Used Edge Gluing Machine for sale (66,410)

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1731 067, Equipment: CE marking, onboard computer, For sale is a tape gluing machine from Herbert Meyer GmbH. Working width: 1800 mm, can operate in continuous mode. The machine is from 2013 and is in good technical condition – ready for operation. I can provide more information via email. Power: 32.2 kW Supply voltage: 400 V Nsdpfx Akozfi Hbjielh Supply current: 47.5 A Air supply: 6 bar Fusing machine with a particularly efficient heating zone and precise pressure of the pressure rollers for even pressure. Energy savings and clean operation guaranteed.

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: 3074, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, total height: 1,618 mm, total length: 4,984 mm, total width: 1,425 mm, overall weight: 1,400 kg, year of last overhaul: 2025, Equipment: CE marking, Due to the acquisition of a new machine, our reliable edge banding machine, purchased new in 2016, is now for sale. The machine has operated in a joinery workshop with 8 employees. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit has been re-sharpened. The glue roller’s clutch has been replaced. The glue pot was completely refurbished and cleaned. The machine is suitable for both EVA granulate (e.g., Henkel Dorus KS351) and PUR adhesives. The degree of pre-milling, the edge material thickness, and the position of the lower and upper milling tools can be conveniently adjusted from outside the machine housing via manual handwheels. The control system allows custom edge banding programs to be saved. Nsdpfxszhrdue Akislh The machine automatically and pneumatically switches between 0.4 mm and 2.0 mm edge banding via program. Main specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100–150 l/min) - Touchscreen - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness, in rolls: 0.5–3.0 mm - Workpiece thickness: 8–60 mm (banding 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Processing units: - Diamond pre-milling (12,000 rpm) - Release agent tank/nozzle - Gluing station - End trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/nozzle - Flat scraper - Polishing wheel Price does not include VAT.

Condition: excellent (used), Year of construction: 2018, operating hours: 4,832 h, functionality: fully functional, machine/vehicle number: 2017058, total length: 7,000 mm, total width: 1,800 mm, overall weight: 5,650 kg, Montresor LOLA 10.8 DX edge grinding machine • Belt running direction: RIGHT to LEFT, year of manufacture: 03/2018, #2017058 • In excellent optical and technical condition – only 4,832 operating hours • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 3 pneumatic lower and 3 upper chamfer supports • Belt infeed: motorized calibrating/profiling support Nlodpfoz Rk E Uex Akioh • Belt outfeed: motorized water-jet support • Automatic centralized oil and grease lubrication • Double-row table extension console • Space requirement approx.: 700 x 180 cm, infeed and outfeed path: 200 x 60 cm Optional services available, such as: freight, installation, and training Pricing • EXW from the machine location, plus VAT, subject to prior sale, does not include tools, attachments, and accessories; items shown in the pictures are not included with the machine/scope of delivery. Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty • Machine sold "as is" with exclusion of all warranty claims Inspection possible • at the facility near Rosenheim Availability • after delivery of the new machine, approximately January/February 2027

Condition: used, Kantenanleimmaschine / Edge Gluing machine Essor Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Nedpfoymaztox Akislh

Condition: good (used), Year of construction: 1991, Edge banding machine for shaped parts, edge bander, edge banding machine -Workpiece thickness: 10-85 mm -Heating fan: 6 kW, pre-coated edges Njdpfjb A Ninex Akislh -Cutting knife -Edge plate -Transport dimensions: 900/700/H1080 mm -Weight: 135 kg

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-04-6588 si 0-284-96-1130, functionality: fully functional, power: 21 kW (28.55 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: electric, actuation type: electric, total height: 1,600 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Maxim speed:18m/min General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Loc A U Uov Szt Dslccsai Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Nsdpfx Asz E A T Eokislh Groups existent on the machine 1)Emulsion spray at the inlet and outlet Edge preheating 2)Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment 3)Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min 4)Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide 5)Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment 6)Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movem 7)Cleaning and polishing unit 8)Automatic return conveyor- Homag TFU 140

Condition: used, Year of construction: 2008, machine/vehicle number: AH005185, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, actuation type: pneumatic, overall weight: 5,500 kg, Equipment: CE marking, We are selling a very well-maintained STEFANI SOLUTION 8000 edge banding machine. Nledpfx Akozdlaboijh Year of manufacture: 2008 Machine length: 11,000 mm Edge band thickness: 0.5 - 16 mm Workpiece thickness: 10 - 60 mm Minimum workpiece width: 260 mm Maximum speed: 25 m/min (without using saws) Units: - Separating agent applicator - Pre-milling unit - Gluing unit - Saws - Trimming units - Buffing units - Brushes - Saw for creating grooves on the surface and along the edge. The machine is in operational condition. For additional information, please call.

Condition: used, Kantenanleimmaschine - Edge Gluing Machine Sumbel Perkeo Year 2014 - Serial-No. 40050 Working width max. 60mm Kaltleim / Cold Glue System --wie neu / like new-- Nsdewgdw Tepfx Akijlh Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2023, functionality: fully functional, operating hours: 59,000 h, input voltage: 400 V, input frequency: 60 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, actuation type: electric, total height: 2,000 mm, total length: 3,095 mm, total width: 1,330 mm, overall weight: 700 kg, Equipment: documentation/manual, 2023 Good condition For inquiries, please contact: Gergely Repka 06707739050 Professional edge banding machine suitable for edge sealing and post-processing of panel-format sheet materials. It can be used for particleboard, MDF, furniture board, table tops, etc. Key technical data: * Coil edge banding: 0.4–3 mm * Strip edge banding: 0.4–5 mm * Maximum edge height: 55 mm * Processable sheet thickness: 8–50 mm * Edge banding cross-section: max. 5 × 50 mm (material-dependent) * Minimum workpiece width: 70 mm * Minimum workpiece length: 180 / 210 mm * Feed speed: 9 m/min * Manually adjustable pressure beam * Extendable workpiece support with 500 mm distance Equipment: * Edge Control BC15 control system with a 15.6" touchscreen * Vi.se. (Visual Setting) digital setting system for quick and accurate machine adjustment * FG101 pre-milling unit with 2 diamond milling heads * MG101 edge feeding unit * Glu Jet GJ101 hybrid adhesive technology (2.3 kW / 50 Hz) with automatic adhesive height adjustment * 1.4 kg adhesive tank (for 4 cartridges) * Glu Jet cleaning tank * Automatic refilling system * DW101 pressing unit * KA101 pneumatic end trimming unit, 1 motor version * 0.22 kW * 12,000 rpm * FR101 profile smoothing unit * chamfering and radius function * 2 × 0.37 kW * 12,000 rpm * 2 replaceable HW milling heads Ø75, Z4, R2 * FF101 corner rounding unit with dual linear guide * ZK101 scraping unit R=2.0 mm * Chip collection system * FK101 surface scraper unit * SW101 polishing unit * 2 × 0.13 kW * 1,400 rpm * 2 textile polishing discs, 120 mm * Adjustable from 0–5° Nlodpfx Aszi Am Nekish * TR101 spraying unit for infeed and outfeed sides

Condition: used, This Knopp glass edge grinding machine, model: SILIKANT-2500, will be auctioned off online as part of our industrial auction / machine auction due to the business closure of HERA Glas GmbH. You can find this and many other items on our platform. Nodpfo Aa Rkzsx Akielh

Condition: used, machine/vehicle number: 12, Kantenanleimmaschine - Edge Gluing Machine Jagenberg KAM 60Serial-No. 12.30124/11 Working width max. 60mm Kaltleim / Cold Glue system Online-Video-Inspection by Skype-Video Nljdpfx Ajk Tu Ekokioh We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: NR: 220.10.029.19, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, High-quality Format4 Tempora 60.06 EL edgebander for sale – ready to work! Take your production to the next level with this lightly used Format4 Tempora 60.06 EL edgebander in excellent condition. Built for industrial performance, this machine delivers outstanding precision and a flawless finish on every panel. - High-precision automatic edge banding - Pre-milling unit for perfect edge preparation - Reliable, consistent gluing system - Complete processing: trimming, milling, polishing - Easy operation and dependable performance Included extras: - Red air tank (as shown in the photos) - Additional heated glue pot – ideal for quick switching between different glue colors Njdpfxjy Dg N To Akiolh Carefully maintained, lightly used, and fully operational – ready to be put straight into production. The machine is available due to factory restructuring. Contact us for more details or to arrange a viewing.

Condition: used, Year of construction: 1996, Used Machine Features and Technical Specifications: - Automatic edge magazine for rolls up to 3 mm; manual feed for strips up to 13 mm - Trimming shears for up to 3 mm - Cartridge-type adhesive application system - 3-roller pressure unit - 2-motor trimming unit - Multifunction routing unit (flush, radius, chamfer) - Radius scraper Nedpfx Akj Aa A I Sjiolh - Corner copying unit - Surface scraper - Buffing unit - Edge banding thickness: 0.4–13 mm (with tool change) - PVC edges up to 3 mm - Edge banding height: max. 51 mm - Edge banding length: min. 200 mm - Edge banding overhang per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Workpiece thickness: min./max. 6/45 mm - Feed rate: 11 m/min. - Dimensions: 4500 x 1020 x 1630 mm - Distance from wall: 400 mm New gluing station installed in 2015

Condition: excellent (used), Year of construction: 1988, Ref:11163 . 1988 Ochsner Edge Gilding Machine Nledpfx Ajz I Tz Ejkijh For semi-automatic edge gilding of a variety of books but particularly suited to the production of pocket diaries up to A4 books. Equipped with: Hand feeding area for end boards and book blocks 4 sanding stations Brushing station Pre-heating of book blocks Gild foil application with 2 rollers Specification: Max: 50 blocks per hour pocket diary size 25 blocks per hour desk diary size.

Condition: excellent (used), FORMAT 4 Tempora 60.06 edge banding machine with glueBox – used Touchscreen, swiveling control panel, program memory, automatic adjustment of pressure beams, feed via transport chain, extendable workpiece support, diamond flush-trim cutter with both forward and reverse rotation, glue reservoir located underneath, changeover device for glue reservoir, use of PUR adhesives possible, GLUEBOX, pressure unit with driven roller, miter saw with 2 HF motors, miter saw pneumatically swiveling, flush/radius trimming unit, motorized positioning control for trimming unit, x-motion PLUS, corner copying unit with diamond-coated cutter, radius trimming blade, radius trimming blade with motorized positioning, edge trimming blade, program-controlled edge trimming blade, infeed stop, spray system for release agent, spray system for lubricant, spray system for cleaning agent, year of manufacture 2022 ----- Technical data ----- Edge thickness, roll material: 0.4 - 3 mm, Edge thickness, strip material: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, min. workpiece length: 140 mm, Feed speed: 10 m/min, Screen diagonal: 15 inches, Dimensions of flush-trim cutter: D 80 x 64 mm, Power of flush-trim cutter: 1.1 kW, Power of miter saw: 0.35 kW, Power of trimming station: 0.75 kW, Dust extraction port Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Overall length: 4,872 mm, Dimensions (L x W x H): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - all settings checked - adjusted according to manufacturer's specifications - complete basic inspection - complete basic cleaning Nlodpsu R S Nwjfx Akish - electrical system checked - pneumatics checked - ready for immediate use

Condition: new, Year of construction: 2026, functionality: fully functional, Various glue pots for edge banding and squaring edge banding machines. We supply new glue pots or overhaul your used one. Njdpfx Asf Tc Rqjkijlh We also sell single spare parts. Scm, Stefani, Idm, Ima, Biesse

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Njdezuyh Uspfx Akislh Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Scraper blade 2 x carbide scrapers Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 590, type of input current: three-phase, table length: 1,000 mm, overall weight: 480 kg, height adjustment type: hydraulic, input voltage: 400 V, grinding belt length: 3,200 mm, grinding belt width: 200 mm, input frequency: 50 Hz, The HOUFEK HB 1000 edge sanding machine, manufactured in the Czech Republic, is designed for sanding solid wood and wood-based materials. This machine is ideal for carpentry workshops, suitable for processing the edges of furniture components, moldings, fronts, and other wooden products. The table with adjustable inclination allows for sanding at an angle, and the additional workstation on the opposite side of the belt increases the machine's capabilities. TECHNICAL DATA: – Manufacturer: HOUFEK, – Model: HB 1000, – Country of manufacture: Czech Republic, – Year of manufacture: 2006, – Serial number: 590, – Power: 3 kW, Nodpsz S Ed Uefx Akislh – Power supply: 400 V, three-phase, – Frequency: 50 Hz, – Rated current: 6.6 A, – Machine weight: 480 kg. CATALOGUE PARAMETERS OF THE MODEL: – Sanding belt width: 200 mm, – Sanding belt length: 3200 mm, – Dimensions of the work table: 1000 × 400 mm, – Table inclination range: 0–45°. The above catalogue dimensions require confirmation by measurement for the offered unit. EQUIPMENT: – Work table with adjustable inclination, – Additional table on the opposite side of the belt, – Guide with adjustable angle and scale, – Manual adjustment knobs, – Guards for the sanding unit, – Connections for connecting a dust extraction system, – Emergency stop switch. We issue a VAT invoice. Transportation can be arranged for an additional fee. You are welcome to test the machine. Where can you see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE

Condition: new, Year of construction: 2026, Technical Specifications Characteristic Value Total power 10.3 kW Pre-milling motors 2 × 1.8 kW Gluing unit motor 0.75 kW Heater 1.5 kW Edge trimming motors 2 × 0.37 kW Fine milling motors 2 × 0.75 kW Polishing motors 2 × 0.37 kW Conveyor motor 1.1–1.5 kW (depending on the version) Operating speed 8 / 11 / 13 m/min Panel thickness 10–45 mm Edge band thickness 0.4–3 mm Maximum edge band height 45 mm Minimum panel width 80 mm Required air pressure 0.6–0.8 MPa Machine dimensions 4580 × 700 × 1300 mm Packaging dimensions 4280 × 650 × 1280 mm Net / gross weight 1000 / 1230 kg Nlodpfxozl Abrs Akish

Condition: excellent (used), Pre-cutter, adhesive unit for cartridges, guillotine, crosscut saw (front and rear), straight-line cutter, angle cutter, rounding scraper, corner scraper, cut-off saw, polishing machine, year of manufacture 2002. Nlodpfxszik R As Akijh

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 138/1-703 15509125, functionality: fully functional, input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, edge thickness (max.): 15 mm, height adjustment type: electric, actuation type: electric, total height: 2,230 mm, total length: 8,755 mm, total width: 2,416 mm, overall weight: 4,200 kg, Edge banding machine (for laminated boards): Year of manufacture: 2017 Type: LUMINA 1586 PREMIUM Serial number: 138/1-703 15509125 Control system: HOL-HER EDGECONTROL TOUCH PPC 319 Gluing technology used: EVA glue granules GlueJet (exchangeable station), L-Tronic laser (exchangeable station) Units: pre-milling cutters, gluing station, pressure unit, trimming saw (two motors, with pneumatic angle adjustment), milling units (for straight and radius edges), rounding units (2 motors, digitally adjustable), sanding units (profiled and flat), indexing unit (NC axes), polishing unit Workpiece thickness: 8 mm – 60 mm Minimum workpiece width: 150 mm Maximum edge banding thickness: 15 mm Maximum edge banding thickness in roll form: 3 mm Maximum edge banding height: 64 mm Machine length: 8.755 m Width with retracted roller support: 1830 mm Width with extended roller support: 2416 mm Minimum height: 1814 mm Maximum height: 2230 mm Nlsdpfx Ajz I R Snokieh Workpiece inlet height: 877 mm Machine weight: 4200 kg Minimum electrical connection power: AC 400 V 50 Hz + N … 18A Compressed air, working pressure: 6 bar Compressed air, maximum pressure: 8 bar Chip extraction, connections: 2x Fi 120 mm, 2x Fi 140 mm Zero joint: infrared Electrical height adjustment: YES Top belt pressure: YES Maximum feed rate: 25 m/min Feed rate adjustment, stepless: YES Heating zone: YES Spray nozzles: YES Machine documentation: YES Complies with all relevant provisions of the following EC directives: Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2014/30/EU

Condition: reconditioned (used), Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - machine has been completely overhauled: - new Glue Jet 301 glue system (top part 1 mm) - all units inspected - all cutters sharpened - all knives replaced - feed speed: 10 - 18 m/min - workpiece length: min. 160 mm - workpiece width: min. 60 mm - workpiece thickness: 8 - 60 mm - edge thickness: 0.4 - 8 mm - electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW - motorised pressure beam adjustment - automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - infeed fence 1350 mm, motor-adjustable - jointing/trimming unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - cutter, diamond Ø 70 x 64 x 30 mm, Z2, counter-clockwise for jointing unit - cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise for jointing unit - edge feed 1901 fully automatic - adhesive application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - storage hopper for granulate - pressure unit 1913 MOT - end-trimming unit 1918 (60 mm) pneumatic - multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise - profile milling unit 1833 MOT4: - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, counter-clockwise with CM technology - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise with CM technology Nledjzlbpzspfx Akish - scraper unit 1929 MOT2: - carbide indexable inserts for scraper holder R = 2.5 mm (2 pcs. required) - flat scraper 1964 - buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: at short notice Location: 63934 Röllbach

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Swing diameter: 225 mm Turning length: 1,000 mm Diameter over carriage: 1,000 mm Feed rate, continuously variable: 9–400 mm/min Feed rate, continuously variable: 4.5–200 mm/min Travel of steady rest: 360 mm Travel of upper steady rest: 220 mm Tailstock diameter: 60 mm Tailstock travel: 170 mm Tailstock adjustment: ± 20 mm Spindle speed: 225–2,000 min⁻¹ MACHINE DETAILS Manufacturer: Zimmermann Type: DZUE 1000 Year of manufacture: 1990 Machine length: 2,500 mm Machine width: 1,000 mm Machine height: 1,600 mm Nlodpj Ad Ezcofx Akioh Machine weight: 1,000 kg

Year of construction: 2021, operating hours: 2,608 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 06421, COMANDULLI EDILPLUS 8+6 DX model Nljdez Rk Hfspfx Akioh Belt running direction: RIGHT to LEFT, year of manufacture 2021, #06421 • Annual maintenance last performed on 10/08/26 – only 2,608 operating hours • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 2 pneumatic lower and 2 upper chamfer supports (height-adjustable) • Belt infeed: Calibration/profile support, both axes motorized • Pneumatic finishing/stock support • Belt outfeed: Water nozzle support, both axes motorized • Automatic centralized lubrication system • Table extension console, double-row • Space requirement approx.: 630 x 180 cm, infeed and outfeed area: 300 x 60 cm Optional services available, such as: freight, installation and training Pricing • EXW from the machine location, plus VAT, subject to prior sale, no tools included, attachments and accessories in the pictures are not included in the machine/scope of delivery Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty • Machine sold as is, with no warranty of any kind Inspection possibility • at the operating site near Bitburg Availability • after delivery of the new machine, approximately February 2027

Condition: excellent (used), HOLZ-HER Auriga 1308 XL edge banding machine - used PC control with screen, Touchscreen, Swiveling control panel, Program memory, Automatic adjustment of pressure beams, Feed via transport chain, Workpiece support can be extended, Diamond flush trimming cutter in both forward and reverse rotation, Strip magazine, Standby function, Glu Jet cartridge system, Cartridge system with sensing nozzle, Use of PUR adhesives possible, Gluing unit with driven roller, Pneumatic control of the gluing unit, Miter saw with 2 high-frequency motors, Miter saw pneumatically swiveling, Nsdpey T D N Aefx Akielh Flush/radius milling unit, Motorized positioning control for milling unit, Milling tools with diamond coating, Air nozzle on the milling unit, Corner copying unit with diamond-coated cutter, Radius draw blade with motorized positioning, Air nozzle on the radius draw blade, Process-controlled surface draw blade, Air nozzle on the surface draw blade, Spray device for release agents, Spray device for cleaning agents, Edge trimming unit ----- Technical data ----- Edge thickness, roll material: 3 mm, Edge thickness, strip material: 5 mm, Workpiece thickness: 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min, Distance workpiece support: 480 mm, Support plate Ø for edge material: 800 mm, Cutting blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of flush trimming cutter: 0.8/1.2 kW, Power of miter saw: 2x0.45 kW, Power of milling station: 2x0.65 kW, Power of corner copying: 0.3 kW, Power of edge trimming: 2x0.09 kW, Extraction port Ø flush trimming unit: 2x80 mm, Extraction port Ø miter saw: 2x70 mm, Extraction port Ø milling unit: 100 mm, Extraction port Ø draw blade unit: 120 mm, Compressed air connection: 6 bar, Overall length: 5,000 mm, Dimensions (LxWxH): 5,000x1,250x1,720 mm, Weight: 1,300 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - New heater - Cartridge system checked for leaks - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Ready for immediate use