for all program-controlled processing units - values can be saved in various work programs EFU - electronic frequency inverter Connections Electrical: 3 x 400 V, 50 Hz, rated current 42 A, protection: 50 ampere, supply: 5-core, 5 x 10 mm², control voltage: 24 V Extraction: 1 x 120 mm, 1 x 160 mm, 1 x 120 mm, extraction air velocity: min. 20 m/sec, required capacity: approx. 65 m³/min Compressed air: 6 bar, 1/4" - consumption approx. 300 l/min, required minimum pressure: 4.5 bar, all workpiece blow-off lines are line-controlled.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, type of input current: three-phase, plate height: 50 mm, From business closure Iedpfox Avcdsx Ag Ueal Type: IMA Compact 309 C Year of manufacture: 1992 For roll material and strips up to 9mm thickness - Gluing with hot-melt adhesive granulate - End trimming - Sawing - Flush milling - Scraper knives and buffing Payment in cash upon collection. Private sale – no warranty.

Condition: used, Year of construction: 2007, machine/vehicle number: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Used Machine GM020.0068 AKV 3003 DK - F Year of manufacture: 2007 Specification: 3 mm 1st milling station: Combination Surface pull scraper with extraction Iaodsw Nih Iepfx Ag Ujl Chassis Pneumatic milling adjustment Limit switch lever, 7.5° inclination

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Iajdpex Eilqofx Ag Uol Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine Isdpec S Di Rsfx Ag Uoal SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 220.01.016.22, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, rotary table diameter: 750 mm, rotational speed (max.): 12,000 rpm, The machine is being auctioned due to a business closure! Further details on the machine’s equipment can be found in the attached order confirmation. TECHNICAL DETAILS Workpiece height: 8–60 mm Rotary table edge magazine diameter: 750 mm Edge banding material (coil): 0.4–3 mm Rotary table diameter for coil edge material: 740 mm Support surface (workpiece infeed): 600 mm Spindle speed of diamond pre-milling unit: 12,000 rpm Feed speed, chain feed: 10 and 18 m/min Spindle speed, cross-cut saw unit: 12,000 rpm Upper multifunctional milling unit speed: 12,000 rpm Lower multifunctional milling unit speed: 12,000 rpm Cutter assembly: 64 mm MACHINE DETAILS Electrical data Voltage: 400.0 V Phases: 3 Frequency: 50/60 Hz Current: 28.0 A Iodsxwt Nqspfx Ag Uoal Power: 15.0 kW EQUIPMENT Ball bearing rotary table for edge banding coil material Workpiece infeed and feed fence with manual adjustment Chain feed with two speeds Edge feeding for coil and strip material in single feed Upper and lower multifunctional milling unit x-motion PLUS via smartouch Upper and lower radius scraper blade x-motion PLUS Corner rounding unit with motorized adjustment for postforming and softforming profiles Upper and lower polishing units Pneumatic-mechanical infeed stop for workpiece gap monitoring glueBox application unit

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° Iasdpfx Agewka S Ij Usl - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, workpiece height (max.): 50 mm, workpiece length (max.): 200 mm, workpiece width (max.): 2,500 mm, rotational speed (max.): 18,000 rpm, Equipment: CE marking, TECHNICAL DETAILS Panel width max.: 2,500 mm Panel width min.: 130 mm Panel height max.: 50 mm Panel height min.: 8 mm Panel length max.: 200 mm Panel length min.: 30 mm UNITS Sizing unit Unit: Trimming Unit: Corrections automatic engagement based on timer Motor power: 2.2 kW Max. speed: 6,000 rpm Magazine for coil Number of positions: 1 Gluing system Glue pot for polyurethane adhesive Prefuser for polyurethane adhesive Prefuser for polyurethane adhesive D4-e Edge pressure roller track Number of pressure rollers: 4 Edge processing unit 1 Unit: Top router Number of motors: 1 Motor power: 0.7 kW Max. speed: 18,000 rpm Edge processing unit 2 Unit: Top router Number of motors: 1 Motor power: 0.7 kW Iedexxavtepfx Ag Usal Max. speed: 18,000 rpm Edge processing unit 3 Unit: Hot air blower Model: APPLICATORE DI FILM Motor power: 0.1 kW Edge processing unit 4 Unit: Brush Number of motors: 2 Edge processing unit 5 Unit: Top router Number of motors: 1 Edge processing unit 6 Unit: Top router Number of motors: 1 MACHINE DETAILS Installed total power: 12 kW Adhesive system: PUR Pressure type: rubber-coated belts Number of units installed in sizing: 1 Number of units installed in edge processing: 6 EQUIPMENT Spraying unit CE marking

Condition: used, Year of construction: 2005, machine/vehicle number: Werksüberarbeitungsnummer: WÜA920DK-F12960, Used machine GM020.0029 Year of manufacture: 2005 AKV 3005 DK-F 8 mm version 1st milling station: Combination Cleaning station Corner rounding cutter Jointing cutter Surface scraper with extraction Profile scraper Chassis Pneumatic milling adjustment SPS control Preparation for interchangeable tanks Iaodpfx Ajw In R Ejg Ujl

Condition: new, Hebrock Model F 2 next Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special offer price and full manufacturer warranty. The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to 2 mm milling depth), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touch screen) Hot melt glue application to the workpiece for edgebanding material up to 3 mm jointing cutter (incl. slide - tool) up to 2 mm milling depth maintenance-free glue basin with change basin pre-equipment incl. glue discharge device HF crosscut saw station (approx. 12000 rpm) HF milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version) robust chain drive ball bearing mounted double roller top pressure viewing window from rear side of machine extractable workpiece support Including special equipment: F2/12 surface scraper (incl. pneum. lift) F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling) Isdpel D Rp Esfx Ag Ueal F2/27 Nesting for milling stations

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 20 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 20 m/min Panel height min.: 8 mm Panel height max.: 60 mm Panel length min.: 150 mm Panel width min.: 65 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Pre-cutting unit Unit: Corrections Edge pre-heating lamps Glue application system Glue pot for polyurethane adhesive Pre-melter for polyurethane adhesive Edge pressure roller track Number of pressure rollers: 6 End trimming unit Model: 08.415 Number of motors: 2 Motor power: 0.66 kW Max. speed: 12,000 rpm Iaedpfjxxaucex Ag Usl Top/bottom trimming unit Model: 08.0555 Number of motors: 2 Motor power: 1 kW Multifunctional unit Model: SKF-L Number of motors: 4 Max. machining speed: 20 m/min Motor power: 0.18 + 0.400 kW Speed: 12,000 rpm Edge scraping unit Model: 08.519 Glue scraping unit Model: 08.521 Buffing unit Model: 08.617-2 Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Number of operating units: 8 Adhesive system: PUR Control system: WINDOWS EQUIPMENT Programming software for the machine: ICOS open TS CE marking

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Iodpelc Ewijfx Ag Ujal Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, feed rate X-axis: 40 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 3,000 mm, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Max. feed speed: 40 m/min Panel width min.: 240 mm Panel width max.: 3,000 mm Panel height min.: 8 mm Panel height max.: 60 mm Iasdpexxal Isfx Ag Uel Min. edge thickness: 0.4 mm Max. edge thickness: 3.5 mm UNITS Format Cutting Unit Unit: Double top and bottom pre-milling unit Model: KD 11 Motor power: 4.5 kW Max. speed: 6,000 rpm Magazine for edge tape Number of positions: 12 Gluing system Glue pot for polyurethane adhesive Pre-melter for polyurethane adhesive Edge pressure roller conveyor Edge Processing Unit 1 Unit: End trimming Number of motors: 2 Edge Processing Unit 2 Unit: Top milling unit Number of motors: 2 Edge Processing Unit 3 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 4 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 5 Unit: Top milling unit Number of motors: 2 automatic engagement by time Edge Processing Unit 6 Unit: Edge scraper Edge Processing Unit 7 Unit: Glue scraper Edge Processing Unit 8 Unit: Brush Number of motors: 2 FEATURES PUR gluing system

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood Iaedpfx Agsfbr S Ro Uol machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 3,200 mm, Equipment: CE marking, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 320 mm Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Number of working units: 8 UNITS Trimming Unit 1 Function: Sizing Model: RT30 Motor Power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Function: End Trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Function: Edge Milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Function: Multifunction Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Function: Profile Scraper Model: RB40 Edge Processing Unit 5 Function: Glue Scraper Model: RC20 Edge Processing Unit 6 Iaedpsxw T Tpofx Ag Uel Function: Brushing Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Installed total power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutters Multifunction unit Top pressure Pressure via rubberised belts Panel support guide NC positioning Angled panel infeed system Automatic engagement by time Edge preheating lamps Coil magazine Hot-melt glue pot Hot-melt glue pre-fuser Edge pressure roller conveyor Spray unit SINTRA machine programming software Panel discharge via roller transfer conveyor Panel feed via motorised carpet belt Return system for left-side edge bander CE marking

Condition: like new (used), Year of construction: 2023, Edge Banding Machine SCM Model Olympic 500 HP 'T-ER2' Offer type: LEASE RETURN, Used machine Availability: Immediate Location: In stock Condition: As new Year of manufacture: 2023 GENERAL: A comprehensive and versatile edge banding machine designed for small and medium-sized enterprises, capable of processing a wide range of materials to a high-quality standard within a compact footprint. The SCM Olympic 500 features an electronic adjustment system and enables the machining of 2 radii, each with its own tooling, for workpieces with a minimum width of 60 mm. HIGHLIGHTS: • Large touchscreen control panel with “Maestro active edge” software for human-machine interface (HMI) • Maestro connect: prepared for later installation, no gateway required • 2-radius processing, chamfering at all units with multi-edge tooling - Fine trimming and radiusing unit, radius = 1 mm - Fine trimming and radiusing unit, radius = 2 mm • Electronic positioning of the pressure beam OPTIONAL MACHINE EQUIPMENT: Workpiece spacer at infeed KIT “SAV€NERGY” Interior lighting for the enclosure and edge banding area “Nesting” pressure roller kit Release agent spray unit “AAR” Finishing spray unit for edge processing Spray unit for sensitive edges Jointing cutter unit “RT-V1” “EASY SIZE” device – electronic fast adjustment of the jointing cutter Glue unit “VC-VM” Ceramic lamp with infrared for pre-heating workpieces Electronic positioning of all pressure rollers End trimming unit “K-2 Radius” Chamfer and radius trimming unit “R-HP Multiedge 2R” Corner rounding unit “Round 2-A Multiedge 1R” KIT 'MULTIEDGE 3' with automatic position change straight/R/R for “Round 2-A Multiedge 1R” unit Radius scraper aggregate “RAS-HP Multiedge 2R” Flat scraper aggregate “RC-N” Iajdpfx Ajq A Tyzjg Uol Buffing unit “SP-V” MACHINE LANGUAGE: German TECHNICAL DATA: Edge thickness: 0.4–6 mm Workpiece thickness: 8–60 mm Min. workpiece width: 60 mm Feed speed: 12 m/min Machine length: approx. 4950 mm SPECIAL PRICE FOR LEASE RETURN!!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 25 m/min, edge thickness (max.): 3 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Iaedoxw T H Nopfx Ag Usl Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Router Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spraying unit Machine programming software PowerControl PC22 CE marking